From: Yongseok Koh <yskoh@mellanox.com>
To: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Cc: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item
Date: Fri, 6 Jul 2018 16:46:11 -0700 [thread overview]
Message-ID: <20180706234610.GC53779@yongseok-MBP.local> (raw)
In-Reply-To: <6190b2d787d3a9d2095e2eed17db1c20b2e3c4e1.1530111623.git.nelio.laranjeiro@6wind.com>
On Wed, Jun 27, 2018 at 05:07:50PM +0200, Nelio Laranjeiro wrote:
> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> ---
> drivers/net/mlx5/mlx5_flow.c | 191 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 186 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 47c55b426..636aaabe8 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -54,6 +54,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
> /* Pattern tunnel Layer bits. */
> #define MLX5_FLOW_LAYER_VXLAN (1u << 12)
> #define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
> +#define MLX5_FLOW_LAYER_GRE (1u << 14)
>
> /* Outer Masks. */
> #define MLX5_FLOW_LAYER_OUTER_L3 \
> @@ -66,7 +67,8 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
>
> /* Tunnel masks. */
> #define MLX5_FLOW_LAYER_TUNNEL \
> - (MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE)
> + (MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
> + MLX5_FLOW_LAYER_GRE)
>
> /* Inner Masks. */
> #define MLX5_FLOW_LAYER_INNER_L3 \
> @@ -215,6 +217,9 @@ static const struct rte_flow_expand_node mlx5_support_expansion[] = {
> },
> };
>
> +/* Tunnel protocol values. */
> +#define MLX5_PROTOCOL_GRE 47
How about using IPPROTO_GRE instead?
> +
> /** Handles information leading to a drop fate. */
> struct mlx5_flow_verbs {
> LIST_ENTRY(mlx5_flow_verbs) next;
> @@ -1005,12 +1010,23 @@ mlx5_flow_item_ipv6(const struct rte_flow_item *item, struct rte_flow *flow,
> item,
> "L3 cannot follow an L4"
> " layer");
> + /*
> + * IPv6 is not recognised by the NIC inside a GRE tunnel.
> + * Such support has to be disabled as the rule will be
> + * accepted. Tested with Mellanox OFED 4.3-3.0.2.1
> + */
This comment doesn't look appropriate. Do you think it is a bug of OFED/FW,
which can be fixed? Or, is it a HW erratum? Let's talk offline.
> + if (tunnel && layers & MLX5_FLOW_LAYER_GRE)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "IPv6 inside a GRE tunnel is"
> + " not recognised.");
> if (!mask)
> mask = &rte_flow_item_ipv6_mask;
> - ret = mlx5_flow_item_validate(item, (const uint8_t *)mask,
> - (const uint8_t *)&nic_mask,
> - sizeof(struct rte_flow_item_ipv6),
> - error);
> + ret = mlx5_flow_item_validate
> + (item, (const uint8_t *)mask,
> + (const uint8_t *)&nic_mask,
> + sizeof(struct rte_flow_item_ipv6), error);
> if (ret < 0)
> return ret;
> }
> @@ -1411,6 +1427,168 @@ mlx5_flow_item_vxlan_gpe(struct rte_eth_dev *dev,
> return size;
> }
>
> +/**
> + * Update the protocol in Verbs IPv4 spec.
> + *
> + * @param attr[in, out]
> + * Pointer to Verbs attributes structure.
> + * @param protocol[in]
> + * Protocol value to set if none is present in the specification.
> + */
> +static void
> +mlx5_flow_item_gre_ipv4_protocol_update(struct ibv_flow_attr *attr,
> + uint8_t protocol)
> +{
> + unsigned int i;
> + const enum ibv_flow_spec_type search = IBV_FLOW_SPEC_IPV4_EXT;
> + struct ibv_spec_header *hdr = (struct ibv_spec_header *)
> + ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
> +
> + if (!attr)
> + return;
> + for (i = 0; i != attr->num_of_specs; ++i) {
> + if (hdr->type == search) {
> + struct ibv_flow_spec_ipv4_ext *ip =
> + (struct ibv_flow_spec_ipv4_ext *)hdr;
> +
> + if (!ip->val.proto) {
> + ip->val.proto = protocol;
> + ip->mask.proto = 0xff;
> + }
> + break;
> + }
> + hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
> + }
> +}
> +
> +/**
> + * Update the protocol in Verbs IPv6 spec.
