DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tomasz Duszynski <tdu@semihalf.com>
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: jck@semihalf.com, tdu@semihalf.com, dima@marvell.com,
	nsamsono@marvell.com, jianbo.liu@arm.com, dev@dpdk.org
Subject: Re: [dpdk-dev] [RFC] net/mvpp2: implement dynamic logging
Date: Thu, 26 Apr 2018 12:44:39 +0200	[thread overview]
Message-ID: <20180426104438.GA13926@sh> (raw)
In-Reply-To: <20180425164454.21274-1-stephen@networkplumber.org>

Hello Stephen,

A few nits on this inline.

On Wed, Apr 25, 2018 at 09:44:54AM -0700, Stephen Hemminger wrote:
> All DPDK drivers should use dynamic log types, not the default PMD
> value.
>
> This is an RFC not a patch since I don't have libraries are
> hardware to validate it.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
>  drivers/net/mvpp2/mrvl_ethdev.c | 135 +++++++++++++++++---------------
>  drivers/net/mvpp2/mrvl_ethdev.h |   6 ++
>  drivers/net/mvpp2/mrvl_flow.c   |  24 +++---
>  drivers/net/mvpp2/mrvl_qos.c    |  32 ++++----
>  4 files changed, 107 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
> index 05998bf2dbc0..25969159baf9 100644
> --- a/drivers/net/mvpp2/mrvl_ethdev.c
> +++ b/drivers/net/mvpp2/mrvl_ethdev.c
> @@ -94,6 +94,8 @@ struct pp2_bpool *mrvl_port_to_bpool_lookup[RTE_MAX_ETHPORTS];
>  int mrvl_port_bpool_size[PP2_NUM_PKT_PROC][PP2_BPOOL_NUM_POOLS][RTE_MAX_LCORE];
>  uint64_t cookie_addr_high = MRVL_COOKIE_ADDR_INVALID;
>
> +int mvrl_logtype;

s/mvrl/mrvl

together with the others typos similar to this in other places.

> +
>  struct mrvl_ifnames {
>  	const char *names[PP2_NUM_ETH_PPIO * PP2_NUM_PKT_PROC];
>  	int idx;
> @@ -206,7 +208,7 @@ mrvl_init_hif(int core_id)
>
>  	ret = mrvl_reserve_bit(&used_hifs, MRVL_MUSDK_HIFS_MAX);
>  	if (ret < 0) {
> -		RTE_LOG(ERR, PMD, "Failed to allocate hif %d\n", core_id);
> +		MRVL_LOG(ERR, "Failed to allocate hif %d\n", core_id);
>  		return ret;
>  	}
>
> @@ -216,7 +218,7 @@ mrvl_init_hif(int core_id)
>  	params.out_size = MRVL_PP2_AGGR_TXQD_MAX;
>  	ret = pp2_hif_init(&params, &hifs[core_id]);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to initialize hif %d\n", core_id);
> +		MRVL_LOG(ERR, "Failed to initialize hif %d\n", core_id);
>  		return ret;
>  	}
>
> @@ -235,7 +237,7 @@ mrvl_get_hif(struct mrvl_priv *priv, int core_id)
>
>  	ret = mrvl_init_hif(core_id);
>  	if (ret < 0) {
> -		RTE_LOG(ERR, PMD, "Failed to allocate hif %d\n", core_id);
> +		MRVL_LOG(ERR, "Failed to allocate hif %d\n", core_id);
>  		goto out;
>  	}
>
> @@ -265,7 +267,7 @@ static int
>  mrvl_configure_rss(struct mrvl_priv *priv, struct rte_eth_rss_conf *rss_conf)
>  {
>  	if (rss_conf->rss_key)
> -		RTE_LOG(WARNING, PMD, "Changing hash key is not supported\n");
> +		MRVL_LOG(WARNING, "Changing hash key is not supported\n");
>
>  	if (rss_conf->rss_hf == 0) {
>  		priv->ppio_params.inqs_params.hash_type = PP2_PPIO_HASH_T_NONE;
> @@ -307,34 +309,34 @@ mrvl_dev_configure(struct rte_eth_dev *dev)
>
>  	if (dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_NONE &&
>  	    dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> -		RTE_LOG(INFO, PMD, "Unsupported rx multi queue mode %d\n",
> +		MRVL_LOG(INFO, "Unsupported rx multi queue mode %d\n",
>  			dev->data->dev_conf.rxmode.mq_mode);
>  		return -EINVAL;
>  	}
>
>  	if (!(dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_CRC_STRIP)) {
> -		RTE_LOG(INFO, PMD,
> +		MRVL_LOG(INFO,
>  			"L2 CRC stripping is always enabled in hw\n");
>  		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
>  	}
>
>  	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_VLAN_STRIP) {
> -		RTE_LOG(INFO, PMD, "VLAN stripping not supported\n");
> +		MRVL_LOG(INFO, "VLAN stripping not supported\n");
>  		return -EINVAL;
>  	}
>
>  	if (dev->data->dev_conf.rxmode.split_hdr_size) {
> -		RTE_LOG(INFO, PMD, "Split headers not supported\n");
> +		MRVL_LOG(INFO, "Split headers not supported\n");
>  		return -EINVAL;
>  	}
>
>  	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SCATTER) {
> -		RTE_LOG(INFO, PMD, "RX Scatter/Gather not supported\n");
> +		MRVL_LOG(INFO, "RX Scatter/Gather not supported\n");
>  		return -EINVAL;
>  	}
>
>  	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO) {
> -		RTE_LOG(INFO, PMD, "LRO not supported\n");
> +		MRVL_LOG(INFO, "LRO not supported\n");
>  		return -EINVAL;
