From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, stable@dpdk.org
Subject: [dpdk-stable] [PATCH v2 05/23] net/bnxt: fix dev close operation
Date: Thu, 28 Jun 2018 13:15:31 -0700 [thread overview]
Message-ID: <20180628201549.3507-6-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20180628201549.3507-1-ajit.khaparde@broadcom.com>
We are not cleaning up all the memory and also not unregistering
the driver during device close operation. This patch fixes the issue.
Fixes: 893074951314 ("net/bnxt: free memory in close operation")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
--
v1->v2: Remove incorrectly added RTE_PCI_DRV_INTR_RMV.
---
drivers/net/bnxt/bnxt_ethdev.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 33560db0d..233a7c312 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -152,6 +152,7 @@ static const struct rte_pci_id bnxt_pci_id_map[] = {
static int bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask);
static void bnxt_print_link_info(struct rte_eth_dev *eth_dev);
static int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu);
+static int bnxt_dev_uninit(struct rte_eth_dev *eth_dev);
/***********************/
@@ -668,6 +669,8 @@ static void bnxt_dev_close_op(struct rte_eth_dev *eth_dev)
rte_free(bp->grp_info);
bp->grp_info = NULL;
}
+
+ bnxt_dev_uninit(eth_dev);
}
static void bnxt_mac_addr_remove_op(struct rte_eth_dev *eth_dev,
@@ -3116,7 +3119,6 @@ static int bnxt_init_board(struct rte_eth_dev *eth_dev)
return rc;
}
-static int bnxt_dev_uninit(struct rte_eth_dev *eth_dev);
#define ALLOW_FUNC(x) \
{ \
@@ -3408,13 +3410,15 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
}
static int
-bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
+bnxt_dev_uninit(struct rte_eth_dev *eth_dev)
+{
struct bnxt *bp = eth_dev->data->dev_private;
int rc;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return -EPERM;
+ PMD_DRV_LOG(DEBUG, "Calling Device uninit\n");
bnxt_disable_int(bp);
bnxt_free_int(bp);
bnxt_free_mem(bp);
@@ -3428,8 +3432,17 @@ bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
}
rc = bnxt_hwrm_func_driver_unregister(bp, 0);
bnxt_free_hwrm_resources(bp);
- rte_memzone_free((const struct rte_memzone *)bp->tx_mem_zone);
- rte_memzone_free((const struct rte_memzone *)bp->rx_mem_zone);
+
+ if (bp->tx_mem_zone) {
+ rte_memzone_free((const struct rte_memzone *)bp->tx_mem_zone);
+ bp->tx_mem_zone = NULL;
+ }
+
+ if (bp->rx_mem_zone) {
+ rte_memzone_free((const struct rte_memzone *)bp->rx_mem_zone);
+ bp->rx_mem_zone = NULL;
+ }
+
if (bp->dev_stopped == 0)
bnxt_dev_close_op(eth_dev);
if (bp->pf.vf_info)
--
2.15.2 (Apple Git-101.1)
next prev parent reply other threads:[~2018-06-28 20:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <f02289d7-4111-ab00-9ce9-00dd5c8b3c18@intel.com>
[not found] ` <20180628201549.3507-1-ajit.khaparde@broadcom.com>
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 01/23] net/bnxt: fix clear port stats Ajit Khaparde
2018-06-28 20:15 ` Ajit Khaparde [this message]
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 07/23] net/bnxt: fix HW Tx checksum offload check Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 09/23] net/bnxt: fix Rx/Tx queue start/stop operations Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 12/23] net/bnxt: check for invalid vnic id Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 14/23] net/bnxt: fix Tx with multiple mbuf Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 15/23] net/bnxt: revert reset of L2 filter id Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 16/23] net/bnxt: check filter type before clearing it Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 17/23] net/bnxt: fix set MTU Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 18/23] net/bnxt: fix incorrect IO address handling in Tx Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 20/23] net/bnxt: fix to move a flow to a different queue Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 22/23] net/bnxt: fix Rx ring count limitation Ajit Khaparde
2018-06-28 20:15 ` [dpdk-stable] [PATCH v2 23/23] net/bnxt: use correct flags during VLAN configuration Ajit Khaparde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628201549.3507-6-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).