DPDK patches and discussions
 help / color / mirror / Atom feed
From: Santosh Shukla <santosh.shukla@caviumnetworks.com>
To: dev@dpdk.org
Cc: olivier.matz@6wind.com, thomas@monjalon.net,
	jerin.jacob@caviumnetworks.com, hemant.agrawal@nxp.com,
	Santosh Shukla <santosh.shukla@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v1 2/4] eal/memory: rename buf_physaddr to buf_iovaaddr
Date: Mon, 14 Aug 2017 20:45:35 +0530	[thread overview]
Message-ID: <20170814151537.29454-3-santosh.shukla@caviumnetworks.com> (raw)
In-Reply-To: <20170814151537.29454-1-santosh.shukla@caviumnetworks.com>

Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
---
v1 notes:
 Since crux of change is at eal/memory area so using that as
 title.

 doc/guides/prog_guide/img/mbuf1.svg                        |  2 +-
 drivers/bus/fslmc/portal/dpaa2_hw_pvt.h                    |  2 +-
 drivers/net/ark/ark_ethdev_rx.c                            |  8 ++++----
 drivers/net/bnx2x/bnx2x_rxtx.c                             |  4 ++--
 drivers/net/bnxt/bnxt_ring.h                               |  2 +-
 drivers/net/cxgbe/sge.c                                    |  4 ++--
 drivers/net/ena/ena_ethdev.c                               |  6 +++---
 drivers/net/enic/enic_main.c                               |  2 +-
 drivers/net/enic/enic_rxtx.c                               |  6 +++---
 drivers/net/fm10k/fm10k.h                                  |  4 ++--
 drivers/net/fm10k/fm10k_rxtx_vec.c                         |  4 ++--
 drivers/net/i40e/i40e_rxtx_vec_altivec.c                   |  4 ++--
 drivers/net/i40e/i40e_rxtx_vec_neon.c                      |  6 +++---
 drivers/net/i40e/i40e_rxtx_vec_sse.c                       |  6 +++---
 drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c                    |  6 +++---
 drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c                     |  6 +++---
 drivers/net/nfp/nfp_net.c                                  |  2 +-
 drivers/net/virtio/virtio_ethdev.c                         |  2 +-
 drivers/net/virtio/virtqueue.h                             |  2 +-
 lib/librte_eal/common/eal_common_memory.c                  |  2 +-
 lib/librte_eal/common/include/rte_memory.h                 |  2 +-
 lib/librte_eal/common/rte_malloc.c                         |  4 ++--
 lib/librte_eal/linuxapp/eal/eal_memory.c                   |  8 ++++----
 lib/librte_eal/linuxapp/eal/eal_vfio.c                     |  4 ++--
 .../linuxapp/eal/include/exec-env/rte_kni_common.h         |  2 +-
 lib/librte_eal/linuxapp/kni/kni_net.c                      |  6 +++---
 lib/librte_kni/rte_kni.c                                   |  2 +-
 lib/librte_mbuf/rte_mbuf.c                                 |  6 +++---
 lib/librte_mbuf/rte_mbuf.h                                 | 14 +++++++-------
 lib/librte_vhost/virtio_net.c                              |  2 +-
 test/test/test_mbuf.c                                      |  2 +-
 31 files changed, 66 insertions(+), 66 deletions(-)

diff --git a/doc/guides/prog_guide/img/mbuf1.svg b/doc/guides/prog_guide/img/mbuf1.svg
index 5bd84d1bf..2f856bfd9 100644
--- a/doc/guides/prog_guide/img/mbuf1.svg
+++ b/doc/guides/prog_guide/img/mbuf1.svg
@@ -482,7 +482,7 @@
          sodipodi:role="line"
          x="187.85715"
          y="347.7193"
-         id="tspan5240">(m-&gt;buf_physaddr is the</tspan><tspan
+         id="tspan5240">(m-&gt;buf_iovaaddr is the</tspan><tspan
          sodipodi:role="line"
          x="187.85715"
          y="360.2193"
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index 184c7069d..15e3878eb 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -309,7 +309,7 @@ static iova_addr_t dpaa2_mem_vtop(uint64_t vaddr)
  * These routines are called with help of below MACRO's
  */
 
-#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_physaddr)
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_iovaaddr)
 #define DPAA2_OP_VADDR_TO_IOVA(op) (op->phys_addr)
 
 /**
diff --git a/drivers/net/ark/ark_ethdev_rx.c b/drivers/net/ark/ark_ethdev_rx.c
index 1cbda01a7..90cf304c0 100644
--- a/drivers/net/ark/ark_ethdev_rx.c
+++ b/drivers/net/ark/ark_ethdev_rx.c
@@ -500,22 +500,22 @@ eth_ark_rx_seed_mbufs(struct ark_rx_queue *queue)
 	case 0:
 		while (count != nb) {
 			queue->paddress_q[seed_m++] =
-				(*mbufs++)->buf_physaddr;
+				(*mbufs++)->buf_iovaaddr;
 			count++;
 		/* FALLTHROUGH */
 	case 3:
 		queue->paddress_q[seed_m++] =
-			(*mbufs++)->buf_physaddr;
+			(*mbufs++)->buf_iovaaddr;
 		count++;
 		/* FALLTHROUGH */
 	case 2:
 		queue->paddress_q[seed_m++] =
-			(*mbufs++)->buf_physaddr;
+			(*mbufs++)->buf_iovaaddr;
 		count++;
 		/* FALLTHROUGH */
 	case 1:
 		queue->paddress_q[seed_m++] =
-			(*mbufs++)->buf_physaddr;
+			(*mbufs++)->buf_iovaaddr;
 		count++;
 		/* FALLTHROUGH */
 
