From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH v4 25/41] net/dpaa: add support for Tx and Rx queue setup
Date: Sat, 9 Sep 2017 16:51:16 +0530 [thread overview]
Message-ID: <20170909112132.13936-26-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <20170909112132.13936-1-shreyansh.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
drivers/net/dpaa/Makefile | 4 +
drivers/net/dpaa/dpaa_ethdev.c | 290 +++++++++++++++++++++++++++++++-
drivers/net/dpaa/dpaa_rxtx.c | 370 +++++++++++++++++++++++++++++++++++++++++
drivers/net/dpaa/dpaa_rxtx.h | 61 +++++++
mk/rte.app.mk | 1 +
5 files changed, 723 insertions(+), 3 deletions(-)
create mode 100644 drivers/net/dpaa/dpaa_rxtx.c
create mode 100644 drivers/net/dpaa/dpaa_rxtx.h
diff --git a/drivers/net/dpaa/Makefile b/drivers/net/dpaa/Makefile
index 7ecd5be..9b8debc 100644
--- a/drivers/net/dpaa/Makefile
+++ b/drivers/net/dpaa/Makefile
@@ -43,11 +43,13 @@ else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
endif
+CFLAGS +=-Wno-pointer-arith
CFLAGS += -I$(RTE_SDK_DPAA)/
CFLAGS += -I$(RTE_SDK_DPAA)/include
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
+CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal/include
@@ -57,7 +59,9 @@ LIBABIVER := 1
# Interfaces with DPDK
SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
LDLIBS += -lrte_bus_dpaa
+LDLIBS += -lrte_mempool_dpaa
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index 4543dfc..ab19b2e 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -62,8 +62,15 @@
#include <rte_dpaa_bus.h>
#include <rte_dpaa_logs.h>
+#include <dpaa_mempool.h>
#include <dpaa_ethdev.h>
+#include <dpaa_rxtx.h>
+
+#include <fsl_usd.h>
+#include <fsl_qman.h>
+#include <fsl_bman.h>
+#include <fsl_fman.h>
/* Keep track of whether QMAN and BMAN have been globally initialized */
static int is_global_init;
@@ -78,20 +85,104 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev __rte_unused)
static int dpaa_eth_dev_start(struct rte_eth_dev *dev)
{
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+
PMD_INIT_FUNC_TRACE();
/* Change tx callback to the real one */
- dev->tx_pkt_burst = NULL;
+ dev->tx_pkt_burst = dpaa_eth_queue_tx;
+ fman_if_enable_rx(dpaa_intf->fif);
return 0;
}
static void dpaa_eth_dev_stop(struct rte_eth_dev *dev)
{
- dev->tx_pkt_burst = NULL;
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+
+ PMD_INIT_FUNC_TRACE();
+
+ fman_if_disable_rx(dpaa_intf->fif);
+ dev->tx_pkt_burst = dpaa_eth_tx_drop_all;
}
-static void dpaa_eth_dev_close(struct rte_eth_dev *dev __rte_unused)
+static void dpaa_eth_dev_close(struct rte_eth_dev *dev)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ dpaa_eth_dev_stop(dev);
+}
+
+static
+int dpaa_eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
+ uint16_t nb_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_rxconf *rx_conf __rte_unused,
+ struct rte_mempool *mp)
+{
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+
+ PMD_INIT_FUNC_TRACE();
+
+ DPAA_PMD_INFO("Rx queue setup for queue index: %d", queue_idx);
+
+ if (!dpaa_intf->bp_info || dpaa_intf->bp_info->mp != mp) {
+ struct fman_if_ic_params icp;
+ uint32_t fd_offset;
+ uint32_t bp_size;
+
+ if (!mp->pool_data) {
+ DPAA_PMD_ERR("Not an offloaded buffer pool!");
+ return -1;
+ }
+ dpaa_intf->bp_info = DPAA_MEMPOOL_TO_POOL_INFO(mp);
+
+ memset(&icp, 0, sizeof(icp));
+ /* set ICEOF for to the default value , which is 0*/
+ icp.iciof = DEFAULT_ICIOF;
+ icp.iceof = DEFAULT_RX_ICEOF;
+ icp.icsz = DEFAULT_ICSZ;
+ fman_if_set_ic_params(dpaa_intf->fif, &icp);
+
+ fd_offset = RTE_PKTMBUF_HEADROOM + DPAA_HW_BUF_RESERVE;
+ fman_if_set_fdoff(dpaa_intf->fif, fd_offset);
+
+ /* Buffer pool size should be equal to Dataroom Size*/
+ bp_size = rte_pktmbuf_data_room_size(mp);
+ fman_if_set_bp(dpaa_intf->fif, mp->size,
+ dpaa_intf->bp_info->bpid, bp_size);
+ dpaa_intf->valid = 1;
+ DPAA_PMD_INFO("if =%s - fd_offset = %d offset = %d",
+ dpaa_intf->name, fd_offset,
+ fman_if_get_fdoff(dpaa_intf->fif));
+ }
+ dev->data->rx_queues[queue_idx] = &dpaa_intf->rx_queues[queue_idx];
+
+ return 0;
+}
+
+static
+void dpaa_eth_rx_queue_release(void *rxq __rte_unused)
+{
+ PMD_INIT_FUNC_TRACE();
+}
+
+static
