DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ye Xiaolong <xiaolong.ye@intel.com>
To: "Mattias Rönnblom" <hofors@lysator.liu.se>
Cc: dev@dpdk.org, Qi Zhang <qi.z.zhang@intel.com>,
	Karlsson Magnus <magnus.karlsson@intel.com>,
	Topel Bjorn <bjorn.topel@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 1/6] net/af_xdp: introduce AF XDP PMD driver
Date: Tue, 19 Mar 2019 17:49:42 +0800	[thread overview]
Message-ID: <20190319094942.GB16135@intel.com> (raw)
Message-ID: <20190319094942.5QGDzqU2PXkJaSVBG2tift5LCIaLr6wLXCgFqnJGmfw@z> (raw)
In-Reply-To: <ab579028-9eef-b849-9681-b0371258be33@lysator.liu.se>

Hi, Mattias

Thanks for your comments.

On 03/19, Mattias Rönnblom wrote:
>On 2019-03-19 08:12, Xiaolong Ye wrote:
>> Add a new PMD driver for AF_XDP which is a proposed faster version of
>> AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
>> [2].
>> 
>> This is the vanilla version PMD which just uses a raw buffer registered as
>> the umem.
>> 
>> [1] https://fosdem.org/2018/schedule/event/af_xdp/
>> [2] https://lwn.net/Articles/745934/
>> 
>> Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
>> ---
>>   MAINTAINERS                                   |   6 +
>>   config/common_base                            |   5 +
>>   config/common_linux                           |   1 +
>>   doc/guides/nics/af_xdp.rst                    |  45 +
>>   doc/guides/nics/features/af_xdp.ini           |  11 +
>>   doc/guides/nics/index.rst                     |   1 +
>>   doc/guides/rel_notes/release_19_05.rst        |   7 +
>>   drivers/net/Makefile                          |   1 +
>>   drivers/net/af_xdp/Makefile                   |  33 +
>>   drivers/net/af_xdp/meson.build                |  21 +
>>   drivers/net/af_xdp/rte_eth_af_xdp.c           | 930 ++++++++++++++++++
>>   drivers/net/af_xdp/rte_pmd_af_xdp_version.map |   3 +
>>   drivers/net/meson.build                       |   1 +
>>   mk/rte.app.mk                                 |   1 +
>>   14 files changed, 1066 insertions(+)
>>   create mode 100644 doc/guides/nics/af_xdp.rst
>>   create mode 100644 doc/guides/nics/features/af_xdp.ini
>>   create mode 100644 drivers/net/af_xdp/Makefile
>>   create mode 100644 drivers/net/af_xdp/meson.build
>>   create mode 100644 drivers/net/af_xdp/rte_eth_af_xdp.c
>>   create mode 100644 drivers/net/af_xdp/rte_pmd_af_xdp_version.map
>> 
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 452b8eb82..1cc54b439 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -468,6 +468,12 @@ M: John W. Linville <linville@tuxdriver.com>
>>   F: drivers/net/af_packet/
>>   F: doc/guides/nics/features/afpacket.ini
>> +Linux AF_XDP
>> +M: Xiaolong Ye <xiaolong.ye@intel.com>
>> +M: Qi Zhang <qi.z.zhang@intel.com>
>> +F: drivers/net/af_xdp/
>> +F: doc/guides/nics/features/af_xdp.rst
>> +
>>   Amazon ENA
>>   M: Marcin Wojtas <mw@semihalf.com>
>>   M: Michal Krawczyk <mk@semihalf.com>
>> diff --git a/config/common_base b/config/common_base
>> index 0b09a9348..4044de205 100644
>> --- a/config/common_base
>> +++ b/config/common_base
>> @@ -416,6 +416,11 @@ CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
>>   #
>>   CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
>> +#
>> +# Compile software PMD backed by AF_XDP sockets (Linux only)
>> +#
>> +CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
>> +
>>   #
>>   # Compile link bonding PMD library
>>   #
>> diff --git a/config/common_linux b/config/common_linux
>> index 75334273d..0b1249da0 100644
>> --- a/config/common_linux
>> +++ b/config/common_linux
>> @@ -19,6 +19,7 @@ CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
>>   CONFIG_RTE_LIBRTE_PMD_VHOST=y
>>   CONFIG_RTE_LIBRTE_IFC_PMD=y
>>   CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
>> +CONFIG_RTE_LIBRTE_PMD_AF_XDP=y
>>   CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
>>   CONFIG_RTE_LIBRTE_PMD_TAP=y
>>   CONFIG_RTE_LIBRTE_AVP_PMD=y
>> diff --git a/doc/guides/nics/af_xdp.rst b/doc/guides/nics/af_xdp.rst
>> new file mode 100644
>> index 000000000..dd5654dd1
>> --- /dev/null
>> +++ b/doc/guides/nics/af_xdp.rst
>> @@ -0,0 +1,45 @@
>> +..  SPDX-License-Identifier: BSD-3-Clause
>> +    Copyright(c) 2018 Intel Corporation.
>> +
>> +AF_XDP Poll Mode Driver
>> +==========================
>> +
>> +AF_XDP is an address family that is optimized for high performance
>> +packet processing. AF_XDP sockets enable the possibility for XDP program to
>> +redirect packets to a memory buffer in userspace.
>> +
>> +For the full details behind AF_XDP socket, you can refer to
>> +`AF_XDP documentation in the Kernel
>> +<https://www.kernel.org/doc/Documentation/networking/af_xdp.rst>`_.
>> +
>> +This Linux-specific PMD driver creates the AF_XDP socket and binds it to a
>> +specific netdev queue, it allows a DPDK application to send and receive raw
>> +packets through the socket which would bypass the kernel network stack.
>> +Current implementation only supports single queue, multi-queues feature will
>> +be added later.
>> +
>> +Options
>> +-------
>> +
>> +The following options can be provided to set up an af_xdp port in DPDK.
>> +
>> +*   ``iface`` - name of the Kernel interface to attach to (required);
>> +*   ``queue`` - netdev queue id (optional, default 0);
>> +
>> +Prerequisites
>> +-------------
>> +
>> +This is a Linux-specific PMD, thus the following prerequisites apply:
>> +
>> +*  A Linux Kernel (version > 4.18) with XDP sockets configuration enabled;
>> +*  libbpf (within kernel version > 5.1) with latest af_xdp support installed
>> +*  A Kernel bound interface to attach to.
>> +
>> +Set up an af_xdp interface
>> +-----------------------------
>> +
>> +The following example will set up an af_xdp interface in DPDK:
>> +
>> +.. code-block:: console
>> +
>> +    --vdev eth_af_xdp,iface=ens786f1,queue=0
>> diff --git a/doc/guides/nics/features/af_xdp.ini b/doc/guides/nics/features/af_xdp.ini
>> new file mode 100644
>> index 000000000..7b8fcce00
>> --- /dev/null
>> +++ b/doc/guides/nics/features/af_xdp.ini
>> @@ -0,0 +1,11 @@
>> +;
>> +; Supported features of the 'af_xdp' network poll mode driver.
>> +;
>> +; Refer to default.ini for the full list of available PMD features.
>> +;
>> +[Features]
>> +Link status          = Y
>> +MTU update           = Y
>> +Promiscuous mode     = Y
>> +Stats per queue      = Y
>> +x86-64               = Y
>> \ No newline at end of file
>> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
>> index 5c80e3baa..a4b80a3d0 100644
>> --- a/doc/guides/nics/index.rst
>> +++ b/doc/guides/nics/index.rst
>> @@ -12,6 +12,7 @@ Network Interface Controller Drivers
>>       features
>>       build_and_test
>>       af_packet
>> +    af_xdp
>>       ark
>>       atlantic
>>       avp
>> diff --git a/doc/guides/rel_notes/release_19_05.rst b/doc/guides/rel_notes/release_19_05.rst
>> index 61a2c7383..062facf89 100644
>> --- a/doc/guides/rel_notes/release_19_05.rst
>> +++ b/doc/guides/rel_notes/release_19_05.rst
>> @@ -65,6 +65,13 @@ New Features
>>       process.
>>     * Added support for Rx packet types list in a secondary process.
>> +* **Added the AF_XDP PMD.**
>> +
>> +  Added a Linux-specific PMD driver for AF_XDP, it can create the AF_XDP socket
>> +  and bind it to a specific netdev queue, it allows a DPDK application to send
>> +  and receive raw packets through the socket which would bypass the kernel
>> +  network stack to achieve high performance packet processing.
>> +
>>   * **Updated Mellanox drivers.**
>>      New features and improvements were done in mlx4 and mlx5 PMDs:
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 502869a87..5d401b8c5 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -9,6 +9,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD),d)
>>   endif
>>   DIRS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += af_packet
>> +DIRS-$(CONFIG_RTE_LIBRTE_PMD_AF_XDP) += af_xdp
>>   DIRS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += ark
>>   DIRS-$(CONFIG_RTE_LIBRTE_ATLANTIC_PMD) += atlantic
>>   DIRS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += avp
>> diff --git a/drivers/net/af_xdp/Makefile b/drivers/net/af_xdp/Makefile
>> new file mode 100644
>> index 000000000..6cf0ed7db
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/Makefile
>> @@ -0,0 +1,33 @@
>> +# SPDX-License-Identifier: BSD-3-Clause
>> +# Copyright(c) 2018 Intel Corporation
>> +
>> +include $(RTE_SDK)/mk/rte.vars.mk
>> +
>> +#
>> +# library name
>> +#
>> +LIB = librte_pmd_af_xdp.a
>> +
>> +EXPORT_MAP := rte_pmd_af_xdp_version.map
>> +
>> +LIBABIVER := 1
>> +
>> +CFLAGS += -O3
>> +
>> +# require kernel version >= v5.1-rc1
>> +LINUX_VERSION := $(shell uname -r)
>> +CFLAGS += -I/lib/modules/$(LINUX_VERSION)/build/tools/include
>> +CFLAGS += -I/lib/modules/$(LINUX_VERSION)/build/tools/lib/bpf
>> +
>> +CFLAGS += $(WERROR_FLAGS)
>> +LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
>> +LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
>> +LDLIBS += -lrte_bus_vdev
>> +LDLIBS += -lbpf
>> +
>> +#
>> +# all source are stored in SRCS-y
>> +#
>> +SRCS-$(CONFIG_RTE_LIBRTE_PMD_AF_XDP) += rte_eth_af_xdp.c
>> +
>> +include $(RTE_SDK)/mk/rte.lib.mk
>> diff --git a/drivers/net/af_xdp/meson.build b/drivers/net/af_xdp/meson.build
>> new file mode 100644
>> index 000000000..635e67483
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/meson.build
>> @@ -0,0 +1,21 @@
>> +# SPDX-License-Identifier: BSD-3-Clause
>> +# Copyright(c) 2018 Intel Corporation
>> +
>> +if host_machine.system() != 'linux'
>> +	build = false
>> +endif
>> +
>> +bpf_dep = dependency('libbpf', required: false)
>> +if bpf_dep.found()
>> +	build = true
>> +else
>> +	bpf_dep = cc.find_library('libbpf', required: false)
>> +	if bpf_dep.found() and cc.has_header('xsk.h', dependencies: bpf_dep)
>> +		build = true
>> +		pkgconfig_extra_libs += '-lbpf'
>> +	else
>> +		build = false
>> +	endif
>> +endif
>> +sources = files('rte_eth_af_xdp.c')
>> +ext_deps += bpf_dep
>> diff --git a/drivers/net/af_xdp/rte_eth_af_xdp.c b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> new file mode 100644
>> index 000000000..96dedc0c4
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/rte_eth_af_xdp.c
>> @@ -0,0 +1,930 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(c) 2019 Intel Corporation.
>> + */
>> +
>> +#include <rte_mbuf.h>
>> +#include <rte_ethdev_driver.h>
>> +#include <rte_ethdev_vdev.h>
>> +#include <rte_malloc.h>
>> +#include <rte_kvargs.h>
>> +#include <rte_bus_vdev.h>
>> +#include <rte_string_fns.h>
>> +
>> +#include <linux/if_ether.h>
>> +#include <linux/if_xdp.h>
>> +#include <linux/if_link.h>
>> +#include <asm/barrier.h>
>
>Is this include used?

