From: Yongseok Koh <yskoh@mellanox.com>
To: Ori Kam <orika@mellanox.com>
Cc: Shahaf Shuler <shahafs@mellanox.com>,
Matan Azrad <matan@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>,
Moti Haimovsky <motih@mellanox.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 3/9] net/mlx5: add Direct Rules E-Switch support
Date: Thu, 18 Apr 2019 12:11:58 +0000 [thread overview]
Message-ID: <20190418121149.GI31179@mtidpdk.mti.labs.mlnx> (raw)
In-Reply-To: <1555586930-109097-4-git-send-email-orika@mellanox.com>
On Thu, Apr 18, 2019 at 11:28:44AM +0000, Ori Kam wrote:
> This commit checks the for DR E-Switch support.
> The support is based on both Device and Kernel.
> This commit also enables the user to manualy disable this this feature.
>
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
Only one minor nit below.
With the fix,
Acked-by: Yongseok Koh <yskoh@mellanox.com>
> v2:
> * Address ML comments.
> ---
> drivers/net/mlx5/Makefile | 5 +
> drivers/net/mlx5/meson.build | 2 +
> drivers/net/mlx5/mlx5.c | 53 +++++-
> drivers/net/mlx5/mlx5.h | 12 ++
> drivers/net/mlx5/mlx5_devx_cmds.c | 44 +++++
> drivers/net/mlx5/mlx5_flow.c | 2 +-
> drivers/net/mlx5/mlx5_prm.h | 328 ++++++++++++++++++++++++++++++++++++++
> 7 files changed, 440 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> index 93bc869..2b72a33 100644
> --- a/drivers/net/mlx5/Makefile
> +++ b/drivers/net/mlx5/Makefile
> @@ -161,6 +161,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
> enum MLX5DV_DR_NS_TYPE_TERMINATING \
> $(AUTOCONF_OUTPUT)
> $Q sh -- '$<' '$@' \
> + HAVE_MLX5DV_DR_ESWITCH \
> + infiniband/mlx5dv.h \
> + enum MLX5DV_DR_NS_DOMAIN_FDB_BYPASS \
> + $(AUTOCONF_OUTPUT)
> + $Q sh -- '$<' '$@' \
> HAVE_IBV_DEVX_OBJ \
> infiniband/mlx5dv.h \
> func mlx5dv_devx_obj_create \
> diff --git a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build
> index 0037e15..9dfd28d 100644
> --- a/drivers/net/mlx5/meson.build
> +++ b/drivers/net/mlx5/meson.build
> @@ -113,6 +113,8 @@ if build
> 'MLX5DV_FLOW_ACTION_COUNTERS_DEVX' ],
> [ 'HAVE_MLX5DV_DR', 'infiniband/mlx5dv.h',
> 'MLX5DV_DR_NS_TYPE_TERMINATING' ],
> + [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h',
> + 'MLX5DV_DR_NS_DOMAIN_FDB_BYPASS' ],
> [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h',
> 'SUPPORTED_40000baseKR4_Full' ],
> [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index 9ff50df..ff24e1d 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -101,6 +101,9 @@
> /* Allow L3 VXLAN flow creation. */
> #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
>
> +/* Activate DV E-Switch flow steering. */
> +#define MLX5_DV_ESW_EN "dv_esw_en"
> +
> /* Activate DV flow steering. */
> #define MLX5_DV_FLOW_EN "dv_flow_en"
>
> @@ -344,6 +347,18 @@ struct mlx5_dev_spawn_data {
> }
> pthread_mutex_init(&sh->dv_mutex, NULL);
> sh->tx_ns = ns;
> +#ifdef HAVE_MLX5DV_DR_ESWITCH
