From: Bruce Richardson <bruce.richardson@intel.com>
To: Hemant Agrawal <hemant.agrawal@nxp.com>
Cc: dev@dpdk.org, thomas@monjalon.net, shreyansh.jain@nxp.com,
Akhil Goyal <akhil.goyal@nxp.com>
Subject: Re: [dpdk-dev] [PATCH 7/7] build: add meson support for dpaaX platforms
Date: Wed, 28 Feb 2018 14:44:10 +0000 [thread overview]
Message-ID: <20180228144409.GA10572@bricha3-MOBL3.ger.corp.intel.com> (raw)
In-Reply-To: <1519752352-15442-8-git-send-email-hemant.agrawal@nxp.com>
On Tue, Feb 27, 2018 at 10:55:52PM +0530, Hemant Agrawal wrote:
> Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
Thanks for this. Some comments inline below.
/Bruce
> app/test-pmd/meson.build | 3 +++
> config/arm/arm64_dpaa2_linuxapp_gcc | 13 +++++++++++++
> config/arm/arm64_dpaa_linuxapp_gcc | 14 ++++++++++++++
> config/arm/meson.build | 13 +++++++++++++
> drivers/bus/dpaa/meson.build | 29 +++++++++++++++++++++++++++++
> drivers/bus/fslmc/meson.build | 28 ++++++++++++++++++++++++++++
> drivers/bus/meson.build | 4 ++--
> drivers/crypto/dpaa2_sec/meson.build | 16 ++++++++++++++++
> drivers/crypto/dpaa_sec/meson.build | 16 ++++++++++++++++
> drivers/crypto/meson.build | 3 +++
> drivers/event/dpaa/meson.build | 11 +++++++++++
> drivers/event/dpaa2/meson.build | 12 ++++++++++++
> drivers/event/meson.build | 2 +-
> drivers/mempool/dpaa/meson.build | 9 +++++++++
> drivers/mempool/dpaa2/meson.build | 9 +++++++++
> drivers/mempool/meson.build | 2 +-
> drivers/net/dpaa/meson.build | 15 +++++++++++++++
> drivers/net/dpaa2/meson.build | 16 ++++++++++++++++
> drivers/net/meson.build | 2 +-
> 19 files changed, 212 insertions(+), 5 deletions(-)
> create mode 100644 config/arm/arm64_dpaa2_linuxapp_gcc
> create mode 100644 config/arm/arm64_dpaa_linuxapp_gcc
> create mode 100644 drivers/bus/dpaa/meson.build
> create mode 100644 drivers/bus/fslmc/meson.build
> create mode 100644 drivers/crypto/dpaa2_sec/meson.build
> create mode 100644 drivers/crypto/dpaa_sec/meson.build
> create mode 100644 drivers/event/dpaa/meson.build
> create mode 100644 drivers/event/dpaa2/meson.build
> create mode 100644 drivers/mempool/dpaa/meson.build
> create mode 100644 drivers/mempool/dpaa2/meson.build
> create mode 100644 drivers/net/dpaa/meson.build
> create mode 100644 drivers/net/dpaa2/meson.build
>
> diff --git a/app/test-pmd/meson.build b/app/test-pmd/meson.build
> index 7ed74db..83f8bb1 100644
> --- a/app/test-pmd/meson.build
> +++ b/app/test-pmd/meson.build
> @@ -32,6 +32,9 @@ if dpdk_conf.has('RTE_LIBRTE_SOFTNIC_PMD')
> sources += files('tm.c')
> deps += 'pmd_softnic'
> endif
> +if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
> + deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa']
> +endif
>
> dep_objs = []
> foreach d:deps
> diff --git a/config/arm/arm64_dpaa2_linuxapp_gcc b/config/arm/arm64_dpaa2_linuxapp_gcc
> new file mode 100644
> index 0000000..87337fb
> --- /dev/null
> +++ b/config/arm/arm64_dpaa2_linuxapp_gcc
> @@ -0,0 +1,13 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +implementor_id = 'dpaa2'
> diff --git a/config/arm/arm64_dpaa_linuxapp_gcc b/config/arm/arm64_dpaa_linuxapp_gcc
> new file mode 100644
> index 0000000..f769435
> --- /dev/null
> +++ b/config/arm/arm64_dpaa_linuxapp_gcc
> @@ -0,0 +1,14 @@
> +[binaries]
> +c = 'aarch64-linux-gnu-gcc'
> +cpp = 'aarch64-linux-gnu-cpp'
> +ar = 'aarch64-linux-gnu-gcc-ar'
> +strip = 'aarch64-linux-gnu-strip'
> +
> +[host_machine]
> +system = 'linux'
> +cpu_family = 'aarch64'
> +cpu = 'armv8-a'
> +endian = 'little'
> +
> +[properties]
> +implementor_id = 'dpaa'
Maybe separate the cross-build files out into a separate patch, since
they are pretty independent of the rest of the changes.
> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index 4e788a4..c1ab6ed 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -54,6 +54,17 @@ flags_cavium = [
> ['RTE_MAX_LCORE', 96],
> ['RTE_MAX_VFIO_GROUPS', 128],
> ['RTE_RING_USE_C11_MEM_MODEL', false]]
> +flags_dpaa = [
> + ['RTE_MACHINE', '"dpaa"'],
> + ['RTE_CACHE_LINE_SIZE', 64],
> + ['RTE_MAX_NUMA_NODES', 1],
> + ['RTE_MAX_LCORE', 16]]
> +flags_dpaa2 = [
> + ['RTE_MACHINE', '"dpaa2"'],
> + ['RTE_CACHE_LINE_SIZE', 64],
> + ['RTE_MAX_NUMA_NODES', 1],
> + ['RTE_MAX_LCORE', 16],
> + ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', 'n']]
>
> ## Arm implementer ID (ARM DDI 0487C.a, Section G7.2.106, Page G7-5321)
> impl_generic = ['Generic armv8', flags_generic, machine_args_generic]
> @@ -69,6 +80,8 @@ impl_0x51 = ['Qualcomm', flags_generic, machine_args_generic]
> impl_0x53 = ['Samsung', flags_generic, machine_args_generic]
> impl_0x56 = ['Marvell', flags_generic, machine_args_generic]
> impl_0x69 = ['Intel', flags_generic, machine_args_generic]
> +impl_dpaa = ['NXP DPAA', flags_dpaa, machine_args_generic]
> +impl_dpaa2 = ['NXP DPAA2', flags_dpaa2, machine_args_generic]
>
>
> if cc.get_define('__clang__') != ''
> diff --git a/drivers/bus/dpaa/meson.build b/drivers/bus/dpaa/meson.build
> new file mode 100644
> index 0000000..c4257a5
> --- /dev/null
> +++ b/drivers/bus/dpaa/meson.build
> @@ -0,0 +1,29 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['pci', 'ethdev', 'eventdev']
> +sources = files('dpaa_bus.c',
> + 'base/fman/fman.c',
> + 'base/fman/fman_hw.c',
> + 'base/fman/of.c',
> + 'base/fman/netcfg_layer.c',
> + 'base/qbman/process.c',
> + 'base/qbman/bman.c',
> + 'base/qbman/bman_driver.c',
> + 'base/qbman/qman.c',
> + 'base/qbman/qman_driver.c',
> + 'base/qbman/dpaa_alloc.c',
> + 'base/qbman/dpaa_sys.c')
Minor nit - try to keep all files and list entries in alphabetical
order.
> +
> +allow_experimental_apis = true
> +
> +if cc.has_argument('-Wno-cast-qual')
> + cflags += '-Wno-cast-qual'
> +endif
> +
> +includes += include_directories('include', 'base/qbman')
> +cflags += ['-D_GNU_SOURCE']
> diff --git a/drivers/bus/fslmc/meson.build b/drivers/bus/fslmc/meson.build
> new file mode 100644
> index 0000000..87475ee
> --- /dev/null
> +++ b/drivers/bus/fslmc/meson.build
> @@ -0,0 +1,28 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['eal', 'ethdev', 'eventdev']
Another minor nit - eal isn't strictly necessary here as both ethdev and
eventdev already depend on it, and dependencies are recursive.
