From: "Gaëtan Rivet" <gaetan.rivet@6wind.com>
To: Raslan Darawsheh <rasland@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
Thomas Monjalon <thomas@monjalon.net>,
"stephen@networkplumber.org" <stephen@networkplumber.org>
Subject: Re: [dpdk-dev] [PATCH v2 2/4] net/failsafe: change back-reference from sub-device
Date: Tue, 5 Mar 2019 17:48:54 +0100 [thread overview]
Message-ID: <20190305164854.2e5lb6o3j23vkpl3@bidouze.vm.6wind.com> (raw)
In-Reply-To: <1551779507-10857-2-git-send-email-rasland@mellanox.com>
Beside the squash referenced in p1,
On Tue, Mar 05, 2019 at 09:52:05AM +0000, Raslan Darawsheh wrote:
> In multiprocess context, the sub-device structure is shared
> between processes. The reference to the failsafe device was
> a per process pointer. It's changed to port id which is the
> same for all processes.
>
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> ---
> v2: changed macro to an inline function
> ---
> drivers/net/failsafe/failsafe_eal.c | 2 +-
> drivers/net/failsafe/failsafe_ether.c | 15 ++++++++-------
> drivers/net/failsafe/failsafe_intr.c | 10 +++++-----
> drivers/net/failsafe/failsafe_private.h | 13 ++++++++++---
> 4 files changed, 24 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
> index 8a888b1..56d1669 100644
> --- a/drivers/net/failsafe/failsafe_eal.c
> +++ b/drivers/net/failsafe/failsafe_eal.c
> @@ -114,7 +114,7 @@ fs_bus_init(struct rte_eth_dev *dev)
> }
> ETH(sdev) = &rte_eth_devices[pid];
> SUB_ID(sdev) = i;
> - sdev->fs_dev = dev;
> + sdev->fs_port_id = dev->data->port_id;
> sdev->dev = ETH(sdev)->device;
> sdev->state = DEV_PROBED;
> }
> diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
> index 1783165..d5b1488 100644
> --- a/drivers/net/failsafe/failsafe_ether.c
> +++ b/drivers/net/failsafe/failsafe_ether.c
> @@ -298,7 +298,7 @@ fs_dev_remove(struct sub_device *sdev)
> break;
> }
> sdev->remove = 0;
> - failsafe_hotplug_alarm_install(sdev->fs_dev);
> + failsafe_hotplug_alarm_install(fsdev_from_subdev(sdev));
> }
>
> static void
> @@ -318,8 +318,9 @@ fs_dev_stats_save(struct sub_device *sdev)
> WARN("Using latest snapshot taken before %"PRIu64" seconds.\n",
> (rte_rdtsc() - timestamp) / rte_get_tsc_hz());
> }
> - failsafe_stats_increment(&PRIV(sdev->fs_dev)->stats_accumulator,
> - err ? &sdev->stats_snapshot.stats : &stats);
> + failsafe_stats_increment
> + (&PRIV(fsdev_from_subdev(sdev))->stats_accumulator,
> + err ? &sdev->stats_snapshot.stats : &stats);
> memset(&sdev->stats_snapshot, 0, sizeof(sdev->stats_snapshot));
> }
>
> @@ -566,17 +567,17 @@ failsafe_eth_rmv_event_callback(uint16_t port_id __rte_unused,
> {
> struct sub_device *sdev = cb_arg;
>
> - fs_lock(sdev->fs_dev, 0);
> + fs_lock(fsdev_from_subdev(sdev), 0);
> /* Switch as soon as possible tx_dev. */
> - fs_switch_dev(sdev->fs_dev, sdev);
> + fs_switch_dev(fsdev_from_subdev(sdev), sdev);
> /* Use safe bursts in any case. */
> - failsafe_set_burst_fn(sdev->fs_dev, 1);
> + failsafe_set_burst_fn(fsdev_from_subdev(sdev), 1);
> /*
> * Async removal, the sub-PMD will try to unregister
> * the callback at the source of the current thread context.