> + if (priv->config.dv_esw_en) {
> + ns = mlx5_glue->dr_create_ns(sh->ctx,
> + MLX5DV_DR_NS_DOMAIN_FDB_BYPASS);
> + if (!ns) {
> + DRV_LOG(ERR, "FDB mlx5dv_dr_create_ns failed");
> + err = errno;
> + goto error;
> + }
> + sh->fdb_ns = ns;
> + }
> +#endif
> sh->dv_refcnt++;
> priv->dr_shared = 1;
> return 0;
> @@ -358,6 +373,10 @@ struct mlx5_dev_spawn_data {
> mlx5dv_dr_destroy_ns(sh->tx_ns);
> sh->tx_ns = NULL;
> }
> + if (sh->fdb_ns) {
> + mlx5_glue->dr_destroy_ns(sh->fdb_ns);
> + sh->fdb_ns = NULL;
> + }
> return err;
> #else
> (void)priv;
> @@ -393,6 +412,12 @@ struct mlx5_dev_spawn_data {
> mlx5dv_dr_destroy_ns(sh->tx_ns);
> sh->tx_ns = NULL;
> }
> +#ifdef HAVE_MLX5DV_DR_ESWITCH
> + if (sh->fdb_ns) {
> + mlx5_glue->dr_destroy_ns(sh->fdb_ns);
> + sh->fdb_ns = NULL;
> + }
> +#endif
> pthread_mutex_destroy(&sh->dv_mutex);
> #else
> (void)priv;
> @@ -861,6 +886,8 @@ struct mlx5_dev_spawn_data {
> config->l3_vxlan_en = !!tmp;
> } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
> config->vf_nl_en = !!tmp;
> + } else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
> + config->dv_esw_en = !!tmp;
> } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
> config->dv_flow_en = !!tmp;
> } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
> @@ -905,6 +932,7 @@ struct mlx5_dev_spawn_data {
> MLX5_RX_VEC_EN,
> MLX5_L3_VXLAN_EN,
> MLX5_VF_NL_EN,
> + MLX5_DV_ESW_EN,
> MLX5_DV_FLOW_EN,
> MLX5_MR_EXT_MEMSEG_EN,
> MLX5_REPRESENTOR,
> @@ -1458,11 +1486,6 @@ struct mlx5_dev_spawn_data {
> priv->tcf_context = NULL;
> }
> }
> - if (config.dv_flow_en) {
> - err = mlx5_alloc_shared_dr(priv);
> - if (err)
> - goto error;
> - }
> TAILQ_INIT(&priv->flows);
> TAILQ_INIT(&priv->ctrl_flows);
> /* Hint libmlx5 to use PMD allocator for data plane resources */
> @@ -1484,8 +1507,27 @@ struct mlx5_dev_spawn_data {
> * Verbs context returned by ibv_open_device().
> */
> mlx5_link_update(eth_dev, 0);
> +#ifdef HAVE_IBV_DEVX_OBJ
> + err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
> + if (err) {
> + err = -err;
> + goto error;
> + }
> +#endif
> +#ifdef HAVE_MLX5DV_DR_ESWITCH
> + if (!(config.hca_attr.eswitch_manager && config.dv_flow_en &&
> + (switch_info->representor || switch_info->master)))
> + config.dv_esw_en = 0;
> +#else
> + config.dv_esw_en = 0;
> +#endif
> /* Store device configuration on private structure. */
> priv->config = config;
> + if (config.dv_flow_en) {
> + err = mlx5_alloc_shared_dr(priv);
> + if (err)
> + goto error;
> + }
> /* Supported Verbs flow priority number detection. */
> err = mlx5_flow_discover_priorities(eth_dev);
> if (err < 0) {
> @@ -1876,6 +1918,7 @@ struct mlx5_dev_spawn_data {
> .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
> .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
> },
> + .dv_esw_en = 1,
> };
> /* Device specific configuration. */
> switch (pci_dev->id.device_id) {