+int dpaa_eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
+ uint16_t nb_desc __rte_unused,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_txconf *tx_conf __rte_unused)
+{
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+
+ PMD_INIT_FUNC_TRACE();
+
+ DPAA_PMD_INFO("Tx queue setup for queue index: %d", queue_idx);
+ dev->data->tx_queues[queue_idx] = &dpaa_intf->tx_queues[queue_idx];
+ return 0;
+}
+
+static void dpaa_eth_tx_queue_release(void *txq __rte_unused)
{
PMD_INIT_FUNC_TRACE();
}
@@ -101,15 +192,102 @@ static struct eth_dev_ops dpaa_devops = {
.dev_start = dpaa_eth_dev_start,
.dev_stop = dpaa_eth_dev_stop,
.dev_close = dpaa_eth_dev_close,
+
+ .rx_queue_setup = dpaa_eth_rx_queue_setup,
+ .tx_queue_setup = dpaa_eth_tx_queue_setup,
+ .rx_queue_release = dpaa_eth_rx_queue_release,
+ .tx_queue_release = dpaa_eth_tx_queue_release,
};
+/* Initialise an Rx FQ */
+static int dpaa_rx_queue_init(struct qman_fq *fq,
+ uint32_t fqid)
+{
+ struct qm_mcc_initfq opts;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ret = qman_reserve_fqid(fqid);
+ if (ret) {
+ DPAA_PMD_ERR("reserve rx fqid %d failed with ret: %d",
+ fqid, ret);
+ return -EINVAL;
+ }
+
+ DPAA_PMD_DEBUG("creating rx fq %p, fqid %d", fq, fqid);
+ ret = qman_create_fq(fqid, QMAN_FQ_FLAG_NO_ENQUEUE, fq);
+ if (ret) {
+ DPAA_PMD_ERR("create rx fqid %d failed with ret: %d",
+ fqid, ret);
+ return ret;
+ }
+
+ opts.we_mask = QM_INITFQ_WE_DESTWQ | QM_INITFQ_WE_FQCTRL |
+ QM_INITFQ_WE_CONTEXTA;
+
+ opts.fqd.dest.wq = DPAA_IF_RX_PRIORITY;
+ opts.fqd.fq_ctrl = QM_FQCTRL_AVOIDBLOCK | QM_FQCTRL_CTXASTASHING |
+ QM_FQCTRL_PREFERINCACHE;
+ opts.fqd.context_a.stashing.exclusive = 0;
+ opts.fqd.context_a.stashing.annotation_cl = DPAA_IF_RX_ANNOTATION_STASH;
+ opts.fqd.context_a.stashing.data_cl = DPAA_IF_RX_DATA_STASH;
+ opts.fqd.context_a.stashing.context_cl = DPAA_IF_RX_CONTEXT_STASH;
+
+ /*Enable tail drop */
+ opts.we_mask = opts.we_mask | QM_INITFQ_WE_TDTHRESH;
+ opts.fqd.fq_ctrl = opts.fqd.fq_ctrl | QM_FQCTRL_TDE;
+ qm_fqd_taildrop_set(&opts.fqd.td, CONG_THRESHOLD_RX_Q, 1);
+
+ ret = qman_init_fq(fq, 0, &opts);
+ if (ret)
+ DPAA_PMD_ERR("init rx fqid %d failed with ret: %d", fqid, ret);
+ return ret;
+}
+
+/* Initialise a Tx FQ */
+static int dpaa_tx_queue_init(struct qman_fq *fq,
+ struct fman_if *fman_intf)
+{
+ struct qm_mcc_initfq opts;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ret = qman_create_fq(0, QMAN_FQ_FLAG_DYNAMIC_FQID |
+ QMAN_FQ_FLAG_TO_DCPORTAL, fq);
+ if (ret) {
+ DPAA_PMD_ERR("create tx fq failed with ret: %d", ret);
+ return ret;
+ }
+ opts.we_mask = QM_INITFQ_WE_DESTWQ | QM_INITFQ_WE_FQCTRL |
+ QM_INITFQ_WE_CONTEXTB | QM_INITFQ_WE_CONTEXTA;
+ opts.fqd.dest.channel = fman_intf->tx_channel_id;
+ opts.fqd.dest.wq = DPAA_IF_TX_PRIORITY;
+ opts.fqd.fq_ctrl = QM_FQCTRL_PREFERINCACHE;
+ opts.fqd.context_b = 0;
+ /* no tx-confirmation */
+ opts.fqd.context_a.hi = 0x80000000 | fman_dealloc_bufs_mask_hi;
+ opts.fqd.context_a.lo = 0 | fman_dealloc_bufs_mask_lo;
+ DPAA_PMD_DEBUG("init tx fq %p, fqid %d", fq, fq->fqid);
+ ret = qman_init_fq(fq, QMAN_INITFQ_FLAG_SCHED, &opts);
+ if (ret)
+ DPAA_PMD_ERR("init tx fqid %d failed %d", fq->fqid, ret);
+ return ret;
+}
+
/* Initialise a network interface */
static int
dpaa_dev_init(struct rte_eth_dev *eth_dev)
{
+ int num_cores, num_rx_fqs, fqid;
+ int loop, ret = 0;
int dev_id;
struct rte_dpaa_device *dpaa_device;
struct dpaa_if *dpaa_intf;
+ struct fm_eth_port_cfg *cfg;
+ struct fman_if *fman_intf;
+ struct fman_if_bpool *bp, *tmp_bp;
PMD_INIT_FUNC_TRACE();
@@ -120,12 +298,104 @@ dpaa_dev_init(struct rte_eth_dev *eth_dev)
dpaa_device = DEV_TO_DPAA_DEVICE(eth_dev->device);
dev_id = dpaa_device->id.dev_id;
dpaa_intf = eth_dev->data->dev_private;
+ cfg = &dpaa_netcfg->port_cfg[dev_id];
+ fman_intf = cfg->fman_if;
dpaa_intf->name = dpaa_device->name;
+ /* save fman_if & cfg in the interface struture */
+ dpaa_intf->fif = fman_intf;
dpaa_intf->ifid = dev_id;
+ dpaa_intf->cfg = cfg;
+
+ /* Initialize Rx FQ's */
+ if (getenv("DPAA_NUM_RX_QUEUES"))
+ num_rx_fqs = atoi(getenv("DPAA_NUM_RX_QUEUES"));
+ else
+ num_rx_fqs = DPAA_DEFAULT_NUM_PCD_QUEUES;
+ /* Each device can not have more than DPAA_PCD_FQID_MULTIPLIER RX
+ * queues.
