From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: "Eads, Gage" <gage.eads@intel.com>
Cc: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Vangati, Narender" <narender.vangati@intel.com>,
"Rao, Nikhil" <nikhil.rao@intel.com>,
"hemant.agrawal@nxp.com" <hemant.agrawal@nxp.com>,
"Doherty, Declan" <declan.doherty@intel.com>,
"nidadavolu.murthy@cavium.com" <nidadavolu.murthy@cavium.com>,
"nithin.dabilpuram@cavium.com" <nithin.dabilpuram@cavium.com>,
"narayanaprasad.athreya@cavium.com"
<narayanaprasad.athreya@cavium.com>
Subject: Re: [dpdk-dev] [RFC] eventdev: add crypto adapter API header
Date: Tue, 19 Dec 2017 14:17:43 +0530 [thread overview]
Message-ID: <20171219084742.GB19364@jerin> (raw)
In-Reply-To: <9184057F7FC11744A2107296B6B8EB1E2BB29E9A@FMSMSX108.amr.corp.intel.com>
-----Original Message-----
> Date: Mon, 18 Dec 2017 16:33:53 +0000
> From: "Eads, Gage" <gage.eads@intel.com>
> To: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> CC: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>, "dev@dpdk.org"
> <dev@dpdk.org>, "Vangati, Narender" <narender.vangati@intel.com>, "Rao,
> Nikhil" <nikhil.rao@intel.com>, "hemant.agrawal@nxp.com"
> <hemant.agrawal@nxp.com>, "Doherty, Declan" <declan.doherty@intel.com>,
> "nidadavolu.murthy@cavium.com" <nidadavolu.murthy@cavium.com>,
> "nithin.dabilpuram@cavium.com" <nithin.dabilpuram@cavium.com>,
> "narayanaprasad.athreya@cavium.com" <narayanaprasad.athreya@cavium.com>
> Subject: RE: [RFC] eventdev: add crypto adapter API header
>
>
>
> > -----Original Message-----
> > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > Sent: Monday, December 18, 2017 12:30 AM
> > To: Eads, Gage <gage.eads@intel.com>
> > Cc: Gujjar, Abhinandan S <abhinandan.gujjar@intel.com>; dev@dpdk.org;
> > Vangati, Narender <narender.vangati@intel.com>; Rao, Nikhil
> > <nikhil.rao@intel.com>; hemant.agrawal@nxp.com; Doherty, Declan
> > <declan.doherty@intel.com>; nidadavolu.murthy@cavium.com;
> > nithin.dabilpuram@cavium.com; narayanaprasad.athreya@cavium.com
> > Subject: Re: [RFC] eventdev: add crypto adapter API header
> >
> > -----Original Message-----
> > > Date: Thu, 14 Dec 2017 18:52:02 +0000
> > > From: "Eads, Gage" <gage.eads@intel.com>
> > > To: Jerin Jacob <jerin.jacob@caviumnetworks.com>
> > > CC: "Gujjar, Abhinandan S" <abhinandan.gujjar@intel.com>, "dev@dpdk.org"
> > > <dev@dpdk.org>, "Vangati, Narender" <narender.vangati@intel.com>,
> > > "Rao, Nikhil" <nikhil.rao@intel.com>, "hemant.agrawal@nxp.com"
> > > <hemant.agrawal@nxp.com>, "Doherty, Declan"
> > > <declan.doherty@intel.com>, "nidadavolu.murthy@cavium.com"
> > > <nidadavolu.murthy@cavium.com>, "nithin.dabilpuram@cavium.com"
> > > <nithin.dabilpuram@cavium.com>, "narayanaprasad.athreya@cavium.com"
> > > <narayanaprasad.athreya@cavium.com>
> > > Subject: RE: [RFC] eventdev: add crypto adapter API header
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Jerin Jacob [mailto:jerin.jacob@caviumnetworks.com]
> > > > Sent: Wednesday, December 13, 2017 8:49 PM
> > > > To: Eads, Gage <gage.eads@intel.com>