Yes, this is needed by xsk.h below which calls smp_wmb() & smp_rmb().

>
>> +#include <arpa/inet.h>
>> +#include <net/if.h>
>> +#include <sys/types.h>
>> +#include <sys/socket.h>
>> +#include <sys/ioctl.h>
>> +#include <sys/mman.h>
>> +#include <unistd.h>
>> +#include <poll.h>
>> +#include <bpf/bpf.h>
>> +#include <xsk.h>
>> +
>> +#define RTE_LOGTYPE_AF_XDP RTE_LOGTYPE_USER1
>> +#ifndef SOL_XDP
>> +#define SOL_XDP 283
>> +#endif
>> +
>> +#ifndef AF_XDP
>> +#define AF_XDP 44
>> +#endif
>> +
>> +#ifndef PF_XDP
>> +#define PF_XDP AF_XDP
>> +#endif
>> +
>> +#define ETH_AF_XDP_IFACE_ARG			"iface"
>> +#define ETH_AF_XDP_QUEUE_IDX_ARG		"queue"
>> +
>> +#define ETH_AF_XDP_FRAME_SIZE		XSK_UMEM__DEFAULT_FRAME_SIZE
>> +#define ETH_AF_XDP_NUM_BUFFERS		4096
>> +#define ETH_AF_XDP_DATA_HEADROOM	0
>> +#define ETH_AF_XDP_DFLT_NUM_DESCS	XSK_RING_CONS__DEFAULT_NUM_DESCS
>> +#define ETH_AF_XDP_DFLT_QUEUE_IDX	0
>> +
>> +#define ETH_AF_XDP_RX_BATCH_SIZE	32
>> +#define ETH_AF_XDP_TX_BATCH_SIZE	32
>> +
>> +#define ETH_AF_XDP_MAX_QUEUE_PAIRS     16
>> +
>> +struct xsk_umem_info {
>> +	struct xsk_ring_prod fq;
>> +	struct xsk_ring_cons cq;
>> +	struct xsk_umem *umem;
>> +	struct rte_ring *buf_ring;
>> +	void *buffer;
>> +};
>> +
>> +struct pkt_rx_queue {
>> +	struct xsk_ring_cons rx;
>> +	struct xsk_umem_info *umem;
>> +	struct xsk_socket *xsk;
>> +	struct rte_mempool *mb_pool;
>> +
>> +	uint64_t rx_pkts;
>> +	uint64_t rx_bytes;
>> +	uint64_t rx_dropped;
>> +
>> +	struct pkt_tx_queue *pair;
>> +	uint16_t queue_idx;
>> +};
>> +
>> +struct pkt_tx_queue {
>> +	struct xsk_ring_prod tx;
>> +
>> +	uint64_t tx_pkts;
>> +	uint64_t err_pkts;
>> +	uint64_t tx_bytes;
>> +
>> +	struct pkt_rx_queue *pair;
>> +	uint16_t queue_idx;
>> +};
>> +
>> +struct pmd_internals {
>> +	int if_index;
>> +	char if_name[IFNAMSIZ];
>> +	uint16_t queue_idx;
>> +	struct ether_addr eth_addr;
>> +	struct xsk_umem_info *umem;
>> +	struct rte_mempool *mb_pool_share;
>> +
>> +	struct pkt_rx_queue rx_queues[ETH_AF_XDP_MAX_QUEUE_PAIRS];
>> +	struct pkt_tx_queue tx_queues[ETH_AF_XDP_MAX_QUEUE_PAIRS];
>> +};
>> +
>> +static const char * const valid_arguments[] = {
>> +	ETH_AF_XDP_IFACE_ARG,
>> +	ETH_AF_XDP_QUEUE_IDX_ARG,
>> +	NULL
>> +};
>> +
>> +static struct rte_eth_link pmd_link = {
>> +	.link_speed = ETH_SPEED_NUM_10G,
>> +	.link_duplex = ETH_LINK_FULL_DUPLEX,
>> +	.link_status = ETH_LINK_DOWN,
>> +	.link_autoneg = ETH_LINK_AUTONEG
>> +};
>> +
>> +static inline int
>> +reserve_fill_queue(struct xsk_umem_info *umem, int reserve_size)
>> +{
>> +	struct xsk_ring_prod *fq = &umem->fq;
>> +	uint32_t idx;
>> +	void *addr = NULL;
>> +	int i, ret = 0;
>
>No need to initialize 'ret'. Is there a point to set 'addr'?

Ok, I'll keep it uninitialized.
addr needs be set otherwise there would be a build error:

drivers/net/af_xdp/rte_eth_af_xdp.c:129:40: error: ‘addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   *xsk_ring_prod__fill_addr(fq, idx++) = (uint64_t)addr;
                                        ^
>
>> +
>> +	ret = xsk_ring_prod__reserve(fq, reserve_size, &idx);
>> +	if (!ret) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to reserve enough fq descs.\n");
>> +		return ret;
>> +	}
>> +
>> +	for (i = 0; i < reserve_size; i++) {
>> +		rte_ring_dequeue(umem->buf_ring, &addr);
>> +		*xsk_ring_prod__fill_addr(fq, idx++) = (uint64_t)addr;
>
>Consider introducing a tmp variable to make this more readable.

Got it.

>
>> +	}
>> +
>> +	xsk_ring_prod__submit(fq, reserve_size);
>> +
>> +	return 0;
>> +}
>> +
>> +static uint16_t
>> +eth_af_xdp_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
>> +{
>> +	struct pkt_rx_queue *rxq = queue;
>> +	struct xsk_ring_cons *rx = &rxq->rx;
>> +	struct xsk_umem_info *umem = rxq->umem;
>> +	struct xsk_ring_prod *fq = &umem->fq;
>> +	uint32_t idx_rx;
>> +	uint32_t free_thresh = fq->size >> 1;
>> +	struct rte_mbuf *mbuf;
>> +	unsigned long dropped = 0;
>> +	unsigned long rx_bytes = 0;
>> +	uint16_t count = 0;
>> +	int rcvd, i;
>> +
>> +	nb_pkts = nb_pkts < ETH_AF_XDP_RX_BATCH_SIZE ?
>> +		nb_pkts : ETH_AF_XDP_RX_BATCH_SIZE;
>> +
>> +	rcvd = xsk_ring_cons__peek(rx, nb_pkts, &idx_rx); > +	if (!rcvd)
>
>Since peek returns the number of entries, not a boolean, do:
>rcvd == 0

Got it.

>
>> +		return 0;
>> +
>> +	if (xsk_prod_nb_free(fq, free_thresh) >= free_thresh)
>> +		(void)reserve_fill_queue(umem, ETH_AF_XDP_RX_BATCH_SIZE);
>> +
>> +	for (i = 0; i < rcvd; i++) {
>> +		uint64_t addr = xsk_ring_cons__rx_desc(rx, idx_rx)->addr;
>> +		uint32_t len = xsk_ring_cons__rx_desc(rx, idx_rx++)->len;
>
>Use a tmp variable, instead of two calls.

