DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Ori Kam <orika@mellanox.com>
Cc: "ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
	"declan.doherty@intel.com" <declan.doherty@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	Adrien Mazarguil <adrien.mazarguil@6wind.com>,
	Thomas Monjalon <thomas@monjalon.net>
Subject: Re: [dpdk-dev] [RFC] ethdev: support tunnel encapsulation action
Date: Mon, 11 Jun 2018 09:53:49 +0200	[thread overview]
Message-ID: <20180611075349.3rkjgdzcqwv4s52b@laranjeiro-vm.dev.6wind.com> (raw)
In-Reply-To: <AM4PR05MB342592F41928FB6116D490A9DB780@AM4PR05MB3425.eurprd05.prod.outlook.com>

On Mon, Jun 11, 2018 at 07:27:22AM +0000, Ori Kam wrote:
> Hi
> 
> No you shouldn't understand this.
> I still think that the [1] proposal is the correct 
> approach, but due to a very short time frame for this
> release I suggest this as intermediate solution.
>
> I want to get comments and open discussion regarding
> the proposal and in worst case add it to next release.

Do you mean this API is proposed for 18.11 and the new one is for 18.08
[1] ?

Please clarify your intention.  It is clear both will not make part of
the same release.

> Ori
> 
> > -----Original Message-----
> > From: Nélio Laranjeiro [mailto:nelio.laranjeiro@6wind.com]
> > Sent: Monday, June 11, 2018 9:53 AM
> > To: Ori Kam <orika@mellanox.com>
> > Cc: ferruh.yigit@intel.com; declan.doherty@intel.com; dev@dpdk.org;
> > Adrien Mazarguil <adrien.mazarguil@6wind.com>
> > Subject: Re: [RFC] ethdev: support tunnel encapsulation action
> > 
> > Hi Ori,
> > 
> > Should we understand this proposal is nacked by [1] you have also
> > proposed?
> > 
> > If yes, answer to this one with a self-nack to make it clear.
> > 
> > Thanks,
> > 
> > On Tue, Jun 05, 2018 at 06:48:28PM +0300, Ori Kam wrote:
> > > This RFC contain proposal to add generic support for tunnel
> > > encapsulation/decapsulation.
> > >
> > > Due to the fact that there are many possible tunnel types
> > > and each tunnel type has number of header variations, there
> > > is a need for some generic command.
> > >
> > > example for tunnel headers in case of MPLSoGRE:
> > > ETH / VLAN / IPV4 / GRE / MPLS / ETH / IP / L4-L7
> > > ETH / VLAN / IPV6 / GRE / MPLS / ETH / IP / L4-L7
> > > ETH / IPV4 / GRE / MPLS / ETH / IP / L4-L7
> > > ETH / IPV6 / GRE / MPLS / ETH / IP / L4-L7
> > > ETH / VLAN / IPV4 / GRE / MPLS / IP / L4-L7
> > > ETH / VLAN / IPV6 / GRE / MPLS / IP / L4-L7
> > > ETH / IPV4 / GRE / MPLS / IP / L4-L7
> > > ETH / IPV6 / GRE / MPLS / IP / L4-L7
> > >
> > > As can be seen from the examples some of the encapsulation
> > > is done by overwriting the inner L2 packet spec.
> > >
> > > To support all of those configuration it is much
> > > easer if we create 2 encap functions one that
> > > is used to encap L2 packet and one that is used
> > > to encap L3 packet by removing the L2 and applying
> > > the encapsulation header.
> > >
> > > The use of void * buffer will enable the
> > > insertion of any valid encapsulation header.
> > > the use of such a buffer will also simplify the processing
> > > needed to validate and apply vs the use of rte_flow_items.
> > > The use of a buffer will also will be easer
> > > for some applications (for example vrouter)
> > >
> > > For decap we will also have 2 actions
> > > one for decaping a packet with inner L2
> > > and one for decaping a packet with inner L3.
> > > when decaping L3 packet the user should
> > > supplay the L2 data which should be added to the inner packet.