> */
> sdev->remove = 1;
> - fs_unlock(sdev->fs_dev, 0);
> + fs_unlock(fsdev_from_subdev(sdev), 0);
> return 0;
> }
>
> diff --git a/drivers/net/failsafe/failsafe_intr.c b/drivers/net/failsafe/failsafe_intr.c
> index 09aa3c6..d372d09 100644
> --- a/drivers/net/failsafe/failsafe_intr.c
> +++ b/drivers/net/failsafe/failsafe_intr.c
> @@ -274,14 +274,14 @@ failsafe_eth_rx_intr_ctl_subdevice(struct sub_device *sdev, int op)
> int rc;
> int ret = 0;
>
> + fsdev = fsdev_from_subdev(sdev);
> if (sdev == NULL || (ETH(sdev) == NULL) ||
> - sdev->fs_dev == NULL || (PRIV(sdev->fs_dev) == NULL)) {
> + fsdev == NULL || (PRIV(fsdev) == NULL)) {
> ERROR("Called with invalid arguments");
> return -EINVAL;
> }
> dev = ETH(sdev);
> - fsdev = sdev->fs_dev;
> - epfd = PRIV(sdev->fs_dev)->rxp.efd;
> + epfd = PRIV(fsdev)->rxp.efd;
> pid = PORT_ID(sdev);
>
> if (epfd <= 0) {
> @@ -330,7 +330,7 @@ int failsafe_rx_intr_install_subdevice(struct sub_device *sdev)
> const struct rte_intr_conf *const intr_conf =
> Ð(sdev)->data->dev_conf.intr_conf;
>
> - fsdev = sdev->fs_dev;
> + fsdev = fsdev_from_subdev(sdev);
> rxq = (struct rxq **)fsdev->data->rx_queues;
> if (intr_conf->rxq == 0)
> return 0;
> @@ -368,7 +368,7 @@ void failsafe_rx_intr_uninstall_subdevice(struct sub_device *sdev)
> struct rte_eth_dev *fsdev;
> struct rxq *fsrxq;
>
> - fsdev = sdev->fs_dev;
> + fsdev = fsdev_from_subdev(sdev);
> for (qid = 0; qid < ETH(sdev)->data->nb_rx_queues; qid++) {
> if (qid < fsdev->data->nb_rx_queues) {
> fsrxq = fsdev->data->rx_queues[qid];
> diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
> index 29dfd40..84e847f 100644
> --- a/drivers/net/failsafe/failsafe_private.h
> +++ b/drivers/net/failsafe/failsafe_private.h
> @@ -117,7 +117,7 @@ struct sub_device {
> /* Others are retrieved through a file descriptor */
> char *fd_str;
> /* fail-safe device backreference */
> - struct rte_eth_dev *fs_dev;
> + uint16_t fs_port_id; /* shared between processes*/
> /* flag calling for recollection */
> volatile unsigned int remove:1;
> /* flow isolation state */
> @@ -324,7 +324,8 @@ extern int failsafe_mac_from_arg;
> */
> #define FS_ATOMIC_RX(s, i) \
> rte_atomic64_read( \
> - &((struct rxq *)((s)->fs_dev->data->rx_queues[i]))->refcnt[(s)->sid] \
> + &((struct rxq *) \
> + (fsdev_from_subdev(s)->data->rx_queues[i]))->refcnt[(s)->sid] \
> )
> /**
> * s: (struct sub_device *)
> @@ -332,7 +333,8 @@ extern int failsafe_mac_from_arg;
> */
> #define FS_ATOMIC_TX(s, i) \
> rte_atomic64_read( \
> - &((struct txq *)((s)->fs_dev->data->tx_queues[i]))->refcnt[(s)->sid] \
> + &((struct txq *) \
> + (fsdev_from_subdev(s)->data->tx_queues[i]))->refcnt[(s)->sid] \
> )
>
> #ifdef RTE_EXEC_ENV_BSDAPP
> @@ -379,6 +381,11 @@ fs_find_next(struct rte_eth_dev *dev,
> return &subs[sid];
> }
>
> +static inline struct rte_eth_dev *
> +fsdev_from_subdev(struct sub_device *sdev) {
> + return &rte_eth_devices[sdev->fs_port_id];
> +}
> +
Using a static inline that already enforce parameter type makes the
_from_subdev suffix redundant.