+ */
+ if (num_rx_fqs <= 0 || num_rx_fqs > DPAA_PCD_FQID_MULTIPLIER) {
+ DPAA_PMD_ERR("Invalid number of RX queues\n");
+ return -EINVAL;
+ }
+
+ dpaa_intf->rx_queues = rte_zmalloc(NULL,
+ sizeof(struct qman_fq) * num_rx_fqs, MAX_CACHELINE);
+ for (loop = 0; loop < num_rx_fqs; loop++) {
+ fqid = DPAA_PCD_FQID_START + dpaa_intf->ifid *
+ DPAA_PCD_FQID_MULTIPLIER + loop;
+ ret = dpaa_rx_queue_init(&dpaa_intf->rx_queues[loop], fqid);
+ if (ret)
+ return ret;
+ dpaa_intf->rx_queues[loop].dpaa_intf = dpaa_intf;
+ }
+ dpaa_intf->nb_rx_queues = num_rx_fqs;
+
+ /* Initialise Tx FQs. Have as many Tx FQ's as number of cores */
+ num_cores = rte_lcore_count();
+ dpaa_intf->tx_queues = rte_zmalloc(NULL, sizeof(struct qman_fq) *
+ num_cores, MAX_CACHELINE);
+ if (!dpaa_intf->tx_queues)
+ return -ENOMEM;
+
+ for (loop = 0; loop < num_cores; loop++) {
+ ret = dpaa_tx_queue_init(&dpaa_intf->tx_queues[loop],
+ fman_intf);
+ if (ret)
+ return ret;
+ dpaa_intf->tx_queues[loop].dpaa_intf = dpaa_intf;
+ }
+ dpaa_intf->nb_tx_queues = num_cores;
+
+ DPAA_PMD_DEBUG("All frame queues created");
+
+ /* reset bpool list, initialize bpool dynamically */
+ list_for_each_entry_safe(bp, tmp_bp, &cfg->fman_if->bpool_list, node) {
+ list_del(&bp->node);
+ rte_free(bp);
+ }
+
+ /* Populate ethdev structure */
eth_dev->dev_ops = &dpaa_devops;
+ eth_dev->rx_pkt_burst = dpaa_eth_queue_rx;
+ eth_dev->tx_pkt_burst = dpaa_eth_tx_drop_all;
+
+ /* Allocate memory for storing MAC addresses */
+ eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
+ ETHER_ADDR_LEN * DPAA_MAX_MAC_FILTER, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ DPAA_PMD_ERR("Failed to allocate %d bytes needed to "
+ "store MAC addresses",
+ ETHER_ADDR_LEN * DPAA_MAX_MAC_FILTER);
+ return -ENOMEM;
+ }
+
+ /* copy the primary mac address */
+ memcpy(eth_dev->data->mac_addrs[0].addr_bytes,
+ fman_intf->mac_addr.addr_bytes,
+ ETHER_ADDR_LEN);
+
+ RTE_LOG(INFO, PMD, "net: dpaa: %s: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dpaa_device->name,
+ fman_intf->mac_addr.addr_bytes[0],
+ fman_intf->mac_addr.addr_bytes[1],
+ fman_intf->mac_addr.addr_bytes[2],
+ fman_intf->mac_addr.addr_bytes[3],
+ fman_intf->mac_addr.addr_bytes[4],
+ fman_intf->mac_addr.addr_bytes[5]);
+
+ /* Disable RX mode */
+ fman_if_discard_rx_errors(fman_intf);
+ fman_if_disable_rx(fman_intf);
+ /* Disable promiscuous mode */
+ fman_if_promiscuous_disable(fman_intf);
+ /* Disable multicast */
+ fman_if_reset_mcast_filter_table(fman_intf);
+ /* Reset interface statistics */
+ fman_if_stats_reset(fman_intf);
return 0;
}
@@ -147,6 +417,20 @@ dpaa_dev_uninit(struct rte_eth_dev *dev)
dpaa_eth_dev_close(dev);
+ /* release configuration memory */
+ if (dpaa_intf->fc_conf)
+ rte_free(dpaa_intf->fc_conf);
+
+ rte_free(dpaa_intf->rx_queues);
+ dpaa_intf->rx_queues = NULL;
+
+ rte_free(dpaa_intf->tx_queues);
+ dpaa_intf->tx_queues = NULL;
+
+ /* free memory for storing MAC addresses */
+ rte_free(dev->data->mac_addrs);
+ dev->data->mac_addrs = NULL;
+
dev->dev_ops = NULL;
dev->rx_pkt_burst = NULL;
dev->tx_pkt_burst = NULL;
diff --git a/drivers/net/dpaa/dpaa_rxtx.c b/drivers/net/dpaa/dpaa_rxtx.c
new file mode 100644
index 0000000..80adf9c
--- /dev/null
+++ b/drivers/net/dpaa/dpaa_rxtx.c
@@ -0,0 +1,370 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright 2017 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* System headers */
+#include <stdio.h>
+#include <inttypes.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <limits.h>
+#include <sched.h>
+#include <pthread.h>
+
+#include <rte_config.h>
+#include <rte_byteorder.h>
+#include <rte_common.h>
+#include <rte_interrupts.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_pci.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_alarm.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_atomic.h>
+#include <rte_malloc.h>
+#include <rte_ring.h>
+#include <rte_ip.h>
+#include <rte_tcp.h>
+#include <rte_udp.h>
+
+#include "dpaa_ethdev.h"
+#include "dpaa_rxtx.h"
+#include <rte_dpaa_bus.h>
+#include <dpaa_mempool.h>
+
+#include <fsl_usd.h>
+#include <fsl_qman.h>
+#include <fsl_bman.h>
+#include <of.h>
+#include <netcfg.h>
+
