From: Juhamatti Kuusisaari <Juhamatti.Kuusisaari@coriant.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Subject: [dpdk-dev] [PATCH v6] net/pcap: physical interface MAC address support
Date: Mon, 10 Sep 2018 19:55:14 +0300 [thread overview]
Message-ID: <20180910165514.908-1-juhamatti.kuusisaari@coriant.com> (raw)
In-Reply-To: <20180906165613.25848-1-juhamatti.kuusisaari@coriant.com>
At the moment, PCAP interfaces use dummy MAC by default. This change
adds support for selecting PCAP physical interface MAC with phy_mac=1
devarg. This allows to setup packet flows using the physical interface
MAC.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
---
v6:
* Review changes:
* Clarified devarg applicability (applies to iface-only)
* Introduced detailed documentation for the devarg
* More checkpatches-fixes
v5-v3:
* FreeBSD related compilation and checkpatches-fixes
v2:
* FreeBSD support introduced
* Release notes added
v1:
* phy_mac=1 devarg support
---
doc/guides/nics/pcap_ring.rst | 9 ++
doc/guides/rel_notes/release_18_11.rst | 4 +
drivers/net/pcap/rte_eth_pcap.c | 120 +++++++++++++++++++++++--
3 files changed, 128 insertions(+), 5 deletions(-)
diff --git a/doc/guides/nics/pcap_ring.rst b/doc/guides/nics/pcap_ring.rst
index 879e5430f..604ca4300 100644
--- a/doc/guides/nics/pcap_ring.rst
+++ b/doc/guides/nics/pcap_ring.rst
@@ -96,6 +96,15 @@ The different stream types are:
iface=eth0
+Runtime Config Options
+^^^^^^^^^^^^^^^^^^^^^^
+
+- ``Use PCAP interface physical MAC``
+
+ In case ``iface=`` configuration is set, user may want to use the selected interface's physical MAC
+ address. This can be done with a ``devarg`` ``phy_mac``, for example::
+ iface=eth0,phy_mac=1
+
Examples of Usage
^^^^^^^^^^^^^^^^^
diff --git a/doc/guides/rel_notes/release_18_11.rst b/doc/guides/rel_notes/release_18_11.rst
index 3ae6b3f58..70966740a 100644
--- a/doc/guides/rel_notes/release_18_11.rst
+++ b/doc/guides/rel_notes/release_18_11.rst
@@ -54,6 +54,10 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Added a devarg to use PCAP interface physical MAC address.**
+ A new devarg ``phy_mac`` was introduced to allow users to use physical
+ MAC address of the selected PCAP interface.
+
API Changes
-----------
diff --git a/drivers/net/pcap/rte_eth_pcap.c b/drivers/net/pcap/rte_eth_pcap.c
index e8810a171..96ff61781 100644
--- a/drivers/net/pcap/rte_eth_pcap.c
+++ b/drivers/net/pcap/rte_eth_pcap.c
@@ -7,6 +7,14 @@
#include <time.h>
#include <net/if.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+#if defined(__FreeBSD__)
+#include <sys/sysctl.h>
+#include <net/if_dl.h>
+#endif
#include <pcap.h>
@@ -17,6 +25,7 @@
#include <rte_malloc.h>
#include <rte_mbuf.h>
#include <rte_bus_vdev.h>
+#include <rte_string_fns.h>
#define RTE_ETH_PCAP_SNAPSHOT_LEN 65535
#define RTE_ETH_PCAP_SNAPLEN ETHER_MAX_JUMBO_FRAME_LEN
@@ -29,6 +38,7 @@
#define ETH_PCAP_RX_IFACE_IN_ARG "rx_iface_in"