Got it.

>
>> +		char *pkt = xsk_umem__get_data(rxq->umem->buffer, addr);
>> +
>
>Don't mix declaration and code. Why is this a char pointer? As opppose to
>void.

I'll split the declaration and code.
pkt should be a void *, will correct it in next version.


>
>> +		mbuf = rte_pktmbuf_alloc(rxq->mb_pool);
>> +		if (mbuf) {
>
>1.8.1

Got it.

>
>> +			memcpy(rte_pktmbuf_mtod(mbuf, void*), pkt, len);
>
>rte_memcpy()

Got it.

>
>> +			rte_pktmbuf_pkt_len(mbuf) =
>> +				rte_pktmbuf_data_len(mbuf) = len;
>
>Consider splitting this into two statements.

Got it.

>
>> +			rx_bytes += len;
>> +			bufs[count++] = mbuf;
>> +		} else {
>> +			dropped++;
>> +		}
>> +		rte_ring_enqueue(umem->buf_ring, (void *)addr);
>> +	}
>> +
>> +	xsk_ring_cons__release(rx, rcvd);
>> +
>> +	/* statistics */
>> +	rxq->rx_pkts += (rcvd - dropped);
>> +	rxq->rx_bytes += rx_bytes;
>> +	rxq->rx_dropped += dropped;
>> +
>> +	return count;
>> +}
>> +
>> +static void pull_umem_cq(struct xsk_umem_info *umem, int size)
>> +{
>> +	struct xsk_ring_cons *cq = &umem->cq;
>> +	int i, n;
>> +	uint32_t idx_cq;
>> +	uint64_t addr;
>> +
>> +	n = xsk_ring_cons__peek(cq, size, &idx_cq);
>
>Use size_t for n.

Got it.
>
>> +	if (n > 0) {
>> +		for (i = 0; i < n; i++) {
>
>Consider declaring 'addr' in this scope.

Got it.

>
>> +			addr = *xsk_ring_cons__comp_addr(cq,
>> +							 idx_cq++); > +			rte_ring_enqueue(umem->buf_ring, (void *)addr);
>> +		}
>> +
>> +		xsk_ring_cons__release(cq, n);
>> +	}
>> +}
>> +
>> +static void kick_tx(struct pkt_tx_queue *txq)
>> +{
>> +	struct xsk_umem_info *umem = txq->pair->umem;
>> +	int ret;
>> +
>> +	while (1) {
>
>for (;;)

Got it, is it a preference in DPDK convention for loop?

>
>> +		ret = sendto(xsk_socket__fd(txq->pair->xsk), NULL, 0,
>> +			     MSG_DONTWAIT, NULL, 0);
>> +
>> +		/* everything is ok */
>> +		if (ret >= 0)
>
>Use likely()?

Got it.

>
>> +			break;
>> +
>> +		/* some thing unexpected */
>> +		if (errno != EBUSY && errno != EAGAIN)
>> +			break;
>> +
>> +		/* pull from complete qeueu to leave more space */
>> +		if (errno == EAGAIN)
>> +			pull_umem_cq(umem, ETH_AF_XDP_TX_BATCH_SIZE);
>> +	}
>> +	pull_umem_cq(umem, ETH_AF_XDP_TX_BATCH_SIZE);
>> +}
>> +
>> +static uint16_t
>> +eth_af_xdp_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
>> +{
>> +	struct pkt_tx_queue *txq = queue;
>> +	struct xsk_umem_info *umem = txq->pair->umem;
>> +	struct rte_mbuf *mbuf;
>> +	void *addrs[ETH_AF_XDP_TX_BATCH_SIZE];
>> +	unsigned long tx_bytes = 0;
>> +	int i, valid = 0;
>> +	uint32_t idx_tx;
>> +
>> +	nb_pkts = nb_pkts < ETH_AF_XDP_TX_BATCH_SIZE ?
>> +		nb_pkts : ETH_AF_XDP_TX_BATCH_SIZE;
>
>Use RTE_MIN().

Got it.

>
>> +
>> +	pull_umem_cq(umem, nb_pkts);
>> +
>> +	nb_pkts = rte_ring_dequeue_bulk(umem->buf_ring, addrs,
>> +					nb_pkts, NULL);
>> +	if (!nb_pkts)
>
>nb_pkts == 0

Got it.

>
>> +		return 0;
>> +
>> +	if (xsk_ring_prod__reserve(&txq->tx, nb_pkts, &idx_tx) != nb_pkts) {
>> +		kick_tx(txq);
>> +		return 0;
>> +	}
>> +
>> +	for (i = 0; i < nb_pkts; i++) {
>> +		struct xdp_desc *desc;
>> +		char *pkt;
>
>Use void pointer?

Got it.

>
>> +		unsigned int buf_len = ETH_AF_XDP_FRAME_SIZE
>> +					- ETH_AF_XDP_DATA_HEADROOM;
>
>Use uint32_t, as you seem to do elsewhere.

Got it.

>
>> +		desc = xsk_ring_prod__tx_desc(&txq->tx, idx_tx + i);
>> +		mbuf = bufs[i];
>> +		if (mbuf->pkt_len <= buf_len) {
>> +			desc->addr = (uint64_t)addrs[valid];
>> +			desc->len = mbuf->pkt_len;
>> +			pkt = xsk_umem__get_data(umem->buffer,
>> +						 desc->addr);
>> +			memcpy(pkt, rte_pktmbuf_mtod(mbuf, void *),
>> +			       desc->len);
>
>rte_memcpy()

Got it.

>
>> +			valid++;
>> +			tx_bytes += mbuf->pkt_len;
>> +		}
>> +		rte_pktmbuf_free(mbuf);
>> +	}
>> +
>> +	xsk_ring_prod__submit(&txq->tx, nb_pkts);
>> +
>> +	kick_tx(txq);
>> +
>> +	if (valid < nb_pkts)
>> +		rte_ring_enqueue_bulk(umem->buf_ring, &addrs[valid],
>> +				 nb_pkts - valid, NULL);
>> +
>> +	txq->err_pkts += nb_pkts - valid;
>> +	txq->tx_pkts += valid;
>> +	txq->tx_bytes += tx_bytes;
>> +
>> +	return nb_pkts;
>> +}
>> +
>> +static int
>> +eth_dev_start(struct rte_eth_dev *dev)
>> +{
>> +	dev->data->dev_link.link_status = ETH_LINK_UP;
>> +
>> +	return 0;
>> +}
>> +
>> +/* This function gets called when the current port gets stopped. */
>> +static void
>> +eth_dev_stop(struct rte_eth_dev *dev)
>> +{
>> +	dev->data->dev_link.link_status = ETH_LINK_DOWN;
>> +}
>> +
>> +static int
>> +eth_dev_configure(struct rte_eth_dev *dev __rte_unused)
>> +{
>> +	/* rx/tx must be paired */
>> +	if (dev->data->nb_rx_queues != dev->data->nb_tx_queues)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>> +static void
>> +eth_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +
>> +	dev_info->if_index = internals->if_index;
>> +	dev_info->max_mac_addrs = 1;
>> +	dev_info->max_rx_pktlen = (uint32_t)ETH_FRAME_LEN;
>> +	dev_info->max_rx_queues = 1;
>> +	dev_info->max_tx_queues = 1;
>> +	dev_info->min_rx_bufsize = 0;
>> +
>> +	dev_info->default_rxportconf.nb_queues = 1;
>> +	dev_info->default_txportconf.nb_queues = 1;
>> +	dev_info->default_rxportconf.ring_size = ETH_AF_XDP_DFLT_NUM_DESCS;
>> +	dev_info->default_txportconf.ring_size = ETH_AF_XDP_DFLT_NUM_DESCS;
>> +}
>> +
>> +static int
>> +eth_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	struct xdp_statistics xdp_stats;
>> +	struct pkt_rx_queue *rxq;
>> +	socklen_t optlen;
>> +	int i;
>> +
>> +	optlen = sizeof(struct xdp_statistics);
>> +	for (i = 0; i < dev->data->nb_rx_queues; i++) {
>> +		rxq = &internals->rx_queues[i];
>> +		stats->q_ipackets[i] = internals->rx_queues[i].rx_pkts;
>> +		stats->q_ibytes[i] = internals->rx_queues[i].rx_bytes;
>> +
>> +		stats->q_opackets[i] = internals->tx_queues[i].tx_pkts;
>> +		stats->q_obytes[i] = internals->tx_queues[i].tx_bytes;
>> +
>> +		stats->ipackets += stats->q_ipackets[i];
>> +		stats->ibytes += stats->q_ibytes[i];
>> +		stats->imissed += internals->rx_queues[i].rx_dropped;
>> +		getsockopt(xsk_socket__fd(rxq->xsk), SOL_XDP, XDP_STATISTICS,
>> +				&xdp_stats, &optlen);
>> +		stats->imissed += xdp_stats.rx_dropped;
>> +
>> +		stats->opackets += stats->q_opackets[i];
>> +		stats->oerrors += stats->q_errors[i];
>> +		stats->oerrors += internals->tx_queues[i].err_pkts;
>> +		stats->obytes += stats->q_obytes[i];
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void
>> +eth_stats_reset(struct rte_eth_dev *dev)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	int i;
>> +
>> +	for (i = 0; i < ETH_AF_XDP_MAX_QUEUE_PAIRS; i++) {
>> +		internals->rx_queues[i].rx_pkts = 0;
>> +		internals->rx_queues[i].rx_bytes = 0;
>> +		internals->rx_queues[i].rx_dropped = 0;
>> +
>> +		internals->tx_queues[i].tx_pkts = 0;
>> +		internals->tx_queues[i].err_pkts = 0;
>> +		internals->tx_queues[i].tx_bytes = 0;
>> +	}
>> +}
>> +
>> +static void remove_xdp_program(struct pmd_internals *internals)
>> +{
>> +	uint32_t curr_prog_id = 0;
>> +
>> +	if (bpf_get_link_xdp_id(internals->if_index, &curr_prog_id,
>> +				XDP_FLAGS_UPDATE_IF_NOEXIST)) {
>> +		RTE_LOG(ERR, AF_XDP, "bpf_get_link_xdp_id failed\n");
>> +		return;
>> +	}
>> +	bpf_set_link_xdp_fd(internals->if_index, -1,
>> +			XDP_FLAGS_UPDATE_IF_NOEXIST);
>> +}
>> +
>> +static void
>> +eth_dev_close(struct rte_eth_dev *dev)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	struct pkt_rx_queue *rxq;
>> +	int i;
>> +
>> +	RTE_LOG(INFO, AF_XDP, "Closing AF_XDP ethdev on numa socket %u\n",
>> +		rte_socket_id());
>> +
>> +	for (i = 0; i < ETH_AF_XDP_MAX_QUEUE_PAIRS; i++) {
>> +		rxq = &internals->rx_queues[i];
>> +		if (!rxq->umem)
>> +			break;
>> +		xsk_socket__delete(rxq->xsk);
>> +	}
>> +
>> +	(void)xsk_umem__delete(internals->umem->umem);
>> +	remove_xdp_program(internals);
>> +}
>> +
>> +static void
>> +eth_queue_release(void *q __rte_unused)
>> +{
>> +}
>> +
>> +static int
>> +eth_link_update(struct rte_eth_dev *dev __rte_unused,
>> +		int wait_to_complete __rte_unused)
>> +{
>> +	return 0;
>> +}
>> +
>> +static void xdp_umem_destroy(struct xsk_umem_info *umem)
>> +{
>> +	free(umem->buffer);
>> +	umem->buffer = NULL;
>> +
>> +	rte_ring_free(umem->buf_ring);
>> +	umem->buf_ring = NULL;
>> +
>> +	free(umem);
>> +	umem = NULL;
>> +}
>> +
>> +static struct xsk_umem_info *xdp_umem_configure(void)
>> +{
>> +	struct xsk_umem_info *umem;
>> +	struct xsk_umem_config usr_config = {
>> +		.fill_size = ETH_AF_XDP_DFLT_NUM_DESCS,
>> +		.comp_size = ETH_AF_XDP_DFLT_NUM_DESCS,
>> +		.frame_size = ETH_AF_XDP_FRAME_SIZE,
>> +		.frame_headroom = ETH_AF_XDP_DATA_HEADROOM };
>> +	void *bufs = NULL;
>> +	char ring_name[0x100];
>> +	int ret;
>> +	uint64_t i;
>> +
>> +	umem = calloc(1, sizeof(*umem));
>> +	if (!umem) {
>
>1.8.1

