From: Keith Wiles <keith.wiles@intel.com>
To: dev@dpdk.org
Cc: pascal.mazon@6wind.com
Subject: [dpdk-dev] [PATCH 4/5] net/tap: fix up log message to correct channel
Date: Thu, 2 Feb 2017 16:33:29 -0600 [thread overview]
Message-ID: <20170202223330.39240-4-keith.wiles@intel.com> (raw)
In-Reply-To: <20170202223330.39240-1-keith.wiles@intel.com>
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
---
drivers/net/tap/rte_eth_tap.c | 39 +++++++++++++++++++--------------------
1 file changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index 6673182..4f7eacf 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -167,7 +167,7 @@ tun_alloc(char *name, uint16_t qid)
/* Set the TUN/TAP configuration and get the name if needed */
if (ioctl(fd, TUNSETIFF, (void *)&ifr) < 0) {
- RTE_LOG(ERR, PMD, "Unable to set TUNSETIFF for %s\n",
+ RTE_LOG(WARNING, PMD, "Unable to set TUNSETIFF for %s\n",
ifr.ifr_name);
perror("TUNSETIFF");
goto error;
@@ -206,7 +206,7 @@ pmd_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
/* allocate the next mbuf */
mbuf = rte_pktmbuf_alloc(rxq->mp);
if (unlikely(!mbuf)) {
- RTE_LOG(WARNING, PMD, "Unable to allocate mbuf\n");
+ RTE_LOG(WARNING, PMD, "TAP unable to allocate mbuf\n");
break;
}
@@ -559,8 +559,8 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
int fd;
if ((rx_queue_id >= internals->nb_queues) || !mp) {
- RTE_LOG(ERR, PMD, "nb_queues %d mp %p\n",
- internals->nb_queues, mp);
+ RTE_LOG(WARNING, PMD, "nb_queues %d too small or mempool NULL\n",
+ internals->nb_queues);
return -1;
}
@@ -572,7 +572,7 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
RTE_PKTMBUF_HEADROOM);
if (buf_size < ETH_FRAME_LEN) {
- RTE_LOG(ERR, PMD,
+ RTE_LOG(WARNING, PMD,
"%s: %d bytes will not fit in mbuf (%d bytes)\n",
dev->data->name, ETH_FRAME_LEN, buf_size);
return -ENOMEM;
@@ -582,7 +582,7 @@ tap_rx_queue_setup(struct rte_eth_dev *dev,
if (fd == -1)
return -1;
- RTE_LOG(INFO, PMD, "RX TAP device name %s, qid %d on fd %d\n",
+ RTE_LOG(DEBUG, PMD, " RX TAP device name %s, qid %d on fd %d\n",
internals->name, rx_queue_id, internals->rxq[rx_queue_id].fd);
return 0;
@@ -605,7 +605,7 @@ tap_tx_queue_setup(struct rte_eth_dev *dev,
if (ret == -1)
return -1;
- RTE_LOG(INFO, PMD, "TX TAP device name %s, qid %d on fd %d\n",
+ RTE_LOG(DEBUG, PMD, " TX TAP device name %s, qid %d on fd %d\n",
internals->name, tx_queue_id, internals->txq[tx_queue_id].fd);
return 0;
@@ -643,7 +643,7 @@ pmd_mac_address(int fd, struct rte_eth_dev *dev, struct ether_addr *addr)
memset(&ifr, 0, sizeof(ifr));
if (ioctl(fd, SIOCGIFHWADDR, &ifr) == -1) {
- RTE_LOG(ERR, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
+ RTE_LOG(WARNING, PMD, "ioctl failed (SIOCGIFHWADDR) (%s)\n",
ifr.ifr_name);
return -1;
}
@@ -662,26 +662,25 @@ eth_dev_tap_create(const char *name, char *tap_name)
struct rte_eth_dev_data *data = NULL;
int i, fd = -1;
- RTE_LOG(INFO, PMD,
- "%s: Create TAP Ethernet device with %d queues on numa %u\n",
- name, RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
+ RTE_LOG(DEBUG, PMD, " TAP device with %d queues on numa %u\n",
+ RTE_PMD_TAP_MAX_QUEUES, rte_socket_id());
data = rte_zmalloc_socket(tap_name, sizeof(*data), 0, numa_node);
if (!data) {
- RTE_LOG(ERR, PMD, "Failed to allocate data\n");
+ RTE_LOG(ERR, PMD, "TAP Failed to allocate data\n");
goto error_exit;
}
pmd = rte_zmalloc_socket(tap_name, sizeof(*pmd), 0, numa_node);
if (!pmd) {
- RTE_LOG(ERR, PMD, "Unable to allocate internal struct\n");
+ RTE_LOG(ERR, PMD, "TAP Unable to allocate internal struct\n");
goto error_exit;
}
/* Use the name and not the tap_name */
dev = rte_eth_dev_allocate(tap_name);
if (!dev) {
- RTE_LOG(ERR, PMD, "Unable to allocate device struct\n");
+ RTE_LOG(ERR, PMD, "TAP Unable to allocate device struct\n");
goto error_exit;
}
@@ -712,7 +711,7 @@ eth_dev_tap_create(const char *name, char *tap_name)
/* Create the first Tap device */
fd = tun_alloc(tap_name, 0);
if (fd < 0) {
- RTE_LOG(ERR, PMD, "tun_alloc() failed\n");