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 14c7f3c..b9946f6 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -138,6 +138,11 @@ struct mlx5_devx_counter_set {
> int id; /* Flow counter ID */
> };
>
> +/* HCA attributes. */
> +struct mlx5_hca_attr {
> + uint32_t eswitch_manager:1;
> +};
> +
> /* Flow list . */
> TAILQ_HEAD(mlx5_flows, rte_flow);
>
> @@ -171,6 +176,7 @@ struct mlx5_dev_config {
> /* Whether memseg should be extended for MR creation. */
> unsigned int l3_vxlan_en:1; /* Enable L3 VXLAN flow creation. */
> unsigned int vf_nl_en:1; /* Enable Netlink requests in VF mode. */
> + unsigned int dv_esw_en:1; /* Enable E-Switch DV flow. */
> unsigned int dv_flow_en:1; /* Enable DV flow. */
> unsigned int swp:1; /* Tx generic tunnel checksum and TSO offload. */
> unsigned int devx:1; /* Whether devx interface is available or not. */
> @@ -192,6 +198,7 @@ struct mlx5_dev_config {
> int txqs_inline; /* Queue number threshold for inlining. */
> int txqs_vec; /* Queue number threshold for vectorized Tx. */
> int inline_max_packet_sz; /* Max packet size for inlining. */
> + struct mlx5_hca_attr hca_attr; /* HCA attributes. */
> };
>
> /**
> @@ -241,6 +248,7 @@ struct mlx5_flow_tbl_resource {
> };
>
> #define MLX5_MAX_TABLES 1024
> +#define MLX5_MAX_TABLES_FDB 32
> #define MLX5_GROUP_FACTOR 1
>
> /*
> @@ -260,6 +268,8 @@ struct mlx5_ibv_shared {
> /* Shared DV/DR flow data section. */
> pthread_mutex_t dv_mutex; /* DV context mutex. */
> uint32_t dv_refcnt; /* DV/DR data reference counter. */
> + void *fdb_ns; /* FDB Direct Rules name space handle. */
> + struct mlx5_flow_tbl_resource fdb_tbl[MLX5_MAX_TABLES_FDB];
Please add a comment for fdb_tbl.
> void *rx_ns; /* RX Direct Rules name space handle. */
> struct mlx5_flow_tbl_resource rx_tbl[MLX5_MAX_TABLES];
> /* RX Direct Rules tables. */
> @@ -539,4 +549,6 @@ int mlx5_devx_cmd_flow_counter_alloc(struct ibv_context *ctx,
> int mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_counter_set *dcx,
> int clear,
> uint64_t *pkts, uint64_t *bytes);
> +int mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
> + struct mlx5_hca_attr *attr);
> #endif /* RTE_PMD_MLX5_H_ */
> diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c b/drivers/net/mlx5/mlx5_devx_cmds.c
> index a9dff58..e5776c4 100644
> --- a/drivers/net/mlx5/mlx5_devx_cmds.c
> +++ b/drivers/net/mlx5/mlx5_devx_cmds.c
> @@ -105,3 +105,47 @@ int mlx5_devx_cmd_flow_counter_free(struct mlx5dv_devx_obj *obj)
> *bytes = MLX5_GET64(traffic_counter, stats, octets);
> return 0;
> }
> +
> +/**
> + * Query HCA attributes.
> + * Using those attributes we can check on run time if the device
> + * is having the required capabilities.
> + *
> + * @param[in] ctx
> + * ibv contexts returned from mlx5dv_open_device.
> + * @param[out] attr
> + * Attributes device values.
> + *
> + * @return
> + * 0 on success, a negative value otherwise.