Got it.

>
>> +		RTE_LOG(ERR, AF_XDP, "Failed to allocate umem info");
>> +		return NULL;
>> +	}
>> +
>> +	snprintf(ring_name, 0x100, "af_xdp_ring");
>
>Again the magical 0x100.

Will correct it.

>
>> +	umem->buf_ring = rte_ring_create(ring_name,
>> +					 ETH_AF_XDP_NUM_BUFFERS,
>> +					 SOCKET_ID_ANY,
>> +					 0x0);
>> +	if (!umem->buf_ring) {
>
>1.8.1

Got it.

>
>> +		RTE_LOG(ERR, AF_XDP,
>> +			"Failed to create rte_ring\n");
>> +		goto err;
>> +	}
>> +
>> +	for (i = 0; i < ETH_AF_XDP_NUM_BUFFERS; i++)
>> +		rte_ring_enqueue(umem->buf_ring,
>> +				 (void *)(i * ETH_AF_XDP_FRAME_SIZE +
>> +					  ETH_AF_XDP_DATA_HEADROOM));
>> +
>> +	if (posix_memalign(&bufs, getpagesize(),
>> +			   ETH_AF_XDP_NUM_BUFFERS * ETH_AF_XDP_FRAME_SIZE)) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to allocate memory pool.\n");
>> +		goto err;
>> +	}
>> +	ret = xsk_umem__create(&umem->umem, bufs,
>> +			       ETH_AF_XDP_NUM_BUFFERS * ETH_AF_XDP_FRAME_SIZE,
>> +			       &umem->fq, &umem->cq,
>> +			       &usr_config);
>> +
>> +	if (ret) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to create umem");
>> +		goto err;
>> +	}
>> +	umem->buffer = bufs;
>> +
>> +	return umem;
>> +
>> +err:
>> +	xdp_umem_destroy(umem);
>> +	return NULL;
>> +}
>> +
>> +static int
>> +xsk_configure(struct pmd_internals *internals, struct pkt_rx_queue *rxq,
>> +	      int ring_size)
>> +{
>> +	struct xsk_socket_config cfg;
>> +	struct pkt_tx_queue *txq = rxq->pair;
>> +	int ret = 0;
>> +	int reserve_size;
>> +
>> +	rxq->umem = xdp_umem_configure();
>> +	if (!rxq->umem) {
>
>1.8.1

Got it.

>
>> +		ret = -ENOMEM;
>> +		goto err;
>> +	}
>> +
>> +	cfg.rx_size = ring_size;
>> +	cfg.tx_size = ring_size;
>> +	cfg.libbpf_flags = 0;
>> +	cfg.xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
>> +	cfg.bind_flags = 0;
>> +	ret = xsk_socket__create(&rxq->xsk, internals->if_name,
>> +			internals->queue_idx, rxq->umem->umem, &rxq->rx,
>> +			&txq->tx, &cfg);
>> +	if (ret) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to create xsk socket.\n");
>> +		goto err;
>> +	}
>> +
>> +	reserve_size = ETH_AF_XDP_DFLT_NUM_DESCS / 2;
>> +	ret = reserve_fill_queue(rxq->umem, reserve_size);
>> +	if (ret) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to reserve fill queue.\n");
>> +		goto err;
>> +	}
>> +
>> +	return 0;
>> +
>> +err:
>> +	xdp_umem_destroy(rxq->umem);
>> +
>> +	return ret;
>> +}
>> +
>> +static void
>> +queue_reset(struct pmd_internals *internals, uint16_t queue_idx)
>> +{
>> +	struct pkt_rx_queue *rxq = &internals->rx_queues[queue_idx];
>> +	struct pkt_tx_queue *txq = rxq->pair;
>> +	int xsk_fd = xsk_socket__fd(rxq->xsk);
>> +
>> +	if (xsk_fd) {
>> +		close(xsk_fd);
>> +		if (internals->umem) {
>
>1.8.1

Got it.

>
>> +			xdp_umem_destroy(internals->umem);
>> +			internals->umem = NULL;
>> +		}
>> +	}
>> +	memset(rxq, 0, sizeof(*rxq));
>> +	memset(txq, 0, sizeof(*txq));
>> +	rxq->pair = txq;
>> +	txq->pair = rxq;
>> +	rxq->queue_idx = queue_idx;
>> +	txq->queue_idx = queue_idx;
>> +}
>> +
>> +static int
>> +eth_rx_queue_setup(struct rte_eth_dev *dev,
>> +		   uint16_t rx_queue_id,
>> +		   uint16_t nb_rx_desc,
>> +		   unsigned int socket_id __rte_unused,
>> +		   const struct rte_eth_rxconf *rx_conf __rte_unused,
>> +		   struct rte_mempool *mb_pool)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	unsigned int buf_size, data_size;
>
>uint32_t

Got it.

>
>> +	struct pkt_rx_queue *rxq;
>> +	int ret = 0;
>
>No need to set 'ret'. Alternatively, restructure so you always return 'ret'.

Got it.

