DPDK patches and discussions
 help / color / mirror / Atom feed
From: Vipin Varghese <vipin.varghese@intel.com>
To: dev@dpdk.org, marko.kovacevic@intel.com, john.mcnamara@intel.com,
	shreyansh.jain@nxp.com
Cc: keith.wiles@intel.com, amit.tamboli@intel.com,
	sanjay.padubidri@intel.com, amol.patel@intel.com,
	ferruh.yigit@intel.com, Vipin Varghese <vipin.varghese@intel.com>
Subject: [dpdk-dev] [PATCH v8 2/2] doc: add guide for debug and troubleshoot
Date: Tue,  9 Apr 2019 12:03:44 +0530	[thread overview]
Message-ID: <20190409063344.36564-3-vipin.varghese@intel.com> (raw)
Message-ID: <20190409063344.TcnnV2USP-fFmqPeFazNK9-q76pICxAO91-B8eucSpk@z> (raw)
In-Reply-To: <20190409063344.36564-1-vipin.varghese@intel.com>

Add user guide on debugging and troubleshooting for common
issues and bottleneck found in the sample application model.

Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
---
 doc/guides/howto/debug_troubleshoot_guide.rst | 464 ++++++++++++++++++
 doc/guides/howto/index.rst                    |   1 +
 2 files changed, 465 insertions(+)
 create mode 100644 doc/guides/howto/debug_troubleshoot_guide.rst

diff --git a/doc/guides/howto/debug_troubleshoot_guide.rst b/doc/guides/howto/debug_troubleshoot_guide.rst
new file mode 100644
index 000000000..6abddcd32
--- /dev/null
+++ b/doc/guides/howto/debug_troubleshoot_guide.rst
@@ -0,0 +1,464 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Intel Corporation.
+
+Debug & Troubleshoot guide
+==========================
+
+DPDK applications can be designed to have simple or complex pipeline processing
+stages making use of single or multiple threads. Applications can use poll mode
+hardware devices which helps in offloading CPU cycles too. It is common to find
+solutions designed with
+
+* single or multiple primary processes
+
+* single primary and single secondary
+
+* single primary and multiple secondaries
+
+In all the above cases, it is tedious to isolate, debug, and understand various
+behaviors which occur randomly or periodically. The goal of the guide is to
+consolidate a few commonly seen issues for reference. Then, isolate to identify
+the root cause through step by step debug at various stages.
+
+.. note::
+
+ It is difficult to cover all possible issues; in a single attempt. With
+ feedback and suggestions from the community, more cases can be covered.
+
+
+Application Overview
+--------------------
+
+By making use of the application model as a reference, we can discuss multiple
+causes of issues in the guide. Let us assume the sample makes use of a single
+primary process, with various processing stages running on multiple cores. The
+application may also make uses of Poll Mode Driver, and libraries like service
+cores, mempool, mbuf, eventdev, cryptodev, QoS, and ethdev.
+
+The overview of an application modeled using PMD is shown in
+:numref:`dtg_sample_app_model`.
+
+.. _dtg_sample_app_model:
+
+.. figure:: img/dtg_sample_app_model.*
+
+   Overview of pipeline stage of an application
+
+
+Bottleneck Analysis
+-------------------
+
+A couple of factors that lead the design decision could be the platform, scale
+factor, and target. This distinct preference leads to multiple combinations,
+that are built using PMD and libraries of DPDK. While the compiler, library
+mode, and optimization flags are the components are to be constant, that
+affects the application too.
+
+
+Is there mismatch in packet (received < desired) rate?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+RX Port and associated core :numref:`dtg_rx_rate`.
+
+.. _dtg_rx_rate:
+
+.. figure:: img/dtg_rx_rate.*
+
+   RX packet rate compared against received rate.
+
+#. Is the configuration for the RX setup correctly?
+
+   * Identify if port Speed and Duplex is matching to desired values with
+     ``rte_eth_link_get``.
+
+   * Check ``DEV_RX_OFFLOAD_JUMBO_FRAME`` is set with ``rte_eth_dev_info_get``.
+
+   * Check promiscuous mode if the drops do not occur for unique MAC address
+     with ``rte_eth_promiscuous_get``.
+
+#. Is the drop isolated to certain NIC only?