> > >
> > > Signed-off-by: Ori Kam <orika@mellanox.com>
> > > ---
> > >  doc/guides/prog_guide/rte_flow.rst |  141 ++++++++++++++----------------
> > -
> > >  lib/librte_ethdev/rte_flow.h       |  165 +++++++++++++++++++++-----------
> > ---
> > >  2 files changed, 161 insertions(+), 145 deletions(-)
> > >
> > > diff --git a/doc/guides/prog_guide/rte_flow.rst
> > b/doc/guides/prog_guide/rte_flow.rst
> > > index b305a72..7417833 100644
> > > --- a/doc/guides/prog_guide/rte_flow.rst
> > > +++ b/doc/guides/prog_guide/rte_flow.rst
> > > @@ -1969,112 +1969,95 @@ Implements ``OFPAT_PUSH_MPLS`` ("push a
> > new MPLS tag") as defined by the
> > >     | ``ethertype`` | EtherType |
> > >     +---------------+-----------+
> > >
> > > -Action: ``VXLAN_ENCAP``
> > > -^^^^^^^^^^^^^^^^^^^^^^^
> > > -
> > > -Performs a VXLAN encapsulation action by encapsulating the matched
> > flow in the
> > > -VXLAN tunnel as defined in the``rte_flow_action_vxlan_encap`` flow
> > items
> > > -definition.
> > > +Action: ``TUNNEL_ENCAP``
> > > +^^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > > -This action modifies the payload of matched flows. The flow definition
> > specified
> > > -in the ``rte_flow_action_tunnel_encap`` action structure must define a
> > valid
> > > -VLXAN network overlay which conforms with RFC 7348 (Virtual eXtensible
> > Local
> > > -Area Network (VXLAN): A Framework for Overlaying Virtualized Layer 2
> > Networks
> > > -over Layer 3 Networks). The pattern must be terminated with the
> > > -RTE_FLOW_ITEM_TYPE_END item type.
> > > +Perform a tunnel encapsulation action by encapsulating the matched flow
> > with
> > > +the given buffer.
> > >
> > > -.. _table_rte_flow_action_vxlan_encap:
> > > +This action modifies the payload of the matched flows.
> > > +The buffer must hold a valid tunnel encapsulation header.
> > >
> > > -.. table:: VXLAN_ENCAP
> > > +.. _table_rte_flow_action_tunnel_encap:
> > >
> > > +.. table:: TUNNEL_ENCAP
> > > +
> > >     +----------------+-------------------------------------+
> > >     | Field          | Value                               |
> > >
> > +================+=====================================+
> > > -   | ``definition`` | Tunnel end-point overlay definition |
> > > +   | ``type``       | Encapsulation tunnel type.          |
> > > +   +----------------+-------------------------------------+
> > > +   | ``buf``        | The encapsulation header.           |
> > > +   +----------------+-------------------------------------+
> > > +   | ``len``        | Buf len.                            |
> > >     +----------------+-------------------------------------+
> > >
> > > -.. _table_rte_flow_action_vxlan_encap_example:
> > > -
> > > -.. table:: IPv4 VxLAN flow pattern example.
> > > -
> > > -   +-------+----------+
> > > -   | Index | Item     |
> > > -   +=======+==========+
> > > -   | 0     | Ethernet |
> > > -   +-------+----------+
> > > -   | 1     | IPv4     |
> > > -   +-------+----------+
> > > -   | 2     | UDP      |
> > > -   +-------+----------+
> > > -   | 3     | VXLAN    |
> > > -   +-------+----------+
> > > -   | 4     | END      |
> > > -   +-------+----------+
> > > -
> > > -Action: ``VXLAN_DECAP``
> > > -^^^^^^^^^^^^^^^^^^^^^^^
> > > +Action: ``TUNNEL_DECAP``
> > > +^^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > > -Performs a decapsulation action by stripping all headers of the VXLAN
> > tunnel
> > > -network overlay from the matched flow.
