From: Qi Zhang <qi.z.zhang@intel.com>
To: wenzhuo.lu@intel.com, qiming.yang@intel.com
Cc: dev@dpdk.org, xiaolong.ye@intel.com,
Qi Zhang <qi.z.zhang@intel.com>,
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Subject: [dpdk-dev] [PATCH v2 08/63] net/ice/base: remove debug code
Date: Thu, 29 Aug 2019 10:36:01 +0800 [thread overview]
Message-ID: <20190829023656.8220-9-qi.z.zhang@intel.com> (raw)
In-Reply-To: <20190829023656.8220-1-qi.z.zhang@intel.com>
Remove firmware logging debug code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 88 --------------
drivers/net/ice/base/ice_common.c | 223 ----------------------------------
drivers/net/ice/base/ice_common.h | 1 -
drivers/net/ice/base/ice_type.h | 20 ---
4 files changed, 332 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index b5faa5bf6..9e5853cca 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -2176,87 +2176,6 @@ struct ice_aqc_event_lan_overflow {
-/* Configure Firmware Logging Command (indirect 0xFF09)
- * Logging Information Read Response (indirect 0xFF10)
- * Note: The 0xFF10 command has no input parameters.
- */
-struct ice_aqc_fw_logging {
- u8 log_ctrl;
-#define ICE_AQC_FW_LOG_AQ_EN BIT(0)
-#define ICE_AQC_FW_LOG_UART_EN BIT(1)
- u8 rsvd0;
- u8 log_ctrl_valid; /* Not used by 0xFF10 Response */
-#define ICE_AQC_FW_LOG_AQ_VALID BIT(0)
-#define ICE_AQC_FW_LOG_UART_VALID BIT(1)
- u8 rsvd1[5];
- __le32 addr_high;
- __le32 addr_low;
-};
-
-
-enum ice_aqc_fw_logging_mod {
- ICE_AQC_FW_LOG_ID_GENERAL = 0,
- ICE_AQC_FW_LOG_ID_CTRL,
- ICE_AQC_FW_LOG_ID_LINK,
- ICE_AQC_FW_LOG_ID_LINK_TOPO,
- ICE_AQC_FW_LOG_ID_DNL,
- ICE_AQC_FW_LOG_ID_I2C,
- ICE_AQC_FW_LOG_ID_SDP,
- ICE_AQC_FW_LOG_ID_MDIO,
- ICE_AQC_FW_LOG_ID_ADMINQ,
- ICE_AQC_FW_LOG_ID_HDMA,
- ICE_AQC_FW_LOG_ID_LLDP,
- ICE_AQC_FW_LOG_ID_DCBX,
- ICE_AQC_FW_LOG_ID_DCB,
- ICE_AQC_FW_LOG_ID_NETPROXY,
- ICE_AQC_FW_LOG_ID_NVM,
- ICE_AQC_FW_LOG_ID_AUTH,
- ICE_AQC_FW_LOG_ID_VPD,
- ICE_AQC_FW_LOG_ID_IOSF,
- ICE_AQC_FW_LOG_ID_PARSER,
- ICE_AQC_FW_LOG_ID_SW,
- ICE_AQC_FW_LOG_ID_SCHEDULER,
- ICE_AQC_FW_LOG_ID_TXQ,
- ICE_AQC_FW_LOG_ID_RSVD,
- ICE_AQC_FW_LOG_ID_POST,
- ICE_AQC_FW_LOG_ID_WATCHDOG,
- ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
- ICE_AQC_FW_LOG_ID_MNG,
- ICE_AQC_FW_LOG_ID_SYNCE,
- ICE_AQC_FW_LOG_ID_MAX,
-};
-
-/* This is the buffer for both of the logging commands.
- * The entry array size depends on the datalen parameter in the descriptor.
- * There will be a total of datalen / 2 entries.
