From: Ye Xiaolong <xiaolong.ye@intel.com>
To: Xiaoyun Li <xiaoyun.li@intel.com>
Cc: jingjing.wu@intel.com, keith.wiles@intel.com,
cunming.liang@intel.com, omkar.maslekar@intel.com, dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH 4/6] examples/ntb: enable an example for ntb
Date: Tue, 4 Jun 2019 14:48:01 +0800 [thread overview]
Message-ID: <20190604064801.GA94383@intel.com> (raw)
In-Reply-To: <20190603084611.40931-5-xiaoyun.li@intel.com>
On 06/03, Xiaoyun Li wrote:
>Enable an example for rawdev ntb. Support interactive mode to send
>file on one host and receive file from another host. The command line
>would be 'send [filepath]' and 'receive [filepath]'.
>
>But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
>and dequeue functions and only support transmitting file no more than 4M.
>
>Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
>---
> drivers/raw/ntb_rawdev/ntb_rawdev.c | 25 +-
> examples/Makefile | 1 +
> examples/meson.build | 21 +-
> examples/ntb/Makefile | 68 ++++++
> examples/ntb/meson.build | 16 ++
> examples/ntb/ntb_fwd.c | 364 ++++++++++++++++++++++++++++
> 6 files changed, 477 insertions(+), 18 deletions(-)
> create mode 100644 examples/ntb/Makefile
> create mode 100644 examples/ntb/meson.build
> create mode 100644 examples/ntb/ntb_fwd.c
>
>diff --git a/drivers/raw/ntb_rawdev/ntb_rawdev.c b/drivers/raw/ntb_rawdev/ntb_rawdev.c
>index 35bc34c54..1824842f2 100644
>--- a/drivers/raw/ntb_rawdev/ntb_rawdev.c
>+++ b/drivers/raw/ntb_rawdev/ntb_rawdev.c
>@@ -212,11 +212,16 @@ ntb_enqueue_bufs(struct rte_rawdev *dev,
> unsigned int count,
> rte_rawdev_obj_t context)
> {
>- RTE_SET_USED(dev);
>- RTE_SET_USED(buffers);
>- RTE_SET_USED(count);
>- RTE_SET_USED(context);
>+ /* Not FIFO right now. Just for test memory write. */
>+ struct ntb_hw *hw = dev->dev_private;
>+ uint64_t bar_addr, size;
>+ unsigned int i;
>+
>+ bar_addr = (*hw->ntb_ops->get_peer_mw_addr)(dev, 0);
check the func pointer before calling it.
>+ size = (uint64_t)context;
>
>+ for (i = 0; i < count; i++)
>+ rte_memcpy((void *)bar_addr, buffers[i]->buf_addr, size);
> return 0;
> }
>
>@@ -226,11 +231,15 @@ ntb_dequeue_bufs(struct rte_rawdev *dev,
> unsigned int count,
> rte_rawdev_obj_t context)
> {
>- RTE_SET_USED(dev);
>- RTE_SET_USED(buffers);
>- RTE_SET_USED(count);
>- RTE_SET_USED(context);
>+ /* Not FIFO. Just for test memory read. */
>+ struct ntb_hw *hw = dev->dev_private;
>+ uint64_t size;
>+ unsigned int i;
>+
>+ size = (uint64_t)context;
>
>+ for (i = 0; i < count; i++)
>+ rte_memcpy(buffers[i]->buf_addr, hw->mz[i]->addr, size);
> return 0;
> }
>
>diff --git a/examples/Makefile b/examples/Makefile
>index 7562424d9..de11dd487 100644
>--- a/examples/Makefile
>+++ b/examples/Makefile
>@@ -53,6 +53,7 @@ DIRS-y += link_status_interrupt
> DIRS-$(CONFIG_RTE_LIBRTE_LPM) += load_balancer
> DIRS-y += multi_process
> DIRS-y += netmap_compat/bridge
>+DIRS-y += ntb
> DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += packet_ordering
> ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
> DIRS-y += performance-thread
>diff --git a/examples/meson.build b/examples/meson.build
>index de35656d4..dda4a07a8 100644
>--- a/examples/meson.build
>+++ b/examples/meson.build
>@@ -25,16 +25,17 @@ all_examples = [
