From: "Nélio Laranjeiro" <nelio.laranjeiro@6wind.com>
To: Yongseok Koh <yskoh@mellanox.com>
Cc: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action
Date: Fri, 6 Jul 2018 10:23:19 +0200 [thread overview]
Message-ID: <20180706082319.phmy3ri4zvxxe4u6@laranjeiro-vm.dev.6wind.com> (raw)
In-Reply-To: <20180705195607.GA47821@yongseok-MBP.local>
On Thu, Jul 05, 2018 at 12:56:09PM -0700, Yongseok Koh wrote:
>[...]
> > > > + if (mark->id >= MLX5_FLOW_MARK_MAX)
> > > > + return rte_flow_error_set(error, EINVAL,
> > > > + RTE_FLOW_ERROR_TYPE_ACTION_CONF,
> > > > + &mark->id,
> > > > + "mark must be between 0 and"
> > > > + " 16777199");
> > >
> > > Use %d and (MLX5_FLOW_MARK_MAX - 1), instead of fixed string.
> >
> > It needs an snprintf, rte_flow_error_set() does not accept formatting
> > strings.
>
> I think the following would work but never mind. I'm okay with leaving it as is.
> No need to make a change here.
>
> #define STRINGIFY(x) #x
> #define TOSTRING(x) STRINGIFY(x)
> "mark must be between 0 and "
> TOSTRING(MLX5_FLOW_MARK_MAX - 1));
>
It was to avoid adding a macro, but indeed there is the same kind in
mlx4, I'll port them for mlx5.
> > >[...]
> > Addressing both question here, for the flow_stop() and flow_destroy()
> > the process is different, for the stop, the flow remains with the mark
> > bit set but all queues must me cleared, there is no comparison to make.
> > As you can see, it don't even get a flow, it directly unset the mask bit
> > in the Rx queues.
> > For the destroy the issue is different, several flows may be using the
> > same Rx queues, if one of them will remains and has a mark, then the
> > associated queues must keep their mark bit set.
> > As the process is different, it would end in two distinct functions and
> > each one used by a single function.
> >
> > For the mlx5_flow_rxq_mark(), the situation is different, the same
> > process is make when a flow is created and the flow are started.
>
> I knew the differences but I just wanted to ask if having a separate function
> can be a viable option, e.g.,
>
> mlx5_flow_rxq_mark_set()
> mlx5_flow_rxq_mark_clear()
> mlx5_flow_rxq_mark_trim()
Certainly, the point is those functions have a short life as few patches
letter they will be removed.
I suppose you prefer to have them and I don't think it will take too
much time to add such function, it will make part of the next revision
;).
Thanks,
--
Nélio Laranjeiro
6WIND
next prev parent reply other threads:[~2018-07-06 8:23 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 11:21 [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 01/12] net/mlx5: remove flow support Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 02/12] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 03/12] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 04/12] net/mlx5: add flow queue action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 05/12] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 06/12] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 07/12] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 08/12] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 09/12] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 10/12] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 11/12] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 12/12] net/mlx5: add RSS " Nelio Laranjeiro
2018-05-28 13:32 ` [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Wiles, Keith
2018-05-28 13:47 ` Ferruh Yigit
2018-05-28 13:50 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 00/20] " Nelio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 01/20] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-02 21:53 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-07-03 1:07 ` Yongseok Koh
2018-07-03 7:17 ` Nélio Laranjeiro
2018-07-03 17:05 ` Yongseok Koh
2018-07-04 6:44 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 03/20] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-03 1:40 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 04/20] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-07-03 22:27 ` Yongseok Koh
2018-07-04 9:24 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 05/20] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-03 23:00 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 06/20] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-03 23:08 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 07/20] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-03 23:56 ` Yongseok Koh
2018-07-04 12:03 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 08/20] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-04 0:12 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 09/20] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-04 0:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 10/20] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-04 0:17 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 11/20] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-04 0:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-04 8:34 ` Yongseok Koh
2018-07-05 8:47 ` Nélio Laranjeiro
2018-07-05 19:56 ` Yongseok Koh
2018-07-06 8:23 ` Nélio Laranjeiro [this message]
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 13/20] net/mlx5: add RSS " Nelio Laranjeiro
2018-07-06 2:16 ` Yongseok Koh
2018-07-06 15:59 ` Nélio Laranjeiro
2018-07-06 17:35 ` Yongseok Koh
2018-07-09 13:09 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 14/20] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-06 2:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 15/20] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-06 8:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 16/20] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-06 23:14 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 17/20] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-06 23:23 ` Yongseok Koh
2018-07-09 14:53 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-06 23:46 ` Yongseok Koh
2018-07-09 13:58 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-07 0:11 ` Yongseok Koh
2018-07-09 15:00 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 20/20] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-07 1:08 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-11 19:57 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-11 20:00 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Yongseok Koh
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 " Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-12 10:44 ` [dpdk-dev] [PATCH v4 00/21] net/mlx5: flow rework Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180706082319.phmy3ri4zvxxe4u6@laranjeiro-vm.dev.6wind.com \
--to=nelio.laranjeiro@6wind.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).