diff --git a/drivers/net/bnx2x/bnx2x_rxtx.c b/drivers/net/bnx2x/bnx2x_rxtx.c
index 7336124fc..e558bb12c 100644
--- a/drivers/net/bnx2x/bnx2x_rxtx.c
+++ b/drivers/net/bnx2x/bnx2x_rxtx.c
@@ -140,7 +140,7 @@ bnx2x_dev_rx_queue_setup(struct rte_eth_dev *dev,
 			return -ENOMEM;
 		}
 		rxq->sw_ring[idx] = mbuf;
-		rxq->rx_ring[idx] = mbuf->buf_physaddr;
+		rxq->rx_ring[idx] = mbuf->buf_iovaaddr;
 	}
 	rxq->pkt_first_seg = NULL;
 	rxq->pkt_last_seg = NULL;
@@ -400,7 +400,7 @@ bnx2x_recv_pkts(void *p_rxq, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
 
 		rx_mb = rxq->sw_ring[bd_cons];
 		rxq->sw_ring[bd_cons] = new_mb;
-		rxq->rx_ring[bd_prod] = new_mb->buf_physaddr;
+		rxq->rx_ring[bd_prod] = new_mb->buf_iovaaddr;
 
 		rx_pref = NEXT_RX_BD(bd_cons) & MAX_RX_BD(rxq);
 		rte_prefetch0(rxq->sw_ring[rx_pref]);
diff --git a/drivers/net/bnxt/bnxt_ring.h b/drivers/net/bnxt/bnxt_ring.h
index 09042cb80..79504af24 100644
--- a/drivers/net/bnxt/bnxt_ring.h
+++ b/drivers/net/bnxt/bnxt_ring.h
@@ -41,7 +41,7 @@
 #define RING_NEXT(ring, idx)		(((idx) + 1) & (ring)->ring_mask)
 
 #define RTE_MBUF_DATA_DMA_ADDR(mb) \
-	((uint64_t)((mb)->buf_physaddr + (mb)->data_off))
+	((uint64_t)((mb)->buf_iovaaddr + (mb)->data_off))
 
 #define DB_IDX_MASK						0xffffff
 #define DB_IDX_VALID						(0x1 << 26)
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index 5376fc500..d867914ab 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -149,7 +149,7 @@ static int map_mbuf(struct rte_mbuf *mbuf, dma_addr_t *addr)
 	struct rte_mbuf *m = mbuf;
 
 	for (; m; m = m->next, addr++) {
-		*addr = m->buf_physaddr + rte_pktmbuf_headroom(m);
+		*addr = m->buf_iovaaddr + rte_pktmbuf_headroom(m);
 		if (*addr == 0)
 			goto out_err;
 	}
@@ -423,7 +423,7 @@ static unsigned int refill_fl_usembufs(struct adapter *adap, struct sge_fl *q,
 		mbuf->nb_segs = 1;
 		mbuf->port = rxq->rspq.port_id;
 
-		mapping = (dma_addr_t)RTE_ALIGN(mbuf->buf_physaddr +
+		mapping = (dma_addr_t)RTE_ALIGN(mbuf->buf_iovaaddr +
 						mbuf->data_off,
 						adap->sge.fl_align);
 		mapping |= buf_size_idx;
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 80ce1f353..12450f300 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -1166,7 +1166,7 @@ static int ena_populate_rx_queue(struct ena_ring *rxq, unsigned int count)
 
 		rte_prefetch0(mbufs[((next_to_use + 4) & ring_mask)]);
 		/* prepare physical address for DMA transaction */
-		ebuf.paddr = mbuf->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+		ebuf.paddr = mbuf->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 		ebuf.len = mbuf->buf_len - RTE_PKTMBUF_HEADROOM;
 		/* pass resource to device */
 		rc = ena_com_add_single_rx_desc(rxq->ena_com_io_sq,
@@ -1725,7 +1725,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		 * consideration pushed header
 		 */
 		if (mbuf->data_len > ena_tx_ctx.header_len) {
-			ebuf->paddr = mbuf->buf_physaddr +
+			ebuf->paddr = mbuf->buf_iovaaddr +
 				      mbuf->data_off +
 				      ena_tx_ctx.header_len;
 			ebuf->len = mbuf->data_len - ena_tx_ctx.header_len;
@@ -1734,7 +1734,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		}
 
 		while ((mbuf = mbuf->next) != NULL) {
-			ebuf->paddr = mbuf->buf_physaddr + mbuf->data_off;
+			ebuf->paddr = mbuf->buf_iovaaddr + mbuf->data_off;
 			ebuf->len = mbuf->data_len;
 			ebuf++;
 			tx_info->num_of_bufs++;
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 40dbec7fa..7801a8b31 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -313,7 +313,7 @@ enic_alloc_rx_queue_mbufs(struct enic *enic, struct vnic_rq *rq)
 		}
 