+#define DPAA_MBUF_TO_CONTIG_FD(_mbuf, _fd, _bpid) \
+ do { \
+ (_fd)->cmd = 0; \
+ (_fd)->opaque_addr = 0; \
+ (_fd)->opaque = QM_FD_CONTIG << DPAA_FD_FORMAT_SHIFT; \
+ (_fd)->opaque |= ((_mbuf)->data_off) << DPAA_FD_OFFSET_SHIFT; \
+ (_fd)->opaque |= (_mbuf)->pkt_len; \
+ (_fd)->addr = (_mbuf)->buf_physaddr; \
+ (_fd)->bpid = _bpid; \
+ } while (0)
+
+static inline struct rte_mbuf *dpaa_eth_fd_to_mbuf(struct qm_fd *fd,
+ uint32_t ifid)
+{
+ struct dpaa_bp_info *bp_info = DPAA_BPID_TO_POOL_INFO(fd->bpid);
+ struct rte_mbuf *mbuf;
+ void *ptr;
+ uint16_t offset =
+ (fd->opaque & DPAA_FD_OFFSET_MASK) >> DPAA_FD_OFFSET_SHIFT;
+ uint32_t length = fd->opaque & DPAA_FD_LENGTH_MASK;
+
+ DPAA_RX_LOG(DEBUG, " FD--->MBUF");
+
+ /* Ignoring case when format != qm_fd_contig */
+ ptr = rte_dpaa_mem_ptov(fd->addr);
+ /* Ignoring case when ptr would be NULL. That is only possible incase
+ * of a corrupted packet
+ */
+
+ mbuf = (struct rte_mbuf *)((char *)ptr - bp_info->meta_data_size);
+ /* Prefetch the Parse results and packet data to L1 */
+ rte_prefetch0((void *)((uint8_t *)ptr + DEFAULT_RX_ICEOF));
+ rte_prefetch0((void *)((uint8_t *)ptr + offset));
+
+ mbuf->data_off = offset;
+ mbuf->data_len = length;
+ mbuf->pkt_len = length;
+
+ mbuf->port = ifid;
+ mbuf->nb_segs = 1;
+ mbuf->ol_flags = 0;
+ mbuf->next = NULL;
+ rte_mbuf_refcnt_set(mbuf, 1);
+
+ return mbuf;
+}
+
+uint16_t dpaa_eth_queue_rx(void *q,
+ struct rte_mbuf **bufs,
+ uint16_t nb_bufs)
+{
+ struct qman_fq *fq = q;
+ struct qm_dqrr_entry *dq;
+ uint32_t num_rx = 0, ifid = ((struct dpaa_if *)fq->dpaa_intf)->ifid;
+ int ret;
+
+ ret = rte_dpaa_portal_init((void *)0);
+ if (ret) {
+ DPAA_PMD_ERR("Failure in affining portal");
+ return 0;
+ }
+
+ ret = qman_set_vdq(fq, (nb_bufs > DPAA_MAX_DEQUEUE_NUM_FRAMES) ?
+ DPAA_MAX_DEQUEUE_NUM_FRAMES : nb_bufs);
+ if (ret)
+ return 0;
+
+ do {
+ dq = qman_dequeue(fq);
+ if (!dq)
+ continue;
+ bufs[num_rx++] = dpaa_eth_fd_to_mbuf(&dq->fd, ifid);
+ qman_dqrr_consume(fq, dq);
+ } while (fq->flags & QMAN_FQ_STATE_VDQCR);
+
+ return num_rx;
+}
+
+static void *dpaa_get_pktbuf(struct dpaa_bp_info *bp_info)
+{
+ int ret;
+ uint64_t buf = 0;
+ struct bm_buffer bufs;
+
+ ret = bman_acquire(bp_info->bp, &bufs, 1, 0);
+ if (ret <= 0) {
+ DPAA_PMD_WARN("Failed to allocate buffers %d", ret);
+ return (void *)buf;
+ }
+
+ DPAA_RX_LOG(DEBUG, "got buffer 0x%lx from pool %d",
+ (uint64_t)bufs.addr, bufs.bpid);
+
+ buf = (uint64_t)rte_dpaa_mem_ptov(bufs.addr) - bp_info->meta_data_size;
+ if (!buf)
+ goto out;
+
+out:
+ return (void *)buf;
+}
+
+static struct rte_mbuf *dpaa_get_dmable_mbuf(struct rte_mbuf *mbuf,
+ struct dpaa_if *dpaa_intf)
+{
+ struct rte_mbuf *dpaa_mbuf;
+
+ /* allocate pktbuffer on bpid for dpaa port */
+ dpaa_mbuf = dpaa_get_pktbuf(dpaa_intf->bp_info);
+ if (!dpaa_mbuf)
+ return NULL;
+
+ memcpy((uint8_t *)(dpaa_mbuf->buf_addr) + mbuf->data_off, (void *)
+ ((uint8_t *)(mbuf->buf_addr) + mbuf->data_off), mbuf->pkt_len);
+
+ /* Copy only the required fields */
+ dpaa_mbuf->data_off = mbuf->data_off;
+ dpaa_mbuf->pkt_len = mbuf->pkt_len;
+ dpaa_mbuf->ol_flags = mbuf->ol_flags;
+ dpaa_mbuf->packet_type = mbuf->packet_type;
+ dpaa_mbuf->tx_offload = mbuf->tx_offload;
+ rte_pktmbuf_free(mbuf);
+ return dpaa_mbuf;
+}
+
+/* Handle mbufs which are not segmented (non SG) */
+static inline void
+tx_on_dpaa_pool_unsegmented(struct rte_mbuf *mbuf,
+ struct dpaa_bp_info *bp_info,
+ struct qm_fd *fd_arr)
+{
+ struct rte_mbuf *mi = NULL;
+
+ if (RTE_MBUF_DIRECT(mbuf)) {
+ if (rte_mbuf_refcnt_read(mbuf) > 1) {
+ /* In case of direct mbuf and mbuf being cloned,
+ * BMAN should _not_ release buffer.
+ */
+ DPAA_MBUF_TO_CONTIG_FD(mbuf, fd_arr, 0xff);
+ /* Buffer should be releasd by EAL */
+ rte_mbuf_refcnt_update(mbuf, -1);
+ } else {
+ /* In case of direct mbuf and no cloning, mbuf can be
+ * released by BMAN.
+ */
+ DPAA_MBUF_TO_CONTIG_FD(mbuf, fd_arr, bp_info->bpid);
+ }
+ } else {
+ /* This is data-containing core mbuf: 'mi' */
+ mi = rte_mbuf_from_indirect(mbuf);
+ if (rte_mbuf_refcnt_read(mi) > 1) {
+ /* In case of indirect mbuf, and mbuf being cloned,
+ * BMAN should _not_ release it and let EAL release
+ * it through pktmbuf_free below.