> + */
> +int
> +mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
> + struct mlx5_hca_attr *attr)
> +{
> + uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
> + uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
> + void *hcattr;
> + int status, syndrome, rc;
> +
> + MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
> + MLX5_SET(query_hca_cap_in, in, op_mod,
> + MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
> + MLX5_HCA_CAP_OPMOD_GET_CUR);
> +
> + rc = mlx5_glue->devx_general_cmd(ctx,
> + in, sizeof(in), out, sizeof(out));
> + if (rc)
> + return rc;
> + status = MLX5_GET(query_hca_cap_out, out, status);
> + syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
> + if (status) {
> + DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
> + "status %x, syndrome = %x",
> + status, syndrome);
> + return -1;
> + }
> + hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
> + attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager);
> + return 0;
> +}
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index a0683ee..b1effda 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -1784,7 +1784,7 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
> struct mlx5_priv *priv = dev->data->dev_private;
> enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
>
> - if (attr->transfer)
> + if (attr->transfer && !priv->config.dv_esw_en)
> type = MLX5_FLOW_TYPE_TCF;
> else
> type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
> diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
> index b15266f..8c42380 100644
> --- a/drivers/net/mlx5/mlx5_prm.h
> +++ b/drivers/net/mlx5/mlx5_prm.h
> @@ -529,6 +529,7 @@ enum {
> };
>
> enum {
> + MLX5_CMD_OP_QUERY_HCA_CAP = 0x100,
> MLX5_CMD_OP_ALLOC_FLOW_COUNTER = 0x939,
> MLX5_CMD_OP_QUERY_FLOW_COUNTER = 0x93b,
> };
> @@ -591,6 +592,333 @@ struct mlx5_ifc_query_flow_counter_in_bits {
> u8 flow_counter_id[0x20];
> };
>
> +enum {
> + MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE = 0x0 << 1,
> + MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP = 0xc << 1,
> +};
> +
> +enum {
> + MLX5_HCA_CAP_OPMOD_GET_MAX = 0,
> + MLX5_HCA_CAP_OPMOD_GET_CUR = 1,
> +};
> +
> +struct mlx5_ifc_cmd_hca_cap_bits {
> + u8 reserved_at_0[0x30];
> + u8 vhca_id[0x10];
> + u8 reserved_at_40[0x40];
> + u8 log_max_srq_sz[0x8];
> + u8 log_max_qp_sz[0x8];
> + u8 reserved_at_90[0xb];
> + u8 log_max_qp[0x5];
> + u8 reserved_at_a0[0xb];
> + u8 log_max_srq[0x5];
> + u8 reserved_at_b0[0x10];
> + u8 reserved_at_c0[0x8];
> + u8 log_max_cq_sz[0x8];
> + u8 reserved_at_d0[0xb];
> + u8 log_max_cq[0x5];
> + u8 log_max_eq_sz[0x8];
> + u8 reserved_at_e8[0x2];
> + u8 log_max_mkey[0x6];
> + u8 reserved_at_f0[0x8];
> + u8 dump_fill_mkey[0x1];
> + u8 reserved_at_f9[0x3];
> + u8 log_max_eq[0x4];
> + u8 max_indirection[0x8];
> + u8 fixed_buffer_size[0x1];
> + u8 log_max_mrw_sz[0x7];
> + u8 force_teardown[0x1];
> + u8 reserved_at_111[0x1];
> + u8 log_max_bsf_list_size[0x6];
> + u8 umr_extended_translation_offset[0x1];
> + u8 null_mkey[0x1];
