DPDK patches and discussions
 help / color / mirror / Atom feed
From: Kamil Chalupnik <kamilx.chalupnik@intel.com>
To: dev@dpdk.org
Cc: amr.mokhtar@intel.com, pablo.de.lara.guarch@intel.com,
	KamilX Chalupnik <kamilx.chalupnik@intel.com>
Subject: [dpdk-dev] [PATCH 05/13] baseband/turbo_sw: scalling input LLR to range [-16 16]
Date: Thu, 26 Apr 2018 15:29:59 +0200	[thread overview]
Message-ID: <20180426133008.12388-5-kamilx.chalupnik@intel.com> (raw)
In-Reply-To: <20180426133008.12388-1-kamilx.chalupnik@intel.com>

From: KamilX Chalupnik <kamilx.chalupnik@intel.com>

Update Turbo Software driver for Wireless Baseband Device:
- function scaling input LLR values to specific range [-16, 16] added
- new test vectors to check device capabilities added

Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
---
 app/test-bbdev/Makefile                            |  2 +
 app/test-bbdev/test_bbdev_perf.c                   | 44 +++++++++++++++++++++-
 .../test_vectors/turbo_enc_c1_k40_r0_e1190_rm.data | 36 ++++++++++++++++++
 .../test_vectors/turbo_enc_c1_k40_r0_e1194_rm.data | 36 ++++++++++++++++++
 .../test_vectors/turbo_enc_c1_k40_r0_e1196_rm.data | 36 ++++++++++++++++++
 .../test_vectors/turbo_enc_c1_k40_r0_e272_rm.data  | 33 ++++++++++++++++
 doc/guides/tools/testbbdev.rst                     |  7 ++++
 drivers/baseband/turbo_sw/bbdev_turbo_software.c   | 32 ++++++++++++----
 lib/librte_bbdev/rte_bbdev_op.h                    |  4 ++
 9 files changed, 220 insertions(+), 10 deletions(-)
 create mode 100644 app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1190_rm.data
 create mode 100644 app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1194_rm.data
 create mode 100644 app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1196_rm.data
 create mode 100644 app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e272_rm.data

diff --git a/app/test-bbdev/Makefile b/app/test-bbdev/Makefile
index 9aedd77..6da0c8e 100644
--- a/app/test-bbdev/Makefile
+++ b/app/test-bbdev/Makefile
@@ -20,4 +20,6 @@ SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev.c
 SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev_perf.c
 SRCS-$(CONFIG_RTE_TEST_BBDEV) += test_bbdev_vector.c
 
+LDLIBS += -lm
+
 include $(RTE_SDK)/mk/rte.app.mk
diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
index 00f3b08..0a2fdd3 100644
--- a/app/test-bbdev/test_bbdev_perf.c
+++ b/app/test-bbdev/test_bbdev_perf.c
@@ -4,6 +4,7 @@
 
 #include <stdio.h>
 #include <inttypes.h>
+#include <math.h>
 
 #include <rte_eal.h>
 #include <rte_common.h>
@@ -609,10 +610,32 @@ allocate_buffers_on_socket(struct rte_bbdev_op_data **buffers, const int len,
 	return (*buffers == NULL) ? TEST_FAILED : TEST_SUCCESS;
 }
 
