From: Wei Dai <wei.dai@intel.com>
To: thomas@monjalon.net, wenzhuo.lu@intel.com,
konstantin.ananyev@intel.com, helin.zhang@intel.com,
jingjing.wu@intel.com, yuan.peng@intel.com
Cc: dev@dpdk.org, Wei Dai <wei.dai@intel.com>
Subject: [dpdk-dev] [PATCH v3 1/4] ethdev: add support of NIC reset
Date: Thu, 29 Jun 2017 16:34:01 +0800 [thread overview]
Message-ID: <20170629083404.1271-2-wei.dai@intel.com> (raw)
In-Reply-To: <20170629083404.1271-1-wei.dai@intel.com>
A DPDK application can reset a NIC and keep its port id afterwards.
It means that all SW resources allocated in ethdev layer should be
kept and SW and HW resources of the NIC in PMD need to be reset
in similar way that it runs PCI dev_uninit() and then dev_init().
The sequence of dev_uninit() and dev_init() can be packed into a
single interface API rte_eth_dev_reset().
Signed-off-by: Wei Dai <wei.dai@intel.com>
---
lib/librte_ether/rte_ethdev.c | 16 ++++++++++++++++
lib/librte_ether/rte_ethdev.h | 12 ++++++++++++
lib/librte_ether/rte_ether_version.map | 2 +-
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 81a45c0..06b8839 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3349,3 +3349,19 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
-ENOTSUP);
return (*dev->dev_ops->l2_tunnel_offload_set)(dev, l2_tunnel, mask, en);
}
+
+int
+rte_eth_dev_reset(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+ dev = &rte_eth_devices[port_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_reset, -ENOTSUP);
+
+ rte_eth_dev_stop(port_id);
+ ret = dev->dev_ops->dev_reset(dev);
+ return ret;
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index f6e6c74..4922b36 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1087,6 +1087,9 @@ typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
/**< @internal Function used to close a configured Ethernet device. */
+typedef int (*eth_dev_reset_t)(struct rte_eth_dev *dev);
+/** <@internal Function used to reset a configured Ethernet device. */
+
typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
@@ -1404,6 +1407,7 @@ struct eth_dev_ops {
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
eth_dev_close_t dev_close; /**< Close device. */
+ eth_dev_reset_t dev_reset; /**< Reset device. */
eth_link_update_t link_update; /**< Get device link state. */
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
@@ -2104,6 +2108,14 @@ int rte_eth_dev_set_link_down(uint8_t port_id);
void rte_eth_dev_close(uint8_t port_id);
/**
+ * Reset a Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+int rte_eth_dev_reset(uint8_t port_id);
+
+/**
* Enable receipt in promiscuous mode for an Ethernet device.
*
* @param port_id
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index e0881f0..d569bcb 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -153,5 +153,5 @@ DPDK_17.08 {
global:
rte_flow_isolate;
-
+ rte_eth_dev_reset;
} DPDK_17.05;
--
2.9.3
next prev parent reply other threads:[~2017-06-29 8:37 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-27 8:22 [dpdk-dev] [PATCH 0/7] NIC port restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 1/7] ethdev: add support of NIC restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 2/7] ethdev: add support of restoration of queue state Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 3/7] ethdev: add support of restoration of port status Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 4/7] ethdev: add support of MTU restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 5/7] ethdev: add support of restoration of multicast addr Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 6/7] net/ixgbe: add support of restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 7/7] net/i40e: " Wei Dai
2017-06-07 7:50 ` Wu, Jingjing
2017-06-20 7:55 ` Dai, Wei
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 0/5] Support NIC reset and keep same port id Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 1/5] ethdev: add support of NIC reset Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 2/5] net/ixgbe: add support of reset Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 3/5] net/i40e: " Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 4/5] app/testpmd: add command to test NIC reset Wei Dai
2017-06-28 9:10 ` Wu, Jingjing
2017-06-29 7:00 ` Dai, Wei
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 5/5] app/testpmd: add command to test NIC restoration Wei Dai
2017-06-28 9:05 ` Wu, Jingjing
2017-06-29 6:58 ` Dai, Wei