> + u8 log_max_klm_list_size[0x6];
> + u8 reserved_at_120[0xa];
> + u8 log_max_ra_req_dc[0x6];
> + u8 reserved_at_130[0xa];
> + u8 log_max_ra_res_dc[0x6];
> + u8 reserved_at_140[0xa];
> + u8 log_max_ra_req_qp[0x6];
> + u8 reserved_at_150[0xa];
> + u8 log_max_ra_res_qp[0x6];
> + u8 end_pad[0x1];
> + u8 cc_query_allowed[0x1];
> + u8 cc_modify_allowed[0x1];
> + u8 start_pad[0x1];
> + u8 cache_line_128byte[0x1];
> + u8 reserved_at_165[0xa];
> + u8 qcam_reg[0x1];
> + u8 gid_table_size[0x10];
> + u8 out_of_seq_cnt[0x1];
> + u8 vport_counters[0x1];
> + u8 retransmission_q_counters[0x1];
> + u8 debug[0x1];
> + u8 modify_rq_counter_set_id[0x1];
> + u8 rq_delay_drop[0x1];
> + u8 max_qp_cnt[0xa];
> + u8 pkey_table_size[0x10];
> + u8 vport_group_manager[0x1];
> + u8 vhca_group_manager[0x1];
> + u8 ib_virt[0x1];
> + u8 eth_virt[0x1];
> + u8 vnic_env_queue_counters[0x1];
> + u8 ets[0x1];
> + u8 nic_flow_table[0x1];
> + u8 eswitch_manager[0x1];
> + u8 device_memory[0x1];
> + u8 mcam_reg[0x1];
> + u8 pcam_reg[0x1];
> + u8 local_ca_ack_delay[0x5];
> + u8 port_module_event[0x1];
> + u8 enhanced_error_q_counters[0x1];
> + u8 ports_check[0x1];
> + u8 reserved_at_1b3[0x1];
> + u8 disable_link_up[0x1];
> + u8 beacon_led[0x1];
> + u8 port_type[0x2];
> + u8 num_ports[0x8];
> + u8 reserved_at_1c0[0x1];
> + u8 pps[0x1];
> + u8 pps_modify[0x1];
> + u8 log_max_msg[0x5];
> + u8 reserved_at_1c8[0x4];
> + u8 max_tc[0x4];
> + u8 temp_warn_event[0x1];
> + u8 dcbx[0x1];
> + u8 general_notification_event[0x1];
> + u8 reserved_at_1d3[0x2];
> + u8 fpga[0x1];
> + u8 rol_s[0x1];
> + u8 rol_g[0x1];
> + u8 reserved_at_1d8[0x1];
> + u8 wol_s[0x1];
> + u8 wol_g[0x1];
> + u8 wol_a[0x1];
> + u8 wol_b[0x1];
> + u8 wol_m[0x1];
> + u8 wol_u[0x1];
> + u8 wol_p[0x1];
> + u8 stat_rate_support[0x10];
> + u8 reserved_at_1f0[0xc];
> + u8 cqe_version[0x4];
> + u8 compact_address_vector[0x1];
> + u8 striding_rq[0x1];
> + u8 reserved_at_202[0x1];
> + u8 ipoib_enhanced_offloads[0x1];
> + u8 ipoib_basic_offloads[0x1];
> + u8 reserved_at_205[0x1];
> + u8 repeated_block_disabled[0x1];
> + u8 umr_modify_entity_size_disabled[0x1];
> + u8 umr_modify_atomic_disabled[0x1];
> + u8 umr_indirect_mkey_disabled[0x1];
> + u8 umr_fence[0x2];
> + u8 reserved_at_20c[0x3];
> + u8 drain_sigerr[0x1];
> + u8 cmdif_checksum[0x2];
> + u8 sigerr_cqe[0x1];
> + u8 reserved_at_213[0x1];
> + u8 wq_signature[0x1];
> + u8 sctr_data_cqe[0x1];
> + u8 reserved_at_216[0x1];
> + u8 sho[0x1];
> + u8 tph[0x1];
> + u8 rf[0x1];
> + u8 dct[0x1];
> + u8 qos[0x1];
> + u8 eth_net_offloads[0x1];
> + u8 roce[0x1];
> + u8 atomic[0x1];
> + u8 reserved_at_21f[0x1];
> + u8 cq_oi[0x1];
> + u8 cq_resize[0x1];
> + u8 cq_moderation[0x1];
> + u8 reserved_at_223[0x3];
> + u8 cq_eq_remap[0x1];
> + u8 pg[0x1];
> + u8 block_lb_mc[0x1];
> + u8 reserved_at_229[0x1];
> + u8 scqe_break_moderation[0x1];
> + u8 cq_period_start_from_cqe[0x1];
> + u8 cd[0x1];
> + u8 reserved_at_22d[0x1];
> + u8 apm[0x1];
> + u8 vector_calc[0x1];
> + u8 umr_ptr_rlky[0x1];
> + u8 imaicl[0x1];
> + u8 reserved_at_232[0x4];
