From: Olivier MATZ <olivier.matz@6wind.com>
To: Bruce Richardson <bruce.richardson@intel.com>
Cc: Olivier Matz <olivier.matz@6wind.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] [RFC 0/8] mbuf: structure reorganization
Date: Tue, 24 Jan 2017 17:16:40 +0100 [thread overview]
Message-ID: <20170124171640.0f4a8d4e@glumotte.dev.6wind.com> (raw)
In-Reply-To: <20170124155908.GB172024@bricha3-MOBL3.ger.corp.intel.com>
On Tue, 24 Jan 2017 15:59:08 +0000, Bruce Richardson
<bruce.richardson@intel.com> wrote:
> On Tue, Jan 24, 2017 at 04:19:25PM +0100, Olivier Matz wrote:
> > Based on discussion done in [1], this patchset reorganizes the mbuf.
> >
>
> Hi Olivier,
>
> thanks for all the work on this. From a quick scan of the patches, and
> the description below, it looks like a good set of changes. Comments
> below to see about kick-starting some further discussion about some of
> the other changes you propose.
>
> > The main changes are:
> > - reorder structure to increase vector performance on some non-ia
> > platforms.
> > - add a 64bits timestamp field in the 1st cache line
> > - m->next, m->nb_segs, and m->refcnt are always initialized for
> > mbufs in the pool, avoiding the need of setting m->next (located in
> > the 2nd cache line) in the Rx path for mono-segment packets.
> > - change port and nb_segs to 16 bits
> > - move seqn in the 2nd cache line
> >
> > Things discussed but not done in the patchset:
> > - move refcnt and nb_segs to the 2nd cache line: many drivers sets
> > them in the Rx path, so it could introduce a performance
> > regression, or it would require to change all the drivers, which is
> > not an easy task.
>
> But if we do make this change and update the drivers, some of them
> should perform a little better, since they do fewer writes. I don't
> think the fastest vector drivers will be affected, since they already
> coalesce the writes to these fields with other writes, but others
> drivers may well be improved by the change.
Yes, that's something I forgot to say in the cover letter: after this
patchset, the Rx path of drivers could be optimized a bit by removing
writes to m->next, m->nb_segs and m->refcnt. The patch 4/8 gives an
idea of what could be done.
Once most drivers are updated, we could reconsider moving nb_segs and
refcnt in the second cache line.
>
> > - remove the m->port field: too much impact on many examples and
> > libraries, and some people highlighted they are using it.
> > - moving m->next in the 1st cache line: there is not enough room,
> > and having it set to NULL for unused mbuf should remove the need
> > for it.
>
> I agree.
>
> > - merge seqn and timestamp together in a union: we could imagine
> > use cases were both are activated. There is no flag indicating the
> > presence of seqn, so it looks preferable to keep them separated for
> > now.
>
> What were the use-cases? If we have a timestamp, surely sequence can
> be determined from that? Even if you use the TSC as a timestamp per
> burst, you can still sequence the packets cheaply by just adding 1 to
> each subsequent value.
Assuming the timestamp is in nanosecond, it is not a sequence number,
so I'm not sure it should be hijacked for this purpose. A timestamp can
be used to reorder packets, but having a sequence number is better
because you can be sure that when you get packets 1, 3, 2, 0 that no
packet is missing between 0 and 3.
For that reason, I guess both features could be used at the same time.