> > > > Cc: Gujjar, Abhinandan S <abhinandan.gujjar@intel.com>;
> > > > dev@dpdk.org; Vangati, Narender <narender.vangati@intel.com>; Rao,
> > > > Nikhil <nikhil.rao@intel.com>; hemant.agrawal@nxp.com; Doherty,
> > > > Declan <declan.doherty@intel.com>; nidadavolu.murthy@cavium.com;
> > > > nithin.dabilpuram@cavium.com; narayanaprasad.athreya@cavium.com
> > > > Subject: Re: [RFC] eventdev: add crypto adapter API header
> > > >
> > > > -----Original Message-----
> > > > > Date: Wed, 13 Dec 2017 23:35:48 +0000
> > > > > From: "Eads, Gage" <gage.eads@intel.com>
> > > > > To: Jerin Jacob <jerin.jacob@caviumnetworks.com>, "Gujjar, Abhinandan
> > S"
> > > > > <abhinandan.gujjar@intel.com>
> > > > > CC: "dev@dpdk.org" <dev@dpdk.org>, "Vangati, Narender"
> > > > > <narender.vangati@intel.com>, "Rao, Nikhil"
> > > > > <nikhil.rao@intel.com>, "hemant.agrawal@nxp.com"
> > <hemant.agrawal@nxp.com>, "Doherty, Declan"
> > > > > <declan.doherty@intel.com>, "nidadavolu.murthy@cavium.com"
> > > > > <nidadavolu.murthy@cavium.com>, "nithin.dabilpuram@cavium.com"
> > > > > <nithin.dabilpuram@cavium.com>,
> > "narayanaprasad.athreya@cavium.com"
> > > > > <narayanaprasad.athreya@cavium.com>
> > > > > Subject: RE: [RFC] eventdev: add crypto adapter API header
> > > > >
> > > > > Hey Jerin,
> > > >
> > > > Hey Gage,
> > > >
> > > > >
> > > > > </snip>
> > > > >
> > > > > > > +
> > > > > > > + /**
> > > > > > > + * @warning
> > > > > > > + * @b EXPERIMENTAL: this enum may change without prior notice
> > > > > > > + *
> > > > > > > + * Crypto event adapter type
> > > > > > > + */
> > > > > > > +enum rte_event_crypto_adapter_type {
> > > > > > > + RTE_EVENT_CRYPTO_ADAPTER_RX_ONLY = 1,
> > > > > > > + /**< Start only Rx part of crypto adapter.
> > > > > > > + * Packets dequeued from cryptodev are new to eventdev and
> > > > > > > + * events will be treated as RTE_EVENT_OP_NEW */
> > > > > > > + RTE_EVENT_CRYPTO_ADAPTER_RX_TX,
> > > > > > > + /**< Start both Rx & Tx part of crypto adapter.
> > > > > > > + * Packet's event context will be retained and
> > > > > > > + * event will be treated as RTE_EVENT_OP_FORWARD */ };
> > > > > >
> > > > > > How about leveraging ev.op based schematics as mentioned above?
> > > > >
> > > > > That could work, but perhaps the ev.op should be configured once
> > > > > up front, as
> > > > I see it being a function of the application architecture. A couple
> > > > possible designs, for example:
> > > > > - Worker enqueues into cryptodev, adapter polls for response: the
> > > > > adapter
> > > > port would always use OP_NEW here.
> > > > > - Worker sends a crypto request event to the adapter, which gives
> > > > > the request to the cryptodev and polls for response: the adapter
> > > > > port would always use OP_FWD here. (This ties in with my implicit
> > > > > release patch
> > > > > (http://dpdk.org/ml/archives/dev/2017-December/083535.html))
> > > > > - Etc.
> > > >
> > > > Yes. Semantically both approaches will work. I was trying to avoid
> > > > extra clutter(enum rte_event_crypto_adapter_type) in adapter API.