#define ETH_PCAP_TX_IFACE_ARG "tx_iface"
#define ETH_PCAP_IFACE_ARG "iface"
+#define ETH_PCAP_PHY_MAC_ARG "phy_mac"
#define ETH_PCAP_ARG_MAXLEN 64
@@ -87,6 +97,7 @@ static const char *valid_arguments[] = {
ETH_PCAP_RX_IFACE_IN_ARG,
ETH_PCAP_TX_IFACE_ARG,
ETH_PCAP_IFACE_ARG,
+ ETH_PCAP_PHY_MAC_ARG,
NULL
};
@@ -904,12 +915,80 @@ pmd_init_internals(struct rte_vdev_device *vdev,
return 0;
}
+static void
+eth_pcap_update_mac(const char *if_name, struct rte_eth_dev **eth_dev,
+ const unsigned int numa_node)
+{
+ void *mac_addrs;
+ struct ifreq ifr;
+
+ PMD_LOG(INFO, "Setting phy MAC for %s\n", if_name);
+#if !defined(__FreeBSD__)
+ int if_fd = socket(AF_INET, SOCK_DGRAM, 0);
+ if (if_fd == -1)
+ return;
+
+ strlcpy(ifr.ifr_name, if_name, sizeof(ifr.ifr_name));
+ if (!ioctl(if_fd, SIOCGIFHWADDR, &ifr)) {
+ mac_addrs = rte_zmalloc_socket(NULL, ETHER_ADDR_LEN,
+ 0, numa_node);
+ if (mac_addrs) {
+ (*eth_dev)->data->mac_addrs = mac_addrs;
+ rte_memcpy((*eth_dev)->data->mac_addrs,
+ ifr.ifr_addr.sa_data,
+ ETHER_ADDR_LEN);
+ }
+ }
+ close(if_fd);
+#elif defined(__FreeBSD__)
+ int mib[6];
+ size_t len = 0;
+ char *buf = NULL;
+
+ mib[0] = CTL_NET;
+ mib[1] = AF_ROUTE;
+ mib[2] = 0;
+ mib[3] = AF_LINK;
+ mib[4] = NET_RT_IFLIST;
+ mib[5] = if_nametoindex(if_name);
+
+ if (sysctl(mib, 6, NULL, &len, NULL, 0) < 0)
+ return;
+
+ if (len > 0) {
+ struct if_msghdr *ifm;
+ struct sockaddr_dl *sdl;
+
+ buf = rte_malloc(NULL, len, 0);
+ if (buf) {
+ if (sysctl(mib, 6, buf, &len, NULL, 0) < 0) {
+ rte_free(buf);
+ return;
+ }
+
+ ifm = (struct if_msghdr *)buf;
+ sdl = (struct sockaddr_dl *)(ifm + 1);
+ mac_addrs = rte_zmalloc_socket(NULL, ETHER_ADDR_LEN,
+ 0, numa_node);
+ if (mac_addrs) {
+ (*eth_dev)->data->mac_addrs = mac_addrs;
+ rte_memcpy((*eth_dev)->data->mac_addrs,
+ LLADDR(sdl),
+ ETHER_ADDR_LEN);
+ }
+ }
+ }
+ if (buf)
+ rte_free(buf);
+#endif
+}
+
static int
eth_from_pcaps_common(struct rte_vdev_device *vdev,
struct pmd_devargs *rx_queues, const unsigned int nb_rx_queues,
struct pmd_devargs *tx_queues, const unsigned int nb_tx_queues,
struct rte_kvargs *kvlist, struct pmd_internals **internals,
- struct rte_eth_dev **eth_dev)
+ const int phy_mac, struct rte_eth_dev **eth_dev)
{
struct rte_kvargs_pair *pair = NULL;
unsigned int k_idx;
@@ -955,6 +1034,10 @@ eth_from_pcaps_common(struct rte_vdev_device *vdev,
else
(*internals)->if_index = if_nametoindex(pair->value);
+ if (phy_mac && pair) /* phy_mac arg is applied only to iface */
+ eth_pcap_update_mac(pair->value, eth_dev,
+ vdev->device.numa_node);
+
return 0;
}
@@ -962,7 +1045,7 @@ static int
eth_from_pcaps(struct rte_vdev_device *vdev,
struct pmd_devargs *rx_queues, const unsigned int nb_rx_queues,
struct pmd_devargs *tx_queues, const unsigned int nb_tx_queues,
- struct rte_kvargs *kvlist, int single_iface,
+ struct rte_kvargs *kvlist, int single_iface, int phy_mac,