>
>> +
>> +	rxq = &internals->rx_queues[rx_queue_id];
>> +	queue_reset(internals, rx_queue_id);
>> +
>> +	/* Now get the space available for data in the mbuf */
>> +	buf_size = rte_pktmbuf_data_room_size(mb_pool) -
>> +		RTE_PKTMBUF_HEADROOM;
>> +	data_size = ETH_AF_XDP_FRAME_SIZE - ETH_AF_XDP_DATA_HEADROOM;
>> +
>> +	if (data_size > buf_size) {
>> +		RTE_LOG(ERR, AF_XDP,
>> +			"%s: %d bytes will not fit in mbuf (%d bytes)\n",
>> +			dev->device->name, data_size, buf_size);
>> +		ret = -ENOMEM;
>> +		goto err;
>> +	}
>> +
>> +	rxq->mb_pool = mb_pool;
>> +
>> +	if (xsk_configure(internals, rxq, nb_rx_desc)) {
>> +		RTE_LOG(ERR, AF_XDP,
>> +			"Failed to configure xdp socket\n");
>> +		ret = -EINVAL;
>> +		goto err;
>> +	}
>> +
>> +	internals->umem = rxq->umem;
>> +
>> +	dev->data->rx_queues[rx_queue_id] = rxq;
>> +	return 0;
>> +
>> +err:
>> +	queue_reset(internals, rx_queue_id);
>> +	return ret;
>> +}
>> +
>> +static int
>> +eth_tx_queue_setup(struct rte_eth_dev *dev,
>> +		   uint16_t tx_queue_id,
>> +		   uint16_t nb_tx_desc __rte_unused,
>> +		   unsigned int socket_id __rte_unused,
>> +		   const struct rte_eth_txconf *tx_conf __rte_unused)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	struct pkt_tx_queue *txq;
>> +
>> +	txq = &internals->tx_queues[tx_queue_id];
>> +
>> +	dev->data->tx_queues[tx_queue_id] = txq;
>> +	return 0;
>> +}
>> +
>> +static int
>> +eth_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +	struct ifreq ifr = { .ifr_mtu = mtu };
>> +	int ret;
>> +	int s;
>> +
>> +	s = socket(PF_INET, SOCK_DGRAM, 0);
>> +	if (s < 0)
>> +		return -EINVAL;
>> +
>> +	strlcpy(ifr.ifr_name, internals->if_name, IFNAMSIZ);
>> +	ret = ioctl(s, SIOCSIFMTU, &ifr);
>> +	close(s);
>> +
>> +	if (ret < 0)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>> +static void
>> +eth_dev_change_flags(char *if_name, uint32_t flags, uint32_t mask)
>> +{
>> +	struct ifreq ifr;
>> +	int s;
>> +
>> +	s = socket(PF_INET, SOCK_DGRAM, 0);
>> +	if (s < 0)
>> +		return;
>> +
>> +	strlcpy(ifr.ifr_name, if_name, IFNAMSIZ);
>> +	if (ioctl(s, SIOCGIFFLAGS, &ifr) < 0)
>> +		goto out;
>> +	ifr.ifr_flags &= mask;
>> +	ifr.ifr_flags |= flags;
>> +	if (ioctl(s, SIOCSIFFLAGS, &ifr) < 0)
>> +		goto out;
>> +out:
>> +	close(s);
>> +}
>> +
>> +static void
>> +eth_dev_promiscuous_enable(struct rte_eth_dev *dev)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +
>> +	eth_dev_change_flags(internals->if_name, IFF_PROMISC, ~0);
>> +}
>> +
>> +static void
>> +eth_dev_promiscuous_disable(struct rte_eth_dev *dev)
>> +{
>> +	struct pmd_internals *internals = dev->data->dev_private;
>> +
>> +	eth_dev_change_flags(internals->if_name, 0, ~IFF_PROMISC);
>> +}
>> +
>> +static const struct eth_dev_ops ops = {
>> +	.dev_start = eth_dev_start,
>> +	.dev_stop = eth_dev_stop,
>> +	.dev_close = eth_dev_close,
>> +	.dev_configure = eth_dev_configure,
>> +	.dev_infos_get = eth_dev_info,
>> +	.mtu_set = eth_dev_mtu_set,
>> +	.promiscuous_enable = eth_dev_promiscuous_enable,
>> +	.promiscuous_disable = eth_dev_promiscuous_disable,
>> +	.rx_queue_setup = eth_rx_queue_setup,
>> +	.tx_queue_setup = eth_tx_queue_setup,
>> +	.rx_queue_release = eth_queue_release,
>> +	.tx_queue_release = eth_queue_release,
>> +	.link_update = eth_link_update,
>> +	.stats_get = eth_stats_get,
>> +	.stats_reset = eth_stats_reset,
>> +};
>> +
>> +/** parse integer from integer argument */
>> +static int
>> +parse_integer_arg(const char *key __rte_unused,
>> +		  const char *value, void *extra_args)
>> +{
>> +	int *i = (int *)extra_args;
>> +
>> +	*i = atoi(value);
>
>Use strtol().

Got it.

>
>> +	if (*i < 0) {
>> +		RTE_LOG(ERR, AF_XDP, "Argument has to be positive.\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +/** parse name argument */
>> +static int
>> +parse_name_arg(const char *key __rte_unused,
>> +	       const char *value, void *extra_args)
>> +{
>> +	char *name = extra_args;
>> +
>> +	if (strlen(value) > IFNAMSIZ) {
>
>The buffer is IFNAMSIZ bytes (which it should be), so it can't hold a string
>with strlen() == IFNAMSIZ.

Good catch. should be strlen(value) > IFNAMSIZ - 1 

>
>> +		RTE_LOG(ERR, AF_XDP, "Invalid name %s, should be less than "
>> +			"%u bytes.\n", value, IFNAMSIZ);
>> +		return -EINVAL;
>> +	}
>> +
>> +	strlcpy(name, value, IFNAMSIZ);
>> +
>> +	return 0;
>> +}
>> +
>> +static int
>> +parse_parameters(struct rte_kvargs *kvlist,
>> +		 char *if_name,
>> +		 int *queue_idx)
>> +{
>> +	int ret = 0;
>
>Should not be initialized.

Got it.

>
>> +
>> +	ret = rte_kvargs_process(kvlist, ETH_AF_XDP_IFACE_ARG,
>> +				 &parse_name_arg, if_name);
>> +	if (ret < 0)
>> +		goto free_kvlist;
>> +
>> +	ret = rte_kvargs_process(kvlist, ETH_AF_XDP_QUEUE_IDX_ARG,
>> +				 &parse_integer_arg, queue_idx);
>> +	if (ret < 0)
>> +		goto free_kvlist;
>
>I fail to see the point of this goto, but maybe there's more code to follow
>in future patches.

Yes, We'll add more parameters in the future.

>
>> +
>> +free_kvlist:
>> +	rte_kvargs_free(kvlist);
>> +	return ret;
>> +}
>> +
>> +static int
>> +get_iface_info(const char *if_name,
>> +	       struct ether_addr *eth_addr,
>> +	       int *if_index)
>> +{
>> +	struct ifreq ifr;
>> +	int sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_IP);
>> +
>> +	if (sock < 0)
>> +		return -1;
>> +
>> +	strlcpy(ifr.ifr_name, if_name, IFNAMSIZ);
>> +	if (ioctl(sock, SIOCGIFINDEX, &ifr))
>> +		goto error;
>> +
>> +	if (ioctl(sock, SIOCGIFHWADDR, &ifr))
>> +		goto error;
>> +
>> +	rte_memcpy(eth_addr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
>> +
>> +	close(sock);
>> +	*if_index = if_nametoindex(if_name);
>> +	return 0;
>> +
>> +error:
>> +	close(sock);
>> +	return -1;
>> +}
>> +
>> +static int
>> +init_internals(struct rte_vdev_device *dev,
>> +	       const char *if_name,
>> +	       int queue_idx,
>> +	       struct rte_eth_dev **eth_dev)
>> +{
>> +	const char *name = rte_vdev_device_name(dev);
>> +	const unsigned int numa_node = dev->device.numa_node;
>> +	struct pmd_internals *internals = NULL;
>> +	int ret;
>> +	int i;
>> +
>> +	internals = rte_zmalloc_socket(name, sizeof(*internals), 0, numa_node);
>> +	if (!internals)
>
>1.8.1

Got it.

>
>> +		return -ENOMEM;
>> +
>> +	internals->queue_idx = queue_idx;
>> +	strlcpy(internals->if_name, if_name, IFNAMSIZ);
>> +
>> +	for (i = 0; i < ETH_AF_XDP_MAX_QUEUE_PAIRS; i++) {
>> +		internals->tx_queues[i].pair = &internals->rx_queues[i];
>> +		internals->rx_queues[i].pair = &internals->tx_queues[i];
>> +	}
>> +
>> +	ret = get_iface_info(if_name, &internals->eth_addr,
>> +			     &internals->if_index);
>> +	if (ret)
>> +		goto err;
>> +
>> +	*eth_dev = rte_eth_vdev_allocate(dev, 0);
>> +	if (!*eth_dev)
>
>1.8.1

Got it.

