patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Olivier Matz <olivier.matz@6wind.com>
To: "Yao, Lei A" <lei.a.yao@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"yliu@fridaylinux.org" <yliu@fridaylinux.org>,
	"maxime.coquelin@redhat.com" <maxime.coquelin@redhat.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-stable] [dpdk-dev] [PATCH v2 06/10] net/virtio: fix queue setup consistency
Date: Thu, 1 Feb 2018 09:27:35 +0100	[thread overview]
Message-ID: <20180201082735.w4nyppsg4vpgenei@platinum> (raw)
In-Reply-To: <2DBBFF226F7CF64BAFCA79B681719D953A354152@shsmsx102.ccr.corp.intel.com>

Hi Lei,

It's on my todo list, I'll check this as soon as possible.

Olivier


On Thu, Feb 01, 2018 at 03:14:15AM +0000, Yao, Lei A wrote:
> Hi, Olivier
> 
> This is Lei from DPDK validation team in Intel. During our DPDK 18.02-rc1 test,
> I find the following patch will cause one serious issue with virtio vector path: 
> the traffic can't resume after stop/start the virtio device. 
> 
> The step like following:
> 1. Launch vhost-user port using testpmd at Host 
> 2. Launch VM with virtio device, mergeable is off
> 3. Bind the virtio device to pmd driver, launch testpmd, let the tx/rx use vector path
>     virtio_xmit_pkts_simple 
>     virtio_recv_pkts_vec     
> 4. Send traffic to virtio device from vhost side, then stop the virtio device
> 5. Start the virtio device again
> After step 5, the traffic can't resume. 
> 
> Could you help check this and give a fix? This issue will impact the virtio pmd user 
> experience heavily. By the way, this patch is already included into V17.11. Looks like
> we need give a patch to this LTS version.  Thanks a lot!
> 
> BRs
> Lei
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Olivier Matz
> > Sent: Thursday, September 7, 2017 8:14 PM
> > To: dev@dpdk.org; yliu@fridaylinux.org; maxime.coquelin@redhat.com
> > Cc: stephen@networkplumber.org; stable@dpdk.org
> > Subject: [dpdk-dev] [PATCH v2 06/10] net/virtio: fix queue setup consistency
> > 
> > In rx/tx queue setup functions, some code is executed only if
> > use_simple_rxtx == 1. The value of this variable can change depending on
> > the offload flags or sse support. If Rx queue setup is called before Tx
> > queue setup, it can result in an invalid configuration:
> > 
> > - dev_configure is called: use_simple_rxtx is initialized to 0
> > - rx queue setup is called: queues are initialized without simple path
> >   support
> > - tx queue setup is called: use_simple_rxtx switch to 1, and simple
> >   Rx/Tx handlers are selected
> > 
> > Fix this by postponing a part of Rx/Tx queue initialization in
> > dev_start(), as it was the case in the initial implementation.
> > 
> > Fixes: 48cec290a3d2 ("net/virtio: move queue configure code to proper
> > place")
> > Cc: stable@dpdk.org
> > 
> > Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> > ---
> >  drivers/net/virtio/virtio_ethdev.c | 13 +++++++++++++
> >  drivers/net/virtio/virtio_ethdev.h |  6 ++++++
> >  drivers/net/virtio/virtio_rxtx.c   | 40 ++++++++++++++++++++++++++++++-
> > -------
> >  3 files changed, 51 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/net/virtio/virtio_ethdev.c
> > b/drivers/net/virtio/virtio_ethdev.c
> > index 8eee3ff80..c7888f103 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -1737,6 +1737,19 @@ virtio_dev_start(struct rte_eth_dev *dev)
> >  	struct virtnet_rx *rxvq;
> >  	struct virtnet_tx *txvq __rte_unused;
> >  	struct virtio_hw *hw = dev->data->dev_private;
> > +	int ret;
> > +
> > +	/* Finish the initialization of the queues */
> > +	for (i = 0; i < dev->data->nb_rx_queues; i++) {
> > +		ret = virtio_dev_rx_queue_setup_finish(dev, i);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +	for (i = 0; i < dev->data->nb_tx_queues; i++) {