> 'l3fwd-acl', 'l3fwd-power',
> 'l3fwd-vf', 'link_status_interrupt',
> 'load_balancer', 'multi_process',
>- 'netmap_compat', 'packet_ordering',
>- 'performance-thread', 'ptpclient',
>- 'qos_meter', 'qos_sched',
>- 'quota_watermark', 'rxtx_callbacks',
>- 'server_node_efd', 'service_cores',
>- 'skeleton', 'tep_termination',
>- 'timer', 'vdpa',
>- 'vhost', 'vhost_crypto',
>- 'vhost_scsi', 'vm_power_manager',
>- 'vmdq', 'vmdq_dcb',
>+ 'netmap_compat', 'ntb',
>+ 'packet_ordering', 'performance-thread',
>+ 'ptpclient', 'qos_meter',
>+ 'qos_sched', 'quota_watermark',
>+ 'rxtx_callbacks', 'server_node_efd',
>+ 'service_cores', 'skeleton',
>+ 'tep_termination', 'timer',
>+ 'vdpa', 'vhost',
>+ 'vhost_crypto', 'vhost_scsi',
>+ 'vm_power_manager', 'vmdq',
>+ 'vmdq_dcb',
> ]
> # install all example code on install - irrespective of whether the example in
> # question is to be built as part of this build or not.
>diff --git a/examples/ntb/Makefile b/examples/ntb/Makefile
>new file mode 100644
>index 000000000..5ddd9b95f
>--- /dev/null
>+++ b/examples/ntb/Makefile
>@@ -0,0 +1,68 @@
>+# SPDX-License-Identifier: BSD-3-Clause
>+# Copyright(c) 2019 Intel Corporation
>+
>+# binary name
>+APP = ntb_fwd
>+
>+# all source are stored in SRCS-y
>+SRCS-y := ntb_fwd.c
>+
>+# Build using pkg-config variables if possible
>+$(shell pkg-config --exists libdpdk)
>+ifeq ($(.SHELLSTATUS),0)
>+
>+all: shared
>+.PHONY: shared static
>+shared: build/$(APP)-shared
>+ ln -sf $(APP)-shared build/$(APP)
>+static: build/$(APP)-static
>+ ln -sf $(APP)-static build/$(APP)
>+
>+CFLAGS += -D_FILE_OFFSET_BITS=64
>+LDFLAGS += -pthread
>+
>+PC_FILE := $(shell pkg-config --path libdpdk)
>+CFLAGS += -O3 $(shell pkg-config --cflags libdpdk)
>+LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk)
>+LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk)
>+
>+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
>+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
>+
>+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
>+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
>+
>+build:
>+ @mkdir -p $@
>+
>+.PHONY: clean
>+clean:
>+ rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
>+ rmdir --ignore-fail-on-non-empty build
>+
>+else # Build using legacy build system
>+
>+ifeq ($(RTE_SDK),)
>+$(error "Please define RTE_SDK environment variable")
>+endif
>+
>+# Default target, can be overridden by command line or environment
>+RTE_TARGET ?= x86_64-native-linuxapp-gcc
>+
>+include $(RTE_SDK)/mk/rte.vars.mk
>+
>+ifneq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
>+$(info This application can only operate in a linuxapp environment, \
>+please change the definition of the RTE_TARGET environment variable)
>+all:
>+else
>+
>+CFLAGS += -D_FILE_OFFSET_BITS=64
>+CFLAGS += -O2
>+CFLAGS += $(WERROR_FLAGS)
>+CFLAGS += -DALLOW_EXPERIMENTAL_API
>+
>+include $(RTE_SDK)/mk/rte.extapp.mk
>+
>+endif
>+endif
>diff --git a/examples/ntb/meson.build b/examples/ntb/meson.build
>new file mode 100644
>index 000000000..9a6288f4f
>--- /dev/null
>+++ b/examples/ntb/meson.build
>@@ -0,0 +1,16 @@
>+# SPDX-License-Identifier: BSD-3-Clause
>+# Copyright(c) 2019 Intel Corporation
>+
>+# meson file, for building this example as part of a main DPDK build.
