From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: "Gaëtan Rivet" <gaetan.rivet@6wind.com>
Cc: dev@dpdk.org, bruce.richardson@intel.com,
harry.van.haaren@intel.com, hemant.agrawal@nxp.com,
gage.eads@intel.com, nipun.gupta@nxp.com
Subject: Re: [dpdk-dev] [PATCH] eventdev: remove PCI dependency
Date: Tue, 6 Jun 2017 08:35:48 +0530 [thread overview]
Message-ID: <20170606030547.GA20006@jerin> (raw)
In-Reply-To: <20170605125555.GJ18840@bidouze.vm.6wind.com>
-----Original Message-----
> Date: Mon, 5 Jun 2017 14:55:55 +0200
> From: Gaëtan Rivet <gaetan.rivet@6wind.com>
> To: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> Cc: dev@dpdk.org, bruce.richardson@intel.com, harry.van.haaren@intel.com,
> hemant.agrawal@nxp.com, gage.eads@intel.com, nipun.gupta@nxp.com
> Subject: Re: [dpdk-dev] [PATCH] eventdev: remove PCI dependency
> User-Agent: Mutt/1.5.23 (2014-03-12)
>
> Hi Jerin,
Hi Gaëtan,
>
> On Thu, Jun 01, 2017 at 10:11:46PM +0530, Jerin Jacob wrote:
> > Remove the PCI dependency from generic data structures
> > and moved the PCI specific code to rte_event_pmd_pci*
> >
>
> Thanks for working on this.
>
> Do you plan on removing rte_pci.h in rte_eventdev_pmd.h? Do you think it
> would be feasible?
That is for PCI PMD specific probe(rte_event_pmd_pci_probe() and rte_event_pmd_pci_remove()),
More like, lib/librte_ether/rte_ethdev_pci.h functions in ethdev.
So, I think, It is OK to keep rte_pci.h for PMD specific functions.
>
> > CC: Gaetan Rivet <gaetan.rivet@6wind.com>
> > Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > ---
> > drivers/event/skeleton/skeleton_eventdev.c | 30 +++++++++-----
> > lib/librte_eventdev/rte_eventdev.c | 37 +++++++-----------
> > lib/librte_eventdev/rte_eventdev.h | 2 -
> > lib/librte_eventdev/rte_eventdev_pmd.h | 63 ++++--------------------------
> > 4 files changed, 41 insertions(+), 91 deletions(-)
> >
> > diff --git a/drivers/event/skeleton/skeleton_eventdev.c b/drivers/event/skeleton/skeleton_eventdev.c
> > index 800bd76e0..34684aba0 100644
> > --- a/drivers/event/skeleton/skeleton_eventdev.c
> > +++ b/drivers/event/skeleton/skeleton_eventdev.c
> > @@ -427,18 +427,28 @@ static const struct rte_pci_id pci_id_skeleton_map[] = {
> > },
> > };
> >
> > -static struct rte_eventdev_driver pci_eventdev_skeleton_pmd = {
> > - .pci_drv = {
> > - .id_table = pci_id_skeleton_map,
> > - .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
> > - .probe = rte_event_pmd_pci_probe,
> > - .remove = rte_event_pmd_pci_remove,
> > - },
> > - .eventdev_init = skeleton_eventdev_init,
> > - .dev_private_size = sizeof(struct skeleton_eventdev),
> > +static int
> > +event_skeleton_pci_probe(struct rte_pci_driver *pci_drv,
> > + struct rte_pci_device *pci_dev)
> > +{
> > + return rte_event_pmd_pci_probe(pci_drv, pci_dev,
> > + sizeof(struct skeleton_eventdev), skeleton_eventdev_init);
> > +}
> > +
> > +static int
> > +event_skeleton_pci_remove(struct rte_pci_device *pci_dev)
> > +{
> > + return rte_event_pmd_pci_remove(pci_dev, NULL);
> > +}
> > +
> > +static struct rte_pci_driver pci_eventdev_skeleton_pmd = {
> > + .id_table = pci_id_skeleton_map,
> > + .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
> > + .probe = event_skeleton_pci_probe,
> > + .remove = event_skeleton_pci_remove,
> > };
> >
> > -RTE_PMD_REGISTER_PCI(event_skeleton_pci, pci_eventdev_skeleton_pmd.pci_drv);
> > +RTE_PMD_REGISTER_PCI(event_skeleton_pci, pci_eventdev_skeleton_pmd);
> > RTE_PMD_REGISTER_PCI_TABLE(event_skeleton_pci, pci_id_skeleton_map);
> >
> > /* VDEV based event device */
> > diff --git a/lib/librte_eventdev/rte_eventdev.c b/lib/librte_eventdev/rte_eventdev.c
> > index 20afc3f0e..91f950666 100644
> > --- a/lib/librte_eventdev/rte_eventdev.c
> > +++ b/lib/librte_eventdev/rte_eventdev.c
> > @@ -126,8 +126,6 @@ rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info)
> > dev_info->dequeue_timeout_ns = dev->data->dev_conf.dequeue_timeout_ns;
> >
> > dev_info->dev = dev->dev;
> > - if (dev->driver)
> > - dev_info->driver_name = dev->driver->pci_drv.driver.name;
> > return 0;
> > }
> >
> > @@ -1250,18 +1248,18 @@ rte_event_pmd_vdev_uninit(const char *name)