 		mb->data_off = RTE_PKTMBUF_HEADROOM;
-		dma_addr = (dma_addr_t)(mb->buf_physaddr
+		dma_addr = (dma_addr_t)(mb->buf_iovaaddr
 			   + RTE_PKTMBUF_HEADROOM);
 		rq_enet_desc_enc(rqd, dma_addr,
 				(rq->is_sop ? RQ_ENET_TYPE_ONLY_SOP
diff --git a/drivers/net/enic/enic_rxtx.c b/drivers/net/enic/enic_rxtx.c
index a39172f14..95b1db1f9 100644
--- a/drivers/net/enic/enic_rxtx.c
+++ b/drivers/net/enic/enic_rxtx.c
@@ -386,7 +386,7 @@ enic_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 
 		/* Push descriptor for newly allocated mbuf */
 		nmb->data_off = RTE_PKTMBUF_HEADROOM;
-		dma_addr = (dma_addr_t)(nmb->buf_physaddr +
+		dma_addr = (dma_addr_t)(nmb->buf_iovaaddr +
 					RTE_PKTMBUF_HEADROOM);
 		rq_enet_desc_enc(rqd_ptr, dma_addr,
 				(rq->is_sop ? RQ_ENET_TYPE_ONLY_SOP
@@ -578,7 +578,7 @@ uint16_t enic_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		vlan_id = 0;
 		vlan_tag_insert = 0;
 		bus_addr = (dma_addr_t)
-			   (tx_pkt->buf_physaddr + tx_pkt->data_off);
+			   (tx_pkt->buf_iovaaddr + tx_pkt->data_off);
 
 		descs = (struct wq_enet_desc *)wq->ring.descs;
 		desc_p = descs + head_idx;
@@ -630,7 +630,7 @@ uint16_t enic_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 				if (tx_pkt->next == NULL)
 					eop = 1;
 				desc_p = descs + head_idx;
-				bus_addr = (dma_addr_t)(tx_pkt->buf_physaddr
+				bus_addr = (dma_addr_t)(tx_pkt->buf_iovaaddr
 					   + tx_pkt->data_off);
 				wq_enet_desc_enc((struct wq_enet_desc *)
 						 &desc_tmp, bus_addr, data_len,
diff --git a/drivers/net/fm10k/fm10k.h b/drivers/net/fm10k/fm10k.h
index 8e1a95062..d3859fd61 100644
--- a/drivers/net/fm10k/fm10k.h
+++ b/drivers/net/fm10k/fm10k.h
@@ -252,11 +252,11 @@ struct fm10k_txq_ops {
 };
 
 #define MBUF_DMA_ADDR(mb) \
-	((uint64_t) ((mb)->buf_physaddr + (mb)->data_off))
+	((uint64_t) ((mb)->buf_iovaaddr + (mb)->data_off))
 
 /* enforce 512B alignment on default Rx DMA addresses */
 #define MBUF_DMA_ADDR_DEFAULT(mb) \
-	((uint64_t) RTE_ALIGN(((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM),\
+	((uint64_t) RTE_ALIGN(((mb)->buf_iovaaddr + RTE_PKTMBUF_HEADROOM),\
 			FM10K_RX_DATABUF_ALIGN))
 
 static inline void fifo_reset(struct fifo *fifo, uint32_t len)
diff --git a/drivers/net/fm10k/fm10k_rxtx_vec.c b/drivers/net/fm10k/fm10k_rxtx_vec.c
index d23bfe9b7..5d40479da 100644
--- a/drivers/net/fm10k/fm10k_rxtx_vec.c
+++ b/drivers/net/fm10k/fm10k_rxtx_vec.c
@@ -330,8 +330,8 @@ fm10k_rxq_rearm(struct fm10k_rx_queue *rxq)
 		p1 = (uintptr_t)&mb1->rearm_data;
 		*(uint64_t *)p1 = rxq->mbuf_initializer;
 
-		/* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
-		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_physaddr) !=
+		/* load buf_addr(lo 64bit) and buf_iovaaddr(hi 64bit) */
+		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_iovaaddr) !=
 				offsetof(struct rte_mbuf, buf_addr) + 8);
 		vaddr0 = _mm_loadu_si128((__m128i *)&mb0->buf_addr);
 		vaddr1 = _mm_loadu_si128((__m128i *)&mb1->buf_addr);
diff --git a/drivers/net/i40e/i40e_rxtx_vec_altivec.c b/drivers/net/i40e/i40e_rxtx_vec_altivec.c
index f4036ea28..242a479f0 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_altivec.c
+++ b/drivers/net/i40e/i40e_rxtx_vec_altivec.c
@@ -100,7 +100,7 @@ i40e_rxq_rearm(struct i40e_rx_queue *rxq)
 		p1 = (uintptr_t)&mb1->rearm_data;
 		*(uint64_t *)p1 = rxq->mbuf_initializer;
 
-		/* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
+		/* load buf_addr(lo 64bit) and buf_iovaaddr(hi 64bit) */
 		vaddr0 = vec_ld(0, (vector unsigned long *)&mb0->buf_addr);
 		vaddr1 = vec_ld(0, (vector unsigned long *)&mb1->buf_addr);
 
@@ -538,7 +538,7 @@ vtx1(volatile struct i40e_tx_desc *txdp,
 		((uint64_t)pkt->data_len << I40E_TXD_QW1_TX_BUF_SZ_SHIFT));
 
 	vector unsigned long descriptor = (vector unsigned long){
-		pkt->buf_physaddr + pkt->data_off, high_qw};
+		pkt->buf_iovaaddr + pkt->data_off, high_qw};
 	*(vector unsigned long *)txdp = descriptor;
 }
 
diff --git a/drivers/net/i40e/i40e_rxtx_vec_neon.c b/drivers/net/i40e/i40e_rxtx_vec_neon.c
index 694e91f33..b858d9f1d 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_neon.c
+++ b/drivers/net/i40e/i40e_rxtx_vec_neon.c
@@ -81,13 +81,13 @@ i40e_rxq_rearm(struct i40e_rx_queue *rxq)
 		mb0 = rxep[0].mbuf;
 		mb1 = rxep[1].mbuf;
 