+static void
+limit_input_llr_val_range(struct rte_bbdev_op_data *input_ops,
+		const uint16_t n, const int8_t max_llr_modulus)
+{
+	uint16_t i, byte_idx;
+
+	for (i = 0; i < n; ++i) {
+		struct rte_mbuf *m = input_ops[i].data;
+		while (m != NULL) {
+			int8_t *llr = rte_pktmbuf_mtod_offset(m, int8_t *,
+					input_ops[i].offset);
+			for (byte_idx = 0; byte_idx < input_ops[i].length;
+					++byte_idx)
+				llr[byte_idx] = round((double)max_llr_modulus *
+						llr[byte_idx] / INT8_MAX);
+
+			m = m->next;
+		}
+	}
+}
+
 static int
 fill_queue_buffers(struct test_op_params *op_params,
 		struct rte_mempool *in_mp, struct rte_mempool *hard_out_mp,
 		struct rte_mempool *soft_out_mp, uint16_t queue_id,
+		const struct rte_bbdev_op_cap *capabilities,
 		uint16_t min_alignment, const int socket_id)
 {
 	int ret;
@@ -649,6 +672,10 @@ fill_queue_buffers(struct test_op_params *op_params,
 				"Couldn't init rte_bbdev_op_data structs");
 	}
 
+	if (test_vector.op_type == RTE_BBDEV_OP_TURBO_DEC)
+		limit_input_llr_val_range(*queue_ops[DATA_INPUT], n,
+			capabilities->cap.turbo_dec.max_llr_modulus);
+
 	return 0;
 }
 
@@ -995,6 +1022,7 @@ run_test_case_on_device(test_case_function *test_case_func, uint8_t dev_id,
 	struct active_device *ad;
 	unsigned int burst_sz = get_burst_sz();
 	enum rte_bbdev_op_type op_type = test_vector.op_type;
+	const struct rte_bbdev_op_cap *capabilities = NULL;
 
 	ad = &active_devs[dev_id];
 
@@ -1027,9 +1055,20 @@ run_test_case_on_device(test_case_function *test_case_func, uint8_t dev_id,
 		goto fail;
 	}
 
-	if (test_vector.op_type == RTE_BBDEV_OP_TURBO_DEC)
+	if (test_vector.op_type == RTE_BBDEV_OP_TURBO_DEC) {
+		/* Find Decoder capabilities */
+		const struct rte_bbdev_op_cap *cap = info.drv.capabilities;
+		while (cap->type != RTE_BBDEV_OP_NONE) {
+			if (cap->type == RTE_BBDEV_OP_TURBO_DEC) {
+				capabilities = cap;
+				break;
+			}
+		}
+		TEST_ASSERT_NOT_NULL(capabilities,
+				"Couldn't find Decoder capabilities");
+
 		create_reference_dec_op(op_params->ref_dec_op);
-	else if (test_vector.op_type == RTE_BBDEV_OP_TURBO_ENC)
+	} else if (test_vector.op_type == RTE_BBDEV_OP_TURBO_ENC)
 		create_reference_enc_op(op_params->ref_enc_op);
 