> > > +Perform a tunnel decapsulation on L2 inner packet
> > >
> > > -The flow items pattern defined for the flow rule with which a
> > ``VXLAN_DECAP``
> > > -action is specified, must define a valid VXLAN tunnel as per RFC7348. If the
> > > -flow pattern does not specify a valid VXLAN tunnel then a
> > > -RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
> > > +This action modifies the payload of the matched flows.
> > > +The buffer must hold a valid tunnel encapsulation header.
> > >
> > > -This action modifies the payload of matched flows.
> > > +.. _table_rte_flow_action_tunnel_decap:
> > >
> > > -Action: ``NVGRE_ENCAP``
> > > -^^^^^^^^^^^^^^^^^^^^^^^
> > > +.. table:: TUNNEL_DECAP
> > > +
> > > +   +----------------+-------------------------------------+
> > > +   | Field          | Value                               |
> > > +
> > +================+=====================================+
> > > +   | ``type``       | Encapsulation tunnel type.          |
> > > +   +----------------+-------------------------------------+
> > >
> > > -Performs a NVGRE encapsulation action by encapsulating the matched
> > flow in the
> > > -NVGRE tunnel as defined in the``rte_flow_action_tunnel_encap`` flow
> > item
> > > -definition.
> > > +Action: ``TUNNEL_ENCAP_L3``
> > > +^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > > -This action modifies the payload of matched flows. The flow definition
> > specified
> > > -in the ``rte_flow_action_tunnel_encap`` action structure must defined a
> > valid
> > > -NVGRE network overlay which conforms with RFC 7637 (NVGRE: Network
> > > -Virtualization Using Generic Routing Encapsulation). The pattern must be
> > > -terminated with the RTE_FLOW_ITEM_TYPE_END item type.
> > > +Perform a tunnel encapsulation action by encapsulating the matched flow
> > with
> > > +the given buffer.
> > > +The given encapsulation is overwritten the original L2 part of the original
> > > +packet.
> > >
> > > -.. _table_rte_flow_action_nvgre_encap:
> > > +This action modifies the payload of the matched flows. The buffer must
> > hold
> > > +a valid tunnel encapsulation header.
> > >
> > > -.. table:: NVGRE_ENCAP
> > > +.. _table_rte_flow_action_tunnel_encap_l3:
> > >
> > > +.. table:: TUNNEL_ENCAP_L3
> > > +
> > >     +----------------+-------------------------------------+
> > >     | Field          | Value                               |
> > >
> > +================+=====================================+
> > > -   | ``definition`` | NVGRE end-point overlay definition  |
> > > +   | ``type``       | Encapsulation tunnel type.          |
> > > +   +----------------+-------------------------------------+
> > > +   | ``buf``        | The encapsulation header.           |
> > > +   +----------------+-------------------------------------+
> > > +   | ``len``        | Buf len.                            |
> > >     +----------------+-------------------------------------+
> > >
> > > -.. _table_rte_flow_action_nvgre_encap_example:
> > > -
> > > -.. table:: IPv4 NVGRE flow pattern example.
> > > -
> > > -   +-------+----------+
> > > -   | Index | Item     |
> > > -   +=======+==========+
> > > -   | 0     | Ethernet |
> > > -   +-------+----------+
> > > -   | 1     | IPv4     |
> > > -   +-------+----------+
> > > -   | 2     | NVGRE    |
> > > -   +-------+----------+
> > > -   | 3     | END      |
> > > -   +-------+----------+
> > > +Action: ``TUNNEL_DECAP_L3``
> > > +^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > > -Action: ``NVGRE_DECAP``
> > > -^^^^^^^^^^^^^^^^^^^^^^^
> > > +Perform a tunnel decapsulation action by removing the encapsulating
> > packet header
> > > +and adding the L2 header which is suplied in the buf parameter.
> > >
> > > -Performs a decapsulation action by stripping all headers of the NVGRE
> > tunnel
> > > -network overlay from the matched flow.