- */
-struct ice_aqc_fw_logging_data {
- __le16 entry[1];
-#define ICE_AQC_FW_LOG_ID_S 0
-#define ICE_AQC_FW_LOG_ID_M (0xFFF << ICE_AQC_FW_LOG_ID_S)
-
-#define ICE_AQC_FW_LOG_CONF_SUCCESS 0 /* Used by response */
-#define ICE_AQC_FW_LOG_CONF_BAD_INDX BIT(12) /* Used by response */
-
-#define ICE_AQC_FW_LOG_EN_S 12
-#define ICE_AQC_FW_LOG_EN_M (0xF << ICE_AQC_FW_LOG_EN_S)
-#define ICE_AQC_FW_LOG_INFO_EN BIT(12) /* Used by command */
-#define ICE_AQC_FW_LOG_INIT_EN BIT(13) /* Used by command */
-#define ICE_AQC_FW_LOG_FLOW_EN BIT(14) /* Used by command */
-#define ICE_AQC_FW_LOG_ERR_EN BIT(15) /* Used by command */
-};
-
-
-/* Get/Clear FW Log (indirect 0xFF11) */
-struct ice_aqc_get_clear_fw_log {
- u8 flags;
-#define ICE_AQC_FW_LOG_CLEAR BIT(0)
-#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL BIT(1)
- u8 rsvd1[7];
- __le32 addr_high;
- __le32 addr_low;
-};
-
/**
* struct ice_aq_desc - Admin Queue (AQ) descriptor
@@ -2337,8 +2256,6 @@ struct ice_aq_desc {
struct ice_aqc_get_vsi_resp get_vsi_resp;
struct ice_aqc_download_pkg download_pkg;
struct ice_aqc_get_pkg_info_list get_pkg_info_list;
- struct ice_aqc_fw_logging fw_logging;
- struct ice_aqc_get_clear_fw_log get_clear_fw_log;
struct ice_aqc_set_mac_lb set_mac_lb;
struct ice_aqc_alloc_free_res_cmd sw_res_ctrl;
struct ice_aqc_get_res_alloc get_res;
@@ -2558,11 +2475,6 @@ enum ice_adminq_opc {
/* Standalone Commands/Events */
ice_aqc_opc_event_lan_overflow = 0x1001,
-
- /* debug commands */
- ice_aqc_opc_fw_logging = 0xFF09,
- ice_aqc_opc_fw_logging_info = 0xFF10,
- ice_aqc_opc_get_clear_fw_log = 0xFF11
};
#endif /* _ICE_ADMINQ_CMD_H_ */
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index b4f0b964d..43c06948f 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -653,223 +653,6 @@ static void ice_cleanup_fltr_mgmt_struct(struct ice_hw *hw)
ice_free(hw, sw);
}
-#define ICE_FW_LOG_DESC_SIZE(n) (sizeof(struct ice_aqc_fw_logging_data) + \
- (((n) - 1) * sizeof(((struct ice_aqc_fw_logging_data *)0)->entry)))
-#define ICE_FW_LOG_DESC_SIZE_MAX \
- ICE_FW_LOG_DESC_SIZE(ICE_AQC_FW_LOG_ID_MAX)
-
-/**
- * ice_get_fw_log_cfg - get FW logging configuration
- * @hw: pointer to the HW struct
- */
-static enum ice_status ice_get_fw_log_cfg(struct ice_hw *hw)
-{
- struct ice_aqc_fw_logging_data *config;
- struct ice_aq_desc desc;
- enum ice_status status;
- u16 size;
-
- size = ICE_FW_LOG_DESC_SIZE_MAX;
- config = (struct ice_aqc_fw_logging_data *)ice_malloc(hw, size);
- if (!config)
- return ICE_ERR_NO_MEMORY;
-
- ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info);
-
- desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_BUF);
- desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
-
- status = ice_aq_send_cmd(hw, &desc, config, size, NULL);
- if (!status) {
- u16 i;
-
- /* Save fw logging information into the HW structure */
- for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
- u16 v, m, flgs;
-
- v = LE16_TO_CPU(config->entry[i]);
- m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
- flgs = (v & ICE_AQC_FW_LOG_EN_M) >> ICE_AQC_FW_LOG_EN_S;
-
- if (m < ICE_AQC_FW_LOG_ID_MAX)
- hw->fw_log.evnts[m].cur = flgs;
- }
- }
-
- ice_free(hw, config);
-
- return status;
-}
-
-/**
- * ice_cfg_fw_log - configure FW logging
- * @hw: pointer to the HW struct
- * @enable: enable certain FW logging events if true, disable all if false
- *
- * This function enables/disables the FW logging via Rx CQ events and a UART
- * port based on predetermined configurations. FW logging via the Rx CQ can be
- * enabled/disabled for individual PF's. However, FW logging via the UART can
- * only be enabled/disabled for all PFs on the same device.