>+#
>+# To build this example as a standalone application with an already-installed
>+# DPDK instance, use 'make'
>+
>+if host_machine.system() != 'linux'
>+ build = false
>+endif
>+deps += 'rawdev'
>+cflags += ['-D_FILE_OFFSET_BITS=64']
>+sources = files(
>+ 'ntb_fwd.c'
>+)
>diff --git a/examples/ntb/ntb_fwd.c b/examples/ntb/ntb_fwd.c
>new file mode 100644
>index 000000000..7835d817a
>--- /dev/null
>+++ b/examples/ntb/ntb_fwd.c
>@@ -0,0 +1,364 @@
>+/* SPDX-License-Identifier: BSD-3-Clause
>+ * Copyright(c) 2019 Intel Corporation
>+ */
>+#include <stdint.h>
>+#include <stdio.h>
>+#include <unistd.h>
>+#include <signal.h>
>+#include <string.h>
>+#include <getopt.h>
>+
>+#include <cmdline_parse_string.h>
>+#include <cmdline_socket.h>
>+#include <cmdline.h>
>+#include <rte_common.h>
>+#include <rte_rawdev.h>
>+#include <rte_lcore.h>
>+
>+static uint64_t max_file_size = 0x400000;
>+static uint8_t interactive = 1;
>+static uint16_t dev_id;
>+
>+/* *** Help command with introduction. *** */
>+struct cmd_help_result {
>+ cmdline_fixed_string_t help;
>+};
>+
>+static void cmd_help_parsed(__attribute__((unused)) void *parsed_result,
>+ struct cmdline *cl,
>+ __attribute__((unused)) void *data)
>+{
>+ cmdline_printf(
>+ cl,
>+ "\n"
>+ "The following commands are currently available:\n\n"
>+ "Control:\n"
>+ " quit :"
>+ " Quit the application.\n"
>+ "\nFile transmit:\n"
>+ " send [path] :"
>+ " Send [path] file. (No more than %lu)\n"
>+ " recv [path] :"
>+ " Receive file to [path]. Make sure sending is done"
>+ " on the other side.\n",
>+ max_file_size
>+ );
>+
>+}
>+
>+cmdline_parse_token_string_t cmd_help_help =
>+ TOKEN_STRING_INITIALIZER(struct cmd_help_result, help, "help");
>+
>+cmdline_parse_inst_t cmd_help = {
>+ .f = cmd_help_parsed,
>+ .data = NULL,
>+ .help_str = "show help",
>+ .tokens = {
>+ (void *)&cmd_help_help,
>+ NULL,
>+ },
>+};
>+
>+/* *** QUIT *** */
>+struct cmd_quit_result {
>+ cmdline_fixed_string_t quit;
>+};
>+
>+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
>+ struct cmdline *cl,
>+ __attribute__((unused)) void *data)
>+{
>+ /* Stop traffic and Close port. */
>+ rte_rawdev_stop(dev_id);
>+ rte_rawdev_close(dev_id);
>+
>+ cmdline_quit(cl);
>+}
>+
>+cmdline_parse_token_string_t cmd_quit_quit =
>+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
>+
>+cmdline_parse_inst_t cmd_quit = {
>+ .f = cmd_quit_parsed,
>+ .data = NULL,
>+ .help_str = "exit application",
>+ .tokens = {
>+ (void *)&cmd_quit_quit,
>+ NULL,
>+ },
>+};
>+
>+/* *** SEND FILE PARAMETERS *** */
>+struct cmd_sendfile_result {
>+ cmdline_fixed_string_t send_string;
>+ char filepath[];
>+};
>+
>+static void
>+cmd_sendfile_parsed(void *parsed_result,
>+ __attribute__((unused)) struct cmdline *cl,
>+ __attribute__((unused)) void *data)
>+{
>+ struct cmd_sendfile_result *res = parsed_result;
>+ struct rte_rawdev_buf *pkts_send[1];
>+ uint64_t rsize, size, link;
>+ char *filepath;
>+ uint8_t *buff;
>+ uint32_t val;
>+ FILE *file;
>+
>+ if (!rte_rawdevs[dev_id].started)
>+ printf("Device needs to be up first. Try later.\n");
I think we can directly return here when the device is not started, instead of
continuing the execution.