+
+   * Make use of ``rte_eth_dev_stats`` to identify the drops cause.
+
+   * If there are mbuf drops, check nb_desc for RX descriptor as it might not
+     be sufficient for the application.
+
+   * If ``rte_eth_dev_stats`` shows drops are on specific RX queues, ensure RX
+     lcore threads has enough cycles for ``rte_eth_rx_burst`` on the port queue
+     pair.
+
+   * If there are redirect to a specific port queue pair with, ensure RX lcore
+     threads gets enough cycles.
+
+   * Check the RSS configuration ``rte_eth_dev_rss_hash_conf_get`` if the
+     spread is not even and causing drops.
+
+   * If PMD stats are not updating, then there might be offload or configuration
+     which is dropping the incoming traffic.
+
+#. Is there drops still seen?
+
+   * If there are multiple port queue pair, it might be the RX thread, RX
+     distributor, or event RX adapter not having enough cycles.
+
+   * If there are drops seen for RX adapter or RX distributor, try using
+     ``rte_prefetch_non_temporal`` which intimates the core that the mbuf in the
+     cache is temporary.
+
+
+Is there packet drops at receive or transmit?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+RX-TX port and associated cores :numref:`dtg_rx_tx_drop`.
+
+.. _dtg_rx_tx_drop:
+
+.. figure:: img/dtg_rx_tx_drop.*
+
+   RX-TX drops
+
+#. At RX
+
+   * Identify if there are multiple RX queue configured for port by
+     ``nb_rx_queues`` using ``rte_eth_dev_info_get``.
+
+   * Using ``rte_eth_dev_stats`` fetch drops in q_errors, check if RX thread
+     is configured to fetch packets from the port queue pair.
+
+   * Using ``rte_eth_dev_stats`` shows drops in ``rx_nombuf``, check if RX
+     thread has enough cycles to consume the packets from the queue.
+
+#. At TX
+
+   * If the TX rate is falling behind the application fill rate, identify if
+     there are enough descriptors with ``rte_eth_dev_info_get`` for TX.
+
+   * Check the ``nb_pkt`` in ``rte_eth_tx_burst`` is done for multiple packets.
+
+   * Check ``rte_eth_tx_burst`` invokes the vector function call for the PMD.
+
+   * If oerrors are getting incremented, TX packet validations are failing.
+     Check if there queue specific offload failures.
+
+   * If the drops occur for large size packets, check MTU and multi-segment
+     support configured for NIC.
+
+
+Is there object drops in producer point for the ring library?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Producer point for ring :numref:`dtg_producer_ring`.
+
+.. _dtg_producer_ring:
+
+.. figure:: img/dtg_producer_ring.*
+
+   Producer point for Rings
+
+#. Performance issue isolation at producer
+
+   * Use ``rte_ring_dump`` to validate for all single producer flag is set to
+     ``RING_F_SP_ENQ``.
+
+   * There should be sufficient ``rte_ring_free_count`` at any point in time.
+
+   * Extreme stalls in dequeue stage of the pipeline will cause
+     ``rte_ring_full`` to be true.
+
+
+Is there object drops in consumer point for the ring library?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Consumer point for ring :numref:`dtg_consumer_ring`.
+
+.. _dtg_consumer_ring:
+
+.. figure:: img/dtg_consumer_ring.*
+
+   Consumer point for Rings
+
+#. Performance issue isolation at consumer
+
+   * Use ``rte_ring_dump`` to validate for all single consumer flag is set to
+     ``RING_F_SC_DEQ``.
+
+   * If the desired burst dequeue falls behind the actual dequeue, the enqueue
+     stage is not filling up the ring as required.
+
+   * Extreme stall in the enqueue will lead to ``rte_ring_empty`` to be true.
+
+
+Is there a variance in packet or object processing rate in the pipeline?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Memory objects close to NUMA :numref:`dtg_mempool`.
+
+.. _dtg_mempool:
+
+.. figure:: img/dtg_mempool.*
+
+   Memory objects have to be close to the device per NUMA.
+
+#. Stall in processing pipeline can be attributes of MBUF release delays.
+   These can be narrowed down to
+
+   * Heavy processing cycles at single or multiple processing stages.