Explicitly calling out all dependencies is not wrong, but in previous
prototyping I found that meson takes a lot longer to run when it has to
sort through all the dependency chains. That's why in other libs and
drivers I tried to keep the dependency lists to a minimum.
As well as this, EAL is a standard dependency, so it's already in the
deps array at this point.
> +sources = files('qbman/qbman_portal.c',
> + 'qbman/qbman_debug.c',
> + 'mc/dpmng.c',
> + 'mc/dpbp.c',
> + 'mc/dpio.c',
> + 'mc/mc_sys.c',
> + 'mc/dpcon.c',
> + 'mc/dpci.c',
> + 'portal/dpaa2_hw_dpio.c',
> + 'portal/dpaa2_hw_dpbp.c',
> + 'portal/dpaa2_hw_dpci.c',
> + 'fslmc_vfio.c',
> + 'fslmc_bus.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('../../../lib/librte_eal/linuxapp/eal')
Is this not covered by the dependency on eal? Is it accessing things
directly in the EAL internals?
> +includes += include_directories('mc', 'qbman/include', 'portal')
> +dpdk_conf.set('CONFIG_RTE_ARCH_ARM_TUNE', 'cortex-a72')
This setting seems strange here? How is it used, and why set only inside
this particular driver?
> +cflags += ['-D_GNU_SOURCE']
> diff --git a/drivers/bus/meson.build b/drivers/bus/meson.build
> index c6af500..2187f6b 100644
> --- a/drivers/bus/meson.build
> +++ b/drivers/bus/meson.build
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: BSD-3-Clause
> # Copyright(c) 2017 Intel Corporation
>
> -drivers = ['pci', 'vdev']
> -std_deps = ['eal']
> +drivers = ['pci', 'vdev', 'fslmc', 'dpaa']
Please keep alphabetical order.
> +std_deps = ['eal', 'kvargs']
No big issue with this line change, but did you consider just making
kvargs a dependency of the fslmc and dpaa buses directly, rather than
making pci and vdev also depend on them?
> config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
> driver_name_fmt = 'rte_bus_@0@'
> diff --git a/drivers/crypto/dpaa2_sec/meson.build b/drivers/crypto/dpaa2_sec/meson.build
> new file mode 100644
> index 0000000..e80f15d
> --- /dev/null
> +++ b/drivers/crypto/dpaa2_sec/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['bus_fslmc', 'security', 'mempool_dpaa2']
> +sources = files('dpaa2_sec_dpseci.c',
> + 'mc/dpseci.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('mc', 'hw')
> +dpdk_conf.set('RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS', 2048)
I don't think this should be set here. For other libs and drivers, the
constants are placed directly in config/rte_config.h (or put into a
header file inside the driver itself).
> +ext_deps += dep
This line should be removed. You haven't assigned a dependency object to
a variable called "dep" anywhere in this file.
> diff --git a/drivers/crypto/dpaa_sec/meson.build b/drivers/crypto/dpaa_sec/meson.build
> new file mode 100644
> index 0000000..10a7dd3
> --- /dev/null
> +++ b/drivers/crypto/dpaa_sec/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['bus_dpaa', 'security']
> +sources = files('dpaa_sec.c')
> +
> +allow_experimental_apis = true
> +
> +includes += include_directories('../dpaa2_sec/')
> +dpdk_conf.set('RTE_LIBRTE_DPAA_MAX_CRYPTODEV', 4)
> +dpdk_conf.set('RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS', 2048)
As with other constants, I think this should go directly into
rte_config.h, or in a header file in the driver directly.
> +ext_deps += dep
Drop this line.
> diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
> index 17041ad..a08bce5 100644
> --- a/drivers/crypto/meson.build
> +++ b/drivers/crypto/meson.build
> @@ -2,6 +2,9 @@
> # Copyright(c) 2017 Intel Corporation
>
> drivers = ['qat', 'null', 'openssl']
> +
> + drivers += ['dpaa_sec', 'dpaa2_sec']
> +
Don't indent.
In other lists, we just allow list to flow onto multiple lines, rather
than using +=. Using += is not wrong, it's just inconsistent, and again
will break alphabetical ordering in this case.