> > +		ret = virtio_dev_tx_queue_setup_finish(dev, i);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > 
> >  	/* check if lsc interrupt feature is enabled */
> >  	if (dev->data->dev_conf.intr_conf.lsc) {
> > diff --git a/drivers/net/virtio/virtio_ethdev.h
> > b/drivers/net/virtio/virtio_ethdev.h
> > index c3413c6d9..2039bc547 100644
> > --- a/drivers/net/virtio/virtio_ethdev.h
> > +++ b/drivers/net/virtio/virtio_ethdev.h
> > @@ -92,10 +92,16 @@ int  virtio_dev_rx_queue_setup(struct rte_eth_dev
> > *dev, uint16_t rx_queue_id,
> >  		const struct rte_eth_rxconf *rx_conf,
> >  		struct rte_mempool *mb_pool);
> > 
> > +int virtio_dev_rx_queue_setup_finish(struct rte_eth_dev *dev,
> > +				uint16_t rx_queue_id);
> > +
> >  int  virtio_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t
> > tx_queue_id,
> >  		uint16_t nb_tx_desc, unsigned int socket_id,
> >  		const struct rte_eth_txconf *tx_conf);
> > 
> > +int virtio_dev_tx_queue_setup_finish(struct rte_eth_dev *dev,
> > +				uint16_t tx_queue_id);
> > +
> >  uint16_t virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> >  		uint16_t nb_pkts);
> > 
> > diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
> > index e30377c51..a32e3229f 100644
> > --- a/drivers/net/virtio/virtio_rxtx.c
> > +++ b/drivers/net/virtio/virtio_rxtx.c
> > @@ -421,9 +421,6 @@ virtio_dev_rx_queue_setup(struct rte_eth_dev *dev,
> >  	struct virtio_hw *hw = dev->data->dev_private;
> >  	struct virtqueue *vq = hw->vqs[vtpci_queue_idx];
> >  	struct virtnet_rx *rxvq;
> > -	int error, nbufs;
> > -	struct rte_mbuf *m;
> > -	uint16_t desc_idx;
> > 
> >  	PMD_INIT_FUNC_TRACE();
> > 
> > @@ -440,10 +437,24 @@ virtio_dev_rx_queue_setup(struct rte_eth_dev
> > *dev,
> >  	}
> >  	dev->data->rx_queues[queue_idx] = rxvq;
> > 
> > +	return 0;
> > +}
> > +
> > +int
> > +virtio_dev_rx_queue_setup_finish(struct rte_eth_dev *dev, uint16_t
> > queue_idx)
> > +{
> > +	uint16_t vtpci_queue_idx = 2 * queue_idx +
> > VTNET_SQ_RQ_QUEUE_IDX;
> > +	struct virtio_hw *hw = dev->data->dev_private;
> > +	struct virtqueue *vq = hw->vqs[vtpci_queue_idx];
> > +	struct virtnet_rx *rxvq = &vq->rxq;
> > +	struct rte_mbuf *m;
> > +	uint16_t desc_idx;
> > +	int error, nbufs;
> > +
> > +	PMD_INIT_FUNC_TRACE();
> > 
> >  	/* Allocate blank mbufs for the each rx descriptor */
> >  	nbufs = 0;
> > -	error = ENOSPC;
> > 
> >  	if (hw->use_simple_rxtx) {
> >  		for (desc_idx = 0; desc_idx < vq->vq_nentries;
> > @@ -534,7 +545,6 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
> >  	struct virtqueue *vq = hw->vqs[vtpci_queue_idx];
> >  	struct virtnet_tx *txvq;
> >  	uint16_t tx_free_thresh;
> > -	uint16_t desc_idx;
> > 
> >  	PMD_INIT_FUNC_TRACE();
> > 
> > @@ -563,9 +573,24 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev
> > *dev,
> > 
> >  	vq->vq_free_thresh = tx_free_thresh;
> > 
> > -	if (hw->use_simple_rxtx) {
> > -		uint16_t mid_idx  = vq->vq_nentries >> 1;
> > +	dev->data->tx_queues[queue_idx] = txvq;
> > +	return 0;
> > +}
> > +
> > +int
> > +virtio_dev_tx_queue_setup_finish(struct rte_eth_dev *dev,
> > +				uint16_t queue_idx)
> > +{
> > +	uint8_t vtpci_queue_idx = 2 * queue_idx +
> > VTNET_SQ_TQ_QUEUE_IDX;
> > +	struct virtio_hw *hw = dev->data->dev_private;
> > +	struct virtqueue *vq = hw->vqs[vtpci_queue_idx];
> > +	uint16_t mid_idx = vq->vq_nentries >> 1;
> > +	struct virtnet_tx *txvq = &vq->txq;
> > +	uint16_t desc_idx;
> > 
> > +	PMD_INIT_FUNC_TRACE();
> > +
> > +	if (hw->use_simple_rxtx) {
> >  		for (desc_idx = 0; desc_idx < mid_idx; desc_idx++) {
> >  			vq->vq_ring.avail->ring[desc_idx] =
> >  				desc_idx + mid_idx;
> > @@ -587,7 +612,6 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
> > 
> >  	VIRTQUEUE_DUMP(vq);
> > 
> > -	dev->data->tx_queues[queue_idx] = txvq;
> >  	return 0;
> >  }
> > 
> > --
> > 2.11.0
> 