+
+   * Cache is spread due to the increased stages in the pipeline.
+
+   * CPU thread responsible for TX is not able to keep up with the burst of
+     traffic.
+
+   * Extra cycles to linearize multi-segment buffer and software offload like
+     checksum, TSO, and VLAN strip.
+
+   * Packet buffer copy in fast path also results in stalls in MBUF release if
+     not done selectively.
+
+   * Application logic sets ``rte_pktmbuf_refcnt_set`` to higher than the
+     desired value and frequently uses ``rte_pktmbuf_prefree_seg`` and does
+     not release MBUF back to mempool.
+
+#. Lower performance between the pipeline processing stages can be
+
+   * The NUMA instance for packets or objects from NIC, mempool, and ring
+     should be the same.
+
+   * Drops on a specific socket are due to insufficient objects in the pool.
+     Use ``rte_mempool_get_count`` or ``rte_mempool_avail_count`` to monitor
+     when drops occurs.
+
+   * Try prefetching the content in processing pipeline logic to minimize the
+     stalls.
+
+#. Performance issue can be due to special cases
+
+   * Check if MBUF continuous with ``rte_pktmbuf_is_contiguous`` as certain
+     offload requires the same.
+
+   * Use ``rte_mempool_cache_create`` for user threads require access to
+     mempool objects.
+
+   * If the variance is absent for larger huge pages, then try rte_mem_lock_page
+     on the objects, packets, lookup tables to isolate the issue.
+
+
+Is there a variance in cryptodev performance?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Crypto device and PMD :numref:`dtg_crypto`.
+
+.. _dtg_crypto:
+
+.. figure:: img/dtg_crypto.*
+
+   CRYPTO and interaction with PMD device.
+
+#. Performance issue isolation for enqueue
+
+   * Ensure cryptodev, resources and enqueue is running on NUMA cores.
+
+   * Isolate if the cause of errors for err_count using ``rte_cryptodev_stats``.
+
+   * Parallelize enqueue thread for varied multiple queue pair.
+
+#. Performance issue isolation for dequeue
+
+   * Ensure cryptodev, resources and dequeue are running on NUMA cores.
+
+   * Isolate if the cause of errors for err_count using ``rte_cryptodev_stats``.
+
+   * Parallelize dequeue thread for varied multiple queue pair.
+
+#. Performance issue isolation for crypto operation
+
+   * If the cryptodev software-assist is in use, ensure the library is built
+     with right (SIMD) flags or check if the queue pair using CPU ISA for
+     feature_flags AVX|SSE|NEON using ``rte_cryptodev_info_get``.
+
+   * If the cryptodev hardware-assist is in use, ensure both firmware and
+     drivers are up to date.
+
+#. Configuration issue isolation
+
+   * Identify cryptodev instances with ``rte_cryptodev_count`` and
+     ``rte_cryptodev_info_get``.
+
+
+Is user functions performance is not as expected?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Custom worker function :numref:`dtg_distributor_worker`.
+
+.. _dtg_distributor_worker:
+
+.. figure:: img/dtg_distributor_worker.*
+
+   Custom worker function performance drops.
+
+#. Performance issue isolation
+
+   * The functions running on CPU cores without context switches are the
+     performing scenarios. Identify lcore with ``rte_lcore`` and lcore index
+     mapping with CPU using ``rte_lcore_index``.
+
+   * The functions running on CPU cores without context switches are the
+     performing scenarios. Identify lcore with ``rte_lcore`` and lcore index
+     mapping with CPU using ``rte_lcore_index``.
+
+   * Use ``rte_thread_get_affinity`` to isolate functions running on the same
+     CPU core.
+
+#. Configuration issue isolation
+
+   * Identify core role using ``rte_eal_lcore_role`` to identify RTE, OFF and
+     SERVICE. Check performance functions are mapped to run on the cores.
+
+   * For high-performance execution logic ensure running it on correct NUMA
+     and non-master core.
+
+   * Analyze run logic with ``rte_dump_stack``, ``rte_dump_registers`` and
+     ``rte_memdump`` for more insights.
+
+   * Make use of objdump to ensure opcode is matching to the desired state.
+
+
+Is the execution cycles for dynamic service functions are not frequent?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+service functions on service cores :numref:`dtg_service`.