unsigned int using_dumpers)
{
struct pmd_internals *internals = NULL;
@@ -970,7 +1053,8 @@ eth_from_pcaps(struct rte_vdev_device *vdev,
int ret;
ret = eth_from_pcaps_common(vdev, rx_queues, nb_rx_queues,
- tx_queues, nb_tx_queues, kvlist, &internals, ð_dev);
+ tx_queues, nb_tx_queues, kvlist,
+ &internals, phy_mac, ð_dev);
if (ret < 0)
return ret;
@@ -989,6 +1073,19 @@ eth_from_pcaps(struct rte_vdev_device *vdev,
return 0;
}
+static int
+select_phy_mac(const char *key, const char *value, void *extra_args)
+{
+ if (extra_args) {
+ const int phy_mac = atoi(value);
+ int *enable_phy_mac = extra_args;
+
+ if (phy_mac)
+ *enable_phy_mac = 1;
+ }
+ return 0;
+}
+
static int
pmd_pcap_probe(struct rte_vdev_device *dev)
{
@@ -999,6 +1096,7 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
struct pmd_devargs dumpers = {0};
struct rte_eth_dev *eth_dev;
int single_iface = 0;
+ int phy_mac = 0;
int ret;
name = rte_vdev_device_name(dev);
@@ -1031,6 +1129,16 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
* reading / writing
*/
if (rte_kvargs_count(kvlist, ETH_PCAP_IFACE_ARG) == 1) {
+ /*
+ * We check first whether we want to use phy MAC of the PCAP
+ * interface.
+ */
+ if (rte_kvargs_count(kvlist, ETH_PCAP_PHY_MAC_ARG)) {
+ ret = rte_kvargs_process(kvlist, ETH_PCAP_PHY_MAC_ARG,
+ &select_phy_mac, &phy_mac);
+ if (ret < 0)
+ goto free_kvlist;
+ }
ret = rte_kvargs_process(kvlist, ETH_PCAP_IFACE_ARG,
&open_rx_tx_iface, &pcaps);
@@ -1084,7 +1192,8 @@ pmd_pcap_probe(struct rte_vdev_device *dev)
create_eth:
ret = eth_from_pcaps(dev, &pcaps, pcaps.num_of_queue, &dumpers,
- dumpers.num_of_queue, kvlist, single_iface, is_tx_pcap);
+ dumpers.num_of_queue, kvlist, single_iface,
+ phy_mac, is_tx_pcap);
free_kvlist:
rte_kvargs_free(kvlist);
@@ -1128,7 +1237,8 @@ RTE_PMD_REGISTER_PARAM_STRING(net_pcap,
ETH_PCAP_RX_IFACE_ARG "=<ifc> "
ETH_PCAP_RX_IFACE_IN_ARG "=<ifc> "
ETH_PCAP_TX_IFACE_ARG "=<ifc> "
- ETH_PCAP_IFACE_ARG "=<ifc>");
+ ETH_PCAP_IFACE_ARG "=<ifc> "
+ ETH_PCAP_PHY_MAC_ARG "=<int>");
RTE_INIT(eth_pcap_init_log)
{
--
2.17.1
next prev parent reply other threads:[~2018-09-10 16:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-06 16:56 [dpdk-dev] [PATCH v5] " Juhamatti Kuusisaari
2018-09-10 12:03 ` Ferruh Yigit
2018-09-10 17:20 ` Kuusisaari, Juhamatti (Coriant - FI/Espoo)
2018-09-10 16:55 ` Juhamatti Kuusisaari [this message]
2018-09-11 15:35 ` [dpdk-dev] [PATCH v6] " Ferruh Yigit
2018-10-01 7:30 ` Kuusisaari, Juhamatti (Coriant - FI/Espoo)
2018-10-05 20:27 ` [dpdk-dev] [PATCH v7] " Ferruh Yigit
2018-10-06 0:49 ` [dpdk-dev] [PATCH v8] " Ferruh Yigit
2018-10-08 12:14 ` Ferruh Yigit
2018-10-09 4:30 ` Kuusisaari, Juhamatti (Infinera - FI/Espoo)
2018-10-09 12:04 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180910165514.908-1-juhamatti.kuusisaari@coriant.com \
--to=juhamatti.kuusisaari@coriant.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).