DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ashish Gupta <Ashish.Gupta@caviumnetworks.com>
To: pablo.de.lara.guarch@intel.com
Cc: dev@dpdk.org, narayanaprasad.athreya@cavium.com,
	mahipal.challa@cavium.com,
	Ashish Gupta <ashish.gupta@caviumnetworks.com>,
	Shally Verma <shally.verma@caviumnetworks.com>,
	Sunila Sahu <sunila.sahu@caviumnetworks.com>
Subject: [dpdk-dev] [PATCH v3 3/6] compress/octeontx: add xform and stream create support
Date: Sat, 21 Jul 2018 00:34:44 +0530	[thread overview]
Message-ID: <20180720190447.7979-4-Ashish.Gupta@caviumnetworks.com> (raw)
In-Reply-To: <20180720190447.7979-1-Ashish.Gupta@caviumnetworks.com>

implement non-shareable private xform for applications to
initiate stateless Compression/decompression.

Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
---
 drivers/compress/octeontx/otx_zip.h     |  19 +++-
 drivers/compress/octeontx/otx_zip_pmd.c | 149 ++++++++++++++++++++++++++++++++
 2 files changed, 167 insertions(+), 1 deletion(-)

diff --git a/drivers/compress/octeontx/otx_zip.h b/drivers/compress/octeontx/otx_zip.h
index 1289919cb..3fcd86a86 100644
--- a/drivers/compress/octeontx/otx_zip.h
+++ b/drivers/compress/octeontx/otx_zip.h
@@ -90,9 +90,24 @@ enum {
 	MAX_BUFS_PER_STREAM
 } NUM_BUFS_PER_STREAM;
 
-
+struct zip_stream;
 struct zipvf_qp;
 
+/* Algorithm handler function prototype */
+typedef int (*comp_func_t)(struct rte_comp_op *op,
+			   struct zipvf_qp *qp, struct zip_stream *zstrm);
+
+/**
+ * ZIP private stream structure
+ */
+struct zip_stream {
+	union zip_inst_s *inst;
+	/* zip instruction pointer */
+	comp_func_t func;
+	/* function to process comp operation */
+	void *bufs[MAX_BUFS_PER_STREAM];
+} _rte_cache_aligned;
+
 
 /**
  * ZIP instruction Queue
@@ -156,6 +171,8 @@ zipvf_q_init(struct zipvf_qp *qp);
 int
 zipvf_q_term(struct zipvf_qp *qp);
 
+int
+zipvf_push_command(struct zipvf_qp *qp, union zip_inst_s *zcmd);
 
 uint64_t
 zip_reg_read64(uint8_t *hw_addr, uint64_t offset);
diff --git a/drivers/compress/octeontx/otx_zip_pmd.c b/drivers/compress/octeontx/otx_zip_pmd.c
index f6285508a..fac547920 100644
--- a/drivers/compress/octeontx/otx_zip_pmd.c
+++ b/drivers/compress/octeontx/otx_zip_pmd.c
@@ -28,6 +28,103 @@ static const struct rte_compressdev_capabilities
 	RTE_COMP_END_OF_CAPABILITIES_LIST()
 };
 
+/** Parse xform parameters and setup a stream */
+static int
+zip_set_stream_parameters(struct rte_compressdev *dev,
+			const struct rte_comp_xform *xform,
+			struct zip_stream *z_stream)
+{
+	int ret;
+	union zip_inst_s *inst;
+	struct zip_vf *vf = (struct zip_vf *)dev->data->dev_private;
+	void *res;
+
+	/* Allocate resources required by a stream */
+	ret = rte_mempool_get_bulk(vf->zip_mp,
+			z_stream->bufs, MAX_BUFS_PER_STREAM);
+	if (ret < 0)
+		return -1;
+
+	/* get one command buffer from pool and set up */
+	inst = (union zip_inst_s *)z_stream->bufs[CMD_BUF];
+	res = z_stream->bufs[RES_BUF];
+
+	memset(inst->u, 0, sizeof(inst->u));
+
+	/* set bf for only first ops of stream */
+	inst->s.bf = 1;
+
+	if (xform->type == RTE_COMP_COMPRESS) {
+		inst->s.op = ZIP_OP_E_COMP;
+
+		switch (xform->compress.deflate.huffman) {
+		case RTE_COMP_HUFFMAN_DEFAULT:
+			inst->s.cc = ZIP_CC_DEFAULT;
+			break;
+		case RTE_COMP_HUFFMAN_FIXED:
+			inst->s.cc = ZIP_CC_FIXED_HUFF;
+			break;
+		case RTE_COMP_HUFFMAN_DYNAMIC:
+			inst->s.cc = ZIP_CC_DYN_HUFF;
+			break;
+		default:
+			ret = -1;
+			goto err;
+		}
+
+		switch (xform->compress.level) {
+		case RTE_COMP_LEVEL_MIN:
+			inst->s.ss = ZIP_COMP_E_LEVEL_MIN;
+			break;
+		case RTE_COMP_LEVEL_MAX:
+			inst->s.ss = ZIP_COMP_E_LEVEL_MAX;
+			break;
+		case RTE_COMP_LEVEL_NONE:
+			ZIP_PMD_ERR("Compression level not supported");
+			ret = -1;
+			goto err;
+		default:
+			/* for any value between min and max , choose
+			 * PMD default.
+			 */
+			inst->s.ss = ZIP_COMP_E_LEVEL_MED; /** PMD default **/
+			break;
+		}
+	} else if (xform->type == RTE_COMP_DECOMPRESS) {
+		inst->s.op = ZIP_OP_E_DECOMP;
+		/* from HRM,
+		 * For DEFLATE decompression, [CC] must be 0x0.
+		 * For decompression, [SS] must be 0x0
+		 */
+		inst->s.cc = 0;
+		/* Speed bit should not be set for decompression */
+		inst->s.ss = 0;
+		/* decompression context is supported only for STATEFUL
+		 * operations. Currently we support STATELESS ONLY so
+		 * skip setting of ctx pointer
+		 */
+
+	} else {
+		ZIP_PMD_ERR("\nxform type not supported");
+		ret = -1;
+		goto err;
+	}
+
+	inst->s.res_ptr_addr.s.addr = rte_mempool_virt2iova(res);
+	inst->s.res_ptr_ctl.s.length = 0;
+
+	z_stream->inst = inst;
+
+	return 0;
+
+err:
+	rte_mempool_put_bulk(vf->zip_mp,
+			     (void *)&(z_stream->bufs[0]),
+			     MAX_BUFS_PER_STREAM);
+
+	return ret;
+}
+
 /** Configure device */
 static int
 zip_pmd_config(struct rte_compressdev *dev,
@@ -253,6 +350,53 @@ zip_pmd_qp_setup(struct rte_compressdev *dev, uint16_t qp_id,
 	return -1;
 }
 
