From: Ye Xiaolong <xiaolong.ye@intel.com>
To: Xiao Zhang <xiao.zhang@intel.com>
Cc: dev@dpdk.org, beilei.xing@intel.com, stable@dpdk.org
Subject: Re: [dpdk-stable] [dpdk-dev] [v5] net/i40e: fix vf runtime queues rss config
Date: Tue, 13 Aug 2019 14:28:15 +0800 [thread overview]
Message-ID: <20190813062815.GA10508@intel.com> (raw)
In-Reply-To: <1565692851-36962-1-git-send-email-xiao.zhang@intel.com>
Hi, Xiao
On 08/13, Xiao Zhang wrote:
>I40evf queue can not work properly with kernel pf driver. Eg. when
>configure 8 queues pair, only 4 queues can receive packets, and half
>packets will be lost if using 2 queues pair.
>This issue is caused by misconfiguration of look up table, use aq
>command to setup the lut to make it work properly.
So the original code of lookup table configuration is problematic? Can we just
remove them?
Thanks,
Xiaolong
>
>Fixes: cea7a51c1750 ("i40evf: support RSS")
>Cc: stable@dpdk.org
>
>Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
>---
>v5 fix compile issue
>v4 move local variable definition to the begin of the function
>v3 move LUT configuration in to i40evf_configure_rss
>v2 change for loop format to avoid build patch issue
>---
> drivers/net/i40e/i40e_ethdev_vf.c | 32 ++++++++++++++++++++++++++------
> 1 file changed, 26 insertions(+), 6 deletions(-)
>
>diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
>index 308fb98..c77b30c 100644
>--- a/drivers/net/i40e/i40e_ethdev_vf.c
>+++ b/drivers/net/i40e/i40e_ethdev_vf.c
>@@ -2598,7 +2598,10 @@ i40evf_config_rss(struct i40e_vf *vf)
> struct i40e_hw *hw = I40E_VF_TO_HW(vf);
> struct rte_eth_rss_conf rss_conf;
> uint32_t i, j, lut = 0, nb_q = (I40E_VFQF_HLUT_MAX_INDEX + 1) * 4;
>+ uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) * 4;
> uint16_t num;
>+ uint8_t *lut_info;
>+ int ret;
>
> if (vf->dev_data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> i40evf_disable_rss(vf);
>@@ -2608,12 +2611,29 @@ i40evf_config_rss(struct i40e_vf *vf)
>
> num = RTE_MIN(vf->dev_data->nb_rx_queues, I40E_MAX_QP_NUM_PER_VF);
> /* Fill out the look up table */
>- for (i = 0, j = 0; i < nb_q; i++, j++) {
>- if (j >= num)
>- j = 0;
>- lut = (lut << 8) | j;
>- if ((i & 3) == 3)
>- I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
>+ if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) {
>+ for (i = 0, j = 0; i < nb_q; i++, j++) {
>+ if (j >= num)
>+ j = 0;
>+ lut = (lut << 8) | j;
>+ if ((i & 3) == 3)
>+ I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
>+ }
>+ } else {
>+ lut_info = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0);
>+ if (!lut_info) {
>+ PMD_DRV_LOG(ERR, "No memory can be allocated");
>+ return -ENOMEM;
>+ }
>+
>+ for (i = 0; i < rss_lut_size; i++)
>+ lut_info[i] = i % vf->num_queue_pairs;
>+
>+ ret = i40evf_set_rss_lut(&vf->vsi, lut_info,
>+ rss_lut_size);
>+ rte_free(lut_info);
>+ if (ret)
>+ return ret;
> }
>
> rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf;
>--
>2.7.4
>
next prev parent reply other threads:[~2019-08-13 6:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-07 0:09 [dpdk-stable] " Xiao Zhang
2019-08-08 16:41 ` [dpdk-stable] [v2] " Xiao Zhang
2019-08-09 2:44 ` Xing, Beilei
2019-08-09 3:25 ` Zhang, Xiao
2019-08-12 10:29 ` [dpdk-stable] [v3] " Xiao Zhang
2019-08-12 17:43 ` [dpdk-stable] [v4] " Xiao Zhang
2019-08-12 12:07 ` [dpdk-stable] [dpdk-dev] " Aaron Conole
2019-08-13 1:43 ` [dpdk-stable] " Xing, Beilei
2019-08-13 10:40 ` [dpdk-stable] [v5] " Xiao Zhang
2019-08-13 2:21 ` Xing, Beilei
2019-08-13 6:28 ` Ye Xiaolong [this message]
2019-08-13 7:24 ` [dpdk-stable] [dpdk-dev] " Zhang, Xiao
2019-08-13 7:37 ` Ye Xiaolong
2019-08-13 7:59 ` Zhang, Xiao
2019-08-13 22:17 ` [dpdk-stable] [v6] " Xiao Zhang
2019-08-13 14:55 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190813062815.GA10508@intel.com \
--to=xiaolong.ye@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=xiao.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).