>  	}
>
> @@ -358,7 +360,7 @@ mrvl_dev_configure(struct rte_eth_dev *dev)
>
>  	if (dev->data->nb_rx_queues == 1 &&
>  	    dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_RSS) {
> -		RTE_LOG(WARNING, PMD, "Disabling hash for 1 rx queue\n");
> +		MRVL_LOG(WARNING, "Disabling hash for 1 rx queue\n");
>  		priv->ppio_params.inqs_params.hash_type = PP2_PPIO_HASH_T_NONE;
>
>  		return 0;
> @@ -482,7 +484,7 @@ mrvl_tx_queue_start(struct rte_eth_dev *dev, uint16_t queue_id)
>  	/* passing 1 enables given tx queue */
>  	ret = pp2_ppio_set_outq_state(priv->ppio, queue_id, 1);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to start txq %d\n", queue_id);
> +		MRVL_LOG(ERR, "Failed to start txq %d\n", queue_id);
>  		return ret;
>  	}
>
> @@ -514,7 +516,7 @@ mrvl_tx_queue_stop(struct rte_eth_dev *dev, uint16_t queue_id)
>  	/* passing 0 disables given tx queue */
>  	ret = pp2_ppio_set_outq_state(priv->ppio, queue_id, 0);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to stop txq %d\n", queue_id);
> +		MRVL_LOG(ERR, "Failed to stop txq %d\n", queue_id);
>  		return ret;
>  	}
>
> @@ -561,7 +563,7 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>  		priv->bpool_init_size += buffs_to_add;
>  		ret = mrvl_fill_bpool(dev->data->rx_queues[0], buffs_to_add);
>  		if (ret)
> -			RTE_LOG(ERR, PMD, "Failed to add buffers to bpool\n");
> +			MRVL_LOG(ERR, "Failed to add buffers to bpool\n");
>  	}
>
>  	/*
> @@ -576,7 +578,7 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>
>  	ret = pp2_ppio_init(&priv->ppio_params, &priv->ppio);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to init ppio\n");
> +		MRVL_LOG(ERR, "Failed to init ppio\n");
>  		return ret;
>  	}
>
> @@ -589,7 +591,7 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>  	if (!priv->uc_mc_flushed) {
>  		ret = pp2_ppio_flush_mac_addrs(priv->ppio, 1, 1);
>  		if (ret) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Failed to flush uc/mc filter list\n");
>  			goto out;
>  		}
> @@ -599,7 +601,7 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>  	if (!priv->vlan_flushed) {
>  		ret = pp2_ppio_flush_vlan(priv->ppio);
>  		if (ret) {
> -			RTE_LOG(ERR, PMD, "Failed to flush vlan list\n");
> +			MRVL_LOG(ERR, "Failed to flush vlan list\n");
>  			/*
>  			 * TODO
>  			 * once pp2_ppio_flush_vlan() is supported jump to out
> @@ -613,14 +615,14 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>  	if (mrvl_qos_cfg) {
>  		ret = mrvl_start_qos_mapping(priv);
>  		if (ret) {
> -			RTE_LOG(ERR, PMD, "Failed to setup QoS mapping\n");
> +			MRVL_LOG(ERR, "Failed to setup QoS mapping\n");
>  			goto out;
>  		}
>  	}
>
>  	ret = mrvl_dev_set_link_up(dev);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to set link up\n");
> +		MRVL_LOG(ERR, "Failed to set link up\n");
>  		goto out;
>  	}
>
> @@ -644,7 +646,7 @@ mrvl_dev_start(struct rte_eth_dev *dev)
>
>  	return 0;
>  out:
> -	RTE_LOG(ERR, PMD, "Failed to start device\n");
> +	MRVL_LOG(ERR, "Failed to start device\n");
>  	pp2_ppio_deinit(priv->ppio);
>  	return ret;
>  }
> @@ -660,7 +662,7 @@ mrvl_flush_rx_queues(struct rte_eth_dev *dev)
>  {
>  	int i;
>
> -	RTE_LOG(INFO, PMD, "Flushing rx queues\n");
> +	MRVL_LOG(INFO, "Flushing rx queues\n");
>  	for (i = 0; i < dev->data->nb_rx_queues; i++) {
>  		int ret, num;
>
> @@ -689,7 +691,7 @@ mrvl_flush_tx_shadow_queues(struct rte_eth_dev *dev)
>  	int i, j;
>  	struct mrvl_txq *txq;
>
> -	RTE_LOG(INFO, PMD, "Flushing tx shadow queues\n");
> +	MRVL_LOG(INFO, "Flushing tx shadow queues\n");
>  	for (i = 0; i < dev->data->nb_tx_queues; i++) {
>  		txq = (struct mrvl_txq *)dev->data->tx_queues[i];
>
> @@ -737,7 +739,7 @@ mrvl_flush_bpool(struct rte_eth_dev *dev)
>
>  	ret = pp2_bpool_get_num_buffs(priv->bpool, &num);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to get bpool buffers number\n");
> +		MRVL_LOG(ERR, "Failed to get bpool buffers number\n");
>  		return;
>  	}
>
> @@ -902,7 +904,7 @@ mrvl_promiscuous_enable(struct rte_eth_dev *dev)
>
>  	ret = pp2_ppio_set_promisc(priv->ppio, 1);
>  	if (ret)
> -		RTE_LOG(ERR, PMD, "Failed to enable promiscuous mode\n");
> +		MRVL_LOG(ERR, "Failed to enable promiscuous mode\n");
>  }
>
>  /**
> @@ -925,7 +927,7 @@ mrvl_allmulticast_enable(struct rte_eth_dev *dev)
>
>  	ret = pp2_ppio_set_mc_promisc(priv->ppio, 1);
>  	if (ret)