+ */
+ DPAA_MBUF_TO_CONTIG_FD(mbuf, fd_arr, 0xff);
+ } else {
+ /* In case of indirect mbuf, and no cloning, core mbuf
+ * should be released by BMAN.
+ * Increate refcnt of core mbuf so that when
+ * pktmbuf_free is called and mbuf is released, EAL
+ * doesn't try to release core mbuf which would have
+ * been released by BMAN.
+ */
+ rte_mbuf_refcnt_update(mi, 1);
+ DPAA_MBUF_TO_CONTIG_FD(mbuf, fd_arr, bp_info->bpid);
+ }
+ rte_pktmbuf_free(mbuf);
+ }
+}
+
+/* Handle all mbufs on dpaa BMAN managed pool */
+static inline uint16_t
+tx_on_dpaa_pool(struct rte_mbuf *mbuf,
+ struct dpaa_bp_info *bp_info,
+ struct qm_fd *fd_arr)
+{
+ DPAA_TX_LOG(DEBUG, "BMAN offloaded buffer, mbuf: %p", mbuf);
+
+ if (mbuf->nb_segs == 1) {
+ /* Case for non-segmented buffers */
+ tx_on_dpaa_pool_unsegmented(mbuf, bp_info, fd_arr);
+ } else {
+ DPAA_PMD_DEBUG("Number of Segments not supported");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Handle all mbufs on an external pool (non-dpaa2) */
+static inline uint16_t
+tx_on_external_pool(struct qman_fq *txq, struct rte_mbuf *mbuf,
+ struct qm_fd *fd_arr)
+{
+ struct dpaa_if *dpaa_intf = txq->dpaa_intf;
+ struct rte_mbuf *dmable_mbuf;
+
+ DPAA_TX_LOG(DEBUG, "Non-BMAN offloaded buffer."
+ "Allocating an offloaded buffer");
+ dmable_mbuf = dpaa_get_dmable_mbuf(mbuf, dpaa_intf);
+ if (!dmable_mbuf) {
+ DPAA_TX_LOG(DEBUG, "no dpaa buffers.");
+ return 1;
+ }
+
+ DPAA_MBUF_TO_CONTIG_FD(mbuf, fd_arr, dpaa_intf->bp_info->bpid);
+
+ return 0;
+}
+
+uint16_t
+dpaa_eth_queue_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
+{
+ struct rte_mbuf *mbuf, *mi = NULL;
+ struct rte_mempool *mp;
+ struct dpaa_bp_info *bp_info;
+ struct qm_fd fd_arr[MAX_TX_RING_SLOTS];
+ uint32_t frames_to_send, loop, i = 0;
+ uint16_t state;
+ int ret;
+
+ ret = rte_dpaa_portal_init((void *)0);
+ if (ret) {
+ DPAA_PMD_ERR("Failure in affining portal");
+ return 0;
+ }
+
+ DPAA_TX_LOG(DEBUG, "Transmitting %d buffers on queue: %p", nb_bufs, q);
+
+ while (nb_bufs) {
+ frames_to_send = (nb_bufs >> 3) ? MAX_TX_RING_SLOTS : nb_bufs;
+ for (loop = 0; loop < frames_to_send; loop++, i++) {
+ mbuf = bufs[i];
+ if (RTE_MBUF_DIRECT(mbuf)) {
+ mp = mbuf->pool;
+ } else {
+ mi = rte_mbuf_from_indirect(mbuf);
+ mp = mi->pool;
+ }
+
+ bp_info = DPAA_MEMPOOL_TO_POOL_INFO(mp);
+ if (likely(mp->ops_index == bp_info->dpaa_ops_index)) {
+ state = tx_on_dpaa_pool(mbuf, bp_info,
+ &fd_arr[loop]);
+ if (unlikely(state)) {
+ /* Set frames_to_send & nb_bufs so
+ * that packets are transmitted till
+ * previous frame.
+ */
+ frames_to_send = loop;
+ nb_bufs = loop;
+ goto send_pkts;
+ }
+ } else {
+ state = tx_on_external_pool(q, mbuf,
+ &fd_arr[loop]);
+ if (unlikely(state)) {
+ /* Set frames_to_send & nb_bufs so
+ * that packets are transmitted till
+ * previous frame.
+ */
+ frames_to_send = loop;
+ nb_bufs = loop;
+ goto send_pkts;
+ }
+ }
+ }
+
+send_pkts:
+ loop = 0;
+ while (loop < frames_to_send) {
+ loop += qman_enqueue_multi(q, &fd_arr[loop],
+ frames_to_send - loop);
+ }
+ nb_bufs -= frames_to_send;
+ }
+
+ DPAA_TX_LOG(DEBUG, "Transmitted %d buffers on queue: %p", i, q);
+
+ return i;
+}
+
+uint16_t dpaa_eth_tx_drop_all(void *q __rte_unused,
+ struct rte_mbuf **bufs __rte_unused,
+ uint16_t nb_bufs __rte_unused)
+{
+ DPAA_TX_LOG(DEBUG, "Drop all packets");
+
+ /* Drop all incoming packets. No need to free packets here
+ * because the rte_eth f/w frees up the packets through tx_buffer
+ * callback in case this functions returns count less than nb_bufs
+ */
+ return 0;
+}
diff --git a/drivers/net/dpaa/dpaa_rxtx.h b/drivers/net/dpaa/dpaa_rxtx.h
new file mode 100644
index 0000000..45bfae8
--- /dev/null
+++ b/drivers/net/dpaa/dpaa_rxtx.h
@@ -0,0 +1,61 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright 2017 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DPDK_RXTX_H__
+#define __DPDK_RXTX_H__
+
+/* internal offset from where IC is copied to packet buffer*/
+#define DEFAULT_ICIOF 32
+/* IC transfer size */
+#define DEFAULT_ICSZ 48
+
+/* IC offsets from buffer header address */
+#define DEFAULT_RX_ICEOF 16
+
+#define DPAA_MAX_DEQUEUE_NUM_FRAMES 63
+ /** <Maximum number of frames to be dequeued in a single rx call*/
+/* FD structure masks and offset */
+#define DPAA_FD_FORMAT_MASK 0xE0000000
+#define DPAA_FD_OFFSET_MASK 0x1FF00000
+#define DPAA_FD_LENGTH_MASK 0xFFFFF
+#define DPAA_FD_FORMAT_SHIFT 29
+#define DPAA_FD_OFFSET_SHIFT 20
+
+uint16_t dpaa_eth_queue_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs);
+
+uint16_t dpaa_eth_queue_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs);
+
+uint16_t dpaa_eth_tx_drop_all(void *q __rte_unused,
+ struct rte_mbuf **bufs __rte_unused,
+ uint16_t nb_bufs __rte_unused);
+#endif
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 9c5a171..7440848 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -185,6 +185,7 @@ endif # CONFIG_RTE_LIBRTE_DPAA2_PMD
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_PMD),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += -lrte_bus_dpaa
+_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += -lrte_mempool_dpaa
endif
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
--
2.9.3
next prev parent reply other threads:[~2017-09-09 11:11 UTC|newest]
Thread overview: 367+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 5:40 [dpdk-dev] [PATCH 00/38] Introduce NXP DPAA Bus, Mempool and PMD Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 01/38] eal: add support for 24 40 and 48 bit operations Shreyansh Jain
2017-06-16 8:57 ` Bruce Richardson
2017-06-16 9:21 ` Shreyansh Jain
2017-06-16 9:42 ` Thomas Monjalon
2017-06-16 10:34 ` Adrien Mazarguil
2017-06-19 11:00 ` Shreyansh Jain
2017-06-19 13:52 ` Wiles, Keith
2017-06-20 10:43 ` Hemant Agrawal
2017-06-20 14:34 ` Wiles, Keith
2017-06-21 8:17 ` Hemant Agrawal
2017-06-21 8:32 ` Bruce Richardson
2017-06-21 9:02 ` Adrien Mazarguil
2017-10-02 10:16 ` Avi Kivity
2017-06-16 5:40 ` [dpdk-dev] [PATCH 02/38] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 03/38] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 04/38] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 05/38] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 06/38] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 07/38] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 08/38] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 09/38] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 10/38] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 11/38] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 12/38] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 13/38] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 14/38] bus/dpaa: add support for FMAN frame queue lookup Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 15/38] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 16/38] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 17/38] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 18/38] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-06-28 15:51 ` Ferruh Yigit
2017-06-29 14:17 ` Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 19/38] mempool/dpaa: add support for NXP DPAA Mempool Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 20/38] maintainers: claim ownership of DPAA Mempool driver Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 21/38] drivers: enable compilation " Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 22/38] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-06-28 15:41 ` Ferruh Yigit
2017-06-29 14:29 ` Shreyansh Jain