Regards,
Olivier
next prev parent reply other threads:[~2017-01-24 16:16 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 15:19 Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 1/8] mbuf: make segment prefree function public Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 2/8] mbuf: make raw free " Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-01-24 15:50 ` Bruce Richardson
2017-02-28 14:51 ` Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 4/8] net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-01-24 15:19 ` [dpdk-dev] [RFC 8/8] mbuf: add a timestamp field Olivier Matz
2017-01-24 15:59 ` [dpdk-dev] [RFC 0/8] mbuf: structure reorganization Bruce Richardson
2017-01-24 16:16 ` Olivier MATZ [this message]
2017-02-06 18:41 ` Ananyev, Konstantin
2017-02-09 16:20 ` Morten Brørup
2017-02-09 16:56 ` Ananyev, Konstantin
2017-02-16 13:48 ` Olivier Matz
2017-02-16 15:46 ` Bruce Richardson
2017-02-16 16:14 ` Olivier Matz
2017-02-21 14:20 ` Morten Brørup
2017-02-21 14:28 ` Bruce Richardson
2017-02-21 15:04 ` Olivier MATZ
2017-02-21 15:18 ` Bruce Richardson
2017-02-21 15:18 ` Morten Brørup
2017-02-19 19:04 ` Chilikin, Andrey
2017-02-21 9:53 ` Olivier MATZ
2017-02-16 17:26 ` Jan Blunck
2017-02-17 10:51 ` Olivier Matz
2017-02-17 12:49 ` Nélio Laranjeiro
2017-02-17 13:51 ` Jan Blunck
2017-02-18 5:48 ` Andrew Rybchenko
2017-02-17 13:38 ` Jan Blunck
2017-02-17 14:17 ` Olivier Matz
2017-02-17 18:42 ` Ananyev, Konstantin
2017-02-21 9:53 ` Olivier MATZ
2017-02-21 10:28 ` Ananyev, Konstantin
2017-02-20 9:27 ` Jan Blunck
2017-02-21 9:54 ` Olivier MATZ
2017-02-21 16:12 ` Jan Blunck
2017-02-21 16:38 ` Bruce Richardson
2017-02-21 17:04 ` Jan Blunck
2017-02-21 17:26 ` Ananyev, Konstantin
2017-02-21 19:17 ` Jan Blunck
2017-02-21 20:30 ` Ananyev, Konstantin
2017-02-21 21:51 ` Morten Brørup
2017-02-24 14:11 ` Olivier Matz
2017-02-24 14:00 ` Olivier Matz
2017-02-24 14:21 ` Bruce Richardson
2017-02-28 8:55 ` Jan Blunck
2017-02-28 9:05 ` Ananyev, Konstantin
2017-02-28 9:23 ` Olivier Matz
2017-02-28 9:33 ` Jan Blunck
2017-02-28 10:29 ` Ananyev, Konstantin
2017-02-28 10:50 ` Olivier Matz
2017-02-28 11:48 ` Ananyev, Konstantin
2017-02-28 12:28 ` Olivier Matz
2017-02-28 22:53 ` Ananyev, Konstantin
2017-03-02 16:46 ` Olivier Matz
2017-03-08 11:11 ` Ananyev, Konstantin
2017-03-20 9:00 ` Olivier Matz
2017-03-22 17:42 ` Ananyev, Konstantin
2017-03-24 8:35 ` Jerin Jacob
2017-03-24 13:35 ` Olivier Matz
2017-02-28 9:25 ` Jan Blunck
2017-02-19 23:45 ` Ananyev, Konstantin
2017-02-21 9:22 ` Morten Brørup
2017-02-21 9:54 ` Olivier MATZ
2017-03-08 9:41 ` [dpdk-dev] [PATCH 0/9] " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 1/9] mbuf: make segment prefree function public Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 2/9] mbuf: make raw free " Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 3/9] mbuf: set mbuf fields while in pool Olivier Matz
2017-03-31 11:21 ` Bruce Richardson
2017-03-31 11:51 ` Ananyev, Konstantin
2017-03-08 9:41 ` [dpdk-dev] [PATCH 4/9] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 5/9] mbuf: make rearm data address naturally aligned Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 6/9] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-03-08 9:41 ` [dpdk-dev] [PATCH 7/9] mbuf: move sequence number in second cache line Olivier Matz
2017-03-08 9:42 ` [dpdk-dev] [PATCH 8/9] mbuf: add a timestamp field Olivier Matz
2017-04-04 10:29 ` [dpdk-dev] [PATCH 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-07 15:13 ` Ferruh Yigit
2017-04-07 15:44 ` Ferruh Yigit
2017-04-09 22:56 ` Ananyev, Konstantin
2017-04-04 10:29 ` [dpdk-dev] [PATCH 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 0/2] reduce writes to mbuf in ixgbe vRX Konstantin Ananyev