- *
- * To enable overall FW logging, the "cq_en" and "uart_en" enable bits in
- * hw->fw_log need to be set accordingly, e.g. based on user-provided input,
- * before initializing the device.
- *
- * When re/configuring FW logging, callers need to update the "cfg" elements of
- * the hw->fw_log.evnts array with the desired logging event configurations for
- * modules of interest. When disabling FW logging completely, the callers can
- * just pass false in the "enable" parameter. On completion, the function will
- * update the "cur" element of the hw->fw_log.evnts array with the resulting
- * logging event configurations of the modules that are being re/configured. FW
- * logging modules that are not part of a reconfiguration operation retain their
- * previous states.
- *
- * Before resetting the device, it is recommended that the driver disables FW
- * logging before shutting down the control queue. When disabling FW logging
- * ("enable" = false), the latest configurations of FW logging events stored in
- * hw->fw_log.evnts[] are not overridden to allow them to be reconfigured after
- * a device reset.
- *
- * When enabling FW logging to emit log messages via the Rx CQ during the
- * device's initialization phase, a mechanism alternative to interrupt handlers
- * needs to be used to extract FW log messages from the Rx CQ periodically and
- * to prevent the Rx CQ from being full and stalling other types of control
- * messages from FW to SW. Interrupts are typically disabled during the device's
- * initialization phase.
- */
-static enum ice_status ice_cfg_fw_log(struct ice_hw *hw, bool enable)
-{
- struct ice_aqc_fw_logging_data *data = NULL;
- struct ice_aqc_fw_logging *cmd;
- enum ice_status status = ICE_SUCCESS;
- u16 i, chgs = 0, len = 0;
- struct ice_aq_desc desc;
- u8 actv_evnts = 0;
- void *buf = NULL;
-
- if (!hw->fw_log.cq_en && !hw->fw_log.uart_en)
- return ICE_SUCCESS;
-
- /* Disable FW logging only when the control queue is still responsive */
- if (!enable &&
- (!hw->fw_log.actv_evnts || !ice_check_sq_alive(hw, &hw->adminq)))
- return ICE_SUCCESS;
-
- /* Get current FW log settings */
- status = ice_get_fw_log_cfg(hw);
- if (status)
- return status;
-
- ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging);
- cmd = &desc.params.fw_logging;
-
- /* Indicate which controls are valid */
- if (hw->fw_log.cq_en)
- cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_AQ_VALID;
-
- if (hw->fw_log.uart_en)
- cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_UART_VALID;
-
- if (enable) {
- /* Fill in an array of entries with FW logging modules and
- * logging events being reconfigured.
- */
- for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
- u16 val;
-
- /* Keep track of enabled event types */
- actv_evnts |= hw->fw_log.evnts[i].cfg;
-
- if (hw->fw_log.evnts[i].cfg == hw->fw_log.evnts[i].cur)
- continue;
-
- if (!data) {
- data = (struct ice_aqc_fw_logging_data *)
- ice_malloc(hw,
- ICE_FW_LOG_DESC_SIZE_MAX);
- if (!data)
- return ICE_ERR_NO_MEMORY;
- }
-
- val = i << ICE_AQC_FW_LOG_ID_S;
- val |= hw->fw_log.evnts[i].cfg << ICE_AQC_FW_LOG_EN_S;
- data->entry[chgs++] = CPU_TO_LE16(val);
- }
-
- /* Only enable FW logging if at least one module is specified.
- * If FW logging is currently enabled but all modules are not
- * enabled to emit log messages, disable FW logging altogether.
