From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH v3 18/26] net/bnxt: add support for led on/off
Date: Wed, 31 May 2017 22:02:24 -0500 [thread overview]
Message-ID: <20170601030232.38677-19-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20170601030232.38677-1-ajit.khaparde@broadcom.com>
This patch adds support for dev_led_on/off dev_ops
HWRM calls added:
bnxt_hwrm_port_led_qcaps()
bnxt_hwrm_port_led_cfg()
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
--
v1-v2:
- rebasing to next-net tree
- Use net/bnxt instead of just bnxt in patch subject
- Update bnxt.ini indicating support for LED on/off
---
doc/guides/nics/features/bnxt.ini | 1 +
drivers/net/bnxt/bnxt.h | 39 ++
drivers/net/bnxt/bnxt_ethdev.c | 20 +
drivers/net/bnxt/bnxt_hwrm.c | 70 +++
drivers/net/bnxt/bnxt_hwrm.h | 2 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 977 +++++++++++++++++++++++++++++++++
6 files changed, 1109 insertions(+)
diff --git a/doc/guides/nics/features/bnxt.ini b/doc/guides/nics/features/bnxt.ini
index 4fd8abb..f582836 100644
--- a/doc/guides/nics/features/bnxt.ini
+++ b/doc/guides/nics/features/bnxt.ini
@@ -20,6 +20,7 @@ FW version = Y
Jumbo frame = Y
MTU update = Y
LRO = Y
+LED = Y
Linux VFIO = Y
Linux UIO = Y
x86-64 = Y
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index e411704..c23a836 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -47,6 +47,42 @@
#define BNXT_MAX_MTU 9500
#define VLAN_TAG_SIZE 4
+#define BNXT_MAX_LED 4
+
+struct bnxt_led_info {
+ uint8_t led_id;
+ uint8_t led_type;
+ uint8_t led_group_id;
+ uint8_t unused;
+ uint16_t led_state_caps;
+#define BNXT_LED_ALT_BLINK_CAP(x) ((x) & \
+ rte_cpu_to_le_16(HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT))
+
+ uint16_t led_color_caps;
+};
+
+struct bnxt_led_cfg {
+ uint8_t led_id;
+ uint8_t led_state;
+ uint8_t led_color;
+ uint8_t unused;
+ uint16_t led_blink_on;
+ uint16_t led_blink_off;
+ uint8_t led_group_id;
+ uint8_t rsvd;
+};
+
+#define BNXT_LED_DFLT_ENA \
+ (HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID | \
+ HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE | \
+ HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON | \
+ HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF | \
+ HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID)
+
+#define BNXT_LED_DFLT_ENA_SHIFT 6
+
+#define BNXT_LED_DFLT_ENABLES(x) \
+ rte_cpu_to_le_32(BNXT_LED_DFLT_ENA << (BNXT_LED_DFLT_ENA_SHIFT * (x)))
enum bnxt_hw_context {
HW_CONTEXT_NONE = 0,
@@ -205,6 +241,9 @@ struct bnxt {
uint16_t geneve_fw_dst_port_id;
uint32_t fw_ver;
rte_atomic64_t rx_mbuf_alloc_fail;
+
+ struct bnxt_led_info leds[BNXT_MAX_LED];
+ uint8_t num_leds;
};
/*
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 4576156..de901eb 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1497,6 +1497,22 @@ bnxt_vlan_pvid_set_op(struct rte_eth_dev *dev, uint16_t pvid, int on)
return rc;
}
+static int
+bnxt_dev_led_on_op(struct rte_eth_dev *dev)
+{
+ struct bnxt *bp = (struct bnxt *)dev->data->dev_private;
+
+ return bnxt_hwrm_port_led_cfg(bp, true);
+}
+
+static int
+bnxt_dev_led_off_op(struct rte_eth_dev *dev)
+{
+ struct bnxt *bp = (struct bnxt *)dev->data->dev_private;
+
+ return bnxt_hwrm_port_led_cfg(bp, false);
+}
+
/*
* Initialization
*/
@@ -1542,6 +1558,8 @@ static const struct eth_dev_ops bnxt_dev_ops = {
.set_mc_addr_list = bnxt_dev_set_mc_addr_list_op,
.rxq_info_get = bnxt_rxq_info_get_op,
.txq_info_get = bnxt_txq_info_get_op,
+ .dev_led_on = bnxt_dev_led_on_op,
+ .dev_led_off = bnxt_dev_led_off_op,
};
static bool bnxt_vf_pciid(uint16_t id)
@@ -1815,6 +1833,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
}
}
+ bnxt_hwrm_port_led_qcaps(bp);
+
rc = bnxt_setup_int(bp);
if (rc)
goto error_free;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index a1aa80e..9a04885 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2453,3 +2453,73 @@ int bnxt_hwrm_port_clr_stats(struct bnxt *bp)
HWRM_CHECK_RESULT;
return rc;
}
+
+int bnxt_hwrm_port_led_qcaps(struct bnxt *bp)
+{
+ struct hwrm_port_led_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_port_led_qcaps_input req = {0};
+ int rc;
+
+ if (BNXT_VF(bp))
+ return 0;
+
+ HWRM_PREP(req, PORT_LED_QCAPS, -1, resp);
+ req.port_id = bp->pf.port_id;
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ if (resp->num_leds > 0 && resp->num_leds < BNXT_MAX_LED) {