> -		RTE_LOG(ERR, PMD, "Failed enable all-multicast mode\n");
> +		MRVL_LOG(ERR, "Failed enable all-multicast mode\n");
>  }
>
>  /**
> @@ -945,7 +947,7 @@ mrvl_promiscuous_disable(struct rte_eth_dev *dev)
>
>  	ret = pp2_ppio_set_promisc(priv->ppio, 0);
>  	if (ret)
> -		RTE_LOG(ERR, PMD, "Failed to disable promiscuous mode\n");
> +		MRVL_LOG(ERR, "Failed to disable promiscuous mode\n");
>  }
>
>  /**
> @@ -965,7 +967,7 @@ mrvl_allmulticast_disable(struct rte_eth_dev *dev)
>
>  	ret = pp2_ppio_set_mc_promisc(priv->ppio, 0);
>  	if (ret)
> -		RTE_LOG(ERR, PMD, "Failed to disable all-multicast mode\n");
> +		MRVL_LOG(ERR, "Failed to disable all-multicast mode\n");
>  }
>
>  /**
> @@ -994,7 +996,7 @@ mrvl_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
>  	if (ret) {
>  		ether_format_addr(buf, sizeof(buf),
>  				  &dev->data->mac_addrs[index]);
> -		RTE_LOG(ERR, PMD, "Failed to remove mac %s\n", buf);
> +		MRVL_LOG(ERR, "Failed to remove mac %s\n", buf);
>  	}
>  }
>
> @@ -1047,7 +1049,7 @@ mrvl_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
>  	ret = pp2_ppio_add_mac_addr(priv->ppio, mac_addr->addr_bytes);
>  	if (ret) {
>  		ether_format_addr(buf, sizeof(buf), mac_addr);
> -		RTE_LOG(ERR, PMD, "Failed to add mac %s\n", buf);
> +		MRVL_LOG(ERR, "Failed to add mac %s\n", buf);
>  		return -1;
>  	}
>
> @@ -1081,7 +1083,7 @@ mrvl_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
>  	if (ret) {
>  		char buf[ETHER_ADDR_FMT_SIZE];
>  		ether_format_addr(buf, sizeof(buf), mac_addr);
> -		RTE_LOG(ERR, PMD, "Failed to set mac to %s\n", buf);
> +		MRVL_LOG(ERR, "Failed to set mac to %s\n", buf);
>  	}
>
>  	return ret;
> @@ -1118,7 +1120,7 @@ mrvl_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>
>  		idx = rxq->queue_id;
>  		if (unlikely(idx >= RTE_ETHDEV_QUEUE_STAT_CNTRS)) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"rx queue %d stats out of range (0 - %d)\n",
>  				idx, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
>  			continue;
> @@ -1129,7 +1131,7 @@ mrvl_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>  						  priv->rxq_map[idx].inq,
>  						  &rx_stats, 0);
>  		if (unlikely(ret)) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Failed to update rx queue %d stats\n", idx);
>  			break;
>  		}
> @@ -1153,7 +1155,7 @@ mrvl_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>
>  		idx = txq->queue_id;
>  		if (unlikely(idx >= RTE_ETHDEV_QUEUE_STAT_CNTRS)) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"tx queue %d stats out of range (0 - %d)\n",
>  				idx, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
>  		}
> @@ -1161,7 +1163,7 @@ mrvl_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>  		ret = pp2_ppio_outq_get_statistics(priv->ppio, idx,
>  						   &tx_stats, 0);
>  		if (unlikely(ret)) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Failed to update tx queue %d stats\n", idx);
>  			break;
>  		}
> @@ -1173,7 +1175,7 @@ mrvl_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>
>  	ret = pp2_ppio_get_statistics(priv->ppio, &ppio_stats, 0);
>  	if (unlikely(ret)) {
> -		RTE_LOG(ERR, PMD, "Failed to update port statistics\n");
> +		MRVL_LOG(ERR, "Failed to update port statistics\n");
>  		return ret;
>  	}
>
> @@ -1495,7 +1497,7 @@ mrvl_fill_bpool(struct mrvl_rxq *rxq, int num)
>  	for (i = 0; i < num; i++) {
>  		if (((uint64_t)mbufs[i] & MRVL_COOKIE_HIGH_ADDR_MASK)
>  			!= cookie_addr_high) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"mbuf virtual addr high 0x%lx out of range\n",
>  				(uint64_t)mbufs[i] >> 32);
>  			goto out;
> @@ -1541,14 +1543,14 @@ mrvl_rx_queue_offloads_okay(struct rte_eth_dev *dev, uint64_t requested)
>  	uint64_t missing = mandatory & ~requested;
>
>  	if (unsupported) {
> -		RTE_LOG(ERR, PMD, "Some Rx offloads are not supported. "
> +		MRVL_LOG(ERR, "Some Rx offloads are not supported. "
>  			"Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
>  			requested, supported);
>  		return 0;
>  	}
>
>  	if (missing) {
> -		RTE_LOG(ERR, PMD, "Some Rx offloads are missing. "
> +		MRVL_LOG(ERR, "Some Rx offloads are missing. "
>  			"Requested 0x%" PRIx64 " missing 0x%" PRIx64 ".\n",
>  			requested, missing);
>  		return 0;
> @@ -1595,7 +1597,7 @@ mrvl_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
>  		/*
>  		 * Unknown TC mapping, mapping will not have a correct queue.