> + u8 qkv[0x1];
> + u8 pkv[0x1];
> + u8 set_deth_sqpn[0x1];
> + u8 reserved_at_239[0x3];
> + u8 xrc[0x1];
> + u8 ud[0x1];
> + u8 uc[0x1];
> + u8 rc[0x1];
> + u8 uar_4k[0x1];
> + u8 reserved_at_241[0x9];
> + u8 uar_sz[0x6];
> + u8 reserved_at_250[0x8];
> + u8 log_pg_sz[0x8];
> + u8 bf[0x1];
> + u8 driver_version[0x1];
> + u8 pad_tx_eth_packet[0x1];
> + u8 reserved_at_263[0x8];
> + u8 log_bf_reg_size[0x5];
> + u8 reserved_at_270[0xb];
> + u8 lag_master[0x1];
> + u8 num_lag_ports[0x4];
> + u8 reserved_at_280[0x10];
> + u8 max_wqe_sz_sq[0x10];
> + u8 reserved_at_2a0[0x10];
> + u8 max_wqe_sz_rq[0x10];
> + u8 max_flow_counter_31_16[0x10];
> + u8 max_wqe_sz_sq_dc[0x10];
> + u8 reserved_at_2e0[0x7];
> + u8 max_qp_mcg[0x19];
> + u8 reserved_at_300[0x10];
> + u8 flow_counter_bulk_alloc[0x08];
> + u8 log_max_mcg[0x8];
> + u8 reserved_at_320[0x3];
> + u8 log_max_transport_domain[0x5];
> + u8 reserved_at_328[0x3];
> + u8 log_max_pd[0x5];
> + u8 reserved_at_330[0xb];
> + u8 log_max_xrcd[0x5];
> + u8 nic_receive_steering_discard[0x1];
> + u8 receive_discard_vport_down[0x1];
> + u8 transmit_discard_vport_down[0x1];
> + u8 reserved_at_343[0x5];
> + u8 log_max_flow_counter_bulk[0x8];
> + u8 max_flow_counter_15_0[0x10];
> + u8 reserved_at_360[0x3];
> + u8 log_max_rq[0x5];
> + u8 reserved_at_368[0x3];
> + u8 log_max_sq[0x5];
> + u8 reserved_at_370[0x3];
> + u8 log_max_tir[0x5];
> + u8 reserved_at_378[0x3];
> + u8 log_max_tis[0x5];
> + u8 basic_cyclic_rcv_wqe[0x1];
> + u8 reserved_at_381[0x2];
> + u8 log_max_rmp[0x5];
> + u8 reserved_at_388[0x3];
> + u8 log_max_rqt[0x5];
> + u8 reserved_at_390[0x3];
> + u8 log_max_rqt_size[0x5];
> + u8 reserved_at_398[0x3];
> + u8 log_max_tis_per_sq[0x5];
> + u8 ext_stride_num_range[0x1];
> + u8 reserved_at_3a1[0x2];
> + u8 log_max_stride_sz_rq[0x5];
> + u8 reserved_at_3a8[0x3];
> + u8 log_min_stride_sz_rq[0x5];
> + u8 reserved_at_3b0[0x3];
> + u8 log_max_stride_sz_sq[0x5];
> + u8 reserved_at_3b8[0x3];
> + u8 log_min_stride_sz_sq[0x5];
> + u8 hairpin[0x1];
> + u8 reserved_at_3c1[0x2];
> + u8 log_max_hairpin_queues[0x5];
> + u8 reserved_at_3c8[0x3];
> + u8 log_max_hairpin_wq_data_sz[0x5];
> + u8 reserved_at_3d0[0x3];
> + u8 log_max_hairpin_num_packets[0x5];
> + u8 reserved_at_3d8[0x3];
> + u8 log_max_wq_sz[0x5];
> + u8 nic_vport_change_event[0x1];
> + u8 disable_local_lb_uc[0x1];
> + u8 disable_local_lb_mc[0x1];
> + u8 log_min_hairpin_wq_data_sz[0x5];
> + u8 reserved_at_3e8[0x3];
> + u8 log_max_vlan_list[0x5];
> + u8 reserved_at_3f0[0x3];
> + u8 log_max_current_mc_list[0x5];
> + u8 reserved_at_3f8[0x3];
> + u8 log_max_current_uc_list[0x5];
> + u8 general_obj_types[0x40];
> + u8 reserved_at_440[0x20];
> + u8 reserved_at_460[0x10];
> + u8 max_num_eqs[0x10];
> + u8 reserved_at_480[0x3];
> + u8 log_max_l2_table[0x5];
> + u8 reserved_at_488[0x8];
> + u8 log_uar_page_sz[0x10];
> + u8 reserved_at_4a0[0x20];
> + u8 device_frequency_mhz[0x20];
> + u8 device_frequency_khz[0x20];
> + u8 reserved_at_500[0x20];
> + u8 num_of_uars_per_page[0x20];