+ unsigned int i;
+
+ bp->num_leds = resp->num_leds;
+ memcpy(bp->leds, &resp->led0_id,
+ sizeof(bp->leds[0]) * bp->num_leds);
+ for (i = 0; i < bp->num_leds; i++) {
+ struct bnxt_led_info *led = &bp->leds[i];
+
+ uint16_t caps = led->led_state_caps;
+
+ if (!led->led_group_id ||
+ !BNXT_LED_ALT_BLINK_CAP(caps)) {
+ bp->num_leds = 0;
+ break;
+ }
+ }
+ }
+ return rc;
+}
+
+int bnxt_hwrm_port_led_cfg(struct bnxt *bp, bool led_on)
+{
+ struct hwrm_port_led_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+ struct hwrm_port_led_cfg_input req = {0};
+ struct bnxt_led_cfg *led_cfg;
+ uint8_t led_state = HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT;
+ uint16_t duration = 0;
+ int rc, i;
+
+ if (!bp->num_leds || BNXT_VF(bp))
+ return -EOPNOTSUPP;
+
+ HWRM_PREP(req, PORT_LED_CFG, -1, resp);
+ if (led_on) {
+ led_state = HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT;
+ duration = rte_cpu_to_le_16(500);
+ }
+ req.port_id = bp->pf.port_id;
+ req.num_leds = bp->num_leds;
+ led_cfg = (struct bnxt_led_cfg *)&req.led0_id;
+ for (i = 0; i < bp->num_leds; i++, led_cfg++) {
+ req.enables |= BNXT_LED_DFLT_ENABLES(i);
+ led_cfg->led_id = bp->leds[i].led_id;
+ led_cfg->led_state = led_state;
+ led_cfg->led_blink_on = duration;
+ led_cfg->led_blink_off = duration;
+ led_cfg->led_group_id = bp->leds[i].led_group_id;
+ }
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index ab42913..3591917 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -130,4 +130,6 @@ void bnxt_free_tunnel_ports(struct bnxt *bp);
int bnxt_hwrm_set_default_vlan(struct bnxt *bp, int vf, uint8_t is_vf);
int bnxt_hwrm_port_qstats(struct bnxt *bp);
int bnxt_hwrm_port_clr_stats(struct bnxt *bp);
+int bnxt_hwrm_port_led_cfg(struct bnxt *bp, bool led_on);
+int bnxt_hwrm_port_led_qcaps(struct bnxt *bp);
#endif
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 2fcfce6..17a912f 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -5743,6 +5743,983 @@ struct hwrm_port_clr_stats_output {
*/
} __attribute__((packed));
+/* hwrm_port_led_cfg */
+/*
+ * Description: This function is used to configure LEDs on a given port. Each
+ * port has individual set of LEDs associated with it. These LEDs are used for
+ * speed/link configuration as well as activity indicator configuration. Up to
+ * three LEDs can be configured, one for activity and two for speeds.
+ */
+/* Input (64 bytes) */
+struct hwrm_port_led_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the led0_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1)
+ /* This bit must be '1' for the led0_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2)
+ /* This bit must be '1' for the led0_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20)
+ /* This bit must be '1' for the led1_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40)
+ /* This bit must be '1' for the led1_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80)
+ /* This bit must be '1' for the led1_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the led1_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the led1_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the led1_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800)
+ /* This bit must be '1' for the led2_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000)
+ /* This bit must be '1' for the led2_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000)
+ /* This bit must be '1' for the led2_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the led2_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the led2_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the led2_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000)
+ /* This bit must be '1' for the led3_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000)
+ /* This bit must be '1' for the led3_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000)
+ /* This bit must be '1' for the led3_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the led3_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the led3_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the led3_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000)
+ uint16_t port_id;
+ /* Port ID of port whose LEDs are configured. */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are being configured. Up to 4 LEDs
+ * can be configured with this command.