-		paddr = mb0->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+		paddr = mb0->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 		dma_addr0 = vdupq_n_u64(paddr);
 
 		/* flush desc with pa dma_addr */
 		vst1q_u64((uint64_t *)&rxdp++->read, dma_addr0);
 
-		paddr = mb1->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+		paddr = mb1->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 		dma_addr1 = vdupq_n_u64(paddr);
 		vst1q_u64((uint64_t *)&rxdp++->read, dma_addr1);
 	}
@@ -515,7 +515,7 @@ vtx1(volatile struct i40e_tx_desc *txdp,
 			((uint64_t)flags  << I40E_TXD_QW1_CMD_SHIFT) |
 			((uint64_t)pkt->data_len << I40E_TXD_QW1_TX_BUF_SZ_SHIFT));
 
-	uint64x2_t descriptor = {pkt->buf_physaddr + pkt->data_off, high_qw};
+	uint64x2_t descriptor = {pkt->buf_iovaaddr + pkt->data_off, high_qw};
 	vst1q_u64((uint64_t *)txdp, descriptor);
 }
 
diff --git a/drivers/net/i40e/i40e_rxtx_vec_sse.c b/drivers/net/i40e/i40e_rxtx_vec_sse.c
index 779f14e53..35928ad79 100644
--- a/drivers/net/i40e/i40e_rxtx_vec_sse.c
+++ b/drivers/net/i40e/i40e_rxtx_vec_sse.c
@@ -86,8 +86,8 @@ i40e_rxq_rearm(struct i40e_rx_queue *rxq)
 		mb0 = rxep[0].mbuf;
 		mb1 = rxep[1].mbuf;
 
-		/* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
-		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_physaddr) !=
+		/* load buf_addr(lo 64bit) and buf_iovaaddr(hi 64bit) */
+		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_iovaaddr) !=
 				offsetof(struct rte_mbuf, buf_addr) + 8);
 		vaddr0 = _mm_loadu_si128((__m128i *)&mb0->buf_addr);
 		vaddr1 = _mm_loadu_si128((__m128i *)&mb1->buf_addr);
@@ -549,7 +549,7 @@ vtx1(volatile struct i40e_tx_desc *txdp,
 			((uint64_t)pkt->data_len << I40E_TXD_QW1_TX_BUF_SZ_SHIFT));
 
 	__m128i descriptor = _mm_set_epi64x(high_qw,
-				pkt->buf_physaddr + pkt->data_off);
+				pkt->buf_iovaaddr + pkt->data_off);
 	_mm_store_si128((__m128i *)txdp, descriptor);
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c
index 44de1caac..571f578ce 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c
@@ -87,13 +87,13 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)
 		 * Data to be rearmed is 6 bytes long.
 		 */
 		vst1_u8((uint8_t *)&mb0->rearm_data, p);
-		paddr = mb0->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+		paddr = mb0->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 		dma_addr0 = vsetq_lane_u64(paddr, zero, 0);
 		/* flush desc with pa dma_addr */
 		vst1q_u64((uint64_t *)&rxdp++->read, dma_addr0);
 
 		vst1_u8((uint8_t *)&mb1->rearm_data, p);
-		paddr = mb1->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+		paddr = mb1->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 		dma_addr1 = vsetq_lane_u64(paddr, zero, 0);
 		vst1q_u64((uint64_t *)&rxdp++->read, dma_addr1);
 	}
@@ -414,7 +414,7 @@ vtx1(volatile union ixgbe_adv_tx_desc *txdp,
 		struct rte_mbuf *pkt, uint64_t flags)
 {
 	uint64x2_t descriptor = {
-			pkt->buf_physaddr + pkt->data_off,
+			pkt->buf_iovaaddr + pkt->data_off,
 			(uint64_t)pkt->pkt_len << 46 | flags | pkt->data_len};
 
 	vst1q_u64((uint64_t *)&txdp->read, descriptor);
diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c
index e704a7f35..345010f4d 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c
@@ -86,8 +86,8 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)
 		mb0 = rxep[0].mbuf;
 		mb1 = rxep[1].mbuf;
 
-		/* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
-		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_physaddr) !=
+		/* load buf_addr(lo 64bit) and buf_iovaaddr(hi 64bit) */
+		RTE_BUILD_BUG_ON(offsetof(struct rte_mbuf, buf_iovaaddr) !=
 				offsetof(struct rte_mbuf, buf_addr) + 8);
 		vaddr0 = _mm_loadu_si128((__m128i *)&(mb0->buf_addr));
 		vaddr1 = _mm_loadu_si128((__m128i *)&(mb1->buf_addr));
@@ -604,7 +604,7 @@ vtx1(volatile union ixgbe_adv_tx_desc *txdp,
 {
 	__m128i descriptor = _mm_set_epi64x((uint64_t)pkt->pkt_len << 46 |
 			flags | pkt->data_len,
-			pkt->buf_physaddr + pkt->data_off);
+			pkt->buf_iovaaddr + pkt->data_off);
 	_mm_store_si128((__m128i *)&txdp->read, descriptor);
 }
 
diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 92b03c4cb..fcd472eb4 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -105,7 +105,7 @@ static uint16_t nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 #define NFP_QCP_MAX_ADD	0x7f
 
 #define RTE_MBUF_DMA_ADDR_DEFAULT(mb) \
-	(uint64_t)((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
+	(uint64_t)((mb)->buf_iovaaddr + RTE_PKTMBUF_HEADROOM)
 