>+
>+ rte_rawdev_get_attr(dev_id, "link_status", &link);
>+ if (!link)
>+ printf("Link is not up, cannot send file.\n");
return if link is down.
>+
>+ filepath = strdup(res->filepath);
>+ if (filepath == NULL) {
>+ printf("Fail to get filepath.\n");
>+ return;
>+ }
>+
>+ file = fopen(filepath, "r");
Actually I was thinking why we need the filepath, why not just
file = fopen(res->filepath, "r")
Then we don't need to handle filepath free at all.
>+ if (!file) {
style 1.8.1
>+ printf("Fail to open the file.\n");
Need to free filepath in this error handling.
>+ return;
>+ }
>+
>+ fseek(file, 0, SEEK_END);
>+ size = ftell(file);
>+ fseek(file, 0, SEEK_SET);
>+
>+ /**
>+ * No FIFO now. Only test memory. Limit sending file
>+ * size <= max_file_size.
>+ */
>+ if (size > max_file_size)
>+ size = max_file_size;
It's better to give the user some reminder info about the max size limition,
rather than truncate the file silently.
>+
>+ buff = (uint8_t *)malloc(size);
>+ rsize = fread(buff, size, 1, file);
>+ if (rsize != 1) {
>+ printf("Fail to read file.\n");
>+ fclose(file);
Need to free filepath and buff.
>+ return;
>+ }
>+
>+ /* Tell remote about the file size. */
>+ val = size >> 32;
>+ rte_rawdev_set_attr(dev_id, "spad14", val);
>+ val = size;
>+ rte_rawdev_set_attr(dev_id, "spad15", val);
>+
>+ pkts_send[0] = (struct rte_rawdev_buf *)malloc
>+ (sizeof(struct rte_rawdev_buf));
>+ pkts_send[0]->buf_addr = buff;
>+ rte_rawdev_enqueue_buffers(dev_id, pkts_send, 1, (void *)size);
May need to check the return value.
>+ printf("Done sending file.\n");
>+
>+ fclose(file);
>+ free((void *)filepath);
Need to free allocated pkts_send[0] and buff.
>+}
>+
>+cmdline_parse_token_string_t cmd_send_file_send =
>+ TOKEN_STRING_INITIALIZER(struct cmd_sendfile_result, send_string,
>+ "send");
>+cmdline_parse_token_string_t cmd_send_file_filepath =
>+ TOKEN_STRING_INITIALIZER(struct cmd_sendfile_result, filepath, NULL);
>+
>+
>+cmdline_parse_inst_t cmd_send_file = {
>+ .f = cmd_sendfile_parsed,
>+ .data = NULL,
>+ .help_str = "send <file_path>",
>+ .tokens = {
>+ (void *)&cmd_send_file_send,
>+ (void *)&cmd_send_file_filepath,
>+ NULL,
>+ },
>+};
>+
>+/* *** RECEIVE FILE PARAMETERS *** */
>+struct cmd_recvfile_result {
>+ cmdline_fixed_string_t recv_string;
>+ char filepath[];
>+};
>+
>+static void
>+cmd_recvfile_parsed(void *parsed_result,
>+ __attribute__((unused)) struct cmdline *cl,
>+ __attribute__((unused)) void *data)
>+{
>+ struct cmd_sendfile_result *res = parsed_result;
>+ struct rte_rawdev_buf *pkts_recv[1];
>+ uint64_t size, val;
>+ char *filepath;
>+ uint8_t *buff;
>+ FILE *file;
>+
>+ if (!rte_rawdevs[dev_id].started)
>+ printf("Device needs to be up first. Try later.\n");
return directly.
>+
>+ rte_rawdev_get_attr(dev_id, "link_status", &val);
>+ if (!val)
>+ printf("Link is not up, cannot receive file.\n");
return directly.
