From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Shahaf Shuler <shahafs@mellanox.com>
Cc: adrien.mazarguil@6wind.com, dev@dpdk.org, stable@dpdk.org
Subject: Re: [dpdk-stable] [PATCH v2 2/2] net/mlx5: enforce Tx num of segments limitation
Date: Mon, 4 Sep 2017 16:57:04 +0200 [thread overview]
Message-ID: <20170904145703.3d7onktokegfo2dm@localhost> (raw)
In-Reply-To: <22e16781b4231bc202a377f95e51cdeb999598bf.1504076528.git.shahafs@mellanox.com>
On Wed, Aug 30, 2017 at 10:07:08AM +0300, Shahaf Shuler wrote:
> Mellanox NICs has a limitation on the number of mbuf segments a multi
> segment mbuf can have. The max number depends on the Tx offloads requested.
>
> The current code not enforce such limitation, which might cause
> malformed work requests to be written to the device.
>
> This commit adds verification for the number of mbuf segments posted
> to the device. In case of overflow the packet will not be sent.
> Debug prints were added to help application identify the cause for such
> case.
>
> In addition update the nic documentation with the limitation.
> Considering device limitation is 63 data segments in a work request, the
> maximum number of segment in mbuf was calculated taking TSO as the worst
> case:
>
> max_nb_segs = 63 - (control_segment + ethernet segment +
> TSO headers inline + inline segment +
> extra inline to align to cacheline)
>
> Cc: stable@dpdk.org
>
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> ---
> This patch should be applied only after the series:
> http://dpdk.org/dev/patchwork/patch/27367/
>
> on v2:
> - remove parenthesis around MLX5_MAX_DS.
> - add limitation to nic guide.
> - update commit message.
> - fix typo.
> ---
> doc/guides/nics/mlx5.rst | 2 ++
> drivers/net/mlx5/mlx5_defs.h | 3 ++-
> drivers/net/mlx5/mlx5_prm.h | 3 +++
> drivers/net/mlx5/mlx5_rxtx.c | 30 +++++++++++++++++++++++++++---
> drivers/net/mlx5/mlx5_rxtx_vec_sse.c | 8 ++++++++
> drivers/net/mlx5/mlx5_txq.c | 27 +++++++++++++++++++++++++++
> 6 files changed, 69 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index f4cb18bca..d8244de97 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -124,6 +124,8 @@ Limitations
>
> Will match any ipv4 packet (VLAN included).
>
> +- A multi segment mbuf must have less than 50 segments. That means mbuf->nb_segs < 50.
> +
> Configuration
> -------------
>
> diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
> index a76bc6f65..3de0e5d81 100644
> --- a/drivers/net/mlx5/mlx5_defs.h
> +++ b/drivers/net/mlx5/mlx5_defs.h
> @@ -100,7 +100,8 @@
>
> /*
> * Maximum size of burst for vectorized Tx. This is related to the maximum size
> - * of Enhaned MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
> + * of Enhanced MPW (eMPW) WQE as vectorized Tx is supported with eMPW.
> + * Careful when changing, large value can cause wqe DS to overlap.
> */
> #define MLX5_VPMD_TX_MAX_BURST 32U
>
> diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
> index 608072f7e..bc2b72333 100644
> --- a/drivers/net/mlx5/mlx5_prm.h
> +++ b/drivers/net/mlx5/mlx5_prm.h
> @@ -154,6 +154,9 @@
> /* Default mark value used when none is provided. */
> #define MLX5_FLOW_MARK_DEFAULT 0xffffff
>
> +/* Maximum number of DS in WQE. */
> +#define MLX5_MAX_DS 63
> +
> /* Subset of struct mlx5_wqe_eth_seg. */
> struct mlx5_wqe_eth_seg_small {
> uint32_t rsvd0;
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index fe9e7eac0..d7aa382f9 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -657,6 +657,15 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
> else
> j += sg;
> next_pkt:
> + if (ds > MLX5_MAX_DS) {
> +#ifndef NDEBUG
> + WARN("Cannot send packet %p with %d segments "
> + "wqe.ds = %d, wqe.inline_sz = %d",
> + (void *)pkts, (*pkts)->nb_segs, ds,
> + pkt_inline_sz);
> +#endif
I will say no for those series of warning in the datapath, I understand the
need of such informations, but it will reduce considerably the throughput in
some cases where the issue is not related to this.