> >
> > int
> > rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
> > - struct rte_pci_device *pci_dev)
> > + struct rte_pci_device *pci_dev,
> > + size_t private_data_size,
> > + eventdev_pmd_pci_callback_t devinit)
> > {
> > - struct rte_eventdev_driver *eventdrv;
> > struct rte_eventdev *eventdev;
> >
> > char eventdev_name[RTE_EVENTDEV_NAME_MAX_LEN];
> >
> > int retval;
> >
> > - eventdrv = (struct rte_eventdev_driver *)pci_drv;
> > - if (eventdrv == NULL)
> > - return -ENODEV;
> > + if (devinit == NULL)
> > + return -EINVAL;
> >
> > rte_pci_device_name(&pci_dev->addr, eventdev_name,
> > sizeof(eventdev_name));
> > @@ -1275,7 +1273,7 @@ rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
> > eventdev->data->dev_private =
> > rte_zmalloc_socket(
> > "eventdev private structure",
> > - eventdrv->dev_private_size,
> > + private_data_size,
> > RTE_CACHE_LINE_SIZE,
> > rte_socket_id());
> >
> > @@ -1285,10 +1283,9 @@ rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
> > }
> >
> > eventdev->dev = &pci_dev->device;
> > - eventdev->driver = eventdrv;
> >
> > /* Invoke PMD device initialization function */
> > - retval = (*eventdrv->eventdev_init)(eventdev);
> > + retval = devinit(eventdev);
> > if (retval == 0)
> > return 0;
> >
> > @@ -1307,12 +1304,12 @@ rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
> > }
> >
> > int
> > -rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev)
> > +rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev,
> > + eventdev_pmd_pci_callback_t devuninit)
> > {
> > - const struct rte_eventdev_driver *eventdrv;
> > struct rte_eventdev *eventdev;
> > char eventdev_name[RTE_EVENTDEV_NAME_MAX_LEN];
> > - int ret;
> > + int ret = 0;
> >
> > if (pci_dev == NULL)
> > return -EINVAL;
> > @@ -1324,22 +1321,16 @@ rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev)
> > if (eventdev == NULL)
> > return -ENODEV;
> >
> > - eventdrv = (const struct rte_eventdev_driver *)pci_dev->driver;
> > - if (eventdrv == NULL)
> > - return -ENODEV;
> > -
> > /* Invoke PMD device un-init function */
> > - if (*eventdrv->eventdev_uninit) {
> > - ret = (*eventdrv->eventdev_uninit)(eventdev);
> > - if (ret)
> > - return ret;
> > - }
> > + if (devuninit)
> > + ret = devuninit(eventdev);
> > + if (ret)
> > + return ret;
> >
> > /* Free event device */
> > rte_event_pmd_release(eventdev);
> >
> > eventdev->dev = NULL;
> > - eventdev->driver = NULL;
> >
> > return 0;
> > }
> > diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
> > index 20e7293e0..c5b2b7453 100644
> > --- a/lib/librte_eventdev/rte_eventdev.h
> > +++ b/lib/librte_eventdev/rte_eventdev.h
> > @@ -1063,8 +1063,6 @@ struct rte_eventdev {
> > /**< Functions exported by PMD */
> > struct rte_device *dev;
> > /**< Device info. supplied by probing */
> > - const struct rte_eventdev_driver *driver;
> > - /**< Driver for this device */
> >
> > RTE_STD_C11
> > uint8_t attached : 1;
> > diff --git a/lib/librte_eventdev/rte_eventdev_pmd.h b/lib/librte_eventdev/rte_eventdev_pmd.h
> > index 4005b3c98..faa6989b4 100644
> > --- a/lib/librte_eventdev/rte_eventdev_pmd.h
> > +++ b/lib/librte_eventdev/rte_eventdev_pmd.h
> > @@ -87,60 +87,6 @@ extern "C" {
> > #define RTE_EVENTDEV_DETACHED (0)
> > #define RTE_EVENTDEV_ATTACHED (1)
> >
> > -/**
> > - * Initialisation function of a event driver invoked for each matching
> > - * event PCI device detected during the PCI probing phase.
> > - *
> > - * @param dev
> > - * The dev pointer is the address of the *rte_eventdev* structure associated
> > - * with the matching device and which has been [automatically] allocated in
> > - * the *rte_event_devices* array.
> > - *
> > - * @return
> > - * - 0: Success, the device is properly initialised by the driver.
> > - * In particular, the driver MUST have set up the *dev_ops* pointer
> > - * of the *dev* structure.
> > - * - <0: Error code of the device initialisation failure.
> > - */
> > -typedef int (*eventdev_init_t)(struct rte_eventdev *dev);
> > -
> > -/**
> > - * Finalisation function of a driver invoked for each matching
> > - * PCI device detected during the PCI closing phase.