+
+.. _dtg_service:
+
+.. figure:: img/dtg_service.*
+
+   functions running on service cores
+
+#. Performance issue isolation
+
+   * Services configured for parallel execution should have
+     ``rte_service_lcore_count`` should be equal to
+     ``rte_service_lcore_count_services``.
+
+   * A service to run parallel on all cores should return
+     ``RTE_SERVICE_CAP_MT_SAFE`` for ``rte_service_probe_capability`` and
+     ``rte_service_map_lcore_get`` returns unique lcore.
+
+   * If service function execution cycles for dynamic service functions are
+     not frequent?
+
+   * If services share the lcore, overall execution should fit budget.
+
+#. Configuration issue isolation
+
+   * Check if service is running with ``rte_service_runstate_get``.
+
+   * Generic debug via ``rte_service_dump``.
+
+
+Is there a bottleneck in the performance of eventdev?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+#. Check for generic configuration
+
+   * Ensure the event devices created are right NUMA using
+     ``rte_event_dev_count`` and ``rte_event_dev_socket_id``.
+
+   * Check for event stages if the events are looped back into the same queue.
+
+   * If the failure is on the enqueue stage for events, check if queue depth
+     with ``rte_event_dev_info_get``.
+
+#. If there are performance drops in the enqueue stage
+
+   * Use ``rte_event_dev_dump`` to dump the eventdev information.
+
+   * Periodically checks stats for queue and port to identify the starvation.
+
+   * Check the in-flight events for the desired queue for enqueue and dequeue.
+
+
+Is there a variance in traffic manager?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Traffic Manager on TX interface :numref:`dtg_qos_tx`.
+
+.. _dtg_qos_tx:
+
+.. figure:: img/dtg_qos_tx.*
+
+   Traffic Manager just before TX.
+
+#. Identify the cause for a variance from expected behavior, is due to
+   insufficient CPU cycles. Use ``rte_tm_capabilities_get`` to fetch features
+   for hierarchies, WRED and priority schedulers to be offloaded hardware.
+
+#. Undesired flow drops can be narrowed down to WRED, priority, and rates
+   limiters.
+
+#. Isolate the flow in which the undesired drops occur. Use
+   ``rte_tn_get_number_of_leaf_node`` and flow table to ping down the leaf
+   where drops occur.
+
+#. Check the stats using ``rte_tm_stats_update`` and ``rte_tm_node_stats_read``
+   for drops for hierarchy, schedulers and WRED configurations.
+
+
+Is the packet not in the unexpected format?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Packet capture before and after processing :numref:`dtg_pdump`.
+
+.. _dtg_pdump:
+
+.. figure:: img/dtg_pdump.*
+
+   Capture points of Traffic at RX-TX.
+
+#. To isolate the possible packet corruption in the processing pipeline,
+   carefully staged capture packets are to be implemented.
+
+   * First, isolate at NIC entry and exit.
+
+     Use pdump in primary to allow secondary to access port-queue pair. The
+     packets get copied over in RX|TX callback by the secondary process using
+     ring buffers.
+
+   * Second, isolate at pipeline entry and exit.
+
+     Using hooks or callbacks capture the packet middle of the pipeline stage
+     to copy the packets, which can be shared to the secondary debug process
+     via user-defined custom rings.
+
+.. note::
+
+   Use similar analysis to objects and metadata corruption.
+
+
+Does the issue still persist?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The issue can be further narrowed down to the following causes.
+
+#. If there are vendor or application specific metadata, check for errors due
+   to META data error flags. Dumping private meta-data in the objects can give
+   insight into details for debugging.
+
+#. If there are multi-process for either data or configuration, check for
+   possible errors in the secondary process where the configuration fails and
+   possible data corruption in the data plane.
+
+#. Random drops in the RX or TX when opening other application is an indication
+   of the effect of a noisy neighbor. Try using the cache allocation technique
+   to minimize the effect between applications.
+
+
+How to develop a custom code to debug?
+--------------------------------------
+
+#. For an application that runs as the primary process only, debug functionality
+   is added in the same process. These can be invoked by timer call-back,
+   service core and signal handler.
