DPDK patches and discussions
 help / color / mirror / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: dev@dpdk.org
Cc: shahafs@mellanox.com
Subject: [dpdk-dev] [PATCH v2] net/mlx5: add support for PF representor
Date: Tue, 16 Apr 2019 14:10:28 +0000	[thread overview]
Message-ID: <1555423828-31859-1-git-send-email-viacheslavo@mellanox.com> (raw)
Message-ID: <20190416141028.4eWinDWzwN7vSNXRDG9UKPU14lMhvWhISI3iO1XOoz8@z> (raw)
In-Reply-To: <1555084107-24692-1-git-send-email-viacheslavo@mellanox.com>

On BlueField platform we have the new entity - PF representor.
This one represents the PCI PF attached to external host on the
side of ARM. The traffic sent by the external host to the NIC
via PF will be seem by ARM on this PF representor.

This patch refactors port recognizing capability on the base of
physical port name. We have two groups of name formats. Legacy
name formats are supported by kernels before ver 5.0 (being
more precise - before the patch [1]) or before Mellanox OFED 4.6,
and new naming formats added by the patch [1].

Legacy naming formats are supported:

  - missing physical port name (no sysfs/netlink key) at all,
    master is assumed

  - decimal digits (for example "12"), representor is assumed,
    the value is the index of attached VF

New naming formats are supported:

  - "p" followed by decimal digits, for example "p2", master
    is assumed

  - "pf" followed by PF index concatenated with "vf" followed by
    VF index, for example "pf0vf1", representor is assumed.
    If index of VF is "-1" it is a special case  of host PF
    representor, this representor must be indexed in devargs
    as 65535, for example representor=[0-3,65535] will
    allow representors for VF0, VF1, VF2, VF3 and for host PF.

    Note: do not specify representor=[0-65535], it causes devargs
    processing error, because number of ports (rte_eth_dev) is
    limited.

Applications should distinguish representors and master devices
exclusively by device flag RTE_ETH_DEV_REPRESENTOR and do not
rely on switch port_id (mlx5 PMD deduces ones from representor_id)
values returned by dev_infos_get() API.

[1] https://www.spinics.net/lists/netdev/msg547007.html
    Linux-tree: c12ecc23 (Or Gerlitz 2018-04-25 17:32 +0300)
    "net/mlx5e: Move to use common phys port names for vport representors"

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

---
v2: - clarified commit log message
    - separated port attributes analyzing routines
    - port name format related routines are gathered together

v1: http://patches.dpdk.org/patch/52725/

 drivers/net/mlx5/mlx5.h        |  18 ++++-
 drivers/net/mlx5/mlx5_ethdev.c | 163 ++++++++++++++++++++++++++++++++++-------
 drivers/net/mlx5/mlx5_nl.c     |  20 +----
 3 files changed, 158 insertions(+), 43 deletions(-)

diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 14c7f3c..2069fad 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -80,11 +80,21 @@ struct mlx5_mp_param {
 /** Key string for IPC. */
 #define MLX5_MP_NAME "net_mlx5_mp"
 
+/* Recognized Infiniband device physical port name types. */
+enum mlx5_phys_port_name_type {
+	MLX5_PHYS_PORT_NAME_TYPE_NOTSET = 0, /* Not set. */
+	MLX5_PHYS_PORT_NAME_TYPE_LEGACY, /* before kernel ver < 5.0 */
+	MLX5_PHYS_PORT_NAME_TYPE_UPLINK, /* p0, kernel ver >= 5.0 */
+	MLX5_PHYS_PORT_NAME_TYPE_PFVF, /* pf0vf0, kernel ver >= 5.0 */
+	MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN, /* Unrecognized. */
+};
+
 /** Switch information returned by mlx5_nl_switch_info(). */
 struct mlx5_switch_info {
 	uint32_t master:1; /**< Master device. */
 	uint32_t representor:1; /**< Representor device. */
-	uint32_t port_name_new:1; /**< Rep. port name is in new format. */
+	enum mlx5_phys_port_name_type name_type; /** < Port name type. */
+	int32_t pf_num; /**< PF number (valid for pfxvfx format only). */
 	int32_t port_name; /**< Representor port name. */
 	uint64_t switch_id; /**< Switch identifier. */
 };
@@ -404,7 +414,11 @@ unsigned int mlx5_dev_to_port_id(const struct rte_device *dev,
 				 unsigned int port_list_n);
 int mlx5_sysfs_switch_info(unsigned int ifindex,
 			   struct mlx5_switch_info *info);
-bool mlx5_translate_port_name(const char *port_name_in,
+void mlx5_sysfs_check_switch_info(bool device_dir,
+				  struct mlx5_switch_info *switch_info);
+void mlx5_nl_check_switch_info(bool nun_vf_set,
+			       struct mlx5_switch_info *switch_info);
+void mlx5_translate_port_name(const char *port_name_in,
 			      struct mlx5_switch_info *port_info_out);
 