> > > +This action modifies the payload of the matched flows.
> > > +The buffer must hold a valid L2 header and the flow must match patteran
> > with the
> > > +selected tunnel type.
> > >
> > > -The flow items pattern defined for the flow rule with which a
> > ``NVGRE_DECAP``
> > > -action is specified, must define a valid NVGRE tunnel as per RFC7637. If the
> > > -flow pattern does not specify a valid NVGRE tunnel then a
> > > -RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
> > > +.. _table_rte_flow_action_tunnel_decap_l3:
> > >
> > > -This action modifies the payload of matched flows.
> > > +.. table:: TUNNEL_DECAP_L3
> > > +
> > > +   +----------------+-------------------------------------+
> > > +   | Field          | Value                               |
> > > +
> > +================+=====================================+
> > > +   | ``type``       | Encapsulation tunnel type.          |
> > > +   +----------------+-------------------------------------+
> > > +   | ``buf``        | The encapsulation header.           |
> > > +   +----------------+-------------------------------------+
> > > +   | ``len``        | Buf len.                            |
> > > +   +----------------+-------------------------------------+
> > >
> > >  Negative types
> > >  ~~~~~~~~~~~~~~
> > > diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> > > index f8ba71c..cc01786 100644
> > > --- a/lib/librte_ethdev/rte_flow.h
> > > +++ b/lib/librte_ethdev/rte_flow.h
> > > @@ -1473,40 +1473,74 @@ enum rte_flow_action_type {
> > >  	RTE_FLOW_ACTION_TYPE_OF_PUSH_MPLS,
> > >
> > >  	/**
> > > -	 * Encapsulate flow in VXLAN tunnel as defined in
> > > -	 * rte_flow_action_vxlan_encap action structure.
> > > + 	 * Encapsulte a packet with tunnel header.
> > > + 	 *
> > > + 	 * See struct rte_flow_action_tunnel_encap.
> > > + 	 */
> > > +	RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP,
> > > +
> > > +	/**
> > > + 	 * Encapsulte a packet with tunnel header replacing
> > > + 	 * the inner L2 data.
> > > + 	 *
> > > + 	 * See struct rte_flow_action_tunnel_encap_l3.
> > > + 	 */
> > > +	RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3,
> > > +
> > > +	/**
> > > +	 * Decapsulate outer most tunnel from matched flow.
> > >  	 *
> > > -	 * See struct rte_flow_action_vxlan_encap.
> > > +	 * If flow pattern does not define a valid tunnel then
> > > +	 * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION
> > > +	 * error.
> > >  	 */
> > > -	RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP,
> > > +	RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP,
> > >
> > >  	/**
> > > -	 * Decapsulate outer most VXLAN tunnel from matched flow.
> > > +	 * Decapsulate outer most tunnel from matched flow and replace
> > > +	 * the L2 header with the new header.
> > > +	 * Valid header must be L2 only.
> > >  	 *
> > > -	 * If flow pattern does not define a valid VXLAN tunnel (as specified
> > by
> > > -	 * RFC7348) then the PMD should return a
> > RTE_FLOW_ERROR_TYPE_ACTION
> > > +	 * If flow pattern does not define a valid tunnel then
> > > +	 * the PMD should return a RTE_FLOW_ERROR_TYPE_ACTION
> > >  	 * error.
> > > +	 *
> > > +	 * See struct rte_flow_action_tunnel_decap_l3
> > >  	 */
> > > -	RTE_FLOW_ACTION_TYPE_VXLAN_DECAP,
> > > +	RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3,
> > > +};
> > >
> > > +enum rte_flow_tunnel_type {
> > >  	/**
> > > -	 * Encapsulate flow in NVGRE tunnel defined in the
> > > -	 * rte_flow_action_nvgre_encap action structure.
> > > -	 *
> > > -	 * See struct rte_flow_action_nvgre_encap.
> > > +	 * VXLAN tunnel type.