+
+#. For the application that runs as multiple processes. debug functionality in
+   a standalone secondary process.
diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst
index a642a2be1..9527fa84d 100644
--- a/doc/guides/howto/index.rst
+++ b/doc/guides/howto/index.rst
@@ -18,3 +18,4 @@ HowTo Guides
     virtio_user_as_exceptional_path
     packet_capture_framework
     telemetry
+    debug_troubleshoot_guide
-- 
2.17.1


  parent reply	other threads:[~2019-04-09  6:33 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-30  4:56 [dpdk-dev] [PATCH v1] doc: add meson build to contributing guide Vipin Varghese
2018-10-30 10:54 ` Bruce Richardson
2018-10-30 14:13 ` [dpdk-dev] [PATCH v2] " Vipin Varghese
2018-10-30 14:18   ` [dpdk-dev] [PATCH v3] " Vipin Varghese
2018-11-14 14:30     ` Kovacevic, Marko
2018-11-24 18:57       ` Thomas Monjalon
2019-01-10 16:37         ` Varghese, Vipin
2019-01-24 23:05     ` [dpdk-dev] [PATCH v4] doc/patches: " Vipin Varghese
2019-01-28  0:39       ` Thomas Monjalon
2019-01-28 14:27         ` Varghese, Vipin
2019-01-28 14:52           ` Thomas Monjalon
2019-01-28 15:40             ` Varghese, Vipin
2019-01-29 10:10       ` [dpdk-dev] [PATCH v5] " Vipin Varghese
2019-02-12  9:36         ` Thomas Monjalon
2019-02-13  5:38           ` Varghese, Vipin
2019-02-13  5:41         ` [dpdk-dev] [PATCH v6] " Vipin Varghese
2019-02-25 17:12           ` [dpdk-dev] [PATCH v7 0/2] guide to debug and troubleshoot Vipin Varghese
2019-02-25 17:12             ` [dpdk-dev] [PATCH v7 1/2] doc: add svg for debug and troubleshoot guide Vipin Varghese
2019-04-01 14:56               ` Mcnamara, John
2019-04-01 14:56                 ` Mcnamara, John
2019-02-25 17:12             ` [dpdk-dev] [PATCH v7 2/2] doc: add guide for debug and troubleshoot Vipin Varghese
2019-04-01 14:56               ` Mcnamara, John
2019-04-01 14:56                 ` Mcnamara, John
2019-04-05  8:49                 ` Thomas Monjalon
2019-04-05  8:49                   ` Thomas Monjalon
2019-04-08  3:18                   ` Varghese, Vipin
2019-04-08  3:18                     ` Varghese, Vipin
2019-04-08  6:45                     ` Thomas Monjalon
2019-04-08  6:45                       ` Thomas Monjalon
2019-04-09  6:33                       ` Varghese, Vipin
2019-04-09  6:33                         ` Varghese, Vipin
2019-04-09  6:33               ` [dpdk-dev] [PATCH v8 0/2] guide to " Vipin Varghese
2019-04-09  6:33                 ` Vipin Varghese
2019-04-09  6:33                 ` [dpdk-dev] [PATCH v8 1/2] doc: add svg for debug and troubleshoot guide Vipin Varghese
2019-04-09  6:33                   ` Vipin Varghese
2019-04-09  6:33                 ` Vipin Varghese [this message]
2019-04-09  6:33                   ` [dpdk-dev] [PATCH v8 2/2] doc: add guide for debug and troubleshoot Vipin Varghese
2019-05-04 22:26                 ` [dpdk-dev] [PATCH v8 0/2] guide to " Thomas Monjalon
2019-05-04 22:26                   ` Thomas Monjalon
2019-04-01  4:08             ` [dpdk-dev] [PATCH v7 " Varghese, Vipin
2019-04-01  4:08               ` Varghese, Vipin
2019-02-27 11:41           ` [dpdk-dev] [PATCH v6] doc/patches: add meson build to contributing guide Thomas Monjalon
2019-02-27 12:13             ` Varghese, Vipin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190409063344.36564-3-vipin.varghese@intel.com \
    --to=vipin.varghese@intel.com \
    --cc=amit.tamboli@intel.com \
    --cc=amol.patel@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=keith.wiles@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=sanjay.padubidri@intel.com \
    --cc=shreyansh.jain@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).