 	for (i = 0; i < ad->nb_queues; ++i) {
@@ -1038,6 +1077,7 @@ run_test_case_on_device(test_case_function *test_case_func, uint8_t dev_id,
 				ad->hard_out_mbuf_pool,
 				ad->soft_out_mbuf_pool,
 				ad->queue_ids[i],
+				capabilities,
 				info.drv.min_alignment,
 				socket_id);
 		if (f_ret != TEST_SUCCESS) {
diff --git a/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1190_rm.data b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1190_rm.data
new file mode 100644
index 0000000..6221756
--- /dev/null
+++ b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1190_rm.data
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+op_type =
+RTE_BBDEV_OP_TURBO_ENC
+
+input0 =
+0x11D2BCAC, 0x4D
+
+output0 =
+0xD2399179, 0x640EB999, 0x2CBAF577, 0xAF224AE2, 0x9D139927, 0xE6909B29, 0xA25B7F47, 0x2AA224CE,
+0x399179F2, 0x0EB999D2, 0xBAF57764, 0x224AE22C, 0x139927AF, 0x909B299D, 0x5B7F47E6, 0xA224CEA2,
+0x9179F22A, 0xB999D239, 0xF577640E, 0x4AE22CBA, 0x9927AF22, 0x9B299D13, 0x7F47E690, 0x24CEA25B,
+0x79F22AA2, 0x99D23991, 0x77640EB9, 0xE22CBAF5, 0x27AF224A, 0x299D1399, 0x47E6909B, 0xCEA25B7F,
+0xF22AA224, 0xD2399179, 0x640EB999, 0x2CBAF577, 0xAF224AE2, 0x24
+
+e =
+1190
+
+k =
+40
+
+ncb =
+192
+
+rv_index =
+0
+
+code_block_mode =
+1
+
+op_flags =
+RTE_BBDEV_TURBO_RATE_MATCH
+
+expected_status =
+OK
diff --git a/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1194_rm.data b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1194_rm.data
new file mode 100644
index 0000000..c569abd
--- /dev/null
+++ b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1194_rm.data
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+op_type =
+RTE_BBDEV_OP_TURBO_ENC
+
+input0 =
+0x11D2BCAC, 0x4D
+
+output0 =
+0xB3E8D6DF, 0xBC8A2889, 0x744E649E, 0x99436EA6, 0x8B6EFD1D, 0xAB889238, 0xE744E6C9, 0x39E4664A,
+0xE8D6DF91, 0x8A2889B3, 0x4E649EBC, 0x436EA674, 0x6EFD1D99, 0x8892388B, 0x44E6C9AB, 0xE4664AE7,
+0xD6DF9139, 0x2889B3E8, 0x649EBC8A, 0x6EA6744E, 0xFD1D9943, 0x92388B6E, 0xE6C9AB88, 0x664AE744,
+0xDF9139E4, 0x89B3E8D6, 0x9EBC8A28, 0xA6744E64, 0x1D99436E, 0x388B6EFD, 0xC9AB8892, 0x4AE744E6,
+0x9139E466, 0xB3E8D6DF, 0xBC8A2889, 0x744E649E, 0x99436EA6, 0xC01D
+
+e =
+1194
+
+k =
+40
+
+ncb =
+192
+
+rv_index =
+2
+
+code_block_mode =
+1
+
+op_flags =
+RTE_BBDEV_TURBO_RATE_MATCH
+
+expected_status =
+OK
diff --git a/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1196_rm.data b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1196_rm.data
new file mode 100644
index 0000000..72be6f5
--- /dev/null
+++ b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e1196_rm.data
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+op_type =
+RTE_BBDEV_OP_TURBO_ENC
+
+input0 =
+0x11D2BCAC, 0x4D
+
+output0 =
+0xBC8A2889, 0x744E649E, 0x99436EA6, 0x8B6EFD1D, 0xAB889238, 0xE744E6C9, 0x39E4664A, 0xE8D6DF91,
+0x8A2889B3, 0x4E649EBC, 0x436EA674, 0x6EFD1D99, 0x8892388B, 0x44E6C9AB, 0xE4664AE7, 0xD6DF9139,
+0x2889B3E8, 0x649EBC8A, 0x6EA6744E, 0xFD1D9943, 0x92388B6E, 0xE6C9AB88, 0x664AE744, 0xDF9139E4,
+0x89B3E8D6, 0x9EBC8A28, 0xA6744E64, 0x1D99436E, 0x388B6EFD, 0xC9AB8892, 0x4AE744E6, 0x9139E466,
+0xB3E8D6DF, 0xBC8A2889, 0x744E649E, 0x99436EA6, 0x8B6EFD1D, 0x9038
+
+e =
+1196
+
+k =
+40
+
+ncb =
+192
+
+rv_index =
+3
+
+code_block_mode =
+1
+
+op_flags =
+RTE_BBDEV_TURBO_RATE_MATCH
+
+expected_status =
+OK
diff --git a/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e272_rm.data b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e272_rm.data
new file mode 100644
index 0000000..883a76c
--- /dev/null
+++ b/app/test-bbdev/test_vectors/turbo_enc_c1_k40_r0_e272_rm.data
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017 Intel Corporation
+
+op_type =
+RTE_BBDEV_OP_TURBO_ENC
+
+input0 =
+0x11d2bcac, 0x4d
+
+output0 =
+0xd2399179, 0x640eb999, 0x2cbaf577, 0xaf224ae2, 0x9d139927, 0xe6909b29, 0xa25b7f47, 0x2aa224ce,
+0x79f2
+
+e =
+272
+
+k =
+40
+
+ncb =
+192
+
+rv_index =
+0
+
+code_block_mode =
+1
+
+op_flags =
+RTE_BBDEV_TURBO_RATE_MATCH
+
+expected_status =
+OK
diff --git a/doc/guides/tools/testbbdev.rst b/doc/guides/tools/testbbdev.rst
index 5c7112d..8203787 100644
--- a/doc/guides/tools/testbbdev.rst
+++ b/doc/guides/tools/testbbdev.rst
@@ -151,6 +151,13 @@ It runs all tests with following vectors:
 