+ */
+ uint8_t rsvd;
+ /* Reserved field. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_state;
+ /* The requested state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The requested color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #0 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd0;
+ /* Reserved field. */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_state;
+ /* The requested state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The requested color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #1 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd1;
+ /* Reserved field. */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_state;
+ /* The requested state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The requested color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #2 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd2;
+ /* Reserved field. */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_state;
+ /* The requested state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The requested color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #3 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd3;
+ /* Reserved field. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_led_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcfg */
+/*
+ * Description: This function is used to query configuration of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration. Up to three LEDs can be configured, one for activity and two
+ * for speeds.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (56 bytes) */
+struct hwrm_port_led_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_state;
+ /* The current state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 is not grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_state;
+ /* The current state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 is not grouped. For all other
+ * non-zero values of this field, LED #1 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_state;
+ /* The current state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 is not grouped. For all other
+ * non-zero values of this field, LED #2 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_state;
+ /* The current state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 is not grouped. For all other
+ * non-zero values of this field, LED #3 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t unused_8;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcaps */
+/*
+ * Description: This function is used to query capabilities of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (48 bytes) */
+struct hwrm_port_led_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t unused_0[3];
+ /* Reserved for future use. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_1;
+ uint16_t led0_state_caps;
+ /* The states supported by LED #0. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led0_color_caps;
+ /* The colors supported by LED #0. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_2;
+ uint16_t led1_state_caps;
+ /* The states supported by LED #1. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led1_color_caps;
+ /* The colors supported by LED #1. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_3;
+ uint16_t led2_state_caps;
+ /* The states supported by LED #2. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led2_color_caps;
+ /* The colors supported by LED #2. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t led3_state_caps;
+ /* The states supported by LED #3. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led3_color_caps;
+ /* The colors supported by LED #3. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_queue_qportcfg */
/*
* Description: This function is called by a driver to query queue configuration
--
2.10.1 (Apple Git-78)
next prev parent reply other threads:[~2017-06-01 3:02 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 1:57 [dpdk-dev] [PATCH 00/23] bnxt patchset Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 01/23] bnxt: add various hwrm input/output structures Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 02/23] bnxt: code reorg to properly allocate resources in PF/VF modes Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 03/23] bnxt: add tunneling support Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 04/23] bnxt: support lack of huge pages Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 05/23] bnxt: add functions for tx_loopback, set_vf_mac and queues_drop_en Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 06/23] bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 07/23] bnxt: add support for VLAN stripq, VLAN anti spoof and VLAN filtering for VFs Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 08/23] bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-05-18 1:57 ` [dpdk-dev] [PATCH 09/23] bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 10/23] bnxt: add support to add a VF MAC address Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 11/23] bnxt: add support for xstats get/reset Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 12/23] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 13/23] bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 14/23] bnxt: add support for set_mc_addr_list and mac_addr_set Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 15/23] bnxt: add support for fw_version_get dev_op Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 16/23] bnxt: add support to set MTU Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 17/23] bnxt: add support for LRO Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 18/23] bnxt: add rxq_info_get and txq_info_get dev_ops Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 19/23] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 20/23] bnxt: reorg the query stats code Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 21/23] bnxt: update to HWRM version 1.7.5 Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 22/23] bnxt: Add support to set VF rxmode Ajit Khaparde
2017-05-18 1:58 ` [dpdk-dev] [PATCH 23/23] bnxt: add code to support vlan_pvid_set dev_op Ajit Khaparde
2017-05-22 10:55 ` [dpdk-dev] [PATCH 00/23] bnxt patchset Ferruh Yigit
2017-05-22 23:02 ` Thomas Monjalon
2017-05-23 17:58 ` Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 00/25] " Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 01/25] bnxt: update to new HWRM version Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 02/25] bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 03/25] bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 04/25] bnxt: support lack of huge pages Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 05/25] bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 06/25] bnxt: add tunneling support Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 07/25] bnxt: add support for xstats get/reset Ajit Khaparde
