From: Aaron Conole <aconole@redhat.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] eal: free leaked logid storage
Date: Sun, 22 Jul 2018 06:55:45 -0400 [thread overview]
Message-ID: <20180722105545.3916-1-aconole@redhat.com> (raw)
Previously, the logid variable would be leaked when the function
returned.
Signed-off-by: Aaron Conole <aconole@redhat.com>
---
lib/librte_eal/linuxapp/eal/eal.c | 65 ++++++++++++++++++++++++++-------------
1 file changed, 44 insertions(+), 21 deletions(-)
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index d2d5aae80..3208e7079 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -833,7 +833,8 @@ rte_eal_init(int argc, char **argv)
if (rte_eal_cpu_init() < 0) {
rte_eal_init_alert("Cannot detect lcores.");
rte_errno = ENOTSUP;
- return -1;
+ fctret = -1;
+ goto finished;
}
fctret = eal_parse_args(argc, argv);
@@ -841,27 +842,31 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("Invalid 'command line' arguments.");
rte_errno = EINVAL;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
if (eal_plugins_init() < 0) {
rte_eal_init_alert("Cannot init plugins\n");
rte_errno = EINVAL;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
if (eal_option_device_parse()) {
rte_errno = ENODEV;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
rte_config_init();
if (rte_eal_intr_init() < 0) {
rte_eal_init_alert("Cannot init interrupt-handling thread\n");
- return -1;
+ fctret = -1;
+ goto finished;
}
/* Put mp channel init before bus scan so that we can init the vdev
@@ -871,7 +876,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("failed to init mp channel\n");
if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
rte_errno = EFAULT;
- return -1;
+ fctret = -1;
+ goto finished;
}
}
@@ -879,7 +885,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("Cannot scan the buses for devices\n");
rte_errno = ENODEV;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
/* autodetect the iova mapping mode (default is iova_pa) */
@@ -903,7 +910,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("Cannot get hugepage information.");
rte_errno = EACCES;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
}
@@ -929,7 +937,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("Cannot init logging.");
rte_errno = ENOMEM;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
#ifdef VFIO_PRESENT
@@ -937,7 +946,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_init_alert("Cannot init VFIO\n");
rte_errno = EAGAIN;
rte_atomic32_clear(&run_once);
- return -1;
+ fctret = -1;
+ goto finished;
}
#endif
/* in secondary processes, memory init may allocate additional fbarrays
@@ -947,13 +957,15 @@ rte_eal_init(int argc, char **argv)
if (rte_eal_memzone_init() < 0) {
rte_eal_init_alert("Cannot init memzone\n");
rte_errno = ENODEV;
- return -1;
+ fctret = -1;
+ goto finished;
}
if (rte_eal_memory_init() < 0) {
rte_eal_init_alert("Cannot init memory\n");
rte_errno = ENOMEM;
- return -1;
+ fctret = -1;
+ goto finished;
}
/* the directories are locked during eal_hugepage_info_init */
@@ -962,25 +974,29 @@ rte_eal_init(int argc, char **argv)
if (rte_eal_malloc_heap_init() < 0) {
rte_eal_init_alert("Cannot init malloc heap\n");
rte_errno = ENODEV;
- return -1;
+ fctret = -1;
+ goto finished;
}
if (rte_eal_tailqs_init() < 0) {
rte_eal_init_alert("Cannot init tail queues for objects\n");
rte_errno = EFAULT;
- return -1;
+ fctret = -1;
+ goto finished;
}
if (rte_eal_alarm_init() < 0) {
rte_eal_init_alert("Cannot init interrupt-handling thread\n");
/* rte_eal_alarm_init sets rte_errno on failure. */
- return -1;
+ fctret = -1;
+ goto finished;
}
if (rte_eal_timer_init() < 0) {
rte_eal_init_alert("Cannot init HPET or TSC timers\n");
rte_errno = ENOTSUP;
- return -1;
+ fctret = -1;
+ goto finished;
}
eal_check_mem_on_local_socket();
@@ -1034,20 +1050,24 @@ rte_eal_init(int argc, char **argv)
if (ret) {
rte_eal_init_alert("rte_service_init() failed\n");
rte_errno = ENOEXEC;
- return -1;
+ fctret = -1;
+ goto finished;
}
/* Probe all the buses and devices/drivers on them */
if (rte_bus_probe()) {
rte_eal_init_alert("Cannot probe devices\n");
rte_errno = ENOTSUP;
- return -1;
+ fctret = -1;
+ goto finished;
}
#ifdef VFIO_PRESENT
/* Register mp action after probe() so that we got enough info */
- if (rte_vfio_is_enabled("vfio") && vfio_mp_sync_setup() < 0)
- return -1;
+ if (rte_vfio_is_enabled("vfio") && vfio_mp_sync_setup() < 0) {
+ fctret = -1;
+ goto finished;
+ }
#endif
/* initialize default service/lcore mappings and start running. Ignore
@@ -1056,11 +1076,14 @@ rte_eal_init(int argc, char **argv)
ret = rte_service_start_with_defaults();
if (ret < 0 && ret != -ENOTSUP) {
rte_errno = ENOEXEC;
- return -1;
+ fctret = -1;
+ goto finished;
}
rte_eal_mcfg_complete();
+finished:
+ free(logid);
return fctret;
}
--
2.14.3
next reply other threads:[~2018-07-22 10:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-22 10:55 Aaron Conole [this message]
2018-07-22 11:09 ` Aaron Conole
2018-07-22 11:16 ` [dpdk-dev] [PATCH v2] eal: free leaked storage Aaron Conole
2018-08-01 16:30 ` Thomas Monjalon
2018-08-01 16:51 ` Aaron Conole
2018-10-28 10:30 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180722105545.3916-1-aconole@redhat.com \
--to=aconole@redhat.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).