> > >  	 */
> > > -	RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP,
> > > +	RTE_FLOW_TUNNEL_TYPE_VXLAN,
> > >
> > >  	/**
> > > -	 * Decapsulate outer most NVGRE tunnel from matched flow.
> > > -	 *
> > > -	 * If flow pattern does not define a valid NVGRE tunnel (as specified
> > by
> > > -	 * RFC7637) then the PMD should return a
> > RTE_FLOW_ERROR_TYPE_ACTION
> > > -	 * error.
> > > +	 * VXLAN_GPE tunnel type.
> > >  	 */
> > > -	RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,
> > > -};
> > > +	RTE_FLOW_TUNNEL_TYPE_VXLAN_GPE,
> > >
> > > +	/**
> > > +	 * MPLSoGRE tunnel type.
> > > +	 */
> > > +	RTE_FLOW_TUNNEL_TYPE_MPLSoGRE,
> > > +
> > > +	/**
> > > +	 * MPLSoUDP tunnel type.
> > > +	 */
> > > +	RTE_FLOW_TUNNEL_TYPE_MPLSoUDP,
> > > +
> > > +	/**
> > > +	 * NVGRE tunnel type.
> > > +	 */
> > > +	RTE_FLOW_TUNNEL_TYPE_NVGRE,
> > > +
> > > +	/**
> > > +	 * GRE tunnel type.
> > > +	 */
> > > +	RTE_FLOW_TUNNEL_TYPE_GRE,
> > > +};
> > >  /**
> > >   * RTE_FLOW_ACTION_TYPE_MARK
> > >   *
> > > @@ -1526,7 +1560,7 @@ struct rte_flow_action_mark {
> > >   * @b EXPERIMENTAL: this structure may change without prior notice
> > >   *
> > >   * RTE_FLOW_ACTION_TYPE_JUMP
> > > - *
> > > + o*
> > >   * Redirects packets to a group on the current device.
> > >   *
> > >   * In a hierarchy of groups, which can be used to represent physical or
> > logical
> > > @@ -1803,69 +1837,68 @@ struct rte_flow_action_of_push_mpls {
> > >   * @warning
> > >   * @b EXPERIMENTAL: this structure may change without prior notice
> > >   *
> > > - * RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
> > > - *
> > > - * VXLAN tunnel end-point encapsulation data definition
> > > + * RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP
> > >   *
> > > - * The tunnel definition is provided through the flow item pattern, the
> > > - * provided pattern must conform to RFC7348 for the tunnel specified. The
> > flow
> > > - * definition must be provided in order from the
> > RTE_FLOW_ITEM_TYPE_ETH
> > > - * definition up the end item which is specified by
> > RTE_FLOW_ITEM_TYPE_END.
> > > + * Tunnel end-point encapsulation data definition.
> > >   *
> > > - * The mask field allows user to specify which fields in the flow item
> > > - * definitions can be ignored and which have valid data and can be used
> > > - * verbatim.
> > > - *
> > > - * Note: the last field is not used in the definition of a tunnel and can be
> > > - * ignored.
> > > + * The tunnel definition is provided through the use of buffer that
> > > + * holds the encapsulating header.
> > > + * Provided header must be a valid outer tunnel header.
> > > + */
> > > +struct rte_flow_action_tunnel_encap {
> > > +	enum rte_flow_tunnel_type type; /**< The tunnel type. */
> > > +	void *buf; /**< The header to be used. */
> > > +	uint32_t len; /**< The buf len. */
> > > +};
> > > +
> > > +/**
> > > + * @warning
> > > + * @b EXPERIMENTAL: this structure may change without prior notice
> > >   *
> > > - * Valid flow definition for RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP
> > include:
> > > + * RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP
> > >   *
> > > - * - ETH / IPV4 / UDP / VXLAN / END
> > > - * - ETH / IPV6 / UDP / VXLAN / END
> > > - * - ETH / VLAN / IPV4 / UDP / VXLAN / END
> > > + * Tunnel end-point dencapsulation data definition.