>
>> +		goto err;
>> +
>> +	(*eth_dev)->data->dev_private = internals;
>> +	(*eth_dev)->data->dev_link = pmd_link;
>> +	(*eth_dev)->data->mac_addrs = &internals->eth_addr;
>> +	(*eth_dev)->dev_ops = &ops;
>> +	(*eth_dev)->rx_pkt_burst = eth_af_xdp_rx;
>> +	(*eth_dev)->tx_pkt_burst = eth_af_xdp_tx;
>> +
>> +	return 0;
>> +
>> +err:
>> +	rte_free(internals);
>> +	return -1;
>> +}
>> +
>> +static int
>> +rte_pmd_af_xdp_probe(struct rte_vdev_device *dev)
>> +{
>> +	struct rte_kvargs *kvlist;
>> +	char if_name[IFNAMSIZ];
>> +	int xsk_queue_idx = ETH_AF_XDP_DFLT_QUEUE_IDX;
>> +	struct rte_eth_dev *eth_dev = NULL;
>> +	const char *name;
>> +	int ret;
>> +
>> +	RTE_LOG(INFO, AF_XDP, "Initializing pmd_af_xdp for %s\n",
>> +		rte_vdev_device_name(dev));
>> +
>> +	name = rte_vdev_device_name(dev);
>> +	if (rte_eal_process_type() == RTE_PROC_SECONDARY &&
>> +		strlen(rte_vdev_device_args(dev)) == 0) {
>> +		eth_dev = rte_eth_dev_attach_secondary(name);
>> +		if (!eth_dev) {
>> +			RTE_LOG(ERR, AF_XDP, "Failed to probe %s\n", name);
>> +			return -EINVAL;
>> +		}
>> +		eth_dev->dev_ops = &ops;
>> +		rte_eth_dev_probing_finish(eth_dev);
>> +		return 0;
>> +	}
>> +
>> +	kvlist = rte_kvargs_parse(rte_vdev_device_args(dev), valid_arguments);
>> +	if (!kvlist) {
>> +		RTE_LOG(ERR, AF_XDP, "Invalid kvargs key\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (dev->device.numa_node == SOCKET_ID_ANY)
>> +		dev->device.numa_node = rte_socket_id();
>> +
>> +	if (parse_parameters(kvlist, if_name, &xsk_queue_idx) < 0) {
>> +		RTE_LOG(ERR, AF_XDP, "Invalid kvargs value\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = init_internals(dev, if_name, xsk_queue_idx, &eth_dev);
>> +	if (ret) {
>> +		RTE_LOG(ERR, AF_XDP, "Failed to init internals\n");
>> +		return ret;
>> +	}
>> +
>> +	rte_eth_dev_probing_finish(eth_dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static int
>> +rte_pmd_af_xdp_remove(struct rte_vdev_device *dev)
>> +{
>> +	struct rte_eth_dev *eth_dev = NULL;
>> +	struct pmd_internals *internals;
>> +
>> +	RTE_LOG(INFO, AF_XDP, "Removing AF_XDP ethdev on numa socket %u\n",
>> +		rte_socket_id());
>> +
>> +	if (!dev)
>> +		return -1;
>> +
>> +	/* find the ethdev entry */
>> +	eth_dev = rte_eth_dev_allocated(rte_vdev_device_name(dev));
>> +	if (!eth_dev)
>> +		return -1;
>> +
>> +	internals = eth_dev->data->dev_private;
>> +
>> +	rte_ring_free(internals->umem->buf_ring);
>> +	rte_free(internals->umem->buffer);
>> +	rte_free(internals->umem);
>> +
>> +	rte_eth_dev_release_port(eth_dev);
>> +
>> +
>> +	return 0;
>> +}
>> +
>> +static struct rte_vdev_driver pmd_af_xdp_drv = {
>> +	.probe = rte_pmd_af_xdp_probe,
>> +	.remove = rte_pmd_af_xdp_remove,
>> +};
>> +
>> +RTE_PMD_REGISTER_VDEV(eth_af_xdp, pmd_af_xdp_drv);
>> +RTE_PMD_REGISTER_PARAM_STRING(eth_af_xdp,
>> +			      "iface=<string> "
>> +			      "queue=<int> ");
>> diff --git a/drivers/net/af_xdp/rte_pmd_af_xdp_version.map b/drivers/net/af_xdp/rte_pmd_af_xdp_version.map
>> new file mode 100644
>> index 000000000..c6db030fe
>> --- /dev/null
>> +++ b/drivers/net/af_xdp/rte_pmd_af_xdp_version.map
>> @@ -0,0 +1,3 @@
>> +DPDK_19.05 {
>> +	local: *;
>> +};
>> diff --git a/drivers/net/meson.build b/drivers/net/meson.build
>> index 3ecc78cee..1105e72d8 100644
>> --- a/drivers/net/meson.build
>> +++ b/drivers/net/meson.build
>> @@ -2,6 +2,7 @@
>>   # Copyright(c) 2017 Intel Corporation
>>   drivers = ['af_packet',
>> +	'af_xdp',
>>   	'ark',
>>   	'atlantic',
>>   	'avp',
>> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
>> index 262132fc6..be0af73cc 100644
>> --- a/mk/rte.app.mk
>> +++ b/mk/rte.app.mk
>> @@ -143,6 +143,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL)  += -lrte_mempool_dpaa2
>>   endif
>>   _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET)  += -lrte_pmd_af_packet
>> +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_XDP)     += -lrte_pmd_af_xdp -lelf -lbpf
>>   _LDLIBS-$(CONFIG_RTE_LIBRTE_ARK_PMD)        += -lrte_pmd_ark
>>   _LDLIBS-$(CONFIG_RTE_LIBRTE_ATLANTIC_PMD)   += -lrte_pmd_atlantic
>>   _LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD)        += -lrte_pmd_avp
>> 

  parent reply	other threads:[~2019-03-19  9:53 UTC|newest]