 /* nfp_qcp_ptr - Read or Write Pointer of a queue */
 enum nfp_qcp_ptr {
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index e320811ed..0beb8a387 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -491,7 +491,7 @@ virtio_init_queue(struct rte_eth_dev *dev, uint16_t vtpci_queue_idx)
 	 * VIRTIO_MBUF_DATA_DMA_ADDR in virtqueue.h for more information.
 	 */
 	if (!hw->virtio_user_dev)
-		vq->offset = offsetof(struct rte_mbuf, buf_physaddr);
+		vq->offset = offsetof(struct rte_mbuf, buf_iovaaddr);
 	else {
 		vq->vq_ring_mem = (uintptr_t)mz->addr;
 		vq->offset = offsetof(struct rte_mbuf, buf_addr);
diff --git a/drivers/net/virtio/virtqueue.h b/drivers/net/virtio/virtqueue.h
index cb1b2a6e9..21733c0e2 100644
--- a/drivers/net/virtio/virtqueue.h
+++ b/drivers/net/virtio/virtqueue.h
@@ -80,7 +80,7 @@ struct rte_mbuf;
 #define VIRTIO_MBUF_ADDR(mb, vq) \
 	((uint64_t)(*(uintptr_t *)((uintptr_t)(mb) + (vq)->offset)))
 #else
-#define VIRTIO_MBUF_ADDR(mb, vq) ((mb)->buf_physaddr)
+#define VIRTIO_MBUF_ADDR(mb, vq) ((mb)->buf_iovaaddr)
 #endif
 
 /**
diff --git a/lib/librte_eal/common/eal_common_memory.c b/lib/librte_eal/common/eal_common_memory.c
index 996877ef5..5ed83d20a 100644
--- a/lib/librte_eal/common/eal_common_memory.c
+++ b/lib/librte_eal/common/eal_common_memory.c
@@ -100,7 +100,7 @@ rte_dump_physmem_layout(FILE *f)
 		       "virt:%p, socket_id:%"PRId32", "
 		       "hugepage_sz:%"PRIu64", nchannel:%"PRIx32", "
 		       "nrank:%"PRIx32"\n", i,
-		       mcfg->memseg[i].phys_addr,
+		       mcfg->memseg[i].iova_addr,
 		       mcfg->memseg[i].len,
 		       mcfg->memseg[i].addr,
 		       mcfg->memseg[i].socket_id,
diff --git a/lib/librte_eal/common/include/rte_memory.h b/lib/librte_eal/common/include/rte_memory.h
index 5face8c86..fc0fdf740 100644
--- a/lib/librte_eal/common/include/rte_memory.h
+++ b/lib/librte_eal/common/include/rte_memory.h
@@ -105,7 +105,7 @@ typedef uint64_t iova_addr_t; /**< Physical address definition. */
  * Physical memory segment descriptor.
  */
 struct rte_memseg {
-	iova_addr_t phys_addr;      /**< Start physical address. */
+	iova_addr_t iova_addr;      /**< Start iova(_pa/_va) address. */
 	RTE_STD_C11
 	union {
 		void *addr;         /**< Start virtual address. */
diff --git a/lib/librte_eal/common/rte_malloc.c b/lib/librte_eal/common/rte_malloc.c
index 3ce6034bf..d03a5348a 100644
--- a/lib/librte_eal/common/rte_malloc.c
+++ b/lib/librte_eal/common/rte_malloc.c
@@ -254,7 +254,7 @@ rte_malloc_virt2phy(const void *addr)
 	const struct malloc_elem *elem = malloc_elem_from_data(addr);
 	if (elem == NULL)
 		return RTE_BAD_PHYS_ADDR;
-	if (elem->ms->phys_addr == RTE_BAD_PHYS_ADDR)
+	if (elem->ms->iova_addr == RTE_BAD_PHYS_ADDR)
 		return RTE_BAD_PHYS_ADDR;
-	return elem->ms->phys_addr + ((uintptr_t)addr - (uintptr_t)elem->ms->addr);
+	return elem->ms->iova_addr + ((uintptr_t)addr - (uintptr_t)elem->ms->addr);
 }
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
index 405c15bcd..5d9702c72 100644
--- a/lib/librte_eal/linuxapp/eal/eal_memory.c
+++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
@@ -154,7 +154,7 @@ rte_mem_virt2phy(const void *virtaddr)
 			if (virtaddr > memseg->addr &&
 					virtaddr < RTE_PTR_ADD(memseg->addr,
 						memseg->len)) {
-				return memseg->phys_addr +
+				return memseg->iova_addr +
 					RTE_PTR_DIFF(virtaddr, memseg->addr);
 			}
 		}
@@ -1059,7 +1059,7 @@ rte_eal_hugepage_init(void)
 					strerror(errno));
 			return -1;
 		}
-		mcfg->memseg[0].phys_addr = RTE_BAD_PHYS_ADDR;
+		mcfg->memseg[0].iova_addr = RTE_BAD_PHYS_ADDR;
 		mcfg->memseg[0].addr = addr;
 		mcfg->memseg[0].hugepage_sz = RTE_PGSIZE_4K;
 		mcfg->memseg[0].len = internal_config.memory;
@@ -1319,7 +1319,7 @@ rte_eal_hugepage_init(void)
 			if (j == RTE_MAX_MEMSEG)
 				break;
 