2017-07-02 6:47 ` Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 23/38] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 24/38] net/dpaa: add support for Tx and Rx queue setup Shreyansh Jain
2017-06-28 15:45 ` Ferruh Yigit
2017-06-29 14:55 ` Shreyansh Jain
2017-06-29 15:41 ` Ferruh Yigit
2017-06-30 11:48 ` Shreyansh Jain
2017-07-04 14:50 ` Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 25/38] net/dpaa: add support for MTU update Shreyansh Jain
2017-06-28 15:45 ` Ferruh Yigit
2017-06-29 14:56 ` Shreyansh Jain
2017-06-29 15:43 ` Ferruh Yigit
2017-06-16 5:40 ` [dpdk-dev] [PATCH 26/38] net/dpaa: add support for jumbo frames Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 27/38] net/dpaa: add support for link status update Shreyansh Jain
2017-06-28 15:46 ` Ferruh Yigit
2017-06-29 14:57 ` Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 28/38] net/dpaa: add support for device info Shreyansh Jain
2017-06-16 5:40 ` [dpdk-dev] [PATCH 29/38] net/dpaa: add support for promiscuous toggle Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 30/38] net/dpaa: add support for multicast toggle Shreyansh Jain
2017-06-28 15:47 ` Ferruh Yigit
2017-06-29 14:58 ` Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 31/38] net/dpaa: add support for basic stats Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 32/38] net/dpaa: add support for MAC address update Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 33/38] net/dpaa: add support for flow control Shreyansh Jain
2017-06-28 15:47 ` Ferruh Yigit
2017-06-30 9:37 ` Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 34/38] net/dpaa: add support for hashed RSS Shreyansh Jain
2017-06-28 15:48 ` Ferruh Yigit
2017-06-30 10:31 ` Shreyansh Jain
2017-06-30 11:39 ` Ferruh Yigit
2017-07-04 14:49 ` Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 35/38] net/dpaa: add support for packet type parsing Shreyansh Jain
2017-06-28 15:50 ` Ferruh Yigit
2017-06-30 11:40 ` Shreyansh Jain
2017-07-04 12:11 ` Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 36/38] net/dpaa: add support for checksum offload Shreyansh Jain
2017-06-28 15:50 ` Ferruh Yigit
2017-07-04 14:48 ` Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 37/38] net/dpaa: add support for Scattered Rx Shreyansh Jain
2017-06-16 5:41 ` [dpdk-dev] [PATCH 38/38] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-06-28 15:51 ` Ferruh Yigit
2017-06-30 11:47 ` Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 00/40] Introduce NXP DPAA Bus, Mempool and PMD Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 01/40] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 02/40] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 03/40] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 04/40] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 05/40] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 06/40] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 07/40] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-07-04 14:43 ` [dpdk-dev] [PATCH v2 08/40] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 09/40] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 10/40] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 11/40] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 12/40] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 13/40] bus/dpaa: add support for FMAN frame queue lookup Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 14/40] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 15/40] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 16/40] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 17/40] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 18/40] bus/dpaa: add DPAA mempool logging macros Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 19/40] mempool/dpaa: add support for NXP DPAA Mempool Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 20/40] drivers: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 21/40] maintainers: claim ownership " Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 22/40] bus/dpaa: add DPAA PMD logging macros Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 23/40] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 24/40] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 25/40] net/dpaa: add support for Tx and Rx queue setup Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 26/40] net/dpaa: add support for MTU update Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 27/40] net/dpaa: add support for jumbo frames Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 28/40] net/dpaa: add support for link status update Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 29/40] net/dpaa: add support for device info and speed capability Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 30/40] net/dpaa: add support for promiscuous toggle Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 31/40] net/dpaa: add support for multicast toggle Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 32/40] net/dpaa: add support for MAC address update Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 33/40] net/dpaa: add support for basic stats Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 34/40] net/dpaa: add support for flow control Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 35/40] net/dpaa: add support for hashed RSS Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 36/40] net/dpaa: add support for packet type parsing Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 37/40] net/dpaa: add support for checksum offload Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 38/40] net/dpaa: add support for Scattered Rx Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 39/40] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-07-04 14:44 ` [dpdk-dev] [PATCH v2 40/40] net/dpaa: support for firmware version get API Shreyansh Jain
2017-07-05 0:13 ` [dpdk-dev] [PATCH v2 00/40] Introduce NXP DPAA Bus, Mempool and PMD Thomas Monjalon
2017-07-05 4:38 ` Shreyansh Jain
2017-07-05 6:28 ` Thomas Monjalon
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 " Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 01/40] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 02/40] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 03/40] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 04/40] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 05/40] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 06/40] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 07/40] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 08/40] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 09/40] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 10/40] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 11/40] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 12/40] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 13/40] bus/dpaa: add support for FMAN frame queue lookup Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 14/40] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 15/40] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 16/40] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 17/40] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 18/40] bus/dpaa: add DPAA mempool logging macros Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 19/40] mempool/dpaa: add support for NXP DPAA Mempool Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 20/40] drivers: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-09-21 21:55 ` Thomas Monjalon
2017-09-22 6:35 ` Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 21/40] maintainers: claim ownership " Shreyansh Jain