Thread overview: 399+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-01  8:09 [dpdk-dev] [PATCH v1 0/6] Introduce AF_XDP PMD Xiaolong Ye
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 1/6] net/af_xdp: introduce AF_XDP PMD driver Xiaolong Ye
2019-03-01 15:38   ` Luca Boccassi
2019-03-02  8:14     ` Ye Xiaolong
2019-03-17  3:34       ` Ye Xiaolong
2019-03-17  3:34         ` Ye Xiaolong
2019-03-24 12:07         ` Luca Boccassi
2019-03-24 12:07           ` Luca Boccassi
2019-03-25  2:45           ` Ye Xiaolong
2019-03-25  2:45             ` Ye Xiaolong
2019-03-25 10:42             ` Luca Boccassi
2019-03-25 10:42               ` Luca Boccassi
2019-03-25 12:22               ` Ye Xiaolong
2019-03-25 12:22                 ` Ye Xiaolong
2019-03-26  2:18               ` Ye Xiaolong
2019-03-26  2:18                 ` Ye Xiaolong
2019-03-26 10:14                 ` Luca Boccassi
2019-03-26 10:14                   ` Luca Boccassi
2019-03-26 12:12                   ` Ye Xiaolong
2019-03-26 12:12                     ` Ye Xiaolong
2019-03-01 18:31   ` Stephen Hemminger
2019-03-02  8:08     ` Ye Xiaolong
2019-03-01 18:32   ` Stephen Hemminger
2019-03-02  8:07     ` Ye Xiaolong
2019-03-05  8:25   ` David Marchand
2019-03-07  3:19     ` Ye Xiaolong
2019-03-11 16:20   ` Ferruh Yigit
2019-03-12 15:54     ` Ye Xiaolong
2019-03-13 10:54       ` Ferruh Yigit
2019-03-13 11:12         ` Ye Xiaolong
2019-03-17  3:35       ` Ye Xiaolong
2019-03-17  3:35         ` Ye Xiaolong
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 2/6] lib/mbuf: enable parse flags when create mempool Xiaolong Ye
2019-03-05  8:30   ` David Marchand
2019-03-07  3:07     ` Ye Xiaolong
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 3/6] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 4/6] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 5/6] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-01  8:09 ` [dpdk-dev] [PATCH v1 6/6] app/testpmd: add mempool flags parameter Xiaolong Ye
2019-03-01 18:34   ` Stephen Hemminger
2019-03-02  8:06     ` Ye Xiaolong
2019-03-11 16:46   ` Ferruh Yigit
2019-03-12 15:10     ` Ye Xiaolong
2019-03-11 16:43 ` [dpdk-dev] [PATCH v1 0/6] Introduce AF_XDP PMD Ferruh Yigit
2019-03-11 17:19   ` Thomas Monjalon
2019-03-12  1:51     ` Zhang, Qi Z
2019-03-12  7:55       ` Karlsson, Magnus
2019-03-19  7:12 ` [dpdk-dev] [PATCH v2 " Xiaolong Ye
2019-03-19  7:12   ` Xiaolong Ye
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 1/6] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19  9:07     ` Mattias Rönnblom
2019-03-19  9:07       ` Mattias Rönnblom
2019-03-19  9:49       ` Ye Xiaolong [this message]
2019-03-19  9:49         ` Ye Xiaolong
2019-03-19 16:14     ` Stephen Hemminger
2019-03-19 16:14       ` Stephen Hemminger
2019-03-20  2:32       ` Ye Xiaolong
2019-03-20  2:32         ` Ye Xiaolong
2019-03-19 16:16     ` Stephen Hemminger
2019-03-19 16:16       ` Stephen Hemminger
2019-03-19 16:33       ` Bruce Richardson
2019-03-19 16:33         ` Bruce Richardson
2019-03-20  2:07         ` Ye Xiaolong
2019-03-20  2:07           ` Ye Xiaolong
2019-03-20  2:05       ` Ye Xiaolong
2019-03-20  2:05         ` Ye Xiaolong
2019-03-20  9:23     ` David Marchand
2019-03-20  9:23       ` David Marchand
2019-03-20 15:20       ` Ye Xiaolong
2019-03-20 15:20         ` Ye Xiaolong
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 2/6] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 3/6] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 4/6] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 5/6] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19  8:12     ` Mattias Rönnblom
2019-03-19  8:12       ` Mattias Rönnblom
2019-03-19  8:39       ` Ye Xiaolong
2019-03-19  8:39         ` Ye Xiaolong
2019-03-20  9:22     ` David Marchand
2019-03-20  9:22       ` David Marchand
2019-03-20  9:48       ` Zhang, Qi Z
2019-03-20  9:48         ` Zhang, Qi Z
2019-03-19  7:12   ` [dpdk-dev] [PATCH v2 6/6] app/testpmd: add mempool flags parameter Xiaolong Ye
2019-03-19  7:12     ` Xiaolong Ye
2019-03-19 23:36     ` Jerin Jacob Kollanukkaran
2019-03-19 23:36       ` Jerin Jacob Kollanukkaran
2019-03-20  2:08       ` Ye Xiaolong
2019-03-20  2:08         ` Ye Xiaolong
2019-03-20  9:23       ` David Marchand
2019-03-20  9:23         ` David Marchand
2019-03-20 15:22         ` Ye Xiaolong
2019-03-20 15:22           ` Ye Xiaolong
2019-03-21  9:18 ` [dpdk-dev] [PATCH v3 0/5] Introduce AF_XDP PMD Xiaolong Ye
2019-03-21  9:18   ` Xiaolong Ye
2019-03-21  9:18   ` [dpdk-dev] [PATCH v3 1/5] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-21  9:18     ` Xiaolong Ye
2019-03-21 15:24     ` Stephen Hemminger
2019-03-21 15:24       ` Stephen Hemminger
2019-03-22  2:05       ` Ye Xiaolong
2019-03-22  2:05         ` Ye Xiaolong
2019-03-21 15:25     ` Stephen Hemminger
2019-03-21 15:25       ` Stephen Hemminger
2019-03-22  2:05       ` Ye Xiaolong
2019-03-22  2:05         ` Ye Xiaolong
2019-03-21 15:27     ` Stephen Hemminger
2019-03-21 15:27       ` Stephen Hemminger
2019-03-22  2:04       ` Ye Xiaolong
2019-03-22  2:04         ` Ye Xiaolong
2019-03-21 15:28     ` Stephen Hemminger
2019-03-21 15:28       ` Stephen Hemminger
2019-03-22  2:15       ` Ye Xiaolong
2019-03-22  2:15         ` Ye Xiaolong
2019-03-22 15:38         ` Stephen Hemminger
2019-03-22 15:38           ` Stephen Hemminger
2019-03-22 23:20           ` Ye Xiaolong
2019-03-22 23:20             ` Ye Xiaolong
2019-03-21 15:30     ` Stephen Hemminger
2019-03-21 15:30       ` Stephen Hemminger
2019-03-22  2:01       ` Ye Xiaolong
2019-03-22  2:01         ` Ye Xiaolong
2019-03-22 15:37         ` Stephen Hemminger
2019-03-22 15:37           ` Stephen Hemminger
2019-03-22 23:19           ` Ye Xiaolong
2019-03-22 23:19             ` Ye Xiaolong
2019-03-21 15:31     ` Stephen Hemminger
2019-03-21 15:31       ` Stephen Hemminger
2019-03-22  1:55       ` Ye Xiaolong
2019-03-22  1:55         ` Ye Xiaolong
2019-03-21 15:32     ` Stephen Hemminger
2019-03-21 15:32       ` Stephen Hemminger
2019-03-22  1:54       ` Ye Xiaolong
2019-03-22  1:54         ` Ye Xiaolong
2019-03-21 15:36     ` Stephen Hemminger
2019-03-21 15:36       ` Stephen Hemminger
2019-03-22  1:49       ` Ye Xiaolong
2019-03-22  1:49         ` Ye Xiaolong
2019-03-22  9:32         ` Bruce Richardson
2019-03-22  9:32           ` Bruce Richardson
2019-03-21  9:18   ` [dpdk-dev] [PATCH v3 2/5] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-21  9:18     ` Xiaolong Ye
2019-03-21  9:18   ` [dpdk-dev] [PATCH v3 3/5] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-21  9:18     ` Xiaolong Ye
2019-03-21 14:00     ` Ananyev, Konstantin
2019-03-21 14:00       ` Ananyev, Konstantin
2019-03-21 14:23       ` Zhang, Qi Z
2019-03-21 14:23         ` Zhang, Qi Z
2019-03-21  9:18   ` [dpdk-dev] [PATCH v3 4/5] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-21  9:18     ` Xiaolong Ye
2019-03-21  9:18   ` [dpdk-dev] [PATCH v3 5/5] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-21  9:18     ` Xiaolong Ye
2019-03-22 13:01 ` [dpdk-dev] [PATCH v4 0/5] Introduce AF_XDP PMD Xiaolong Ye
2019-03-22 13:01   ` Xiaolong Ye
2019-03-22 13:01   ` [dpdk-dev] [PATCH v4 1/5] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-22 13:01     ` Xiaolong Ye
2019-03-22 14:32     ` Maxime Coquelin
2019-03-22 14:32       ` Maxime Coquelin
2019-03-24  9:32       ` Ye Xiaolong
2019-03-24  9:32         ` Ye Xiaolong
2019-03-24 12:10     ` Luca Boccassi
2019-03-24 12:10       ` Luca Boccassi
2019-03-24 16:27       ` Thomas Monjalon
2019-03-24 16:27         ` Thomas Monjalon
2019-03-22 13:01   ` [dpdk-dev] [PATCH v4 2/5] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-22 13:01     ` Xiaolong Ye
2019-03-22 14:36     ` Maxime Coquelin
2019-03-22 14:36       ` Maxime Coquelin
2019-03-24  9:08       ` Ye Xiaolong
2019-03-24  9:08         ` Ye Xiaolong
2019-03-22 13:01   ` [dpdk-dev] [PATCH v4 3/5] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-22 13:01     ` Xiaolong Ye
2019-03-22 13:01   ` [dpdk-dev] [PATCH v4 4/5] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-22 13:01     ` Xiaolong Ye
2019-03-22 14:51     ` Maxime Coquelin
2019-03-22 14:51       ` Maxime Coquelin
2019-03-24  9:08       ` Ye Xiaolong
2019-03-24  9:08         ` Ye Xiaolong
2019-03-24 11:52         ` Ye Xiaolong
2019-03-24 11:52           ` Ye Xiaolong
2019-03-22 13:01   ` [dpdk-dev] [PATCH v4 5/5] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-22 13:01     ` Xiaolong Ye
2019-03-25  6:03 ` [dpdk-dev] [PATCH v5 0/5] Introduce AF_XDP PMD Xiaolong Ye
2019-03-25  6:03   ` Xiaolong Ye
2019-03-25  6:03   ` [dpdk-dev] [PATCH v5 1/5] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-25  6:03     ` Xiaolong Ye
2019-03-25 15:58     ` Stephen Hemminger
2019-03-25 15:58       ` Stephen Hemminger
2019-03-26  2:13       ` Ye Xiaolong
2019-03-26  2:13         ` Ye Xiaolong
2019-03-25  6:03   ` [dpdk-dev] [PATCH v5 2/5] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-25  6:03     ` Xiaolong Ye
2019-03-25  6:03   ` [dpdk-dev] [PATCH v5 3/5] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-25  6:03     ` Xiaolong Ye
2019-03-25  9:04     ` Andrew Rybchenko
2019-03-25  9:04       ` Andrew Rybchenko
2019-03-26  3:27       ` Ye Xiaolong
2019-03-26  3:27         ` Ye Xiaolong
2019-03-25  6:03   ` [dpdk-dev] [PATCH v5 4/5] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-25  6:03     ` Xiaolong Ye
2019-03-25  6:04   ` [dpdk-dev] [PATCH v5 5/5] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-25  6:04     ` Xiaolong Ye
2019-03-26 12:20 ` [dpdk-dev] [PATCH v6 0/5] Introduce AF_XDP PMD Xiaolong Ye
2019-03-26 12:20   ` Xiaolong Ye
2019-03-26 12:20   ` [dpdk-dev] [PATCH v6 1/5] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-26 12:20     ` Xiaolong Ye
2019-03-26 19:08     ` Stephen Hemminger
2019-03-26 19:08       ` Stephen Hemminger
2019-03-27  5:33       ` Ye Xiaolong
2019-03-27  5:33         ` Ye Xiaolong
2019-03-26 12:20   ` [dpdk-dev] [PATCH v6 2/5] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-26 12:20     ` Xiaolong Ye