-			mcfg->memseg[j].phys_addr = hugepage[i].physaddr;
+			mcfg->memseg[j].iova_addr = hugepage[i].physaddr;
 			mcfg->memseg[j].addr = hugepage[i].final_va;
 			mcfg->memseg[j].len = hugepage[i].size;
 			mcfg->memseg[j].socket_id = hugepage[i].socket_id;
@@ -1330,7 +1330,7 @@ rte_eal_hugepage_init(void)
 #ifdef RTE_ARCH_PPC_64
 		/* Use the phy and virt address of the last page as segment
 		 * address for IBM Power architecture */
-			mcfg->memseg[j].phys_addr = hugepage[i].physaddr;
+			mcfg->memseg[j].iova_addr = hugepage[i].physaddr;
 			mcfg->memseg[j].addr = hugepage[i].final_va;
 #endif
 			mcfg->memseg[j].len += mcfg->memseg[j].hugepage_sz;
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c
index 946df7e31..c03fd713c 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
@@ -706,7 +706,7 @@ vfio_type1_dma_map(int vfio_container_fd)
 		dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
 		dma_map.vaddr = ms[i].addr_64;
 		dma_map.size = ms[i].len;
-		dma_map.iova = ms[i].phys_addr;
+		dma_map.iova = ms[i].iova_addr;
 		dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
 
 		ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map);
@@ -792,7 +792,7 @@ vfio_spapr_dma_map(int vfio_container_fd)
 		dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
 		dma_map.vaddr = ms[i].addr_64;
 		dma_map.size = ms[i].len;
-		dma_map.iova = ms[i].phys_addr;
+		dma_map.iova = ms[i].iova_addr;
 		dma_map.flags = VFIO_DMA_MAP_FLAG_READ |
 				 VFIO_DMA_MAP_FLAG_WRITE;
 
diff --git a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
index 7960afee2..4985b3079 100644
--- a/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
+++ b/lib/librte_eal/linuxapp/eal/include/exec-env/rte_kni_common.h
@@ -116,7 +116,7 @@ struct rte_kni_fifo {
  */
 struct rte_kni_mbuf {
 	void *buf_addr __attribute__((__aligned__(RTE_CACHE_LINE_SIZE)));
-	uint64_t buf_physaddr;
+	uint64_t buf_iovaaddr;
 	uint16_t data_off;      /**< Start address of data in segment buffer. */
 	char pad1[2];
 	uint16_t nb_segs;       /**< Number of segments. */
diff --git a/lib/librte_eal/linuxapp/kni/kni_net.c b/lib/librte_eal/linuxapp/kni/kni_net.c
index db9f48989..7f986f482 100644
--- a/lib/librte_eal/linuxapp/kni/kni_net.c
+++ b/lib/librte_eal/linuxapp/kni/kni_net.c
@@ -69,7 +69,7 @@ pa2va(void *pa, struct rte_kni_mbuf *m)
 
 	va = (void *)((unsigned long)pa +
 			(unsigned long)m->buf_addr -
-			(unsigned long)m->buf_physaddr);
+			(unsigned long)m->buf_iovaaddr);
 	return va;
 }
 
@@ -77,7 +77,7 @@ pa2va(void *pa, struct rte_kni_mbuf *m)
 static void *
 kva2data_kva(struct rte_kni_mbuf *m)
 {
-	return phys_to_virt(m->buf_physaddr + m->data_off);
+	return phys_to_virt(m->buf_iovaaddr + m->data_off);
 }
 
 /* virtual address to physical address */
@@ -88,7 +88,7 @@ va2pa(void *va, struct rte_kni_mbuf *m)
 
 	pa = (void *)((unsigned long)va -
 			((unsigned long)m->buf_addr -
-			 (unsigned long)m->buf_physaddr));
+			 (unsigned long)m->buf_iovaaddr));
 	return pa;
 }
 
diff --git a/lib/librte_kni/rte_kni.c b/lib/librte_kni/rte_kni.c
index 8c483c1f4..d12dde77d 100644
--- a/lib/librte_kni/rte_kni.c
+++ b/lib/librte_kni/rte_kni.c
@@ -456,7 +456,7 @@ va2pa(struct rte_mbuf *m)
 {
 	return (void *)((unsigned long)m -
 			((unsigned long)m->buf_addr -
-			 (unsigned long)m->buf_physaddr));
+			 (unsigned long)m->buf_iovaaddr));
 }
 
 static void
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 26a62b8e1..0ff3acaba 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -135,7 +135,7 @@ rte_pktmbuf_init(struct rte_mempool *mp,
 	/* start of buffer is after mbuf structure and priv data */
 	m->priv_size = priv_size;
 	m->buf_addr = (char *)m + mbuf_size;
-	m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+	m->buf_iovaaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
 	m->buf_len = (uint16_t)buf_len;
 
 	/* keep some headroom between start of buffer and data */
@@ -211,7 +211,7 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header)
 	/* generic checks */
 	if (m->pool == NULL)
 		rte_panic("bad mbuf pool\n");
-	if (m->buf_physaddr == 0)
+	if (m->buf_iovaaddr == 0)
 		rte_panic("bad phys addr\n");
 	if (m->buf_addr == NULL)
 		rte_panic("bad virt addr\n");
@@ -244,7 +244,7 @@ rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len)
 	__rte_mbuf_sanity_check(m, 1);
 
 	fprintf(f, "dump mbuf at %p, phys=%"PRIx64", buf_len=%u\n",
-	       m, (uint64_t)m->buf_physaddr, (unsigned)m->buf_len);
+	       m, (uint64_t)m->buf_iovaaddr, (unsigned)m->buf_len);
 	fprintf(f, "  pkt_len=%"PRIu32", ol_flags=%"PRIx64", nb_segs=%u, "
 	       "in_port=%u\n", m->pkt_len, m->ol_flags,
 	       (unsigned)m->nb_segs, (unsigned)m->port);
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 4563b5dc3..995b86ced 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -411,7 +411,7 @@ struct rte_mbuf {
 	 * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
 	 * working on vector drivers easier.
 	 */
-	iova_addr_t buf_physaddr __rte_aligned(sizeof(iova_addr_t));
+	iova_addr_t buf_iovaaddr __rte_aligned(sizeof(iova_addr_t));
 