 - ``bbdev_vector_te_default.data``
 
+- ``turbo_enc_c1_k40_r0_e1190_rm.data``
+
+- ``turbo_enc_c1_k40_r0_e1194_rm.data``
+
+- ``turbo_enc_c1_k40_r0_e1196_rm.data``
+
+- ``turbo_enc_c1_k40_r0_e272_rm.data``
 
 .. code-block:: console
 
diff --git a/drivers/baseband/turbo_sw/bbdev_turbo_software.c b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
index 2728b30..14a4e0e 100644
--- a/drivers/baseband/turbo_sw/bbdev_turbo_software.c
+++ b/drivers/baseband/turbo_sw/bbdev_turbo_software.c
@@ -135,6 +135,7 @@ info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_info)
 					RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN |
 					RTE_BBDEV_TURBO_CRC_TYPE_24B |
 					RTE_BBDEV_TURBO_EARLY_TERMINATION,
+				.max_llr_modulus = 16,
 				.num_buffers_src = RTE_BBDEV_MAX_CODE_BLOCKS,
 				.num_buffers_hard_out =
 						RTE_BBDEV_MAX_CODE_BLOCKS,
@@ -578,8 +579,16 @@ process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
 
 	/* Rate-matching */
 	if (enc->op_flags & RTE_BBDEV_TURBO_RATE_MATCH) {
+		uint8_t mask_id;
+		/* Integer round up division by 8 */
+		uint16_t out_len = (e + 7) >> 3;
+		/* The mask array is indexed using E%8. E is an even number so
+		 * there are only 4 possible values.
+		 */
+		const uint8_t mask_out[] = {0xFF, 0xC0, 0xF0, 0xFC};
+
 		/* get output data starting address */
-		rm_out = (uint8_t *)rte_pktmbuf_append(m_out, (e >> 3));
+		rm_out = (uint8_t *)rte_pktmbuf_append(m_out, out_len);
 		if (rm_out == NULL) {
 			op->status |= 1 << RTE_BBDEV_DATA_ERROR;
 			rte_bbdev_log(ERR,
@@ -619,7 +628,7 @@ process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
 		rm_req.tin1 = out1;
 		rm_req.tin2 = out2;
 		rm_resp.output = rm_out;
-		rm_resp.OutputLen = (e >> 3);
+		rm_resp.OutputLen = out_len;
 		if (enc->op_flags & RTE_BBDEV_TURBO_RV_INDEX_BYPASS)
 			rm_req.bypass_rvidx = 1;
 		else
@@ -630,6 +639,13 @@ process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
 			rte_bbdev_log(ERR, "Rate matching failed");
 			return;
 		}
+
+		/* SW fills an entire last byte even if E%8 != 0. Clear the
+		 * superfluous data bits for consistency with HW device.
+		 */
+		mask_id = (e & 7) >> 1;
+		rm_out[out_len - 1] &= mask_out[mask_id];
+
 		enc->output.length += rm_resp.OutputLen;
 	} else {
 		/* Rate matching is bypassed */
@@ -806,7 +822,7 @@ remove_nulls_from_circular_buf(const uint8_t *in, uint8_t *out, uint16_t k,
 	}
 