2017-05-29 17:42 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 08/25] bnxt: Add support for VLAN filter and strip dev_ops Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 09/25] bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-05-29 17:42 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 10/25] bnxt: add support for fw_version_get dev_op Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 11/25] bnxt: add support to set MTU Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 12/25] bnxt: add support for LRO Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 13/25] bnxt: add rxq/txq info_get dev_ops Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 14/25] bnxt: add code to support VLAN pvid set dev_op Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 15/25] bnxt: reorg the query stats code Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 16/25] bnxt: add support for led on/off Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 17/25] bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 18/25] bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 19/25] bnxt: add support for VLAN stripq, anti spoof and filtering for VFs Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 20/25] bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-31 2:12 ` Ajit Khaparde
2017-05-31 9:57 ` Ferruh Yigit
2017-05-31 14:27 ` Ajit Khaparde
2017-05-31 14:46 ` Ferruh Yigit
2017-05-31 16:15 ` Thomas Monjalon
2017-05-31 18:41 ` Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 21/25] bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-05-29 17:43 ` Ferruh Yigit
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 22/25] bnxt: add support to add a VF MAC address Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 23/25] bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 24/25] bnxt: Add support to set VF rxmode Ajit Khaparde
2017-05-26 18:39 ` [dpdk-dev] [PATCH v2 25/25] update release notes Ajit Khaparde
2017-05-29 17:44 ` Ferruh Yigit
2017-05-29 17:44 ` [dpdk-dev] [PATCH v2 00/25] bnxt patchset Ferruh Yigit
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 00/26] " Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 01/26] net/bnxt: update to new HWRM version Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 02/26] net/bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 03/26] net/bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 04/26] net/bnxt: support lack of huge pages Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 05/26] net/bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 06/26] net/bnxt: add tunneling support Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 07/26] net/bnxt: add support for xstats get/reset Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 08/26] net/bnxt: add support for VLAN filter and strip Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 09/26] net/bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 10/26] doc: update bnxt.ini to document Allmulticast mode Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 11/26] net/bnxt: add support to get fw version Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 12/26] net/bnxt: add support to set MTU Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 13/26] net/bnxt: add support for LRO Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 14/26] net/bnxt: add rxq/txq info_get Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 15/26] net/bnxt: add code to support VLAN pvid Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 16/26] net/bnxt: reorg the query stats code Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 17/26] doc: update default.ini to add LED support Ajit Khaparde
2017-06-01 3:02 ` Ajit Khaparde [this message]
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 19/26] net/bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 20/26] net/bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 21/26] net/bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 22/26] net/bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-06-01 12:28 ` Ferruh Yigit
2017-06-01 16:36 ` Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 23/26] net/bnxt: add support to add a VF MAC address Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 24/26] net/bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 25/26] net/bnxt: add support to set VF rxmode Ajit Khaparde
2017-06-01 3:02 ` [dpdk-dev] [PATCH v3 26/26] doc: update release notes Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 00/26] bnxt patchset Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 01/26] net/bnxt: update to new HWRM version Ajit Khaparde
2017-06-01 17:06 ` [dpdk-dev] [PATCH v4 02/26] net/bnxt: code reorg to properly allocate resources for PF/VF Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 03/26] net/bnxt: handle VF/PF initialization appropriately Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 04/26] net/bnxt: support lack of huge pages Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 05/26] net/bnxt: add additonal HWRM debug info to error messages Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 06/26] net/bnxt: add tunneling support Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 07/26] net/bnxt: add support for xstats get/reset Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 08/26] net/bnxt: add support for VLAN filter and strip Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 09/26] net/bnxt: add support for set multicast addr list and MAC addr set Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 10/26] doc: update bnxt.ini to document Allmulticast mode Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 11/26] net/bnxt: add support to get fw version Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 12/26] net/bnxt: add support to set MTU Ajit Khaparde
2017-06-06 12:47 ` Ferruh Yigit
2017-06-06 14:00 ` Ajit Khaparde
2017-06-06 14:25 ` Ferruh Yigit
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 13/26] net/bnxt: add support for LRO Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 14/26] net/bnxt: add rxq/txq info_get Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 15/26] net/bnxt: add code to support VLAN pvid Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 16/26] net/bnxt: reorg the query stats code Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 17/26] doc: update default.ini to add LED support Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 18/26] net/bnxt: add support for led on/off Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 19/26] net/bnxt: add support for tx loopback, set vf mac and queues drop Ajit Khaparde
2017-06-06 12:53 ` Ferruh Yigit
2017-06-06 14:09 ` Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 20/26] net/bnxt: add support for set VF QOS and MAC anti spoof Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 21/26] net/bnxt: add support to get and clear VF specific stats Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 22/26] net/bnxt: add code to determine the Rx status of VF Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 23/26] net/bnxt: add support to add a VF MAC address Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 24/26] net/bnxt: add code to configure a default VF VLAN Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 25/26] net/bnxt: add support to set VF rxmode Ajit Khaparde
2017-06-01 17:07 ` [dpdk-dev] [PATCH v4 26/26] doc: update release notes Ajit Khaparde
2017-06-06 14:48 ` [dpdk-dev] [PATCH v4 00/26] bnxt patchset Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170601030232.38677-19-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).