> > > > I don't see any problem in moving ev.op to adapter configuration
> > > > time if it helps the SW driver.
> > > >
> > > > IMO, We can change RTE_EVENT_CRYPTO_ADAPTER_RX_ONLY and
> > > > RTE_EVENT_CRYPTO_ADAPTER_RX_TX to more appropriate name,
> > something
> > > > like,
> > RTE_EVENT_CRYPTO_ADAPTER_TYPE_OP_NEW/RTE_EVENT_CRYPTO_ADAPTE
> > > > R_TYPE_OP_FWD
> > > > or something like that.
> > > >
> > >
> > > I agree that the two naming schemes are equivalent, but since this option
> > would control the adapter's behavior (Rx only vs. Rx + Tx), (IMO) I think
> > Abhinandan's original names do a better job of conveying what effect these two
> > options have on the adapter, compared to the op type names.
> >
> > The only concern with Rx/Tx terminology was, It is mostly used in the ethdev
> > domain.
> > In crypto domain, typically, we use enqueue/dequeue.
> > The only difference between two modes is if adapter enqueue the events with
> > RTE_EVENT_OP_NEW vs RTE_EVENT_OP_FORWARD then (IMO) we can change
> > something related to that name to avoid adding a new terminology.
> >
>
> Oh, sure -- enqueue/dequeue makes sense here. I'd still prefer DEQ_ONLY or DEQ_ENQ, but the event_op names work just as well.
I prefer event_op name but enqueue/dequeue name work as well.
>
> Speaking of the crypto domain, the cryptodev enqueue and dequeue operations both take crypto op pointers. The original RFC had the request event pointing to an mbuf (which had a crypto_op pointer in its private metadata), but with the suggested opaque eventdev metadata changes it makes more sense for the request event to point to a crypto op. And the RFC didn't specify what the response event would point to (mbuf or crypto op), but to match the cryptodev dequeue operation then a crypto op makes sense. Will this work with your hardware?
Yes. crypto op will work with Cavium HW. NXP guys can comment on their HW.
We are treating rte_event.event_ptr as opaque event pointer so it can carry
crypto_op or mbuf pointer.I think, For crypto operation, rte_crypto_op make sense as it has "status" etc.
May be for inline ipsec, mbuf would make sense. So I think, we can support both options by
reserving size of struct rte_event as eventdev metadata in crypto area.
>
> > BTW, Based on the earlier discussion, if we need to add opaque eventdev
> > metadata to cryptodev then it may change ABI.If so, I think, we need to
> > announce ABI change notice for cryptodev and plan cryptodev adapter for
> > v18.05.
>
> Personally I'd prefer to get this right/agreed-upon the first time around -- even if that means breaking ABI and pushing this adapter out to 18.05.
I agree and that makes sense too.
prev parent reply other threads:[~2017-12-19 8:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-09 6:54 Abhinandan Gujjar
2017-11-29 11:41 ` Jerin Jacob
2017-12-13 11:03 ` Doherty, Declan
2017-12-13 11:26 ` Jerin Jacob
2017-12-13 12:28 ` Nithin Dabilpuram
2017-12-13 14:29 ` Akhil Goyal
2017-12-13 14:22 ` Akhil Goyal
2017-12-13 17:37 ` Jerin Jacob
2017-12-13 23:35 ` Eads, Gage
2017-12-14 2:49 ` Jerin Jacob
2017-12-14 18:52 ` Eads, Gage
2017-12-18 6:30 ` Jerin Jacob
2017-12-18 16:33 ` Eads, Gage
2017-12-19 8:47 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219084742.GB19364@jerin \
--to=jerin.jacob@caviumnetworks.com \
--cc=abhinandan.gujjar@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=narayanaprasad.athreya@cavium.com \
--cc=narender.vangati@intel.com \
--cc=nidadavolu.murthy@cavium.com \
--cc=nikhil.rao@intel.com \
--cc=nithin.dabilpuram@cavium.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).