 	/* next 8 bytes are initialised on RX descriptor rearm */
 	MARKER64 rearm_data;
@@ -597,7 +597,7 @@ static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
 static inline iova_addr_t
 rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
 {
-	return mb->buf_physaddr + mb->data_off;
+	return mb->buf_iovaaddr + mb->data_off;
 }
 
 /**
@@ -615,7 +615,7 @@ rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
 static inline iova_addr_t
 rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
 {
-	return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+	return mb->buf_iovaaddr + RTE_PKTMBUF_HEADROOM;
 }
 
 /**
@@ -806,7 +806,7 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
  * For standard needs, prefer rte_pktmbuf_alloc().
  *
  * The caller can expect that the following fields of the mbuf structure
- * are initialized: buf_addr, buf_physaddr, buf_len, refcnt=1, nb_segs=1,
+ * are initialized: buf_addr, buf_iovaaddr, buf_len, refcnt=1, nb_segs=1,
  * next=NULL, pool, priv_size. The other fields must be initialized
  * by the caller.
  *
@@ -1214,7 +1214,7 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
 
 	rte_mbuf_refcnt_update(md, 1);
 	mi->priv_size = m->priv_size;
-	mi->buf_physaddr = m->buf_physaddr;
+	mi->buf_iovaaddr = m->buf_iovaaddr;
 	mi->buf_addr = m->buf_addr;
 	mi->buf_len = m->buf_len;
 
@@ -1262,7 +1262,7 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
 
 	m->priv_size = priv_size;
 	m->buf_addr = (char *)m + mbuf_size;
-	m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+	m->buf_iovaaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
 	m->buf_len = (uint16_t)buf_len;
 	rte_pktmbuf_reset_headroom(m);
 	m->data_len = 0;
@@ -1533,7 +1533,7 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
  *   The offset into the data to calculate address from.
  */
 #define rte_pktmbuf_mtophys_offset(m, o) \
-	(iova_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+	(iova_addr_t)((m)->buf_iovaaddr + (m)->data_off + (o))
 
 /**
  * A macro that returns the physical address that points to the start of the
diff --git a/lib/librte_vhost/virtio_net.c b/lib/librte_vhost/virtio_net.c
index a5f0eebaa..73b92b378 100644
--- a/lib/librte_vhost/virtio_net.c
+++ b/lib/librte_vhost/virtio_net.c
@@ -838,7 +838,7 @@ copy_desc_to_mbuf(struct virtio_net *dev, struct vring_desc *descs,
 			cur->data_len = cpy_len;
 			cur->data_off = 0;
 			cur->buf_addr = (void *)(uintptr_t)desc_addr;
-			cur->buf_physaddr = hpa;
+			cur->buf_iovaaddr = hpa;
 
 			/*
 			 * In zero copy mode, one mbuf can only reference data
diff --git a/test/test/test_mbuf.c b/test/test/test_mbuf.c
index 3396b4a93..326b75dca 100644
--- a/test/test/test_mbuf.c
+++ b/test/test/test_mbuf.c
@@ -907,7 +907,7 @@ test_failing_mbuf_sanity_check(struct rte_mempool *pktmbuf_pool)
 	}
 
 	badbuf = *buf;
-	badbuf.buf_physaddr = 0;
+	badbuf.buf_iovaaddr = 0;
 	if (verify_mbuf_check_panics(&badbuf)) {
 		printf("Error with bad-physaddr mbuf test\n");
 		return -1;
-- 
2.11.0

  parent reply	other threads:[~2017-08-14 15:16 UTC|newest]