 	/* Last interlaced row is different - its last byte is the only padding
-	 * byte. We can have from 2 up to 26 padding bytes (Nd) per sub-block.
+	 * byte. We can have from 4 up to 28 padding bytes (Nd) per sub-block.
 	 * After interlacing the 1st and 2nd parity sub-blocks we can have 0, 1
 	 * or 2 padding bytes each time we make a step of 2 * R_SUBBLOCK bytes
 	 * (moving to another column). 2nd parity sub-block uses the same
@@ -817,10 +833,10 @@ remove_nulls_from_circular_buf(const uint8_t *in, uint8_t *out, uint16_t k,
 	 * 32nd (31+1) byte, then 64th etc. (step is C_SUBBLOCK == 32) and the
 	 * last byte will be the first byte from the sub-block:
 	 * (32 + 32 * (R_SUBBLOCK-1)) % Kw == Kw % Kw == 0. Nd can't  be smaller
-	 * than 2 so we know that bytes with ids 0 and 1 must be the padding
-	 * bytes. The bytes from the 1st parity sub-block are the bytes from the
-	 * 31st column - Nd can't be greater than 26 so we are sure that there
-	 * are no padding bytes in 31st column.
+	 * than 4 so we know that bytes with ids 0, 1, 2 and 3 must be the
+	 * padding bytes. The bytes from the 1st parity sub-block are the bytes
+	 * from the 31st column - Nd can't be greater than 28 so we are sure
+	 * that there are no padding bytes in 31st column.
 	 */
 	rte_memcpy(&out[out_idx], &in[in_idx], 2 * r_subblock - 1);
 }
@@ -835,7 +851,7 @@ move_padding_bytes(const uint8_t *in, uint8_t *out, uint16_t k,
 
 	rte_memcpy(&out[nd], in, d);
 	rte_memcpy(&out[nd + kpi + 64], &in[kpi], d);
-	rte_memcpy(&out[nd + 2 * (kpi + 64)], &in[2 * kpi], d);
+	rte_memcpy(&out[(nd - 1) + 2 * (kpi + 64)], &in[2 * kpi], d);
 }
 
 static inline void
diff --git a/lib/librte_bbdev/rte_bbdev_op.h b/lib/librte_bbdev/rte_bbdev_op.h
index 1a80588..90a688e 100644
--- a/lib/librte_bbdev/rte_bbdev_op.h
+++ b/lib/librte_bbdev/rte_bbdev_op.h
@@ -379,6 +379,10 @@ struct rte_bbdev_op_turbo_enc {
 struct rte_bbdev_op_cap_turbo_dec {
 	/**< Flags from rte_bbdev_op_td_flag_bitmasks */
 	uint32_t capability_flags;
+	/** Maximal LLR absolute value. Acceptable LLR values lie in range
+	 * [-max_llr_modulus, max_llr_modulus].
+	 */
+	int8_t max_llr_modulus;
 	uint8_t num_buffers_src;  /**< Num input code block buffers */
 	/**< Num hard output code block buffers */
 	uint8_t num_buffers_hard_out;
-- 
2.5.5