2017-09-21 21:56 ` Thomas Monjalon
2017-09-22 6:47 ` Shreyansh Jain
2017-09-22 6:53 ` Thomas Monjalon
2017-09-22 7:37 ` Shreyansh Jain
2017-09-22 7:35 ` Thomas Monjalon
2017-09-27 8:30 ` Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 22/40] bus/dpaa: add DPAA PMD logging macros Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 23/40] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 24/40] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-09-21 22:03 ` Thomas Monjalon
2017-09-22 6:51 ` Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 25/40] net/dpaa: add support for Tx and Rx queue setup Shreyansh Jain
2017-08-23 14:11 ` [dpdk-dev] [PATCH v3 26/40] net/dpaa: add support for MTU update Shreyansh Jain
2017-09-21 22:07 ` Thomas Monjalon
2017-09-22 6:48 ` Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 27/40] net/dpaa: add support for jumbo frames Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 28/40] net/dpaa: add support for link status update Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 29/40] net/dpaa: add support for device info and speed capability Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 30/40] net/dpaa: add support for promiscuous toggle Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 31/40] net/dpaa: add support for multicast toggle Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 32/40] net/dpaa: add support for MAC address update Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 33/40] net/dpaa: add support for basic stats Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 34/40] net/dpaa: add support for flow control Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 35/40] net/dpaa: add support for hashed RSS Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 36/40] net/dpaa: add support for packet type parsing Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 37/40] net/dpaa: add support for checksum offload Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 38/40] net/dpaa: add support for Scattered Rx Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 39/40] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-08-23 14:12 ` [dpdk-dev] [PATCH v3 40/40] net/dpaa: support for firmware version get API Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 00/41] Introduce NXP DPAA Bus, Mempool and PMD Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 01/41] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 02/41] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-09-18 14:47 ` Ferruh Yigit
2017-09-19 13:14 ` Shreyansh Jain
2017-09-19 13:33 ` Ferruh Yigit
2017-09-25 14:32 ` Shreyansh Jain
2017-09-25 15:11 ` Ferruh Yigit
2017-09-26 11:26 ` Shreyansh Jain
2017-09-27 9:30 ` Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 03/41] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-09-18 14:49 ` Ferruh Yigit
2017-09-19 13:18 ` Shreyansh Jain
2017-09-19 13:40 ` Ferruh Yigit
2017-09-19 13:57 ` Shreyansh Jain
2017-09-26 12:43 ` Shreyansh Jain
2017-09-27 23:09 ` Ferruh Yigit
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 04/41] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-09-18 14:49 ` Ferruh Yigit
2017-09-19 13:37 ` Shreyansh Jain
2017-09-19 14:15 ` Ferruh Yigit
2017-09-19 20:01 ` Thomas Monjalon
2017-09-20 20:39 ` Jan Viktorin
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 05/41] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-09-18 14:50 ` Ferruh Yigit
2017-09-18 16:15 ` Thomas Monjalon
2017-09-18 17:12 ` Hemant Agrawal
2017-09-19 13:43 ` Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 06/41] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 07/41] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-09-18 14:51 ` Ferruh Yigit
2017-09-19 14:17 ` Shreyansh Jain
2017-09-09 11:20 ` [dpdk-dev] [PATCH v4 08/41] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 09/41] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 10/41] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 11/41] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-09-18 14:53 ` Ferruh Yigit
2017-09-19 14:18 ` Shreyansh Jain
2017-09-28 11:45 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 12/41] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 13/41] bus/dpaa: add support for FMAN frame queue lookup Shreyansh Jain
2017-09-18 14:51 ` Ferruh Yigit
2017-09-28 11:47 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 14/41] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 15/41] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 16/41] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 17/41] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-09-18 14:53 ` Ferruh Yigit
2017-09-19 14:25 ` Shreyansh Jain
2017-09-28 11:49 ` Shreyansh Jain
2017-09-18 18:33 ` Mcnamara, John
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 18/41] bus/dpaa: add DPAA mempool logging macros Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 19/41] mempool/dpaa: add support for NXP DPAA Mempool Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 20/41] drivers: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 21/41] maintainers: claim ownership " Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 22/41] bus/dpaa: add DPAA PMD logging macros Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 23/41] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 24/41] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-09-09 11:21 ` Shreyansh Jain [this message]
2017-09-18 14:55 ` [dpdk-dev] [PATCH v4 25/41] net/dpaa: add support for Tx and Rx queue setup Ferruh Yigit
2017-09-21 12:59 ` Shreyansh Jain
2017-09-28 11:51 ` Shreyansh Jain
2017-09-18 14:55 ` Ferruh Yigit
2017-09-21 13:00 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 26/41] net/dpaa: add support for MTU update Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 27/41] net/dpaa: add support for jumbo frames Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 28/41] net/dpaa: add support for link status update Shreyansh Jain
2017-09-18 14:56 ` Ferruh Yigit
2017-09-21 13:09 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 29/41] net/dpaa: add support for device info and speed capability Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 30/41] net/dpaa: add support for promiscuous toggle Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 31/41] net/dpaa: add support for multicast toggle Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 32/41] net/dpaa: add support for MAC address update Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 33/41] net/dpaa: add support for basic stats Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 34/41] net/dpaa: add support for flow control Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 35/41] net/dpaa: add support for hashed RSS Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 36/41] net/dpaa: add support for packet type parsing Shreyansh Jain
2017-09-18 14:56 ` Ferruh Yigit
2017-09-21 13:16 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 37/41] net/dpaa: add support for checksum offload Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 38/41] net/dpaa: add support for Scattered Rx Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 39/41] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 40/41] net/dpaa: support for firmware version get API Shreyansh Jain
2017-09-18 14:57 ` Ferruh Yigit
2017-09-21 13:18 ` Shreyansh Jain
2017-09-09 11:21 ` [dpdk-dev] [PATCH v4 41/41] net/dpaa: support for extended statistics Shreyansh Jain
2017-09-18 14:57 ` Ferruh Yigit
2017-09-21 13:26 ` Shreyansh Jain
2017-09-27 8:26 ` Shreyansh Jain