>+
>+ filepath = strdup(res->filepath);
>+ if (filepath == NULL) {
>+ printf("Fail to get filepath.\n");
>+ return;
>+ }
>+
>+ file = fopen(filepath, "w");
>+ if (!file) {
style 1.8.1
>+ printf("Fail to open the file.\n");
>+ return;
>+ }
>+
>+ rte_rawdev_get_attr(dev_id, "spad14", &val);
>+ size = val << 32;
>+ rte_rawdev_get_attr(dev_id, "spad15", &val);
>+ size |= val;
>+
>+ buff = (uint8_t *)malloc(size);
>+ pkts_recv[0] = (struct rte_rawdev_buf *)malloc
>+ (sizeof(struct rte_rawdev_buf));
>+ pkts_recv[0]->buf_addr = buff;
>+
>+ rte_rawdev_dequeue_buffers(dev_id, pkts_recv, 1, (void *)size);
>+
>+ fwrite(buff, size, 1, file);
>+ printf("Done receiving to file.\n");
>+
>+ fclose(file);
>+ free((void *)filepath);
free buff and pkts_recv[0] as well.
I noticed that there are two allocations, one for pkts_recv[0] and another for
pkts_recv[0]->buf_addr, How about we declare
struct rte_rawdev_buf pkts_recv[1];
and allocate memory for its buf_addr
pkts_recv[0].buf_addr = malloc(size);
then we call
rte_rawdev_dequeue_buffers(dev_id, &pkts_recv, 1, (void *)size);
After that, we just need to free once.
free(pkts_recv[0].buf_addr);
>+}
>+
>+cmdline_parse_token_string_t cmd_recv_file_recv =
>+ TOKEN_STRING_INITIALIZER(struct cmd_recvfile_result, recv_string,
>+ "recv");
>+cmdline_parse_token_string_t cmd_recv_file_filepath =
>+ TOKEN_STRING_INITIALIZER(struct cmd_recvfile_result, filepath, NULL);
>+
>+
>+cmdline_parse_inst_t cmd_recv_file = {
>+ .f = cmd_recvfile_parsed,
>+ .data = NULL,
>+ .help_str = "recv <file_path>",
>+ .tokens = {
>+ (void *)&cmd_recv_file_recv,
>+ (void *)&cmd_recv_file_filepath,
>+ NULL,
>+ },
>+};
>+
>+/* list of instructions */
>+cmdline_parse_ctx_t main_ctx[] = {
>+ (cmdline_parse_inst_t *)&cmd_help,
>+ (cmdline_parse_inst_t *)&cmd_send_file,
>+ (cmdline_parse_inst_t *)&cmd_recv_file,
>+ (cmdline_parse_inst_t *)&cmd_quit,
>+ NULL,
>+};
>+
>+/* prompt function, called from main on MASTER lcore */
>+static void
>+prompt(void)
>+{
>+ struct cmdline *cl;
>+
>+ cl = cmdline_stdin_new(main_ctx, "ntb> ");
>+ if (cl == NULL)
>+ return;
>+
>+ cmdline_interact(cl);
>+ cmdline_stdin_exit(cl);
>+}
>+
>+static void
>+signal_handler(int signum)
>+{
>+ if (signum == SIGINT || signum == SIGTERM) {
>+ printf("\nSignal %d received, preparing to exit...\n", signum);
>+ signal(signum, SIG_DFL);
>+ kill(getpid(), signum);
>+ }
>+}
>+
>+static void
>+ntb_usage(const char *prgname)
>+{
>+ printf("%s [EAL options] -- [options]\n"
>+ "-i : run in interactive mode (default value is 1)\n",
>+ prgname);
>+}
>+
>+static int
>+parse_args(int argc, char **argv)
>+{
>+ char *prgname = argv[0], **argvopt = argv;
>+ int opt, ret;
>+
>+ /* Only support interactive mode to send/recv file first. */
>+ while ((opt = getopt(argc, argvopt, "i")) != EOF) {
>+ switch (opt) {
>+ case 'i':
>+ printf("Interactive-mode selected\n");
>+ interactive = 1;
>+ break;
>+
>+ default:
>+ ntb_usage(prgname);
>+ return -1;
>+ }
>+ }
>+
>+ if (optind >= 0)
>+ argv[optind-1] = prgname;
>+
>+ ret = optind-1;
>+ optind = 1; /* reset getopt lib */
>+ return ret;
>+}
>+
>+int
>+main(int argc, char **argv)
>+{
>+ int ret, i;
>+
>+ signal(SIGINT, signal_handler);
>+ signal(SIGTERM, signal_handler);
>+
>+ ret = rte_eal_init(argc, argv);
>+ if (ret < 0)
>+ rte_exit(EXIT_FAILURE, "Error with EAL initialization.\n");
>+
>+ /* Find 1st ntb rawdev. */
>+ for (i = 0; i < RTE_RAWDEV_MAX_DEVS; i++)
>+ if (rte_rawdevs[i].driver_name &&
>+ (strncmp(rte_rawdevs[i].driver_name, "raw_ntb", 7) == 0) &&
Use Macro for the 7.