> + u8 flex_parser_protocols[0x20];
> + u8 reserved_at_560[0x20];
> + u8 reserved_at_580[0x3c];
> + u8 mini_cqe_resp_stride_index[0x1];
> + u8 cqe_128_always[0x1];
> + u8 cqe_compression_128[0x1];
> + u8 cqe_compression[0x1];
> + u8 cqe_compression_timeout[0x10];
> + u8 cqe_compression_max_num[0x10];
> + u8 reserved_at_5e0[0x10];
> + u8 tag_matching[0x1];
> + u8 rndv_offload_rc[0x1];
> + u8 rndv_offload_dc[0x1];
> + u8 log_tag_matching_list_sz[0x5];
> + u8 reserved_at_5f8[0x3];
> + u8 log_max_xrq[0x5];
> + u8 affiliate_nic_vport_criteria[0x8];
> + u8 native_port_num[0x8];
> + u8 num_vhca_ports[0x8];
> + u8 reserved_at_618[0x6];
> + u8 sw_owner_id[0x1];
> + u8 reserved_at_61f[0x1e1];
> +};
> +
> +struct mlx5_ifc_qos_cap_bits {
> + u8 packet_pacing[0x1];
> + u8 esw_scheduling[0x1];
> + u8 esw_bw_share[0x1];
> + u8 esw_rate_limit[0x1];
> + u8 reserved_at_4[0x1];
> + u8 packet_pacing_burst_bound[0x1];
> + u8 packet_pacing_typical_size[0x1];
> + u8 flow_meter_srtcm[0x1];
> + u8 reserved_at_8[0x8];
> + u8 log_max_flow_meter[0x8];
> + u8 flow_meter_reg_id[0x8];
> + u8 reserved_at_25[0x20];
> + u8 packet_pacing_max_rate[0x20];
> + u8 packet_pacing_min_rate[0x20];
> + u8 reserved_at_80[0x10];
> + u8 packet_pacing_rate_table_size[0x10];
> + u8 esw_element_type[0x10];
> + u8 esw_tsar_type[0x10];
> + u8 reserved_at_c0[0x10];
> + u8 max_qos_para_vport[0x10];
> + u8 max_tsar_bw_share[0x20];
> + u8 reserved_at_100[0x6e8];
> +};
> +
> +union mlx5_ifc_hca_cap_union_bits {
> + struct mlx5_ifc_cmd_hca_cap_bits cmd_hca_cap;
> + struct mlx5_ifc_qos_cap_bits qos_cap;
> + u8 reserved_at_0[0x8000];
> +};
> +
> +struct mlx5_ifc_query_hca_cap_out_bits {
> + u8 status[0x8];
> + u8 reserved_at_8[0x18];
> + u8 syndrome[0x20];
> + u8 reserved_at_40[0x40];
> + union mlx5_ifc_hca_cap_union_bits capability;
> +};
> +
> +struct mlx5_ifc_query_hca_cap_in_bits {
> + u8 opcode[0x10];
> + u8 reserved_at_10[0x10];
> + u8 reserved_at_20[0x10];
> + u8 op_mod[0x10];
> + u8 reserved_at_40[0x40];
> +};
> +
> /* CQE format mask. */
> #define MLX5E_CQE_FORMAT_MASK 0xc
>
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2019-04-18 12:12 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-14 21:12 [dpdk-dev] [PATCH 0/9] net/mlx5: add Direct Verbs " Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-16 23:47 ` Yongseok Koh
2019-04-16 23:47 ` Yongseok Koh
2019-04-14 21:12 ` [dpdk-dev] [PATCH 2/9] net/mlx5: fix menson compilation with Direct Rules Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 0:01 ` Yongseok Koh
2019-04-17 0:01 ` Yongseok Koh
2019-04-17 0:34 ` Yongseok Koh
2019-04-17 0:34 ` Yongseok Koh
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 3/9] net/mlx5: add Direct Rules configuration support Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 1:42 ` Yongseok Koh
2019-04-17 1:42 ` Yongseok Koh
2019-04-17 6:19 ` Ori Kam
2019-04-17 6:19 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 23:59 ` Yongseok Koh
2019-04-17 23:59 ` Yongseok Koh
2019-04-18 4:40 ` Ori Kam