2017-09-27 23:37 ` Ferruh Yigit
2017-09-28 2:30 ` Shreyansh Jain
2017-09-28 2:52 ` Shreyansh Jain
2017-09-28 9:26 ` Ferruh Yigit
2017-09-21 22:09 ` [dpdk-dev] [PATCH v4 00/41] Introduce NXP DPAA Bus, Mempool and PMD Thomas Monjalon
2017-09-21 22:10 ` Thomas Monjalon
2017-09-22 6:25 ` Shreyansh Jain
2017-09-22 6:33 ` Thomas Monjalon
2017-09-22 13:06 ` Shreyansh Jain
2017-09-22 13:13 ` Thomas Monjalon
2017-09-22 14:00 ` Shreyansh Jain
2017-09-22 14:19 ` Thomas Monjalon
2017-09-23 10:39 ` Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 00/40] " Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 01/40] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 02/40] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 03/40] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 04/40] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 05/40] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 06/40] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 07/40] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 08/40] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 09/40] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 10/40] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 11/40] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 12/40] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 13/40] bus/dpaa: support FMAN frame queue lookup Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 14/40] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 15/40] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 16/40] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 17/40] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 18/40] bus/dpaa: add DPAA mempool logging macros Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 19/40] mempool/dpaa: support NXP DPAA Mempool Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 20/40] config: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 21/40] bus/dpaa: add DPAA PMD logging macros Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 22/40] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 23/40] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 24/40] net/dpaa: support Tx and Rx queue setup Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 25/40] net/dpaa: support MTU update Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 26/40] net/dpaa: support jumbo frames Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 27/40] net/dpaa: support link status update Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 28/40] net/dpaa: support device info and speed capability Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 29/40] net/dpaa: support promiscuous toggle Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 30/40] net/dpaa: support multicast toggle Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 31/40] net/dpaa: support MAC address update Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 32/40] net/dpaa: support basic stats Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 33/40] net/dpaa: support flow control Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 34/40] net/dpaa: support hashed RSS Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 35/40] net/dpaa: support packet type parsing Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 36/40] net/dpaa: support checksum offload Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 37/40] net/dpaa: support Scattered Rx Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 38/40] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 39/40] net/dpaa: support firmware version get API Shreyansh Jain
2017-09-28 11:33 ` [dpdk-dev] [PATCH v5 40/40] net/dpaa: support extended statistics Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 00/40] Introduce NXP DPAA Bus, Mempool and PMD Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 01/40] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 02/40] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 03/40] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 04/40] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 05/40] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 06/40] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 07/40] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 08/40] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 09/40] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 10/40] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 11/40] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 12/40] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 13/40] bus/dpaa: support FMAN frame queue lookup Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 14/40] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 15/40] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 16/40] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 17/40] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 18/40] bus/dpaa: add DPAA mempool logging macros Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 19/40] mempool/dpaa: support NXP DPAA Mempool Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 20/40] config: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 21/40] bus/dpaa: add DPAA PMD logging macros Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 22/40] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 23/40] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 24/40] net/dpaa: support Tx and Rx queue setup Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 25/40] net/dpaa: support MTU update Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 26/40] net/dpaa: support jumbo frames Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 27/40] net/dpaa: support link status update Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 28/40] net/dpaa: support device info and speed capability Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 29/40] net/dpaa: support promiscuous toggle Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 30/40] net/dpaa: support multicast toggle Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 31/40] net/dpaa: support MAC address update Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 32/40] net/dpaa: support basic stats Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 33/40] net/dpaa: support flow control Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 34/40] net/dpaa: support hashed RSS Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 35/40] net/dpaa: support packet type parsing Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 36/40] net/dpaa: support checksum offload Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 37/40] net/dpaa: support Scattered Rx Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 38/40] net/dpaa: add packet dump for debugging Shreyansh Jain
2017-09-28 12:29 ` [dpdk-dev] [PATCH v6 39/40] net/dpaa: support firmware version get API Shreyansh Jain
2017-09-28 12:30 ` [dpdk-dev] [PATCH v6 40/40] net/dpaa: support extended statistics Shreyansh Jain
2017-09-28 14:10 ` [dpdk-dev] [PATCH 1/2] bus/dpaa: fix incorrect ccsr mem allocation Shreyansh Jain
2017-09-28 14:10 ` [dpdk-dev] [PATCH 2/2] config: fix DPAA PMD linking Shreyansh Jain
2017-09-28 14:12 ` [dpdk-dev] [PATCH 1/2] bus/dpaa: fix incorrect ccsr mem allocation Shreyansh Jain
2017-10-02 23:05 ` Ferruh Yigit
2017-10-02 23:05 ` [dpdk-dev] [PATCH v6 00/40] Introduce NXP DPAA Bus, Mempool and PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170909112132.13936-26-shreyansh.jain@nxp.com \
--to=shreyansh.jain@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).