- */
- if (actv_evnts) {
- /* Leave if there is effectively no change */
- if (!chgs)
- goto out;
-
- if (hw->fw_log.cq_en)
- cmd->log_ctrl |= ICE_AQC_FW_LOG_AQ_EN;
-
- if (hw->fw_log.uart_en)
- cmd->log_ctrl |= ICE_AQC_FW_LOG_UART_EN;
-
- buf = data;
- len = ICE_FW_LOG_DESC_SIZE(chgs);
- desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
- }
- }
-
- status = ice_aq_send_cmd(hw, &desc, buf, len, NULL);
- if (!status) {
- /* Update the current configuration to reflect events enabled.
- * hw->fw_log.cq_en and hw->fw_log.uart_en indicate if the FW
- * logging mode is enabled for the device. They do not reflect
- * actual modules being enabled to emit log messages. So, their
- * values remain unchanged even when all modules are disabled.
- */
- u16 cnt = enable ? chgs : (u16)ICE_AQC_FW_LOG_ID_MAX;
-
- hw->fw_log.actv_evnts = actv_evnts;
- for (i = 0; i < cnt; i++) {
- u16 v, m;
-
- if (!enable) {
- /* When disabling all FW logging events as part
- * of device's de-initialization, the original
- * configurations are retained, and can be used
- * to reconfigure FW logging later if the device
- * is re-initialized.
- */
- hw->fw_log.evnts[i].cur = 0;
- continue;
- }
-
- v = LE16_TO_CPU(data->entry[i]);
- m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
- hw->fw_log.evnts[m].cur = hw->fw_log.evnts[m].cfg;
- }
- }
-
-out:
- if (data)
- ice_free(hw, data);
-
- return status;
-}
-
-/**
- * ice_output_fw_log
- * @hw: pointer to the HW struct
- * @desc: pointer to the AQ message descriptor
- * @buf: pointer to the buffer accompanying the AQ message
- *
- * Formats a FW Log message and outputs it via the standard driver logs.
- */
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf)
-{
- ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg Start ]\n");
- ice_debug_array(hw, ICE_DBG_FW_LOG, 16, 1, (u8 *)buf,
- LE16_TO_CPU(desc->datalen));
- ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg End ]\n");
-}
/**
* ice_get_itr_intrl_gran - determine int/intrl granularity
@@ -979,10 +762,6 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
if (ice_get_fw_mode(hw) == ICE_FW_MODE_ROLLBACK)
ice_print_rollback_msg(hw);
- /* Enable FW logging. Not fatal if this fails. */
- status = ice_cfg_fw_log(hw, true);
- if (status)
- ice_debug(hw, ICE_DBG_INIT, "Failed to enable FW logging.\n");
status = ice_clear_pf_cfg(hw);
if (status)
@@ -1136,8 +915,6 @@ void ice_deinit_hw(struct ice_hw *hw)
hw->port_info = NULL;
}
- /* Attempt to disable FW logging before shutting down control queues */
- ice_cfg_fw_log(hw, false);
ice_destroy_all_ctrlq(hw);
/* Clear VSI contexts if not already cleared */
diff --git a/drivers/net/ice/base/ice_common.h b/drivers/net/ice/base/ice_common.h
index 4ecfa6b9b..4e44c2f13 100644
--- a/drivers/net/ice/base/ice_common.h
+++ b/drivers/net/ice/base/ice_common.h
@@ -194,7 +194,6 @@ enum ice_status
ice_cfg_tc_node_bw_alloc(struct ice_port_info *pi, u8 tc,
enum ice_rl_type rl_type, u8 bw_alloc);
enum ice_status ice_cfg_rl_burst_size(struct ice_hw *hw, u32 bytes);
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf);
void
ice_stat_update40(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
u64 *prev_stat, u64 *cur_stat);
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index d8cb8eecd..7194cb9ec 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -690,25 +690,6 @@ struct ice_switch_info {
struct ice_sw_recipe *recp_list;
};
-/* FW logging configuration */
-struct ice_fw_log_evnt {
- u8 cfg : 4; /* New event enables to configure */
- u8 cur : 4; /* Current/active event enables */
-};
-
-struct ice_fw_log_cfg {
- u8 cq_en : 1; /* FW logging is enabled via the control queue */
- u8 uart_en : 1; /* FW logging is enabled via UART for all PFs */
- u8 actv_evnts; /* Cumulation of currently enabled log events */
-
-#define ICE_FW_LOG_EVNT_INFO (ICE_AQC_FW_LOG_INFO_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_INIT (ICE_AQC_FW_LOG_INIT_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_FLOW (ICE_AQC_FW_LOG_FLOW_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_ERR (ICE_AQC_FW_LOG_ERR_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_ALL (ICE_FW_LOG_EVNT_INFO | ICE_FW_LOG_EVNT_INIT | \
- ICE_FW_LOG_EVNT_FLOW | ICE_FW_LOG_EVNT_ERR)
- struct ice_fw_log_evnt evnts[ICE_AQC_FW_LOG_ID_MAX];
-};
/* Port hardware description */
struct ice_hw {
@@ -767,7 +748,6 @@ struct ice_hw {
u8 fw_patch; /* firmware patch version */
u32 fw_build; /* firmware build number */
- struct ice_fw_log_cfg fw_log;
/* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL
* register. Used for determining the itr/intrl granularity during
--
2.13.6