2019-03-26 12:20   ` [dpdk-dev] [PATCH v6 3/5] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-26 12:20     ` Xiaolong Ye
2019-03-26 12:20   ` [dpdk-dev] [PATCH v6 4/5] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-26 12:20     ` Xiaolong Ye
2019-03-29 17:42     ` Olivier Matz
2019-03-29 17:42       ` Olivier Matz
2019-03-31 12:38       ` Ye Xiaolong
2019-03-31 12:38         ` Ye Xiaolong
2019-04-01  5:47         ` Zhang, Qi Z
2019-04-01  5:47           ` Zhang, Qi Z
2019-03-26 12:20   ` [dpdk-dev] [PATCH v6 5/5] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-26 12:20     ` Xiaolong Ye
2019-03-27  9:00 ` [dpdk-dev] [PATCH v7 0/5] Introduce AF_XDP PMD Xiaolong Ye
2019-03-27  9:00   ` Xiaolong Ye
2019-03-27  9:00   ` [dpdk-dev] [PATCH v7 1/5] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-03-27  9:00     ` Xiaolong Ye
2019-03-28 17:51     ` Ferruh Yigit
2019-03-28 17:51       ` Ferruh Yigit
2019-03-28 18:52       ` Luca Boccassi
2019-03-28 18:52         ` Luca Boccassi
2019-04-02 19:55         ` Ferruh Yigit
2019-04-02 19:55           ` Ferruh Yigit
2019-03-29  2:05       ` Ye Xiaolong
2019-03-29  2:05         ` Ye Xiaolong
2019-03-29  8:10         ` Ferruh Yigit
2019-03-29  8:10           ` Ferruh Yigit
2019-03-27  9:00   ` [dpdk-dev] [PATCH v7 2/5] lib/mbuf: introduce helper to create mempool with flags Xiaolong Ye
2019-03-27  9:00     ` Xiaolong Ye
2019-03-28 19:30     ` Ferruh Yigit
2019-03-28 19:30       ` Ferruh Yigit
2019-03-27  9:00   ` [dpdk-dev] [PATCH v7 3/5] lib/mempool: allow page size aligned mempool Xiaolong Ye
2019-03-27  9:00     ` Xiaolong Ye
2019-03-28 19:34     ` Ferruh Yigit
2019-03-28 19:34       ` Ferruh Yigit
2019-03-29 10:37     ` Andrew Rybchenko
2019-03-29 10:37       ` Andrew Rybchenko
2019-03-29 17:42       ` Olivier Matz
2019-03-29 17:42         ` Olivier Matz
2019-03-27  9:00   ` [dpdk-dev] [PATCH v7 4/5] net/af_xdp: use mbuf mempool for buffer management Xiaolong Ye
2019-03-27  9:00     ` Xiaolong Ye
2019-03-27  9:00   ` [dpdk-dev] [PATCH v7 5/5] net/af_xdp: enable zero copy Xiaolong Ye
2019-03-27  9:00     ` Xiaolong Ye
2019-03-28 18:44     ` Ferruh Yigit
2019-03-28 18:44       ` Ferruh Yigit
2019-03-29  1:53       ` Ye Xiaolong
2019-03-29  1:53         ` Ye Xiaolong
2019-04-02 10:45 ` [dpdk-dev] [PATCH v8 0/1] AF_XDP PMD Xiaolong Ye
2019-04-02 10:45   ` Xiaolong Ye
2019-04-02 10:45   ` [dpdk-dev] [PATCH v8 1/1] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-04-02 10:45     ` Xiaolong Ye
2019-04-02 14:58     ` Stephen Hemminger
2019-04-02 14:58       ` Stephen Hemminger
2019-04-02 15:10       ` Ye Xiaolong
2019-04-02 15:10         ` Ye Xiaolong
2019-04-02 15:46 ` [dpdk-dev] [PATCH v9 0/1] Introduce AF_XDP PMD Xiaolong Ye
2019-04-02 15:46   ` Xiaolong Ye
2019-04-02 15:46   ` [dpdk-dev] [PATCH v9 1/1] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-04-02 15:46     ` Xiaolong Ye
2019-04-02 18:56     ` Stephen Hemminger
2019-04-02 18:56       ` Stephen Hemminger
2019-04-02 23:01       ` Ye Xiaolong
2019-04-02 23:01         ` Ye Xiaolong
2019-04-02 19:19     ` Luca Boccassi
2019-04-02 19:19       ` Luca Boccassi
2019-04-03  9:59       ` Ye Xiaolong
2019-04-03  9:59         ` Ye Xiaolong
2019-04-03 10:36         ` Luca Boccassi
2019-04-03 10:36           ` Luca Boccassi
2019-04-03 10:42           ` Luca Boccassi
2019-04-03 10:42             ` Luca Boccassi
2019-04-03 11:18             ` Ferruh Yigit
2019-04-03 11:18               ` Ferruh Yigit
2019-04-03 11:35               ` Luca Boccassi
2019-04-03 11:35                 ` Luca Boccassi
2019-04-03 12:16                 ` Luca Boccassi
2019-04-03 12:16                   ` Luca Boccassi
2019-04-03 12:33                   ` Ferruh Yigit
2019-04-03 12:33                     ` Ferruh Yigit
2019-04-03 13:09                 ` Ferruh Yigit
2019-04-03 13:09                   ` Ferruh Yigit
2019-04-03 13:29                   ` Luca Boccassi
2019-04-03 13:29                     ` Luca Boccassi
2019-04-03 14:43                     ` Ye Xiaolong
2019-04-03 14:43                       ` Ye Xiaolong
2019-04-03 14:51                       ` Luca Boccassi
2019-04-03 14:51                         ` Luca Boccassi
2019-04-03 15:14                         ` Ye Xiaolong
2019-04-03 15:14                           ` Ye Xiaolong
2019-04-03 15:23                           ` Bruce Richardson
2019-04-03 15:23                             ` Bruce Richardson
2019-04-03 15:34                             ` Ye Xiaolong
2019-04-03 15:34                               ` Ye Xiaolong
2019-04-03 14:22                   ` Ye Xiaolong
2019-04-03 14:22                     ` Ye Xiaolong
2019-04-03 15:52                     ` Ferruh Yigit
2019-04-03 15:52                       ` Ferruh Yigit
2019-04-03 15:57                       ` Ye Xiaolong
2019-04-03 15:57                         ` Ye Xiaolong
2019-04-17 12:30                         ` [dpdk-dev] [BUG] net/af_xdp: Current code can only create one af_xdp device Markus Theil
2019-04-17 12:30                           ` Markus Theil
2019-04-18  1:05                           ` Ye Xiaolong
2019-04-18  1:05                             ` Ye Xiaolong
2019-04-23 16:23                             ` Markus Theil
2019-04-23 16:23                               ` Markus Theil
2019-04-24  6:35                               ` Ye Xiaolong
2019-04-24  6:35                                 ` Ye Xiaolong
2019-04-24  9:21                                 ` Markus Theil
2019-04-24  9:21                                   ` Markus Theil
2019-04-24 14:47                                   ` Ye Xiaolong
2019-04-24 14:47                                     ` Ye Xiaolong
2019-04-24 20:33                                     ` Markus Theil
2019-04-24 20:33                                       ` Markus Theil
2019-04-25  5:43                                   ` Ye Xiaolong
2019-04-25  5:43                                     ` Ye Xiaolong
2019-04-18 15:20                           ` [dpdk-dev] [PATCH v1 1/2] net/af_xdp: name the buf ring dynamically Xiaolong Ye
2019-04-18 15:20                             ` Xiaolong Ye
2019-04-18 15:20                             ` [dpdk-dev] [PATCH v1 2/2] net/af_xdp: name the umem memzone dynamically Xiaolong Ye
2019-04-18 15:20                               ` Xiaolong Ye
2019-04-19  9:47                               ` David Marchand
2019-04-19  9:47                                 ` David Marchand
2019-04-19 12:33                                 ` Ferruh Yigit
2019-04-19 12:33                                   ` Ferruh Yigit
2019-04-19 15:05                                   ` Ye Xiaolong
2019-04-19 15:05                                     ` Ye Xiaolong
2019-04-19  9:46                             ` [dpdk-dev] [PATCH v1 1/2] net/af_xdp: name the buf ring dynamically David Marchand
2019-04-19  9:46                               ` David Marchand
2019-04-19 12:47                             ` [dpdk-dev] [PATCH v2] net/af_xdp: fix creating multiple instance Ferruh Yigit
2019-04-19 12:47                               ` Ferruh Yigit
2019-04-19 12:51                               ` Ferruh Yigit
2019-04-19 12:51                                 ` Ferruh Yigit
2019-04-02 19:43     ` [dpdk-dev] [PATCH v9 1/1] net/af_xdp: introduce AF XDP PMD driver Ferruh Yigit
2019-04-02 19:43       ` Ferruh Yigit
2019-04-03 13:22       ` Bruce Richardson
2019-04-03 13:22         ` Bruce Richardson
2019-04-03 13:34         ` Ferruh Yigit
2019-04-03 13:34           ` Ferruh Yigit
2019-04-03 16:59 ` [dpdk-dev] [PATCH v10 0/1] Introduce AF_XDP PMD Xiaolong Ye
2019-04-03 16:59   ` Xiaolong Ye
2019-04-03 16:59   ` [dpdk-dev] [PATCH v10 1/1] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-04-03 16:59     ` Xiaolong Ye
2019-04-03 17:32     ` Luca Boccassi
2019-04-03 17:32       ` Luca Boccassi
2019-04-03 17:44     ` Ferruh Yigit
2019-04-03 17:44       ` Ferruh Yigit
2019-04-03 18:52       ` Luca Boccassi
2019-04-03 18:52         ` Luca Boccassi
2019-04-04  5:36         ` Ye Xiaolong
2019-04-04  5:36           ` Ye Xiaolong
2019-04-04  5:55         ` Ye Xiaolong
2019-04-04  5:55           ` Ye Xiaolong
2019-04-04  7:01           ` Phil Yang (Arm Technology China)
2019-04-04  7:01             ` Phil Yang (Arm Technology China)
2019-04-04  8:39           ` Luca Boccassi
2019-04-04  8:39             ` Luca Boccassi
2019-04-04  8:40             ` Ye Xiaolong
2019-04-04  8:40               ` Ye Xiaolong
2019-04-04  5:29       ` Ye Xiaolong
2019-04-04  5:29         ` Ye Xiaolong
2019-04-04  8:51 ` [dpdk-dev] [PATCH v11 0/1] Introduce AF_XDP PMD Xiaolong Ye
2019-04-04  8:51   ` Xiaolong Ye
2019-04-04  8:51   ` [dpdk-dev] [PATCH v11 1/1] net/af_xdp: introduce AF XDP PMD driver Xiaolong Ye
2019-04-04  8:51     ` Xiaolong Ye
2019-04-04 16:20     ` Luca Boccassi
2019-04-04 16:20       ` Luca Boccassi
2019-04-04 16:41       ` Stephen Hemminger
2019-04-04 16:41         ` Stephen Hemminger
2019-04-04 17:05         ` Ferruh Yigit
2019-04-04 17:05           ` Ferruh Yigit
2019-04-04 23:39     ` Ferruh Yigit
2019-04-04 23:39       ` Ferruh Yigit
2019-04-05 15:05       ` Ye Xiaolong
2019-04-05 15:05         ` Ye Xiaolong
2019-04-05 15:17         ` Ferruh Yigit
2019-04-05 15:17           ` Ferruh Yigit
2019-04-05 15:22           ` Ye Xiaolong
2019-04-05 15:22             ` Ye Xiaolong
2019-04-05 15:23         ` Bruce Richardson
2019-04-05 15:23           ` Bruce Richardson
2019-04-05 15:31           ` Ferruh Yigit
2019-04-05 15:31             ` Ferruh Yigit
2019-04-05 15:35             ` Bruce Richardson
2019-04-05 15:35               ` Bruce Richardson
2019-04-04 16:13   ` [dpdk-dev] [PATCH v11 0/1] Introduce AF_XDP PMD Ferruh Yigit
2019-04-04 16:13     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190319094942.GB16135@intel.com \
    --to=xiaolong.ye@intel.com \
    --cc=bjorn.topel@intel.com \
    --cc=dev@dpdk.org \
    --cc=hofors@lysator.liu.se \
    --cc=magnus.karlsson@intel.com \
    --cc=qi.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).