2019-04-18 4:40 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:19 ` Yongseok Koh
2019-04-18 0:19 ` Yongseok Koh
2019-04-18 4:43 ` Ori Kam
2019-04-18 4:43 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:38 ` Yongseok Koh
2019-04-18 0:38 ` Yongseok Koh
2019-04-18 4:57 ` Ori Kam
2019-04-18 4:57 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 7/9] net/mlx5: add port ID action to Direct Verbs Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:59 ` Yongseok Koh
2019-04-18 0:59 ` Yongseok Koh
2019-04-18 5:06 ` Ori Kam
2019-04-18 5:06 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 1:16 ` Yongseok Koh
2019-04-18 1:16 ` Yongseok Koh
2019-04-18 5:13 ` Ori Kam
2019-04-18 5:13 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 1:28 ` Yongseok Koh
2019-04-18 1:28 ` Yongseok Koh
2019-04-18 5:15 ` Ori Kam
2019-04-18 5:15 ` Ori Kam
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 0/9] net/mlx5: add Direct Verbs E-Switch support Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:06 ` Yongseok Koh
2019-04-18 12:06 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 2/9] net/mlx5: fix meson build for Direct Rules Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:09 ` Yongseok Koh
2019-04-18 12:09 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 3/9] net/mlx5: add Direct Rules E-Switch support Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:11 ` Yongseok Koh [this message]
2019-04-18 12:11 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:16 ` Yongseok Koh
2019-04-18 12:16 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:17 ` Yongseok Koh
2019-04-18 12:17 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 7/9] net/mlx5: add E-Switch port ID action to Direct Verbs Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:21 ` Yongseok Koh
2019-04-18 12:21 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:28 ` Yongseok Koh
2019-04-18 12:28 ` Yongseok Koh
2019-04-18 13:15 ` [dpdk-dev] [PATCH v3 0/9] net/mlx5: add Direct Verbs E-Switch support Ori Kam
2019-04-18 13:15 ` Ori Kam
2019-04-18 13:15 ` [dpdk-dev] [PATCH v3 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-18 13:15 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 2/9] net/mlx5: fix meson build for Direct Rules Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 3/9] net/mlx5: add Direct Rules E-Switch support Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 7/9] net/mlx5: add E-Switch port ID action to Direct Verbs Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:23 ` Yongseok Koh
2019-04-18 13:23 ` Yongseok Koh
2019-04-18 13:47 ` Ori Kam
2019-04-18 13:47 ` Ori Kam
2019-04-18 18:14 ` Shahaf Shuler
2019-04-18 18:14 ` Shahaf Shuler
2019-04-18 18:55 ` [dpdk-dev] [PATCH v3 0/9] net/mlx5: add Direct Verbs E-Switch support Shahaf Shuler
2019-04-18 18:55 ` Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190418121149.GI31179@mtidpdk.mti.labs.mlnx \
--to=yskoh@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=motih@mellanox.com \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).