  parent reply	other threads:[~2018-04-26 13:32 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-26 13:29 [dpdk-dev] [PATCH 01/13] baseband/turbo_sw: update DPDK to work with FlexRAN 1.4.0 Kamil Chalupnik
2018-04-26 13:29 ` [dpdk-dev] [PATCH 02/13] doc/turbo_sw: update Wireless Baseband Device documentation Kamil Chalupnik
2018-05-07 13:37   ` De Lara Guarch, Pablo
2018-05-09 14:46   ` [dpdk-dev] [PATCH v2 12/14] " Kamil Chalupnik
2018-04-26 13:29 ` [dpdk-dev] [PATCH 03/13] doc/bbdev: dynamic lib support Kamil Chalupnik
2018-05-09 14:51   ` [dpdk-dev] [PATCH v2 13/14] " Kamil Chalupnik
2018-04-26 13:29 ` [dpdk-dev] [PATCH 04/13] baseband/turbo_sw: memcpy changed or removed from driver Kamil Chalupnik
2018-05-07 12:26   ` De Lara Guarch, Pablo
2018-05-09 14:17   ` [dpdk-dev] [PATCH v2 02/14] baseband/turbo_sw: memory copying optimized or removed Kamil Chalupnik
2018-04-26 13:29 ` Kamil Chalupnik [this message]
2018-05-07 12:50   ` [dpdk-dev] [PATCH 05/13] baseband/turbo_sw: scalling input LLR to range [-16 16] De Lara Guarch, Pablo
2018-05-09 14:23   ` [dpdk-dev] [PATCH v2 04/14] baseband/turbo_sw: scalling likelihood ratio (LLR) input Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 06/13] baseband/turbo_sw: increase internal buffers Kamil Chalupnik
2018-05-09 14:25   ` [dpdk-dev] [PATCH v2 05/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 07/13] baseband/turbo_sw: support for optional CRC overlap Kamil Chalupnik
2018-05-09 14:28   ` [dpdk-dev] [PATCH v2 06/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 08/13] app/bbdev: update test vectors names Kamil Chalupnik
2018-05-07 13:15   ` De Lara Guarch, Pablo
2018-05-09 14:37   ` [dpdk-dev] [PATCH v2 09/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 09/13] bbdev: measure offload cost Kamil Chalupnik
2018-05-07 13:29   ` De Lara Guarch, Pablo
     [not found]     ` <EEA9FF629BF25B47BD67ADE995041EE23D0352A7@IRSMSX103.ger.corp.intel.com>
2018-05-08  9:08       ` De Lara Guarch, Pablo
     [not found]         ` <EEA9FF629BF25B47BD67ADE995041EE23D035350@IRSMSX103.ger.corp.intel.com>
2018-05-08 10:16           ` De Lara Guarch, Pablo
2018-05-09 14:30   ` [dpdk-dev] [PATCH v2 07/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 10/13] doc: update tests and usage of test app description Kamil Chalupnik
2018-05-09 14:55   ` [dpdk-dev] [PATCH v2 14/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 11/13] app/bbdev: added new test vectors Kamil Chalupnik
2018-05-09 14:39   ` [dpdk-dev] [PATCH v2 10/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 12/13] bbdev: split queue groups Kamil Chalupnik
2018-05-09 14:35   ` [dpdk-dev] [PATCH v2 08/14] " Kamil Chalupnik
2018-04-26 13:30 ` [dpdk-dev] [PATCH 13/13] app/bbdev: improve readability of test application Kamil Chalupnik
2018-05-09 14:42   ` [dpdk-dev] [PATCH v2 11/14] " Kamil Chalupnik
2018-05-09 18:55     ` De Lara Guarch, Pablo
2018-04-26 13:30 ` [dpdk-dev] [PATCH 00/13] Documentation and Turbo Software Baseband Device Update Kamil Chalupnik
2018-05-09 14:14 ` [dpdk-dev] [PATCH v2 01/14] baseband/turbo_sw: update DPDK to work with FlexRAN 1.4.0 Kamil Chalupnik
2018-05-09 14:14   ` [dpdk-dev] [PATCH v2 00/14] Documentation and Turbo Software Baseband Device Update Kamil Chalupnik
2018-05-09 19:21     ` De Lara Guarch, Pablo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180426133008.12388-5-kamilx.chalupnik@intel.com \
    --to=kamilx.chalupnik@intel.com \
    --cc=amr.mokhtar@intel.com \
    --cc=dev@dpdk.org \
    --cc=pablo.de.lara.guarch@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).