2017-06-29 3:51 ` [dpdk-dev] [PATCH v2 0/5] Support NIC reset and keep same port id Peng, Yuan
2017-06-29 6:29 ` Dai, Wei
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 0/4] " Wei Dai
2017-06-29 8:34 ` Wei Dai [this message]
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 2/4] net/ixgbe: add support of reset Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 3/4] net/i40e: " Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 0/5] Support NIC reset and keep same port id Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 1/5] ethdev: add support of NIC reset Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 2/5] net/ixgbe: add support of reset Wei Dai
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 3/5] net/i40e: " Wei Dai
2017-06-30 8:54 ` Wu, Jingjing
2017-06-30 9:37 ` Dai, Wei
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 4/5] app/testpmd: display PCI address in port info Wei Dai
2017-06-30 9:07 ` Wu, Jingjing
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 5/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-30 5:13 ` Peng, Yuan
2017-06-30 8:57 ` Wu, Jingjing
2017-06-30 9:09 ` Wu, Jingjing
2017-06-30 9:15 ` Dai, Wei
2017-06-30 5:11 ` [dpdk-dev] [PATCH v4 0/5] Support NIC reset and keep same port id Peng, Yuan
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 0/4] " Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 1/4] ethdev: add support of NIC reset Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 2/4] net/ixgbe: add support of reset Wei Dai
2017-07-07 8:25 ` Thomas Monjalon
2017-07-07 8:36 ` Thomas Monjalon
2017-07-10 10:19 ` Dai, Wei
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 3/4] net/i40e: " Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-30 10:50 ` [dpdk-dev] [PATCH v5 0/4] Support NIC reset and keep same port id Wu, Jingjing
2017-07-05 5:48 ` Dai, Wei
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 " Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 1/4] ethdev: add support of NIC reset Wei Dai
2017-07-10 11:35 ` Jerin Jacob
2017-07-11 1:57 ` Dai, Wei
2017-07-11 5:17 ` Jerin Jacob
2017-07-11 14:36 ` Dai, Wei
2017-07-12 16:13 ` Jerin Jacob
2017-07-13 16:06 ` Dai, Wei
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 2/4] net/ixgbe: add support of reset Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 3/4] net/i40e: " Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 0/5] Support NIC reset and keep same port id Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 1/5] ethdev: add support of NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 2/5] net/ixgbe: add support of reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 3/5] net/i40e: " Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 5/5] doc: add description of the NIC reset API Wei Dai
2017-07-16 19:25 ` [dpdk-dev] [PATCH v7 0/5] Support NIC reset and keep same port id Thomas Monjalon
2017-07-17 14:02 ` Dai, Wei
2017-07-19 14:36 ` Dai, Wei
2017-07-17 15:14 ` [dpdk-dev] [PATCH v8 0/5] Support of " Wei Dai
2017-07-17 15:14 ` [dpdk-dev] [PATCH v8 1/5] ethdev: add support of NIC reset Wei Dai
2017-07-20 13:21 ` Remy Horton
2017-07-23 13:45 ` Dai, Wei
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 2/5] net/ixgbe: add support of reset Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 3/5] net/i40e: " Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 5/5] doc: add description of the NIC reset API Wei Dai
2017-07-20 13:22 ` Remy Horton
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 0/5] Support of NIC reset and keep same port id Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 1/5] ethdev: add support of NIC reset Wei Dai
2017-09-13 20:51 ` Thomas Monjalon
2017-09-14 18:16 ` Luca Boccassi
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 2/5] net/ixgbe: add support of reset Wei Dai
2017-09-13 20:53 ` Thomas Monjalon
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 3/5] net/i40e: " Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 5/5] doc: add description of the NIC reset API Wei Dai
2017-09-13 21:02 ` [dpdk-dev] [PATCH v9 0/5] Support of NIC reset and keep same port id Thomas Monjalon
2017-09-14 1:32 ` Dai, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170629083404.1271-2-wei.dai@intel.com \
--to=wei.dai@intel.com \
--cc=dev@dpdk.org \
--cc=helin.zhang@intel.com \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=thomas@monjalon.net \
--cc=wenzhuo.lu@intel.com \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).