From: Tiwei Bie <tiwei.bie@intel.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: zhihong.wang@intel.com, jfreimann@redhat.com, dev@dpdk.org,
mst@redhat.com, jasowang@redhat.com, wexu@redhat.com,
Yuanhan Liu <yuanhan.liu@linux.intel.com>,
Jens Freimann <jfreiman@redhat.com>
Subject: Re: [dpdk-dev] [PATCH v5 03/15] vhost: vring address setup for packed queues
Date: Fri, 29 Jun 2018 23:59:29 +0800 [thread overview]
Message-ID: <20180629155929.GC31010@debian> (raw)
In-Reply-To: <20180622134327.18973-4-maxime.coquelin@redhat.com>
On Fri, Jun 22, 2018 at 03:43:15PM +0200, Maxime Coquelin wrote:
> From: Yuanhan Liu <yuanhan.liu@linux.intel.com>
>
> Add code to set up packed queues when enabled.
>
> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
> Signed-off-by: Jens Freimann <jfreiman@redhat.com>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
> lib/librte_vhost/vhost.c | 44 ++++++++++++++++++++++++++++++++++++++-----
> lib/librte_vhost/vhost.h | 7 ++++++-
> lib/librte_vhost/vhost_user.c | 29 +++++++++++++++++++++++++++-
> 3 files changed, 73 insertions(+), 7 deletions(-)
>
> diff --git a/lib/librte_vhost/vhost.c b/lib/librte_vhost/vhost.c
> index afded4952..a85c6646f 100644
> --- a/lib/librte_vhost/vhost.c
> +++ b/lib/librte_vhost/vhost.c
> @@ -23,6 +23,7 @@
> #include "iotlb.h"
> #include "vhost.h"
> #include "vhost_user.h"
> +#include "virtio-packed.h"
>
> struct virtio_net *vhost_devices[MAX_VHOST_DEVICE];
>
> @@ -115,14 +116,11 @@ free_device(struct virtio_net *dev)
> rte_free(dev);
> }
>
> -int
> -vring_translate(struct virtio_net *dev, struct vhost_virtqueue *vq)
> +static int
> +vring_translate_split(struct virtio_net *dev, struct vhost_virtqueue *vq)
> {
> uint64_t req_size, size;
>
> - if (!(dev->features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
> - goto out;
> -
> req_size = sizeof(struct vring_desc) * vq->size;
> size = req_size;
> vq->desc = (struct vring_desc *)(uintptr_t)vhost_iova_to_vva(dev, vq,
> @@ -153,6 +151,40 @@ vring_translate(struct virtio_net *dev, struct vhost_virtqueue *vq)
> if (!vq->used || size != req_size)
> return -1;
>
> + return 0;
> +}
> +
> +static int
> +vring_translate_packed(struct virtio_net *dev, struct vhost_virtqueue *vq)
> +{
> + uint64_t req_size, size;
> +
> + req_size = sizeof(struct vring_desc_packed) * vq->size;
> + size = req_size;
> + vq->desc_packed =
> + (struct vring_desc_packed *)(uintptr_t)vhost_iova_to_vva(dev,
> + vq, vq->ring_addrs.desc_user_addr,
> + &size, VHOST_ACCESS_RW);
> + if (!vq->desc || size != req_size)
Should check vq->desc_packed instead of vq->desc.
> + return -1;
Also need to get vq->driver_event and vq->device_event.
Maybe shouldn't do it in this patch. But it's missing
in the whole patch set.
> +
> + return 0;
> +}
> +
> +int
> +vring_translate(struct virtio_net *dev, struct vhost_virtqueue *vq)
> +{
> +
> + if (!(dev->features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
> + goto out;
> +
> + if (vq_is_packed(dev)) {
> + if (vring_translate_packed(dev, vq) < 0)
> + return -1;
> + } else {
> + if (vring_translate_split(dev, vq) < 0)
> + return -1;
> + }
> out:
> vq->access_ok = 1;
>
> @@ -234,6 +266,8 @@ alloc_vring_queue(struct virtio_net *dev, uint32_t vring_idx)
> dev->virtqueue[vring_idx] = vq;
> init_vring_queue(dev, vring_idx);
> rte_spinlock_init(&vq->access_lock);
> + vq->avail_wrap_counter = 1;
> + vq->used_wrap_counter = 1;
>
> dev->nr_vring += 1;
>
> diff --git a/lib/librte_vhost/vhost.h b/lib/librte_vhost/vhost.h
> index 34a614c97..671b4b3bf 100644
> --- a/lib/librte_vhost/vhost.h
> +++ b/lib/librte_vhost/vhost.h
> @@ -84,7 +84,10 @@ struct log_cache_entry {
> * Structure contains variables relevant to RX/TX virtqueues.