+static int
+zip_pmd_stream_create(struct rte_compressdev *dev,
+		const struct rte_comp_xform *xform, void **stream)
+{
+	int ret;
+	struct zip_stream *strm = NULL;
+
+	strm = rte_malloc(NULL,
+			sizeof(struct zip_stream), 0);
+
+	if (strm == NULL)
+		return (-ENOMEM);
+
+	ret = zip_set_stream_parameters(dev, xform, strm);
+	if (ret < 0) {
+		ZIP_PMD_ERR("failed configure xform parameters");
+		rte_free(strm);
+		return ret;
+	}
+	*stream = strm;
+	return 0;
+}
+
+static int
+zip_pmd_stream_free(struct rte_compressdev *dev, void *stream)
+{
+	struct zip_vf *vf = (struct zip_vf *) (dev->data->dev_private);
+	struct zip_stream *z_stream;
+
+	if (stream == NULL)
+		return 0;
+
+	z_stream = (struct zip_stream *)stream;
+
+	/* Free resources back to pool */
+	rte_mempool_put_bulk(vf->zip_mp,
+				(void *)&(z_stream->bufs[0]),
+				MAX_BUFS_PER_STREAM);
+
+	/* Zero out the whole structure */
+	memset(stream, 0, sizeof(struct zip_stream));
+	rte_free(stream);
+
+	return 0;
+}
+
+
 struct rte_compressdev_ops octtx_zip_pmd_ops = {
 		.dev_configure		= zip_pmd_config,
 		.dev_start		= zip_pmd_start,
@@ -266,6 +410,11 @@ struct rte_compressdev_ops octtx_zip_pmd_ops = {
 
 		.queue_pair_setup	= zip_pmd_qp_setup,
 		.queue_pair_release	= zip_pmd_qp_release,
+
+		.private_xform_create	= zip_pmd_stream_create,
+		.private_xform_free	= zip_pmd_stream_free,
+		.stream_create		= NULL,
+		.stream_free		= NULL
 };
 
 static int
-- 
2.14.3

  parent reply	other threads:[~2018-07-20 18:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-20 19:04 [dpdk-dev] [PATCH v3 0/6] compress: add Octeontx ZIP compression PMD Ashish Gupta
2018-07-20 19:04 ` [dpdk-dev] [PATCH v3 1/6] compress/octeontx: add octeontx zip PMD Ashish Gupta
2018-07-20 19:04 ` [dpdk-dev] [PATCH v3 2/6] compress/octeontx: add device setup PMD ops Ashish Gupta
2018-07-20 19:04 ` Ashish Gupta [this message]
2018-07-20 19:04 ` [dpdk-dev] [PATCH v3 4/6] compress/octeontx: add ops enq deq apis Ashish Gupta
2018-07-23 22:40   ` De Lara Guarch, Pablo
2018-07-24  8:22     ` Verma, Shally
2018-07-20 19:04 ` [dpdk-dev] [PATCH v3 5/6] doc: add Octeonx zip guide Ashish Gupta
2018-07-20 19:04 ` [dpdk-dev] [PATCH v3 6/6] usertools: update devbind for octeontx zip device Ashish Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180720190447.7979-4-Ashish.Gupta@caviumnetworks.com \
    --to=ashish.gupta@caviumnetworks.com \
    --cc=dev@dpdk.org \
    --cc=mahipal.challa@cavium.com \
    --cc=narayanaprasad.athreya@cavium.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=shally.verma@caviumnetworks.com \
    --cc=sunila.sahu@caviumnetworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).