Datapath must also be optimised also in debug mode.
I suggestion would be to change the burst API to return an int with correct
errors values.
Currently oerrors can be increased in such situation to provide more
information to the user.
Thanks,
--
Nélio Laranjeiro
6WIND
prev parent reply other threads:[~2017-09-04 14:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-23 7:33 [dpdk-stable] [PATCH 1/2] net/mlx5: fix num seg assumption on vPMD Shahaf Shuler
2017-08-23 7:33 ` [dpdk-stable] [PATCH 2/2] net/mlx5: enforce Tx num of segments limitation Shahaf Shuler
2017-08-24 13:28 ` Nélio Laranjeiro
2017-08-24 13:23 ` [dpdk-stable] [PATCH 1/2] net/mlx5: fix num seg assumption on vPMD Nélio Laranjeiro
2017-08-30 7:07 ` [dpdk-stable] [PATCH v2 " Shahaf Shuler
2017-09-04 14:57 ` Nélio Laranjeiro
2017-09-11 12:50 ` [dpdk-stable] [PATCH v3 1/3] " Shahaf Shuler
2017-09-13 10:50 ` [dpdk-stable] [PATCH v4 1/4] " Shahaf Shuler
2017-09-14 10:50 ` [dpdk-stable] [PATCH v5 " Shahaf Shuler
2017-09-15 10:51 ` Ferruh Yigit
2017-09-14 10:50 ` [dpdk-stable] [PATCH v5 2/4] net/mlx5: fix Tx stats error counter definition Shahaf Shuler
2017-09-14 10:50 ` [dpdk-stable] [PATCH v5 3/4] net/mlx5: fix Tx stats error counter logic Shahaf Shuler
2017-09-14 10:50 ` [dpdk-stable] [PATCH v5 4/4] net/mlx5: enforce Tx num of segments limitation Shahaf Shuler
2017-09-14 19:21 ` Yongseok Koh
2017-09-15 8:11 ` Nélio Laranjeiro
2017-09-13 10:50 ` [dpdk-stable] [PATCH v4 2/4] net/mlx5: fix Tx stats error counter definition Shahaf Shuler
2017-09-13 17:59 ` Yongseok Koh
2017-09-14 8:11 ` Nélio Laranjeiro
2017-09-13 10:50 ` [dpdk-stable] [PATCH v4 3/4] net/mlx5: fix Tx stats error counter logic Shahaf Shuler
2017-09-13 18:17 ` Yongseok Koh
2017-09-14 8:12 ` Nélio Laranjeiro
2017-09-13 10:50 ` [dpdk-stable] [PATCH v4 4/4] net/mlx5: enforce Tx num of segments limitation Shahaf Shuler
2017-09-13 19:51 ` Yongseok Koh
2017-09-14 5:23 ` Shahaf Shuler
2017-09-14 8:05 ` Yongseok Koh
2017-09-11 12:50 ` [dpdk-stable] [PATCH v3 2/3] net/mlx5: fix Tx stats error counter Shahaf Shuler
2017-09-11 12:50 ` [dpdk-stable] [PATCH v3 3/3] net/mlx5: enforce Tx num of segments limitation Shahaf Shuler
2017-08-30 7:07 ` [dpdk-stable] [PATCH v2 2/2] " Shahaf Shuler
2017-09-04 14:57 ` Nélio Laranjeiro [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170904145703.3d7onktokegfo2dm@localhost \
--to=nelio.laranjeiro@6wind.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=shahafs@mellanox.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).