>  		 */
> -		RTE_LOG(ERR, PMD, "Unknown TC mapping for queue %hu eth%hhu\n",
> +		MRVL_LOG(ERR, "Unknown TC mapping for queue %hu eth%hhu\n",
>  			idx, priv->ppio_id);
>  		return -EFAULT;
>  	}
> @@ -1603,7 +1605,7 @@ mrvl_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
>  	min_size = rte_pktmbuf_data_room_size(mp) - RTE_PKTMBUF_HEADROOM -
>  		   MRVL_PKT_EFFEC_OFFS;
>  	if (min_size < max_rx_pkt_len) {
> -		RTE_LOG(ERR, PMD,
> +		MRVL_LOG(ERR,
>  			"Mbuf size must be increased to %u bytes to hold up to %u bytes of data.\n",
>  			max_rx_pkt_len + RTE_PKTMBUF_HEADROOM +
>  			MRVL_PKT_EFFEC_OFFS,
> @@ -1705,14 +1707,14 @@ mrvl_tx_queue_offloads_okay(struct rte_eth_dev *dev, uint64_t requested)
>  	uint64_t missing = mandatory & ~requested;
>
>  	if (unsupported) {
> -		RTE_LOG(ERR, PMD, "Some Tx offloads are not supported. "
> +		MRVL_LOG(ERR, "Some Tx offloads are not supported. "
>  			"Requested 0x%" PRIx64 " supported 0x%" PRIx64 ".\n",
>  			requested, supported);
>  		return 0;
>  	}
>
>  	if (missing) {
> -		RTE_LOG(ERR, PMD, "Some Tx offloads are missing. "
> +		MRVL_LOG(ERR, "Some Tx offloads are missing. "
>  			"Requested 0x%" PRIx64 " missing 0x%" PRIx64 ".\n",
>  			requested, missing);
>  		return 0;
> @@ -1808,7 +1810,7 @@ mrvl_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
>
>  	ret = pp2_ppio_get_rx_pause(priv->ppio, &en);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to read rx pause state\n");
> +		MRVL_LOG(ERR, "Failed to read rx pause state\n");
>  		return ret;
>  	}
>
> @@ -1841,7 +1843,7 @@ mrvl_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
>  	    fc_conf->pause_time ||
>  	    fc_conf->mac_ctrl_frame_fwd ||
>  	    fc_conf->autoneg) {
> -		RTE_LOG(ERR, PMD, "Flowctrl parameter is not supported\n");
> +		MRVL_LOG(ERR, "Flowctrl parameter is not supported\n");
>
>  		return -EINVAL;
>  	}
> @@ -1853,7 +1855,7 @@ mrvl_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
>  		en = fc_conf->mode == RTE_FC_NONE ? 0 : 1;
>  		ret = pp2_ppio_set_rx_pause(priv->ppio, en);
>  		if (ret)
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Failed to change flowctrl on RX side\n");
>
>  		return ret;
> @@ -1945,7 +1947,7 @@ mrvl_eth_filter_ctrl(struct rte_eth_dev *dev __rte_unused,
>  		*(const void **)arg = &mrvl_flow_ops;
>  		return 0;
>  	default:
> -		RTE_LOG(WARNING, PMD, "Filter type (%d) not supported",
> +		MRVL_LOG(WARNING, "Filter type (%d) not supported",
>  				filter_type);
>  		return -EINVAL;
>  	}
> @@ -2042,7 +2044,7 @@ mrvl_desc_to_packet_type_and_offset(struct pp2_ppio_desc *desc,
>  		*l4_offset = *l3_offset + MRVL_ARP_LENGTH;
>  		break;
>  	default:
> -		RTE_LOG(DEBUG, PMD, "Failed to recognise l3 packet type\n");
> +		MRVL_LOG(DEBUG, "Failed to recognise l3 packet type\n");
>  		break;
>  	}
>
> @@ -2054,7 +2056,7 @@ mrvl_desc_to_packet_type_and_offset(struct pp2_ppio_desc *desc,
>  		packet_type |= RTE_PTYPE_L4_UDP;
>  		break;
>  	default:
> -		RTE_LOG(DEBUG, PMD, "Failed to recognise l4 packet type\n");
> +		MRVL_LOG(DEBUG, "Failed to recognise l4 packet type\n");
>  		break;
>  	}
>
> @@ -2125,7 +2127,7 @@ mrvl_rx_pkt_burst(void *rxq, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