 /* mlx5_mac.c */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 3992918..9c24462 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1395,12 +1395,11 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 	struct mlx5_switch_info data = {
 		.master = 0,
 		.representor = 0,
-		.port_name_new = 0,
+		.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
 		.port_name = 0,
 		.switch_id = 0,
 	};
 	DIR *dir;
-	bool port_name_set = false;
 	bool port_switch_id_set = false;
 	bool device_dir = false;
 	char c;
@@ -1423,8 +1422,7 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 		ret = fscanf(file, "%s", port_name);
 		fclose(file);
 		if (ret == 1)
-			port_name_set = mlx5_translate_port_name(port_name,
-								 &data);
+			mlx5_translate_port_name(port_name, &data);
 	}
 	file = fopen(phys_switch_id, "rb");
 	if (file == NULL) {
@@ -1440,8 +1438,10 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 		closedir(dir);
 		device_dir = true;
 	}
-	data.master = port_switch_id_set && (!port_name_set || device_dir);
-	data.representor = port_switch_id_set && port_name_set && !device_dir;
+	if (port_switch_id_set) {
+		/* We have some E-Switch configuration. */
+		mlx5_sysfs_check_switch_info(device_dir, &data);
+	}
 	*info = data;
 	assert(!(data.master && data.representor));
 	if (data.master && data.representor) {
@@ -1454,41 +1454,154 @@ int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 }
 
 /**
+ * Analyze gathered port parameters via Netlink to recognize master
+ * and representor devices for E-Switch configuration.
+ *
+ * @param[in] num_vf_set
+ *   flag of presence of number of VFs port attribute.
+ * @param[inout] switch_info
+ *   Port information, including port name as a number and port name
+ *   type if recognized
+ *
+ * @return
+ *   master and representor flags are set in switch_info according to
+ *   recognized parameters (if any).
+ */
+void
+mlx5_nl_check_switch_info(bool num_vf_set,
+			  struct mlx5_switch_info *switch_info)
+{
+	switch (switch_info->name_type) {
+	case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
+		/*
+		 * Name is not recognized, assume the master,
+		 * check the number of VFs key presence.
+		 */
+		switch_info->master = num_vf_set;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
+		/*
+		 * Name is not set, this assumes the legacy naming
+		 * schema for master, just check if there is a
+		 * number of VFs key.
+		 */
+		switch_info->master = num_vf_set;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+		/* New uplink naming schema recognized. */
+		switch_info->master = 1;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
+		/* Legacy representors naming schema. */
+		switch_info->representor = !num_vf_set;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+		/* New representors naming schema. */
+		switch_info->representor = 1;
+		break;
+	}
+}
+
+/**
+ * Analyze gathered port parameters via sysfs to recognize master
+ * and representor devices for E-Switch configuration.
+ *
+ * @param[in] device_dir
+ *   flag of presence of "device" directory under port device key.
+ * @param[inout] switch_info
+ *   Port information, including port name as a number and port name
+ *   type if recognized
+ *
+ * @return
+ *   master and representor flags are set in switch_info according to
+ *   recognized parameters (if any).
+ */
+void
+mlx5_sysfs_check_switch_info(bool device_dir,
+			     struct mlx5_switch_info *switch_info)
+{
+	switch (switch_info->name_type) {
+	case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
+		/*
+		 * Name is not recognized, assume the master,
+		 * check the device directory presence.
+		 */
+		switch_info->master = device_dir;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
+		/*
+		 * Name is not set, this assumes the legacy naming
+		 * schema for master, just check if there is
+		 * a device directory.
+		 */
+		switch_info->master = device_dir;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+		/* New uplink naming schema recognized. */
+		switch_info->master = 1;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
+		/* Legacy representors naming schema. */
+		switch_info->representor = !device_dir;
+		break;
+	case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+		/* New representors naming schema. */
+		switch_info->representor = 1;
+		break;
+	}
+}
+
+/**
  * Extract port name, as a number, from sysfs or netlink information.
  *
  * @param[in] port_name_in
  *   String representing the port name.
  * @param[out] port_info_out
- *   Port information, including port name as a number.
+ *   Port information, including port name as a number and port name
+ *   type if recognized
  *
  * @return
- *   true on success, false otherwise.
+ *   port_name field set according to recognized name format.
  */
-bool
+void
 mlx5_translate_port_name(const char *port_name_in,
 			 struct mlx5_switch_info *port_info_out)
 {
 	char pf_c1, pf_c2, vf_c1, vf_c2;
 	char *end;
-	int32_t pf_num;
-	bool port_name_set = false;
+	int sc_items;
 