2017-04-10 16:17 ` Ferruh Yigit
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 1/2] net/ixgbe: eliminate mbuf write on rearm Konstantin Ananyev
2017-04-10 15:59 ` [dpdk-dev] [PATCH v2 2/2] net/ixgbe: remove option to disable offload flags Konstantin Ananyev
2017-04-04 10:29 ` [dpdk-dev] [PATCH " Konstantin Ananyev
2017-03-08 9:42 ` [dpdk-dev] [PATCH 9/9] mbuf: reorder VLAN tci and buffer len fields Olivier Matz
2017-03-29 15:56 ` [dpdk-dev] [PATCH 0/9] mbuf: structure reorganization Olivier Matz
2017-03-29 16:03 ` Morten Brørup
2017-03-29 20:09 ` Bruce Richardson
2017-03-30 9:31 ` Bruce Richardson
2017-03-30 12:02 ` Olivier Matz
2017-03-30 12:23 ` Bruce Richardson
2017-03-30 16:45 ` Ananyev, Konstantin
2017-03-30 16:47 ` Ananyev, Konstantin
2017-03-30 18:06 ` Ananyev, Konstantin
2017-03-31 8:41 ` Olivier Matz
2017-03-31 9:58 ` Ananyev, Konstantin
2017-03-31 1:00 ` Ananyev, Konstantin
2017-03-31 7:21 ` Morten Brørup
2017-03-31 8:26 ` Olivier Matz
2017-03-31 8:41 ` Bruce Richardson
2017-03-31 8:59 ` Olivier Matz
2017-03-31 9:18 ` Ananyev, Konstantin
2017-03-31 9:36 ` Olivier Matz
2017-04-03 16:15 ` Thomas Monjalon
2017-04-04 7:58 ` Olivier MATZ
2017-04-04 8:53 ` Bruce Richardson
2017-03-31 9:23 ` Bruce Richardson
2017-03-31 11:18 ` Nélio Laranjeiro
2017-03-30 14:54 ` Andrew Rybchenko
2017-03-30 15:12 ` Jerin Jacob
2017-04-04 16:27 ` [dpdk-dev] [PATCH v2 0/8] " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 1/8] mbuf: make segment prefree function public Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 2/8] mbuf: make raw free " Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 3/8] mbuf: set mbuf fields while in pool Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 4/8] drivers/net: don't touch mbuf next or nb segs on Rx Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 5/8] mbuf: make rearm data address naturally aligned Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Olivier Matz
2017-04-06 5:45 ` Yuanhan Liu
2017-04-18 13:03 ` Olivier MATZ
2017-07-04 7:54 ` Wang, Zhihong
2017-07-10 8:00 ` Olivier Matz
2017-07-10 8:15 ` Morten Brørup
2017-07-11 13:25 ` Wiles, Keith
2017-07-11 13:30 ` Morten Brørup
2017-07-11 15:05 ` Thomas Monjalon
2017-07-11 15:23 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Morten Brørup
2017-07-11 16:48 ` Wiles, Keith
2017-07-12 7:25 ` Morten Brørup
2017-07-12 9:02 ` Yang, Zhiyong
2017-07-12 9:50 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port andnbsegments Morten Brørup
2017-07-12 15:35 ` Stephen Hemminger
2017-07-12 15:57 ` Morten Brørup
2017-07-12 16:23 ` Thomas Monjalon
2017-07-12 18:20 ` Wiles, Keith
2017-07-21 15:03 ` Bruce Richardson
2017-07-12 15:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nbsegments Wiles, Keith
2017-07-11 13:34 ` [dpdk-dev] [PATCH v2 6/8] mbuf: use 2 bytes for port and nb segments Wiles, Keith
2017-07-11 13:46 ` Olivier MATZ
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 7/8] mbuf: move sequence number in second cache line Olivier Matz
2017-04-04 16:28 ` [dpdk-dev] [PATCH v2 8/8] mbuf: add a timestamp field Olivier Matz
2017-04-05 9:37 ` [dpdk-dev] [PATCH v2 0/8] mbuf: structure reorganization Thomas Monjalon
2017-04-05 9:46 ` Olivier MATZ
2017-04-05 9:48 ` Richardson, Bruce
2017-04-05 12:06 ` Ferruh Yigit
2017-04-14 13:10 ` Ferruh Yigit
2017-04-18 13:04 ` Olivier MATZ
2017-04-19 9:39 ` Thomas Monjalon
2017-04-19 12:28 ` Olivier MATZ
2017-04-19 12:56 ` Thomas Monjalon
2017-04-19 13:03 ` Ferruh Yigit
2017-04-19 13:12 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170124171640.0f4a8d4e@glumotte.dev.6wind.com \
--to=olivier.matz@6wind.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).