> */
> struct vhost_virtqueue {
> - struct vring_desc *desc;
> + union {
> + struct vring_desc *desc;
> + struct vring_desc_packed *desc_packed;
> + };
> struct vring_avail *avail;
> struct vring_used *used;
> uint32_t size;
> @@ -122,6 +125,8 @@ struct vhost_virtqueue {
>
> struct batch_copy_elem *batch_copy_elems;
> uint16_t batch_copy_nb_elems;
> + uint16_t used_wrap_counter;
> + uint16_t avail_wrap_counter;
Not quite sure about this. Do you think it will be
better to define wrap counters as bool (as only 0 or
1 are available)?
>
> struct log_cache_entry log_cache[VHOST_LOG_CACHE_NR];
> uint16_t log_cache_nb_elem;
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 947290fc3..b6097c085 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -39,6 +39,7 @@
> #include "iotlb.h"
> #include "vhost.h"
> #include "vhost_user.h"
> +#include "virtio-packed.h"
>
> #define VIRTIO_MIN_MTU 68
> #define VIRTIO_MAX_MTU 65535
> @@ -477,6 +478,30 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
> struct vhost_vring_addr *addr = &vq->ring_addrs;
> uint64_t len;
>
> + if (vq_is_packed(dev)) {
> + len = sizeof(struct vring_desc_packed) * vq->size;
> + vq->desc_packed = (struct vring_desc_packed *) ring_addr_to_vva
> + (dev, vq, addr->desc_user_addr, &len);
> + vq->desc = NULL;
`vq->desc = NULL` will set vq->desc_packed to NULL.
> + vq->avail = NULL;
> + vq->used = NULL;
> + vq->log_guest_addr = 0;
> + if (vq->desc_packed == 0 ||
It's better to compare with NULL.
> + len != sizeof(struct vring_desc_packed) *
> + vq->size) {
> + RTE_LOG(DEBUG, VHOST_CONFIG,
> + "(%d) failed to map desc_packed ring.\n",
> + dev->vid);
> + return dev;
> + }
> +
> + dev = numa_realloc(dev, vq_index);
> + vq = dev->virtqueue[vq_index];
> + addr = &vq->ring_addrs;
> +
> + return dev;
> + }
> +
> /* The addresses are converted from QEMU virtual to Vhost virtual. */
> if (vq->desc && vq->avail && vq->used)
> return dev;
> @@ -490,6 +515,7 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
> dev->vid);
> return dev;
> }
> + vq->desc_packed = NULL;
It seems that above assignment isn't needed.
>
> dev = numa_realloc(dev, vq_index);
> vq = dev->virtqueue[vq_index];
> @@ -888,7 +914,8 @@ vhost_user_set_mem_table(struct virtio_net **pdev, struct VhostUserMsg *pmsg)
> static int
> vq_is_ready(struct vhost_virtqueue *vq)
> {
> - return vq && vq->desc && vq->avail && vq->used &&
> + return vq &&
> + (vq->desc_packed || (vq->desc && vq->avail && vq->used)) &&
> vq->kickfd != VIRTIO_UNINITIALIZED_EVENTFD &&
> vq->callfd != VIRTIO_UNINITIALIZED_EVENTFD;
> }
> --
> 2.14.4
>
next prev parent reply other threads:[~2018-06-29 15:59 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 13:43 [dpdk-dev] [PATCH v5 00/15] Vhost: add support to packed ring layout Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 01/15] vhost: add virtio packed virtqueue defines Maxime Coquelin
2018-06-29 15:47 ` Tiwei Bie
2018-06-29 16:20 ` Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 02/15] vhost: add helpers for packed virtqueues Maxime Coquelin
2018-06-29 15:51 ` Tiwei Bie
2018-06-29 16:21 ` Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 03/15] vhost: vring address setup for packed queues Maxime Coquelin
2018-06-29 15:59 ` Tiwei Bie [this message]
2018-06-29 16:34 ` Maxime Coquelin
2018-06-30 2:18 ` Tiwei Bie
2018-07-01 9:58 ` Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 04/15] vhost: clear shadow used table index at flush time Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 05/15] vhost: make indirect desc table copy desc type agnostic Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 06/15] vhost: clear batch copy index at copy time Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 07/15] vhost: extract split ring handling from Rx and Tx functions Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 08/15] vhost: append shadow used ring function names with split Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 09/15] vhost: add shadow used ring support for packed rings Maxime Coquelin
2018-06-29 16:08 ` Tiwei Bie
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 10/15] vhost: create descriptor mapping function Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 11/15] vhost: add vector filling support for packed ring Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 12/15] vhost: add Rx " Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 13/15] vhost: add Tx " Maxime Coquelin
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 14/15] vhost: add notification " Maxime Coquelin
2018-06-29 16:22 ` Tiwei Bie
2018-06-22 13:43 ` [dpdk-dev] [PATCH v5 15/15] vhost: advertize packed ring layout support Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180629155929.GC31010@debian \
--to=tiwei.bie@intel.com \
--cc=dev@dpdk.org \
--cc=jasowang@redhat.com \
--cc=jfreiman@redhat.com \
--cc=jfreimann@redhat.com \
--cc=maxime.coquelin@redhat.com \
--cc=mst@redhat.com \
--cc=wexu@redhat.com \
--cc=yuanhan.liu@linux.intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).