 	/*
 	 * Check for port-name as a string of the form pf0vf0
-	 * (support kernel ver >= 5.0)
+	 * (support kernel ver >= 5.0 or OFED ver >= 4.6).
 	 */
-	port_name_set =	(sscanf(port_name_in, "%c%c%d%c%c%d", &pf_c1, &pf_c2,
-				&pf_num, &vf_c1, &vf_c2,
-				&port_info_out->port_name) == 6);
-	if (port_name_set) {
-		port_info_out->port_name_new = 1;
-	} else {
-		/* Check for port-name as a number (support kernel ver < 5.0 */
-		errno = 0;
-		port_info_out->port_name = strtol(port_name_in, &end, 0);
-		if (!errno &&
-		    (size_t)(end - port_name_in) == strlen(port_name_in))
-			port_name_set = true;
+	sc_items = sscanf(port_name_in, "%c%c%d%c%c%d",
+			  &pf_c1, &pf_c2, &port_info_out->pf_num,
+			  &vf_c1, &vf_c2, &port_info_out->port_name);
+	if (sc_items == 6 &&
+	    pf_c1 == 'p' && pf_c2 == 'f' &&
+	    vf_c1 == 'v' && vf_c2 == 'f') {
+		port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_PFVF;
+		return;
+	}
+	/*
+	 * Check for port-name as a string of the form p0
+	 * (support kernel ver >= 5.0, or OFED ver >= 4.6).
+	 */
+	sc_items = sscanf(port_name_in, "%c%d",
+			  &pf_c1, &port_info_out->port_name);
+	if (sc_items == 2 && pf_c1 == 'p') {
+		port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
+		return;
+	}
+	/* Check for port-name as a number (support kernel ver < 5.0 */
+	errno = 0;
+	port_info_out->port_name = strtol(port_name_in, &end, 0);
+	if (!errno &&
+	    (size_t)(end - port_name_in) == strlen(port_name_in)) {
+		port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_LEGACY;
+		return;
 	}
-	return port_name_set;
+	port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
+	return;
 }
diff --git a/drivers/net/mlx5/mlx5_nl.c b/drivers/net/mlx5/mlx5_nl.c
index fd9226b..0ff9667 100644
--- a/drivers/net/mlx5/mlx5_nl.c
+++ b/drivers/net/mlx5/mlx5_nl.c
@@ -887,12 +887,11 @@ struct mlx5_nl_ifindex_data {
 	struct mlx5_switch_info info = {
 		.master = 0,
 		.representor = 0,
-		.port_name_new = 0,
+		.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
 		.port_name = 0,
 		.switch_id = 0,
 	};
 	size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
-	bool port_name_set = false;
 	bool switch_id_set = false;
 	bool num_vf_set = false;
 
@@ -910,9 +909,7 @@ struct mlx5_nl_ifindex_data {
 			num_vf_set = true;
 			break;
 		case IFLA_PHYS_PORT_NAME:
-			port_name_set =
-				mlx5_translate_port_name((char *)payload,
-							 &info);
+			mlx5_translate_port_name((char *)payload, &info);
 			break;
 		case IFLA_PHYS_SWITCH_ID:
 			info.switch_id = 0;
@@ -926,17 +923,8 @@ struct mlx5_nl_ifindex_data {
 		off += RTA_ALIGN(ra->rta_len);
 	}
 	if (switch_id_set) {
-		if (info.port_name_new) {
-			/* New representors naming schema. */
-			if (port_name_set) {
-				info.master = (info.port_name == -1);
-				info.representor = (info.port_name != -1);
-			}
-		} else {
-			/* Legacy representors naming schema. */
-			info.master = (!port_name_set || num_vf_set);
-			info.representor = port_name_set && !num_vf_set;
-		}
+		/* We have some E-Switch configuration. */
+		mlx5_nl_check_switch_info(num_vf_set, &info);
 	}
 	assert(!(info.master && info.representor));
 	memcpy(arg, &info, sizeof(info));
-- 
1.8.3.1


  parent reply	other threads:[~2019-04-16 14:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12 15:48 [dpdk-dev] [PATCH 1/1] " Viacheslav Ovsiienko
2019-04-12 15:48 ` Viacheslav Ovsiienko
2019-04-14  7:42 ` Shahaf Shuler
2019-04-14  7:42   ` Shahaf Shuler
2019-04-15  9:11   ` Slava Ovsiienko
2019-04-15  9:11     ` Slava Ovsiienko
2019-04-16  5:43     ` Shahaf Shuler
2019-04-16  5:43       ` Shahaf Shuler
2019-04-16 14:10 ` Viacheslav Ovsiienko [this message]
2019-04-16 14:10   ` [dpdk-dev] [PATCH v2] " Viacheslav Ovsiienko
2019-04-18 14:26   ` Dekel Peled
2019-04-18 14:26     ` Dekel Peled
2019-04-18 18:54   ` Shahaf Shuler
2019-04-18 18:54     ` Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1555423828-31859-1-git-send-email-viacheslavo@mellanox.com \
    --to=viacheslavo@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).