Thread overview: 91+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-14 15:15 [dpdk-dev] [PATCH v1 0/4] make dpdk iova aware Santosh Shukla
2017-08-14 15:15 ` [dpdk-dev] [PATCH v1 1/4] eal: rename phys_addr_t to iova_addr_t Santosh Shukla
2017-09-18 14:06   ` Burakov, Anatoly
2017-09-18 14:31     ` santosh
2017-09-18 14:32     ` Burakov, Anatoly
2017-08-14 15:15 ` Santosh Shukla [this message]
2017-08-14 15:15 ` [dpdk-dev] [PATCH v1 3/4] eal/memory: rename memory translational api to _iova types Santosh Shukla
2017-08-14 15:15 ` [dpdk-dev] [PATCH v1 4/4] doc: remove dpdk iova aware notice Santosh Shukla
2017-09-18 18:44   ` Mcnamara, John
2017-09-05 10:31 ` [dpdk-dev] [PATCH v2 0/5] make dpdk iova aware Santosh Shukla
2017-09-05 10:31   ` [dpdk-dev] [PATCH v2 1/5] eal: rename phys_addr_t to iova_addr_t Santosh Shukla
2017-09-18 15:19     ` Burakov, Anatoly
2017-09-05 10:31   ` [dpdk-dev] [PATCH v2 2/5] eal/memory: rename buf_physaddr to buf_iovaaddr Santosh Shukla
2017-09-18 15:20     ` Burakov, Anatoly
2017-09-05 10:31   ` [dpdk-dev] [PATCH v2 3/5] eal/memory: rename memseg member phys to iova addr Santosh Shukla
2017-09-18 15:04     ` Burakov, Anatoly
2017-09-18 15:08       ` santosh
2017-09-18 15:11         ` Burakov, Anatoly
2017-09-18 15:21     ` Burakov, Anatoly
2017-09-05 10:31   ` [dpdk-dev] [PATCH v2 4/5] eal/memory: rename memory api to iova types Santosh Shukla
2017-09-05 10:31   ` [dpdk-dev] [PATCH v2 5/5] doc: remove dpdk iova aware notice Santosh Shukla
2017-09-19 13:38     ` Mcnamara, John
2017-10-17 13:31   ` [dpdk-dev] [PATCH v2 0/5] make dpdk iova aware Thomas Monjalon
2017-10-17 14:12     ` santosh
2017-10-20 12:31   ` [dpdk-dev] [PATCH v3 0/6] " Santosh Shukla
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 1/6] eal: rename phys addr to iova addr Santosh Shukla
2017-10-23 20:32       ` Thomas Monjalon
2017-10-24  5:16         ` santosh
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 2/6] eal/memory: rename buf physaddr to buf iovaaddr Santosh Shukla
2017-10-23 20:15       ` Thomas Monjalon
2017-10-25  9:55         ` Olivier MATZ
2017-10-23 20:34       ` Thomas Monjalon
2017-10-24  5:17         ` santosh
2017-10-25  9:44       ` Olivier MATZ
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 3/6] eal/memory: rename memseg member phys to iova addr Santosh Shukla
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 4/6] eal/memory: rename memory API to iova types Santosh Shukla
2017-11-03 11:11       ` Thomas Monjalon
2017-11-03 11:35         ` santosh
2017-11-03 13:58           ` Thomas Monjalon
2017-11-03 15:22             ` [dpdk-dev] [PATCH v3 4/6] eal/memory: rename memory API to iovatypes Jonas Pfefferle1
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 5/6] doc: remove dpdk iova aware notice Santosh Shukla
2017-10-23 20:29       ` Thomas Monjalon
2017-10-24  5:06         ` santosh
2017-10-25  9:45           ` Thomas Monjalon
2017-10-25  9:50             ` Richardson, Bruce
2017-10-25 10:01               ` Thomas Monjalon
2017-10-25 10:05                 ` Bruce Richardson
2017-10-25 10:12                   ` Thomas Monjalon
2017-10-25 10:32                     ` Bruce Richardson
2017-10-20 12:31     ` [dpdk-dev] [PATCH v3 6/6] eal/common/rte_malloc: use pointer diff in virt2iova Santosh Shukla
2017-10-23 14:58     ` [dpdk-dev] [PATCH v3 0/6] make dpdk iova aware Thomas Monjalon
2017-10-24  5:12       ` santosh
2017-10-24  7:38         ` Thomas Monjalon
2017-11-06  1:41 ` [dpdk-dev] [PATCH v4 00/15] make DPDK IOVA aware Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 01/15] mem: hide physical address error in VA mode Thomas Monjalon
2017-11-06  5:39     ` santosh
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 02/15] mem: introduce IOVA type Thomas Monjalon
2017-11-06  5:38     ` santosh
2017-11-06  8:37       ` Thomas Monjalon
2017-11-06  8:51         ` santosh
2017-11-06  9:08           ` Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 03/15] mem: rename segment address from physical to IOVA Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 04/15] mem: rename address mapping function " Thomas Monjalon
2017-11-06  5:41     ` santosh
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 05/15] malloc: " Thomas Monjalon
2017-11-06  5:47     ` santosh
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 06/15] malloc: use pointer diff macro in IOVA mapping Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 07/15] memzone: rename address from physical to IOVA Thomas Monjalon
2017-11-06  5:50     ` santosh
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 08/15] mempool: rename addresses " Thomas Monjalon
2017-11-06  5:52     ` santosh
2017-11-06 15:44     ` Olivier MATZ
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 09/15] mempool: rename address mapping function " Thomas Monjalon
2017-11-06  5:54     ` santosh
2017-11-06 15:44     ` Olivier MATZ
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 10/15] mempool: rename populate functions " Thomas Monjalon
2017-11-06 15:49     ` Olivier MATZ
2017-11-06 15:58       ` Thomas Monjalon
2017-11-06 16:39         ` Olivier MATZ
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 11/15] mbuf: rename physical address " Thomas Monjalon
2017-11-06 15:52     ` Olivier MATZ
2017-11-06 16:00       ` Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 12/15] mbuf: rename data address helpers " Thomas Monjalon
2017-11-06 15:56     ` Olivier MATZ
2017-11-06 16:03       ` Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 13/15] cryptodev: rename physical address type " Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 14/15] drivers/net: " Thomas Monjalon
2017-11-06  1:41   ` [dpdk-dev] [PATCH v4 15/15] doc: add IOVA aware API changes in release notes Thomas Monjalon
2017-11-06  5:56     ` santosh
2017-11-06  8:50     ` Mcnamara, John
2017-11-06 22:48   ` [dpdk-dev] [PATCH v4 00/15] make DPDK IOVA aware Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170814151537.29454-3-santosh.shukla@caviumnetworks.com \
    --to=santosh.shukla@caviumnetworks.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerin.jacob@caviumnetworks.com \
    --cc=olivier.matz@6wind.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).