I think
fs_dev(struct sub_device *sdev);
would be more readable in most of the changes above, while keeping with
the fs_ prefix used in all static failsafe functions.
> /*
> * Lock hot-plug mutex.
> * is_alarm means that the caller is, for sure, the hot-plug alarm mechanism.
> --
> 2.7.4
>
--
Gaëtan Rivet
6WIND
next prev parent reply other threads:[~2019-03-05 16:48 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 9:52 [dpdk-dev] [PATCH v2 1/4] net/failsafe: replace local device with shared data Raslan Darawsheh
2019-03-05 9:52 ` [dpdk-dev] [PATCH v2 3/4] net/failsafe: replace local sub-device " Raslan Darawsheh
2019-03-05 9:59 ` Thomas Monjalon
2019-03-05 17:38 ` Gaëtan Rivet
2019-03-05 17:58 ` Thomas Monjalon
2019-03-06 10:46 ` Gaëtan Rivet
2019-03-06 18:02 ` Thomas Monjalon
2019-03-07 8:43 ` Raslan Darawsheh
2019-03-07 9:47 ` Gaëtan Rivet
2019-03-07 11:34 ` Raslan Darawsheh
2019-03-07 11:50 ` Gaëtan Rivet
2019-03-05 9:52 ` [dpdk-dev] [PATCH v2 2/4] net/failsafe: change back-reference from sub-device Raslan Darawsheh
2019-03-05 16:48 ` Gaëtan Rivet [this message]
2019-03-07 9:01 ` Raslan Darawsheh
2019-03-07 9:43 ` Gaëtan Rivet
2019-03-05 9:52 ` [dpdk-dev] [PATCH v2 4/4] net/failsafe: support secondary process Raslan Darawsheh
2019-03-05 16:43 ` [dpdk-dev] [PATCH v2 1/4] net/failsafe: replace local device with shared data Gaëtan Rivet
2019-03-05 17:40 ` Gaëtan Rivet
2019-03-05 17:41 ` Thomas Monjalon
2019-03-18 16:05 ` [dpdk-dev] [PATCH v3 0/4] support secondary process for failsafe Raslan Darawsheh
2019-03-18 16:05 ` Raslan Darawsheh
2019-03-18 16:05 ` [dpdk-dev] [PATCH v3 1/4] net/failsafe: replace local device with shared data Raslan Darawsheh
2019-03-18 16:05 ` Raslan Darawsheh
2019-03-18 16:05 ` [dpdk-dev] [PATCH v3 2/4] net/failsafe: change back-reference from sub-device Raslan Darawsheh
2019-03-18 16:05 ` Raslan Darawsheh
2019-03-18 16:05 ` [dpdk-dev] [PATCH v3 3/4] net/failsafe: replace sub-device pointer with port id Raslan Darawsheh
2019-03-18 16:05 ` Raslan Darawsheh
2019-03-18 16:05 ` [dpdk-dev] [PATCH v3 4/4] net/failsafe: support secondary process Raslan Darawsheh
2019-03-18 16:05 ` Raslan Darawsheh
2019-03-18 16:16 ` [dpdk-dev] [PATCH v3 0/4] support secondary process for failsafe Gaëtan Rivet
2019-03-18 16:16 ` Gaëtan Rivet
2019-03-27 14:08 ` Ferruh Yigit
2019-03-27 14:08 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190305164854.2e5lb6o3j23vkpl3@bidouze.vm.6wind.com \
--to=gaetan.rivet@6wind.com \
--cc=dev@dpdk.org \
--cc=rasland@mellanox.com \
--cc=stephen@networkplumber.org \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).