> std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
> config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
> driver_name_fmt = 'rte_pmd_@0@'
> diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build
> new file mode 100644
> index 0000000..0a26d5d
> --- /dev/null
> +++ b/drivers/event/dpaa/meson.build
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +deps += ['mempool_dpaa', 'bus_dpaa', 'pmd_dpaa']
> +sources = files('dpaa_eventdev.c',
> +)
No need to move to a second line here.
> +
> +allow_experimental_apis = true
> diff --git a/drivers/event/dpaa2/meson.build b/drivers/event/dpaa2/meson.build
> new file mode 100644
> index 0000000..686b622
> --- /dev/null
> +++ b/drivers/event/dpaa2/meson.build
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +deps += ['mempool_dpaa2', 'bus_fslmc', 'bus_vdev', 'pmd_dpaa2']
> +sources = files('dpaa2_hw_dpcon.c',
> + 'dpaa2_eventdev.c'
> +)
> +
> +allow_experimental_apis = true
> diff --git a/drivers/event/meson.build b/drivers/event/meson.build
> index d7bc485..f1c3678 100644
> --- a/drivers/event/meson.build
> +++ b/drivers/event/meson.build
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: BSD-3-Clause
> # Copyright(c) 2017 Intel Corporation
>
> -drivers = ['skeleton', 'sw', 'octeontx']
> +drivers = ['skeleton', 'sw', 'octeontx', 'dpaa', 'dpaa2']
alphabetically ordering, please.
> std_deps = ['eventdev', 'kvargs']
> config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
> driver_name_fmt = 'rte_pmd_@0@_event'
> diff --git a/drivers/mempool/dpaa/meson.build b/drivers/mempool/dpaa/meson.build
> new file mode 100644
> index 0000000..08423c2
> --- /dev/null
> +++ b/drivers/mempool/dpaa/meson.build
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['bus_dpaa']
> +sources = files('dpaa_mempool.c')
> diff --git a/drivers/mempool/dpaa2/meson.build b/drivers/mempool/dpaa2/meson.build
> new file mode 100644
> index 0000000..402d087
> --- /dev/null
> +++ b/drivers/mempool/dpaa2/meson.build
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['mbuf', 'ethdev', 'kvargs', 'bus_fslmc']
> +sources = files('dpaa2_hw_mempool.c')
> diff --git a/drivers/mempool/meson.build b/drivers/mempool/meson.build
> index 5991856..47431cd 100644
> --- a/drivers/mempool/meson.build
> +++ b/drivers/mempool/meson.build
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: BSD-3-Clause
> # Copyright(c) 2017 Intel Corporation
>
> -drivers = ['ring', 'stack', 'octeontx']
> +drivers = ['ring', 'stack', 'octeontx', 'dpaa', 'dpaa2']
ordering.
> std_deps = ['mempool']
> config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
> driver_name_fmt = 'rte_mempool_@0@'
> diff --git a/drivers/net/dpaa/meson.build b/drivers/net/dpaa/meson.build
> new file mode 100644
> index 0000000..e5a2d17
> --- /dev/null
> +++ b/drivers/net/dpaa/meson.build
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +deps += ['bus_dpaa']
> +deps += ['mempool_dpaa']
> +
> +sources = files('dpaa_ethdev.c',
> + 'dpaa_rxtx.c')
> +
> +allow_experimental_apis = true
> +
> +install_headers('rte_pmd_dpaa.h')
> diff --git a/drivers/net/dpaa2/meson.build b/drivers/net/dpaa2/meson.build
> new file mode 100644
> index 0000000..025c587
> --- /dev/null
> +++ b/drivers/net/dpaa2/meson.build
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2018 NXP
> +
> +if host_machine.system() != 'linux'
> + build = false
> +endif
> +
> +deps += ['bus_fslmc'] # same with vdev bus
> +deps += ['mempool_dpaa2'] # same with vdev bus
> +sources = files('dpaa2_ethdev.c',
> + 'dpaa2_rxtx.c',
> + 'base/dpaa2_hw_dpni.c',
> + 'mc/dpni.c',
> + 'mc/dpkg.c')
> +
> +includes += include_directories('base', 'mc')
> diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> index 704cbe3..6d7a772 100644
> --- a/drivers/net/meson.build
> +++ b/drivers/net/meson.build
> @@ -4,7 +4,7 @@
> drivers = ['af_packet', 'bonding',
> 'e1000', 'fm10k', 'i40e', 'ixgbe',
> 'null', 'octeontx', 'pcap', 'ring',
> - 'sfc', 'thunderx']
> + 'sfc', 'thunderx', 'dpaa', 'dpaa2']
ordering.