>  	ret = pp2_ppio_recv(q->priv->ppio, q->priv->rxq_map[q->queue_id].tc,
>  			    q->priv->rxq_map[q->queue_id].inq, descs, &nb_pkts);
>  	if (unlikely(ret < 0)) {
> -		RTE_LOG(ERR, PMD, "Failed to receive packets\n");
> +		MRVL_LOG(ERR, "Failed to receive packets\n");
>  		return 0;
>  	}
>  	mrvl_port_bpool_size[bpool->pp2_id][bpool->id][core_id] -= nb_pkts;
> @@ -2192,14 +2194,14 @@ mrvl_rx_pkt_burst(void *rxq, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
>  			     (!rx_done && num < q->priv->bpool_init_size))) {
>  			ret = mrvl_fill_bpool(q, MRVL_BURST_SIZE);
>  			if (ret)
> -				RTE_LOG(ERR, PMD, "Failed to fill bpool\n");
> +				MRVL_LOG(ERR, "Failed to fill bpool\n");
>  		} else if (unlikely(num > q->priv->bpool_max_size)) {
>  			int i;
>  			int pkt_to_remove = num - q->priv->bpool_init_size;
>  			struct rte_mbuf *mbuf;
>  			struct pp2_buff_inf buff;
>
> -			RTE_LOG(DEBUG, PMD,
> +			MRVL_LOG(DEBUG,
>  				"\nport-%d:%d: bpool %d oversize - remove %d buffers (pool size: %d -> %d)\n",
>  				bpool->pp2_id, q->priv->ppio->port_id,
>  				bpool->id, pkt_to_remove, num,
> @@ -2320,7 +2322,7 @@ mrvl_free_sent_buffers(struct pp2_ppio *ppio, struct pp2_hif *hif,
>  	for (i = 0; i < nb_done; i++) {
>  		entry = &sq->ent[sq->tail + num];
>  		if (unlikely(!entry->buff.addr)) {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Shadow memory @%d: cookie(%lx), pa(%lx)!\n",
>  				sq->tail, (u64)entry->buff.cookie,
>  				(u64)entry->buff.addr);
> @@ -2398,7 +2400,7 @@ mrvl_tx_pkt_burst(void *txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
>
>  	sq_free_size = MRVL_PP2_TX_SHADOWQ_SIZE - sq->size - 1;
>  	if (unlikely(nb_pkts > sq_free_size)) {
> -		RTE_LOG(DEBUG, PMD,
> +		MRVL_LOG(DEBUG,
>  			"No room in shadow queue for %d packets! %d packets will be sent.\n",
>  			nb_pkts, sq_free_size);
>  		nb_pkts = sq_free_size;
> @@ -2585,7 +2587,7 @@ mrvl_eth_dev_create(struct rte_vdev_device *vdev, const char *name)
>  		rte_zmalloc("mac_addrs",
>  			    ETHER_ADDR_LEN * MRVL_MAC_ADDRS_MAX, 0);
>  	if (!eth_dev->data->mac_addrs) {
> -		RTE_LOG(ERR, PMD, "Failed to allocate space for eth addrs\n");
> +		MRVL_LOG(ERR, "Failed to allocate space for eth addrs\n");
>  		ret = -ENOMEM;
>  		goto out_free_priv;
>  	}
> @@ -2723,9 +2725,9 @@ rte_pmd_mrvl_probe(struct rte_vdev_device *vdev)
>  	 */
>  	if (!mrvl_qos_cfg) {
>  		cfgnum = rte_kvargs_count(kvlist, MRVL_CFG_ARG);
> -		RTE_LOG(INFO, PMD, "Parsing config file!\n");
> +		MRVL_LOG(INFO, "Parsing config file!\n");
>  		if (cfgnum > 1) {
> -			RTE_LOG(ERR, PMD, "Cannot handle more than one config file!\n");
> +			MRVL_LOG(ERR, "Cannot handle more than one config file!\n");
>  			goto out_free_kvlist;
>  		} else if (cfgnum == 1) {
>  			rte_kvargs_process(kvlist, MRVL_CFG_ARG,
> @@ -2736,7 +2738,7 @@ rte_pmd_mrvl_probe(struct rte_vdev_device *vdev)
>  	if (mrvl_dev_num)
>  		goto init_devices;
>
> -	RTE_LOG(INFO, PMD, "Perform MUSDK initializations\n");
> +	MRVL_LOG(INFO, "Perform MUSDK initializations\n");
>  	/*
>  	 * ret == -EEXIST is correct, it means DMA
>  	 * has been already initialized (by another PMD).