> + *
> + * @param attr[in, out]
> + * Pointer to Verbs attributes structure.
> + * @param protocol[in]
> + * Protocol value to set if none is present in the specification.
> + */
> +static void
> +mlx5_flow_item_gre_ipv6_protocol_update(struct ibv_flow_attr *attr,
> + uint8_t protocol)
How about consolidating the two funcs -
mlx5_flow_item_gre_ipv6_protocol_update() and
mlx5_flow_item_gre_ipv4_protocol_update()? There are many things in common.
> +{
> + unsigned int i;
> + const enum ibv_flow_spec_type search = IBV_FLOW_SPEC_IPV6;
> + struct ibv_spec_header *hdr = (struct ibv_spec_header *)
> + ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
> +
> + if (!attr)
> + return;
> + for (i = 0; i != attr->num_of_specs; ++i) {
> + if (hdr->type == search) {
> + struct ibv_flow_spec_ipv6 *ip =
> + (struct ibv_flow_spec_ipv6 *)hdr;
> +
> + if (!ip->val.next_hdr) {
What if protocol in IP header does have wrong value other than 47 (IPPROTO_GRE)?
Shouldn't we have a validation check for it in mlx5_flow_item_gre()?
> + ip->val.next_hdr = protocol;
> + ip->mask.next_hdr = 0xff;
> + }
> + break;
> + }
> + hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
> + }
> +}
> +
> +/**
> + * Validate GRE layer and possibly create the Verbs specification.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + * @param item[in]
> + * Item specification.
> + * @param flow[in, out]
> + * Pointer to flow structure.
> + * @param flow_size[in]
> + * Size in bytes of the available space for to store the flow information.
> + * @param error
> + * Pointer to error structure.
> + *
> + * @return
> + * size in bytes necessary for the conversion, a negative errno value
> + * otherwise and rte_errno is set.
> + */
> +static int
> +mlx5_flow_item_gre(const struct rte_flow_item *item,
> + struct rte_flow *flow, const size_t flow_size,
> + struct rte_flow_error *error)
> +{
> + struct mlx5_flow_verbs *verbs = flow->cur_verbs;
> + const struct rte_flow_item_gre *spec = item->spec;
> + const struct rte_flow_item_gre *mask = item->mask;
> + const uint32_t layers = mlx5_flow_layers(flow);
> +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> + unsigned int size = sizeof(struct ibv_flow_spec_gre);
> + struct ibv_flow_spec_gre tunnel = {
> + .type = IBV_FLOW_SPEC_GRE,
> + .size = size,
> + };
> +#else
> + unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
> + struct ibv_flow_spec_tunnel tunnel = {
> + .type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
> + .size = size,
> + };
> +#endif
> + int ret;
> +
> + if (layers & MLX5_FLOW_LAYER_TUNNEL)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "a tunnel is already present");
> + if (!(layers & MLX5_FLOW_LAYER_OUTER_L3))
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L3 Layer is missing");
> + if (!mask)
> + mask = &rte_flow_item_gre_mask;
> + ret = mlx5_flow_item_validate
> + (item, (const uint8_t *)mask,
> + (const uint8_t *)&rte_flow_item_gre_mask,
> + sizeof(struct rte_flow_item_gre), error);
> + if (ret < 0)
> + return ret;
> +#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
> + if (spec) {
> + tunnel.val.c_ks_res0_ver = spec->c_rsvd0_ver;
> + tunnel.val.protocol = spec->protocol;
> + tunnel.mask.c_ks_res0_ver = mask->c_rsvd0_ver;
> + tunnel.mask.protocol = mask->protocol;
> + /* Remove unwanted bits from values. */
> + tunnel.val.c_ks_res0_ver &= tunnel.mask.c_ks_res0_ver;
> + tunnel.val.protocol &= tunnel.mask.protocol;
> + tunnel.val.key &= tunnel.mask.key;
> + }
> +#else
> + if (spec && (spec->protocol & mask->protocol))
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "without MPLS support the"
> + " specification cannot be used for"
> + " filtering");
> +#endif /* !HAVE_IBV_DEVICE_MPLS_SUPPORT */
> + if (size <= flow_size) {
> + if (layers & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
> + mlx5_flow_item_gre_ipv4_protocol_update
> + (verbs->attr, MLX5_PROTOCOL_GRE);
> + else
> + mlx5_flow_item_gre_ipv6_protocol_update
> + (verbs->attr, MLX5_PROTOCOL_GRE);
> + mlx5_flow_spec_verbs_add(flow, &tunnel, size);
> + }
> + mlx5_flow_layers_update(flow, MLX5_FLOW_LAYER_GRE);
> + flow->ptype = RTE_PTYPE_TUNNEL_GRE;
> + return size;
> +}
> +
> /**
> * Validate items provided by the user.
> *
> @@ -1469,6 +1647,9 @@ mlx5_flow_items(struct rte_eth_dev *dev,
> ret = mlx5_flow_item_vxlan_gpe(dev, items, flow,
> remain, error);
> break;
> + case RTE_FLOW_ITEM_TYPE_GRE:
> + ret = mlx5_flow_item_gre(items, flow, remain, error);