> std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
> std_deps += ['bus_pci'] # very many PMDs depend on PCI, so make std
> std_deps += ['bus_vdev'] # same with vdev bus
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-02-28 14:44 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 17:25 [dpdk-dev] [PATCH 0/7] meson build support for dpaaX Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 1/7] event/dpaa: fix include header Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 2/7] dpaa: prepare for 32 bit compilation Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 3/7] dpaa2: " Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 4/7] bus/fslmc: add 32 bit functional support for ARM Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 5/7] bus/dpaa: enabling dpaa compilation for other platforms Hemant Agrawal
2018-02-27 17:25 ` [dpdk-dev] [PATCH 6/7] bus/fslmc: enabling dpaa2 " Hemant Agrawal
2018-02-28 14:45 ` Bruce Richardson
2018-02-28 16:02 ` Hemant Agrawal
2018-02-28 16:33 ` Richardson, Bruce
2018-02-27 17:25 ` [dpdk-dev] [PATCH 7/7] build: add meson support for dpaaX platforms Hemant Agrawal
2018-02-28 14:44 ` Bruce Richardson [this message]
2018-03-01 6:10 ` Hemant Agrawal
2018-03-01 14:15 ` Thomas Monjalon
2018-03-09 16:49 ` Thomas Monjalon
2018-03-09 17:42 ` Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 00/10] meson build support for dpaaX Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 01/10] event/dpaa: fix include header Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 02/10] bus/dpaa: fix the BE compilation issue Hemant Agrawal
2018-03-01 12:22 ` Shreyansh Jain
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 03/10] dpaa: prepare for 32 bit compilation Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 04/10] dpaa2: " Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 05/10] bus/fslmc: add 32 bit functional support for ARM Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 06/10] bus/dpaa: enabling dpaa compilation for other platforms Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 07/10] bus/fslmc: enabling dpaa2 " Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 08/10] config: add dpaaX build support in common linuxapp Hemant Agrawal
2018-03-09 17:11 ` Thomas Monjalon
2018-03-09 17:22 ` Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 09/10] build: add meson support for dpaaX platforms Hemant Agrawal
2018-03-01 7:33 ` [dpdk-dev] [PATCH v2 10/10] build: add meson cross compile config for dpaaX Hemant Agrawal
2018-03-14 7:55 ` [dpdk-dev] [PATCH v3 00/10] meson build support " Hemant Agrawal
2018-03-14 7:55 ` [dpdk-dev] [PATCH v3 01/10] event/dpaa: fix include header Hemant Agrawal
2018-03-14 7:55 ` [dpdk-dev] [PATCH v3 02/10] bus/dpaa: fix the BE compilation issue Hemant Agrawal
2018-03-14 7:55 ` [dpdk-dev] [PATCH v3 03/10] dpaa: prepare for 32 bit compilation Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 04/10] dpaa2: " Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 05/10] bus/fslmc: add 32 bit functional support for ARM Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 06/10] bus/dpaa: enabling dpaa compilation for other platforms Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 07/10] bus/fslmc: enabling dpaa2 " Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 08/10] config: add dpaaX build support in common linuxapp Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 09/10] build: add meson support for dpaaX platforms Hemant Agrawal
2018-03-14 7:56 ` [dpdk-dev] [PATCH v3 10/10] build: add meson cross compile config for dpaaX Hemant Agrawal
2018-03-14 9:08 ` [dpdk-dev] [PATCH v3 00/10] meson build support " Bruce Richardson
2018-03-14 9:12 ` Hemant Agrawal
2018-03-15 17:10 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180228144409.GA10572@bricha3-MOBL3.ger.corp.intel.com \
--to=bruce.richardson@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=shreyansh.jain@nxp.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).