+ RTE_LOG(ERR, PMD, "TAP tun_alloc() failed for %s\n", tap_name);
goto error_exit;
}
@@ -734,7 +733,7 @@ eth_dev_tap_create(const char *name, char *tap_name)
return 0;
error_exit:
- RTE_PMD_DEBUG_TRACE("Unable to initialize %s\n", name);
+ RTE_LOG(DEBUG, PMD, "TAP Unable to initialize %s\n", name);
if (fd > 0)
close(fd);
@@ -787,7 +786,7 @@ rte_pmd_tap_probe(const char *name, const char *params)
DEFAULT_TAP_NAME, tap_unit++);
if (params && (params[0] != '\0')) {
- RTE_LOG(INFO, PMD, "paramaters (%s)\n", params);
+ RTE_LOG(DEBUG, PMD, "paramaters (%s)\n", params);
kvlist = rte_kvargs_parse(params, valid_arguments);
if (kvlist) {
@@ -812,14 +811,14 @@ rte_pmd_tap_probe(const char *name, const char *params)
}
pmd_link.link_speed = speed;
- RTE_LOG(INFO, PMD, "Initializing pmd_tap for %s as %s\n",
+ RTE_LOG(NOTICE, PMD, "Initializing pmd_tap for %s as %s\n",
name, tap_name);
ret = eth_dev_tap_create(name, tap_name);
leave:
if (ret == -1) {
- RTE_LOG(INFO, PMD, "Failed to create pmd for %s as %s\n",
+ RTE_LOG(ERR, PMD, "Failed to create pmd for %s as %s\n",
name, tap_name);
tap_unit--; /* Restore the unit number */
}
@@ -837,7 +836,7 @@ rte_pmd_tap_remove(const char *name)
struct pmd_internals *internals;
int i;
- RTE_LOG(INFO, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
+ RTE_LOG(DEBUG, PMD, "Closing TUN/TAP Ethernet device on numa %u\n",
rte_socket_id());
/* find the ethdev entry */
--
2.8.0.GIT
next prev parent reply other threads:[~2017-02-02 22:34 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 22:33 [dpdk-dev] [PATCH 1/5] nic/tap: fix tap docs for device name Keith Wiles
2017-02-02 22:33 ` [dpdk-dev] [PATCH 2/5] net/tap: fix multi-queue support Keith Wiles
2017-02-03 9:37 ` Pascal Mazon
2017-02-03 20:32 ` Wiles, Keith
2017-02-02 22:33 ` [dpdk-dev] [PATCH 3/5] net/tap: remove redundant fds array Keith Wiles
2017-02-03 9:38 ` Pascal Mazon
2017-02-02 22:33 ` Keith Wiles [this message]
2017-02-03 9:45 ` [dpdk-dev] [PATCH 4/5] net/tap: fix up log message to correct channel Pascal Mazon
2017-02-02 22:33 ` [dpdk-dev] [PATCH 5/5] net/tap: remove unused variable and minor cleanup Keith Wiles
2017-02-03 9:47 ` Pascal Mazon
2017-02-03 9:32 ` [dpdk-dev] [PATCH 1/5] nic/tap: fix tap docs for device name Pascal Mazon
2017-02-03 11:48 ` Ferruh Yigit
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 1/6] net/tap: " Keith Wiles
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 2/6] net/tap: remove redundant fds array Keith Wiles
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 3/6] net/tap: remove unused variable and minor cleanup Keith Wiles
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 4/6] net/tap: fix multi-queue support Keith Wiles
2017-02-06 15:45 ` Pascal Mazon
2017-02-06 15:57 ` Wiles, Keith
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 5/6] net/tap: cleanup log messages Keith Wiles
2017-02-05 16:05 ` [dpdk-dev] [PATCH v2 6/6] net/tap: link set down must be before close Keith Wiles
2017-02-06 15:57 ` Pascal Mazon
2017-02-06 16:03 ` Wiles, Keith
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 1/7] net/tap: fix tap docs for device name Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 2/7] net/tap: remove redundant fds array Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 3/7] net/tap: remove unused variable and minor cleanup Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 4/7] net/tap: fix multi-queue support Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 5/7] net/tap: cleanup log messages Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 6/7] net/tap: link set down must be done before close Keith Wiles
2017-02-06 19:40 ` [dpdk-dev] [PATCH v3 7/7] net/tap: move closing fds to pmd close from pmd stop Keith Wiles
2017-02-07 8:51 ` Pascal Mazon
2017-02-07 14:06 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170202223330.39240-4-keith.wiles@intel.com \
--to=keith.wiles@intel.com \
--cc=dev@dpdk.org \
--cc=pascal.mazon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).