  reply	other threads:[~2018-02-01  8:27 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20170831134015.1383-1-olivier.matz@6wind.com>
2017-08-31 13:40 ` [dpdk-stable] [PATCH 1/9] net/virtio: revert "do not claim to support LRO" Olivier Matz
2017-08-31 13:40 ` [dpdk-stable] [PATCH 2/9] net/virtio: revert "do not falsely claim to do IP checksum" Olivier Matz
2017-08-31 13:47   ` [dpdk-stable] [dpdk-dev] " Olivier MATZ
2017-08-31 13:40 ` [dpdk-stable] [PATCH 3/9] doc: fix description of L4 Rx checksum offload Olivier Matz
2017-08-31 13:40 ` [dpdk-stable] [PATCH 4/9] net/virtio: fix log levels in configure Olivier Matz
2017-08-31 13:40 ` [dpdk-stable] [PATCH 5/9] net/virtio: fix mbuf port for simple Rx function Olivier Matz
2017-08-31 13:48   ` [dpdk-stable] [dpdk-dev] " Olivier MATZ
2017-08-31 13:40 ` [dpdk-stable] [PATCH 6/9] net/virtio: fix queue setup consistency Olivier Matz
2017-08-31 13:49   ` [dpdk-stable] [dpdk-dev] " Olivier MATZ
2017-08-31 13:40 ` [dpdk-stable] [PATCH 7/9] net/virtio: rationalize setting of Rx/Tx handlers Olivier Matz
2017-09-01  9:19   ` Yuanhan Liu
2017-09-01  9:52     ` Olivier MATZ
2017-09-01 12:31       ` Yuanhan Liu
2017-09-06 14:40         ` Olivier MATZ
2017-09-07  8:13           ` Yuanhan Liu
2017-08-31 13:40 ` [dpdk-stable] [PATCH 8/9] net/virtio: keep Rx handler whatever the Tx queue config Olivier Matz
2017-08-31 13:50   ` [dpdk-stable] [dpdk-dev] " Olivier MATZ
2017-09-01  9:25   ` [dpdk-stable] " Yuanhan Liu
2017-09-01  9:58     ` Olivier MATZ
2017-09-01 12:22       ` Yuanhan Liu
2017-08-31 13:40 ` [dpdk-stable] [PATCH 9/9] net/virtio: fix Rx handler when checksum is requested Olivier Matz
2017-08-31 13:51   ` [dpdk-stable] [dpdk-dev] " Olivier MATZ
     [not found] ` <20170907121347.16208-1-olivier.matz@6wind.com>
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 01/10] net/virtio: revert "do not claim to support LRO" Olivier Matz
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 02/10] net/virtio: revert "do not falsely claim to do IP checksum" Olivier Matz
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 03/10] doc: fix description of L4 Rx checksum offload Olivier Matz
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 04/10] net/virtio: fix log levels in configure Olivier Matz
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 05/10] net/virtio: fix mbuf port for simple Rx function Olivier Matz
2017-09-07 12:13   ` [dpdk-stable] [PATCH v2 06/10] net/virtio: fix queue setup consistency Olivier Matz
2017-12-06  5:25     ` [dpdk-stable] [dpdk-dev] " Tiwei Bie
2017-12-07 14:14       ` Olivier MATZ
2017-12-08  2:17         ` Tiwei Bie
2018-02-01  3:14     ` Yao, Lei A
2018-02-01  8:27       ` Olivier Matz [this message]
2018-02-07  8:31         ` Xu, Qian Q
2018-02-07 22:01           ` Olivier Matz
2018-02-09  5:44             ` Wang, Zhihong
2018-02-09  8:59               ` Maxime Coquelin
2018-02-09  9:40                 ` Maxime Coquelin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180201082735.w4nyppsg4vpgenei@platinum \
    --to=olivier.matz@6wind.com \
    --cc=dev@dpdk.org \
    --cc=lei.a.yao@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=yliu@fridaylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).