> @@ -2746,13 +2748,13 @@ rte_pmd_mrvl_probe(struct rte_vdev_device *vdev)
>  		if (ret != -EEXIST)
>  			goto out_free_kvlist;
>  		else
> -			RTE_LOG(INFO, PMD,
> +			MRVL_LOG(INFO,
>  				"DMA memory has been already initialized by a different driver.\n");
>  	}
>
>  	ret = mrvl_init_pp2();
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to init PP!\n");
> +		MRVL_LOG(ERR, "Failed to init PP!\n");
>  		goto out_deinit_dma;
>  	}
>
> @@ -2764,7 +2766,7 @@ rte_pmd_mrvl_probe(struct rte_vdev_device *vdev)
>
>  init_devices:
>  	for (i = 0; i < ifnum; i++) {
> -		RTE_LOG(INFO, PMD, "Creating %s\n", ifnames.names[i]);
> +		MRVL_LOG(INFO, "Creating %s\n", ifnames.names[i]);
>  		ret = mrvl_eth_dev_create(vdev, ifnames.names[i]);
>  		if (ret)
>  			goto out_cleanup;
> @@ -2808,7 +2810,7 @@ rte_pmd_mrvl_remove(struct rte_vdev_device *vdev)
>  	if (!name)
>  		return -EINVAL;
>
> -	RTE_LOG(INFO, PMD, "Removing %s\n", name);
> +	MRVL_LOG(INFO, "Removing %s\n", name);
>
>  	RTE_ETH_FOREACH_DEV(i) { /* FIXME: removing all devices! */
>  		char ifname[RTE_ETH_NAME_MAX_LEN];
> @@ -2819,7 +2821,7 @@ rte_pmd_mrvl_remove(struct rte_vdev_device *vdev)
>  	}
>
>  	if (mrvl_dev_num == 0) {
> -		RTE_LOG(INFO, PMD, "Perform MUSDK deinit\n");
> +		MRVL_LOG(INFO, "Perform MUSDK deinit\n");
>  		mrvl_deinit_hifs();
>  		mrvl_deinit_pp2();
>  		mv_sys_dma_mem_destroy();
> @@ -2835,3 +2837,12 @@ static struct rte_vdev_driver pmd_mrvl_drv = {
>
>  RTE_PMD_REGISTER_VDEV(net_mvpp2, pmd_mrvl_drv);
>  RTE_PMD_REGISTER_ALIAS(net_mvpp2, eth_mvpp2);
> +
> +RTE_INIT(mvrl_init_log);
> +static void
> +mvrl_init_log(void)
> +{
> +	mvrl_logtype = rte_log_register("pmd.net.mvrl");

Perhaps we can stick with new pmd naming i.e mvpp2 instead of legacy
mrvl.

> +	if (mvrl_logtype >= 0)
> +		rte_log_set_level(mvrl_logtype, RTE_LOG_NOTICE);
> +}
> diff --git a/drivers/net/mvpp2/mrvl_ethdev.h b/drivers/net/mvpp2/mrvl_ethdev.h
> index 3a428092dff3..2ba536513504 100644
> --- a/drivers/net/mvpp2/mrvl_ethdev.h
> +++ b/drivers/net/mvpp2/mrvl_ethdev.h
> @@ -98,4 +98,10 @@ struct mrvl_priv {
>
>  /** Flow operations forward declaration. */
>  extern const struct rte_flow_ops mrvl_flow_ops;
> +
> +extern int mvrl_logtype;
> +
> +#define MVRL_LOG(level, ...) \
> +	rte_log(RTE_LOG_ ## level, mrvl_logtype, "mvrl:" __VA_ARGS__)

The same here.

> +
>  #endif /* _MRVL_ETHDEV_H_ */
> diff --git a/drivers/net/mvpp2/mrvl_flow.c b/drivers/net/mvpp2/mrvl_flow.c
> index 8fd4dbfb1985..bc214fc3b68e 100644
> --- a/drivers/net/mvpp2/mrvl_flow.c
> +++ b/drivers/net/mvpp2/mrvl_flow.c
> @@ -1054,7 +1054,7 @@ mrvl_parse_eth(const struct rte_flow_item *item, struct rte_flow *flow,
>  	}
>
>  	if (mask->type) {
> -		RTE_LOG(WARNING, PMD, "eth type mask is ignored\n");
> +		MRVL_LOG(WARNING, "eth type mask is ignored\n");
>  		ret = mrvl_parse_type(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -1099,14 +1099,14 @@ mrvl_parse_vlan(const struct rte_flow_item *item,
>
>  	m = rte_be_to_cpu_16(mask->tci);
>  	if (m & MRVL_VLAN_ID_MASK) {
> -		RTE_LOG(WARNING, PMD, "vlan id mask is ignored\n");
> +		MRVL_LOG(WARNING, "vlan id mask is ignored\n");
>  		ret = mrvl_parse_vlan_id(spec, mask, flow);
>  		if (ret)
>  			goto out;
>  	}
>
>  	if (m & MRVL_VLAN_PRI_MASK) {
> -		RTE_LOG(WARNING, PMD, "vlan pri mask is ignored\n");
> +		MRVL_LOG(WARNING, "vlan pri mask is ignored\n");