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ITEM,
> --
> 2.18.0
>
next prev parent reply other threads:[~2018-07-06 23:46 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 11:21 [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 01/12] net/mlx5: remove flow support Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 02/12] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 03/12] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 04/12] net/mlx5: add flow queue action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 05/12] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 06/12] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 07/12] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 08/12] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 09/12] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 10/12] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 11/12] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 12/12] net/mlx5: add RSS " Nelio Laranjeiro
2018-05-28 13:32 ` [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Wiles, Keith
2018-05-28 13:47 ` Ferruh Yigit
2018-05-28 13:50 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 00/20] " Nelio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 01/20] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-02 21:53 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-07-03 1:07 ` Yongseok Koh
2018-07-03 7:17 ` Nélio Laranjeiro
2018-07-03 17:05 ` Yongseok Koh
2018-07-04 6:44 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 03/20] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-03 1:40 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 04/20] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-07-03 22:27 ` Yongseok Koh
2018-07-04 9:24 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 05/20] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-03 23:00 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 06/20] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-03 23:08 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 07/20] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-03 23:56 ` Yongseok Koh
2018-07-04 12:03 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 08/20] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-04 0:12 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 09/20] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-04 0:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 10/20] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-04 0:17 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 11/20] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-04 0:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-04 8:34 ` Yongseok Koh
2018-07-05 8:47 ` Nélio Laranjeiro
2018-07-05 19:56 ` Yongseok Koh
2018-07-06 8:23 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 13/20] net/mlx5: add RSS " Nelio Laranjeiro
2018-07-06 2:16 ` Yongseok Koh
2018-07-06 15:59 ` Nélio Laranjeiro
2018-07-06 17:35 ` Yongseok Koh
2018-07-09 13:09 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 14/20] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-06 2:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 15/20] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-06 8:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 16/20] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-06 23:14 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 17/20] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-06 23:23 ` Yongseok Koh
2018-07-09 14:53 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-06 23:46 ` Yongseok Koh [this message]
2018-07-09 13:58 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-07 0:11 ` Yongseok Koh
2018-07-09 15:00 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 20/20] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-07 1:08 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-11 19:57 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-11 20:00 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Yongseok Koh
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 " Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-12 10:44 ` [dpdk-dev] [PATCH v4 00/21] net/mlx5: flow rework Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180706234610.GC53779@yongseok-MBP.local \
--to=yskoh@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).