> > - *
> > - * @param dev
> > - * The dev pointer is the address of the *rte_eventdev* structure associated
> > - * with the matching device and which has been [automatically] allocated in
> > - * the *rte_event_devices* array.
> > - *
> > - * @return
> > - * - 0: Success, the device is properly finalised by the driver.
> > - * In particular, the driver MUST free the *dev_ops* pointer
> > - * of the *dev* structure.
> > - * - <0: Error code of the device initialisation failure.
> > - */
> > -typedef int (*eventdev_uninit_t)(struct rte_eventdev *dev);
> > -
> > -/**
> > - * The structure associated with a PMD driver.
> > - *
> > - * Each driver acts as a PCI driver and is represented by a generic
> > - * *event_driver* structure that holds:
> > - *
> > - * - An *rte_pci_driver* structure (which must be the first field).
> > - *
> > - * - The *eventdev_init* function invoked for each matching PCI device.
> > - *
> > - * - The size of the private data to allocate for each matching device.
> > - */
> > -struct rte_eventdev_driver {
> > - struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
> > - unsigned int dev_private_size; /**< Size of device private data. */
> > -
> > - eventdev_init_t eventdev_init; /**< Device init function. */
> > - eventdev_uninit_t eventdev_uninit; /**< Device uninit function. */
> > -};
> > -
> > /** Global structure used for maintaining state of allocated event devices */
> > struct rte_eventdev_global {
> > uint8_t nb_devs; /**< Number of devices found */
> > @@ -579,18 +525,23 @@ rte_event_pmd_vdev_init(const char *name, size_t dev_private_size,
> > int
> > rte_event_pmd_vdev_uninit(const char *name);
> >
> > +typedef int (*eventdev_pmd_pci_callback_t)(struct rte_eventdev *dev);
> > +
> > /**
> > * Wrapper for use by pci drivers as a .probe function to attach to a event
> > * interface.
> > */
> > int rte_event_pmd_pci_probe(struct rte_pci_driver *pci_drv,
> > - struct rte_pci_device *pci_dev);
> > + struct rte_pci_device *pci_dev,
> > + size_t private_data_size,
> > + eventdev_pmd_pci_callback_t devinit);
> >
> > /**
> > * Wrapper for use by pci drivers as a .remove function to detach a event
> > * interface.
> > */
> > -int rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev);
> > +int rte_event_pmd_pci_remove(struct rte_pci_device *pci_dev,
> > + eventdev_pmd_pci_callback_t devuninit);
> >
> > #ifdef __cplusplus
> > }
> > --
> > 2.13.0
> >
>
> --
> Gaëtan Rivet
> 6WIND
next prev parent reply other threads:[~2017-06-06 3:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 16:41 Jerin Jacob
2017-06-05 12:55 ` Gaëtan Rivet
2017-06-06 3:05 ` Jerin Jacob [this message]
2017-06-06 8:09 ` Gaëtan Rivet
2017-06-06 9:01 ` Jerin Jacob
2017-06-06 14:10 ` [dpdk-dev] [PATCH v2] " Jerin Jacob
2017-06-06 14:51 ` Gaëtan Rivet
2017-06-07 8:43 ` [dpdk-dev] [PATCH v2 0/4] Remove PCI and VDEV dependency from eventdev library Jerin Jacob
2017-06-07 8:43 ` [dpdk-dev] [PATCH v2 1/4] eventdev: remove PCI dependency from generic data structures Jerin Jacob
2017-06-09 8:37 ` [dpdk-dev] [PATCH v4 0/4] Remove PCI and VDEV dependency from eventdev library Jerin Jacob
2017-06-09 8:37 ` [dpdk-dev] [PATCH v4 1/4] eventdev: remove PCI dependency from generic data structures Jerin Jacob
2017-06-09 8:37 ` [dpdk-dev] [PATCH v4 2/4] eventdev: restructure event PMD release function Jerin Jacob
2017-06-09 8:37 ` [dpdk-dev] [PATCH v4 3/4] eventdev: make PCI probe and remove functions optional Jerin Jacob
2017-06-09 8:37 ` [dpdk-dev] [PATCH v4 4/4] eventdev: make vdev init and uninit " Jerin Jacob
2017-06-20 14:14 ` [dpdk-dev] [PATCH v4 0/4] Remove PCI and VDEV dependency from eventdev library Jerin Jacob
2017-06-07 8:43 ` [dpdk-dev] [PATCH v2 2/4] eventdev: restructure event PMD release function Jerin Jacob
2017-06-07 8:43 ` [dpdk-dev] [PATCH v2 3/4] eventdev: make PCI probe and remove functions optional Jerin Jacob
2017-06-07 8:43 ` [dpdk-dev] [PATCH v2 4/4] eventdev: make vdev init and uninit " Jerin Jacob
2017-06-07 9:27 ` [dpdk-dev] [PATCH v2 0/4] Remove PCI and VDEV dependency from eventdev library Gaëtan Rivet
2017-06-08 17:05 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170606030547.GA20006@jerin \
--to=jerin.jacob@caviumnetworks.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=gage.eads@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=nipun.gupta@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).