>  		ret = mrvl_parse_vlan_pri(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -1172,7 +1172,7 @@ mrvl_parse_ip4(const struct rte_flow_item *item,
>  	}
>
>  	if (mask->hdr.next_proto_id) {
> -		RTE_LOG(WARNING, PMD, "next proto id mask is ignored\n");
> +		MRVL_LOG(WARNING, "next proto id mask is ignored\n");
>  		ret = mrvl_parse_ip4_proto(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -1243,7 +1243,7 @@ mrvl_parse_ip6(const struct rte_flow_item *item,
>  	}
>
>  	if (mask->hdr.proto) {
> -		RTE_LOG(WARNING, PMD, "next header mask is ignored\n");
> +		MRVL_LOG(WARNING, "next header mask is ignored\n");
>  		ret = mrvl_parse_ip6_next_hdr(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -1292,14 +1292,14 @@ mrvl_parse_tcp(const struct rte_flow_item *item,
>  	}
>
>  	if (mask->hdr.src_port) {
> -		RTE_LOG(WARNING, PMD, "tcp sport mask is ignored\n");
> +		MRVL_LOG(WARNING, "tcp sport mask is ignored\n");
>  		ret = mrvl_parse_tcp_sport(spec, mask, flow);
>  		if (ret)
>  			goto out;
>  	}
>
>  	if (mask->hdr.dst_port) {
> -		RTE_LOG(WARNING, PMD, "tcp dport mask is ignored\n");
> +		MRVL_LOG(WARNING, "tcp dport mask is ignored\n");
>  		ret = mrvl_parse_tcp_dport(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -1343,14 +1343,14 @@ mrvl_parse_udp(const struct rte_flow_item *item,
>  	}
>
>  	if (mask->hdr.src_port) {
> -		RTE_LOG(WARNING, PMD, "udp sport mask is ignored\n");
> +		MRVL_LOG(WARNING, "udp sport mask is ignored\n");
>  		ret = mrvl_parse_udp_sport(spec, mask, flow);
>  		if (ret)
>  			goto out;
>  	}
>
>  	if (mask->hdr.dst_port) {
> -		RTE_LOG(WARNING, PMD, "udp dport mask is ignored\n");
> +		MRVL_LOG(WARNING, "udp dport mask is ignored\n");
>  		ret = mrvl_parse_udp_dport(spec, mask, flow);
>  		if (ret)
>  			goto out;
> @@ -2260,7 +2260,7 @@ mrvl_flow_parse_actions(struct mrvl_priv *priv,
>  				 * Unknown TC mapping, mapping will not have
>  				 * a correct queue.
>  				 */
> -				RTE_LOG(ERR, PMD,
> +				MRVL_LOG(ERR,
>  					"Unknown TC mapping for queue %hu eth%hhu\n",
>  					q->index, priv->ppio_id);
>
> @@ -2270,7 +2270,7 @@ mrvl_flow_parse_actions(struct mrvl_priv *priv,
>  				return -rte_errno;
>  			}
>
> -			RTE_LOG(DEBUG, PMD,
> +			MRVL_LOG(DEBUG,
>  				"Action: Assign packets to queue %d, tc:%d, q:%d\n",
>  				q->index, priv->rxq_map[q->index].tc,
>  				priv->rxq_map[q->index].inq);
> @@ -2364,7 +2364,7 @@ mrvl_create_cls_table(struct rte_eth_dev *dev, struct rte_flow *first_flow)
>  	memset(&priv->cls_tbl_params, 0, sizeof(priv->cls_tbl_params));
>
>  	priv->cls_tbl_params.type = mrvl_engine_type(first_flow);
> -	RTE_LOG(INFO, PMD, "Setting cls search engine type to %s\n",
> +	MRVL_LOG(INFO, "Setting cls search engine type to %s\n",
>  			priv->cls_tbl_params.type == PP2_CLS_TBL_EXACT_MATCH ?
>  			"exact" : "maskable");
>  	priv->cls_tbl_params.max_num_rules = MRVL_CLS_MAX_NUM_RULES;
> diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c
> index 70d000cafbd8..d619bf0976e7 100644
> --- a/drivers/net/mvpp2/mrvl_qos.c
> +++ b/drivers/net/mvpp2/mrvl_qos.c
> @@ -138,7 +138,7 @@ get_outq_cfg(struct rte_cfgfile *file, int port, int outq,
>  			cfg->port[port].outq[outq].sched_mode =
>  				PP2_PPIO_SCHED_M_WRR;
>  		} else {
> -			RTE_LOG(ERR, PMD, "Unknown token: %s\n", entry);
> +			MRVL_LOG(ERR, "Unknown token: %s\n", entry);
>  			return -1;
>  		}
>  	}
> @@ -159,7 +159,7 @@ get_outq_cfg(struct rte_cfgfile *file, int port, int outq,
>  	 * global port rate limiting has priority.