>+ (rte_rawdevs[i].attached == 1))
>+ break;
>+
>+ if (i == RTE_RAWDEV_MAX_DEVS)
>+ rte_exit(EXIT_FAILURE, "Cannot find any ntb device.\n");
>+
>+ dev_id = i;
>+
>+ argc -= ret;
>+ argv += ret;
>+
>+ ret = parse_args(argc, argv);
>+ if (ret < 0)
>+ rte_exit(EXIT_FAILURE, "Invalid arguments\n");
>+
>+ rte_rawdev_start(dev_id);
>+
>+ if (interactive) {
>+ sleep(1);
>+ prompt();
>+ }
>+
>+ return 0;
>+}
>--
>2.17.1
>
next prev parent reply other threads:[~2019-06-04 6:56 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 8:46 [dpdk-dev] [PATCH 0/6] rawdev driver " Xiaoyun Li
2019-06-03 8:46 ` [dpdk-dev] [PATCH 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-04 2:20 ` Ye Xiaolong
2019-06-03 8:46 ` [dpdk-dev] [PATCH 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-04 3:01 ` Ye Xiaolong
2019-06-03 8:46 ` [dpdk-dev] [PATCH 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-03 8:46 ` [dpdk-dev] [PATCH 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-04 6:48 ` Ye Xiaolong [this message]
2019-06-04 8:12 ` Li, Xiaoyun
2019-06-05 8:32 ` Li, Xiaoyun
2019-06-05 9:25 ` Ye Xiaolong
2019-06-05 13:36 ` Li, Xiaoyun
2019-06-06 2:07 ` Ye Xiaolong
2019-06-04 8:48 ` Ye Xiaolong
2019-06-05 3:11 ` Li, Xiaoyun
2019-06-03 8:46 ` [dpdk-dev] [PATCH 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-04 7:53 ` Jerin Jacob Kollanukkaran
2019-06-04 8:16 ` Li, Xiaoyun
2019-06-03 8:46 ` [dpdk-dev] [PATCH 6/6] doc: update docs for ntb pmd Xiaoyun Li
2019-06-06 7:42 ` [dpdk-dev] [PATCH v2 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-06 7:42 ` [dpdk-dev] [PATCH v2 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-06 7:42 ` [dpdk-dev] [PATCH v2 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-06 7:43 ` [dpdk-dev] [PATCH v2 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-06 7:43 ` [dpdk-dev] [PATCH v2 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-06 7:43 ` [dpdk-dev] [PATCH v2 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-06 8:23 ` Bruce Richardson
2019-06-10 1:38 ` Li, Xiaoyun
2019-06-06 7:43 ` [dpdk-dev] [PATCH v2 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-11 8:22 ` [dpdk-dev] [PATCH 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-11 8:50 ` [dpdk-dev] [PATCH v3 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-13 7:56 ` [dpdk-dev] [PATCH v4 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-17 12:49 ` Wang, Xiao W
2019-06-18 1:28 ` Li, Xiaoyun
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-14 2:19 ` [dpdk-dev] [PATCH v5 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-18 16:07 ` Wu, Jingjing
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-18 16:07 ` Wu, Jingjing
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-18 16:07 ` Wu, Jingjing
2019-06-20 10:06 ` Li, Xiaoyun
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-18 2:10 ` [dpdk-dev] [PATCH v6 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-20 10:21 ` [dpdk-dev] [PATCH v7 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-27 16:31 ` Wu, Jingjing
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-27 17:06 ` Wu, Jingjing
2019-06-28 1:33 ` Li, Xiaoyun
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-27 17:19 ` Wu, Jingjing
2019-06-28 1:33 ` Li, Xiaoyun