> > >   *
> > > + * The tunnel type must match the flow rule spec.
> > >   */
> > > -struct rte_flow_action_vxlan_encap {
> > > -	/**
> > > -	 * Encapsulating vxlan tunnel definition
> > > -	 * (terminated by the END pattern item).
> > > -	 */
> > > -	struct rte_flow_item *definition;
> > > +struct rte_flow_action_tunnel_decap {
> > > +	enum rte_flow_tunnel_type type; /**< The tunnel type. */
> > >  };
> > >
> > >  /**
> > >   * @warning
> > >   * @b EXPERIMENTAL: this structure may change without prior notice
> > >   *
> > > - * RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP
> > > - *
> > > - * NVGRE tunnel end-point encapsulation data definition
> > > - *
> > > - * The tunnel definition is provided through the flow item pattern  the
> > > - * provided pattern must conform with RFC7637. The flow definition must
> > be
> > > - * provided in order from the RTE_FLOW_ITEM_TYPE_ETH definition up
> > the end item
> > > - * which is specified by RTE_FLOW_ITEM_TYPE_END.
> > > + * RTE_FLOW_ACTION_TYPE_TUNNEL_ENCAP_L3
> > >   *
> > > - * The mask field allows user to specify which fields in the flow item
> > > - * definitions can be ignored and which have valid data and can be used
> > > - * verbatim.
> > > + * Tunnel end-point encapsulation over the inner L2 data definition.
> > >   *
> > > - * Note: the last field is not used in the definition of a tunnel and can be
> > > - * ignored.
> > > + * The tunnel definition is provided through the use of buffer that
> > > + * holds the encapsulating header.
> > > + * Provided header must be a valid outer tunnel header.
> > > + */
> > > +struct rte_flow_action_tunnel_encap_l3 {
> > > +	enum rte_flow_tunnel_type type; /**< The tunnel type. */
> > > +	void *buf; /**< The header to be used. */
> > > +	uint32_t len; /**< The buf len. */
> > > +};
> > > +
> > > +/**
> > > + * @warning
> > > + * @b EXPERIMENTAL: this structure may change without prior notice
> > >   *
> > > - * Valid flow definition for RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP
> > include:
> > > + * RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3
> > >   *
> > > - * - ETH / IPV4 / NVGRE / END
> > > - * - ETH / VLAN / IPV6 / NVGRE / END
> > > + * Tunnel end-point dencapsulation data definition.
> > > + * after the decapsulation, the L2 of the resulted packet
> > > + * is replaced with the supplied buffer.
> > >   *
> > > + * The tunnel type must match the flow rule spec.
> > >   */
> > > -struct rte_flow_action_nvgre_encap {
> > > -	/**
> > > -	 * Encapsulating vxlan tunnel definition
> > > -	 * (terminated by the END pattern item).
> > > -	 */
> > > -	struct rte_flow_item *definition;
> > > +struct rte_flow_action_tunnel_decap_l3 {
> > > +	enum rte_flow_tunnel_type type; /**< The tunnel type. */
> > > +	void *buf; /**< The L2 header to be used.*/
> > > +	uint32_t len; /**< The len of the buf. */
> > >  };
> > >
> > >  /*
> > > --
> > > 1.7.1
> > >

[1] http://dpdk.org/dev/patchwork/patch/40965/

-- 
Nélio Laranjeiro
6WIND

  reply	other threads:[~2018-06-11  7:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-05 15:48 Ori Kam
2018-06-11  6:53 ` Nélio Laranjeiro
2018-06-11  7:27   ` Ori Kam
2018-06-11  7:53     ` Nélio Laranjeiro [this message]
2018-06-11 10:46 ` [dpdk-dev] [RFC v2] ethdev: support MPLS " Ori Kam
2018-06-11 11:03 ` [dpdk-dev] [RFC] ethdev: support " Ori Kam
2018-06-11 11:20   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180611075349.3rkjgdzcqwv4s52b@laranjeiro-vm.dev.6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=orika@mellanox.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).