>  	 */
>  	if (cfg->port[port].rate_limit_enable) {
> -		RTE_LOG(WARNING, PMD, "Port %d rate limiting already enabled\n",
> +		MRVL_LOG(WARNING, "Port %d rate limiting already enabled\n",
>  			port);
>  		return 0;
>  	}
> @@ -340,7 +340,7 @@ parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
>  			RTE_DIM(cfg->port[port].tc[tc].inq),
>  			MRVL_PP2_RXQ_MAX);
>  		if (n < 0) {
> -			RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
> +			MRVL_LOG(ERR, "Error %d while parsing: %s\n",
>  				n, entry);
>  			return n;
>  		}
> @@ -355,7 +355,7 @@ parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
>  			RTE_DIM(cfg->port[port].tc[tc].pcp),
>  			MAX_PCP);
>  		if (n < 0) {
> -			RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
> +			MRVL_LOG(ERR, "Error %d while parsing: %s\n",
>  				n, entry);
>  			return n;
>  		}
> @@ -370,7 +370,7 @@ parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
>  			RTE_DIM(cfg->port[port].tc[tc].dscp),
>  			MAX_DSCP);
>  		if (n < 0) {
> -			RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
> +			MRVL_LOG(ERR, "Error %d while parsing: %s\n",
>  				n, entry);
>  			return n;
>  		}
> @@ -390,7 +390,7 @@ parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
>  				sizeof(MRVL_TOK_PLCR_DEFAULT_COLOR_RED))) {
>  			cfg->port[port].tc[tc].color = PP2_PPIO_COLOR_RED;
>  		} else {
> -			RTE_LOG(ERR, PMD, "Error while parsing: %s\n", entry);
> +			MRVL_LOG(ERR, "Error while parsing: %s\n", entry);
>  			return -1;
>  		}
>  	}
> @@ -435,7 +435,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
>
>  	if (n == 0) {
>  		/* This is weird, but not bad. */
> -		RTE_LOG(WARNING, PMD, "Empty configuration file?\n");
> +		MRVL_LOG(WARNING, "Empty configuration file?\n");
>  		return 0;
>  	}
>
> @@ -461,7 +461,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
>  				return -1;
>  			(*cfg)->port[n].default_tc = (uint8_t)val;
>  		} else {
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Default Traffic Class required in custom configuration!\n");
>  			return -1;
>  		}
> @@ -489,7 +489,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
>  					sizeof(MRVL_TOK_PLCR_UNIT_PACKETS))) {
>  					unit = PP2_CLS_PLCR_PACKETS_TOKEN_UNIT;
>  				} else {
> -					RTE_LOG(ERR, PMD, "Unknown token: %s\n",
> +					MRVL_LOG(ERR, "Unknown token: %s\n",
>  						entry);
>  					return -1;
>  				}
> @@ -511,7 +511,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
>  					sizeof(MRVL_TOK_PLCR_COLOR_AWARE))) {
>  					mode = PP2_CLS_PLCR_COLOR_AWARE_MODE;
>  				} else {
> -					RTE_LOG(ERR, PMD,
> +					MRVL_LOG(ERR,
>  						"Error in parsing: %s\n",
>  						entry);
>  					return -1;
> @@ -682,7 +682,7 @@ setup_policer(struct mrvl_priv *priv, struct pp2_cls_plcr_params *params)
>
>  	ret = pp2_cls_plcr_init(params, &priv->policer);
>  	if (ret) {
> -		RTE_LOG(ERR, PMD, "Failed to setup %s\n", match);
> +		MRVL_LOG(ERR, "Failed to setup %s\n", match);
>  		return -1;
>  	}
>
> @@ -742,7 +742,7 @@ mrvl_configure_rxqs(struct mrvl_priv *priv, uint16_t portid,
>  	for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
>  		if (port_cfg->tc[tc].pcps > RTE_DIM(port_cfg->tc[0].pcp)) {
>  			/* Better safe than sorry. */
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Too many PCPs configured in TC %zu!\n", tc);
>  			return -1;
>  		}
> @@ -764,7 +764,7 @@ mrvl_configure_rxqs(struct mrvl_priv *priv, uint16_t portid,
>  	for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
>  		if (port_cfg->tc[tc].dscps > RTE_DIM(port_cfg->tc[0].dscp)) {
>  			/* Better safe than sorry. */
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Too many DSCPs configured in TC %zu!\n", tc);
>  			return -1;
>  		}
> @@ -786,7 +786,7 @@ mrvl_configure_rxqs(struct mrvl_priv *priv, uint16_t portid,
>  	for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
>  		if (port_cfg->tc[tc].inqs > RTE_DIM(port_cfg->tc[0].inq)) {
>  			/* Overflow. */
> -			RTE_LOG(ERR, PMD,
> +			MRVL_LOG(ERR,
>  				"Too many RX queues configured per TC %zu!\n",
>  				tc);
>  			return -1;
> @@ -795,7 +795,7 @@ mrvl_configure_rxqs(struct mrvl_priv *priv, uint16_t portid,
>  			uint8_t idx = port_cfg->tc[tc].inq[i];
>
>  			if (idx > RTE_DIM(priv->rxq_map)) {
> -				RTE_LOG(ERR, PMD, "Bad queue index %d!\n", idx);
> +				MRVL_LOG(ERR, "Bad queue index %d!\n", idx);
>  				return -1;
>  			}
>
> @@ -878,7 +878,7 @@ mrvl_start_qos_mapping(struct mrvl_priv *priv)
>  	size_t i;
>
>  	if (priv->ppio == NULL) {
> -		RTE_LOG(ERR, PMD, "ppio must not be NULL here!\n");
> +		MRVL_LOG(ERR, "ppio must not be NULL here!\n");
>  		return -1;
>  	}
>
> --
> 2.17.0
>

--
- Tomasz Duszyński

  reply	other threads:[~2018-04-26 10:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25 16:44 Stephen Hemminger
2018-04-26 10:44 ` Tomasz Duszynski [this message]
2018-05-31 14:02   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180426104438.GA13926@sh \
    --to=tdu@semihalf.com \
    --cc=dev@dpdk.org \
    --cc=dima@marvell.com \
    --cc=jck@semihalf.com \
    --cc=jianbo.liu@arm.com \
    --cc=nsamsono@marvell.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).