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-27 17:30 ` Wu, Jingjing
2019-06-28 1:36 ` Li, Xiaoyun
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-27 17:34 ` Wu, Jingjing
2019-06-26 7:12 ` [dpdk-dev] [PATCH v8 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-06-27 17:33 ` Wu, Jingjing
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 0/6] rawdev driver for ntb Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 1/6] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 2/6] raw/ntb: add intel ntb support Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 3/6] raw/ntb: add handshake process Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 4/6] examples/ntb: enable an example for ntb Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 5/6] usertools/dpdk-devbind.py: add support " Xiaoyun Li
2019-06-28 2:53 ` [dpdk-dev] [PATCH v9 6/6] doc: update docs for ntb driver Xiaoyun Li
2019-07-01 14:24 ` Thomas Monjalon
2019-07-02 1:18 ` Li, Xiaoyun
2019-06-28 10:17 ` [dpdk-dev] [PATCH v9 0/6] rawdev driver for ntb Wu, Jingjing
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 0/5] " Xiaoyun Li
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 1/5] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 2/5] usertools/dpdk-devbind.py: add support for ntb Xiaoyun Li
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 3/5] raw/ntb: add intel ntb support Xiaoyun Li
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 4/5] raw/ntb: add handshake process Xiaoyun Li
2019-07-02 6:17 ` [dpdk-dev] [PATCH v10 5/5] examples/ntb: enable an example for ntb Xiaoyun Li
2019-07-02 6:23 ` [dpdk-dev] [PATCH v10 1/5] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 0/5] rawdev driver for ntb Xiaoyun Li
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 1/5] raw/ntb: introduce ntb rawdev driver Xiaoyun Li
2019-07-04 10:31 ` Thomas Monjalon
2019-07-04 10:37 ` Bruce Richardson
2019-07-05 1:21 ` Li, Xiaoyun
2019-07-05 1:28 ` Li, Xiaoyun
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 2/5] usertools/dpdk-devbind.py: add support for ntb Xiaoyun Li
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 3/5] raw/ntb: add intel ntb support Xiaoyun Li
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 4/5] raw/ntb: add handshake process Xiaoyun Li
2019-07-02 6:25 ` [dpdk-dev] [PATCH v10 5/5] examples/ntb: enable an example for ntb Xiaoyun Li
2019-07-02 14:10 ` [dpdk-dev] [PATCH v10 0/5] rawdev driver " Ye Xiaolong
2019-07-04 12:29 ` [dpdk-dev] [PATCH v11 0/4] " Thomas Monjalon
2019-07-04 12:29 ` [dpdk-dev] [PATCH v11 1/4] raw/ntb: introduce NTB raw device driver Thomas Monjalon
2019-07-04 12:29 ` [dpdk-dev] [PATCH v11 2/4] raw/ntb: support Intel NTB Thomas Monjalon
2019-07-04 12:29 ` [dpdk-dev] [PATCH v11 3/4] raw/ntb: add handshake process Thomas Monjalon
2019-07-04 12:29 ` [dpdk-dev] [PATCH v11 4/4] examples/ntb: add example for NTB Thomas Monjalon
2019-07-05 2:41 ` [dpdk-dev] [PATCH v11 0/4] rawdev driver for ntb Li, Xiaoyun
2019-07-05 10:52 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190604064801.GA94383@intel.com \
--to=xiaolong.ye@intel.com \
--cc=cunming.liang@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=keith.wiles@intel.com \
--cc=omkar.maslekar@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).