next prev parent reply other threads:[~2019-08-29 2:35 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 10:50 [dpdk-dev] [PATCH 00/63] net/ice/base: update base code Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 01/63] net/ice/base: enhance NVM read Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 02/63] net/ice/base: add function to get FW mode Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 03/63] net/ice/base: add support for NVM rollback detection Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 04/63] net/ice/base: add support to init RXDID descs fields Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 05/63] net/ice/base: store number of functions for the device Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 06/63] net/ice/base: add read PBA module function Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 07/63] net/ice/base: correct argument port info Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 08/63] net/ice/base: remove debug code Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 09/63] net/ice/base: add SFF EEPROM AQ Command Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 10/63] net/ice/base: improve debug print message Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 11/63] net/ice/base: add capabilities when in safe mode Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 12/63] net/ice/base: add helper functions for PHY caching Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 13/63] net/ice/base: add support for reading REPC statistics Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 14/63] net/ice/base: adjust DCB INIT for SW mode Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 15/63] net/ice/base: add NVM pkg flag Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 16/63] net/ice/base: move VSI to VSI group Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 17/63] net/ice/base: enable masking for RSS and FD field vectors Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 18/63] net/ice/base: resolve static analysis issues Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 19/63] net/ice/base: fix memory leak issue Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 20/63] net/ice/base: check root pointer for validity Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 21/63] net/ice/base: fix type-mismatch Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 22/63] net/ice/base: correct overrun Coverty hit Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 23/63] net/ice/base: update Boot Configuration Section read of NVM Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 24/63] net/ice/base: add support for NVM access commands Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 25/63] net/ice/base: add support for GTP and PPPoE protocols Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 26/63] net/ice/base: add locks for flow functions Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 27/63] net/ice/base: improve switch advanced rule Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 28/63] net/ice/base: move function declaration Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 29/63] net/ice/base: add 16-byte Flex Rx Descriptor Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 30/63] net/ice/base: add 32-byte Flex Rx Desc for Comms package Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 31/63] net/ice/base: update flag bits to current specification Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 32/63] net/ice/base: add more opcode and macros Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 33/63] net/ice/base: set status when global cfg lock is unavailable Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 34/63] net/ice/base: initialize driver NVM data earlier Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 35/63] net/ice/base: add function to configure Tx AQ command Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 36/63] net/ice/base: add support for not locking sideband queue Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 37/63] net/ice/base: associate recipes by profile type Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 38/63] net/ice/base: return switch error on invalid match criteria Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 39/63] net/ice/base: update UDP tunnel switch training packets Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 40/63] net/ice/base: improve switch chained recipe Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 41/63] net/ice/base: move and add some help function and macros Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 42/63] net/ice/base: add routine for tunnel port query Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 43/63] net/ice/base: ptype group consolidation Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 44/63] net/ice/base: fix for RSS hash on inner UDP port Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 45/63] net/ice/base: packet encapsulation for RSS Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 46/63] net/ice/base: add RSS support for PPPoE and GTPU Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 47/63] net/ice/base: remove unnecessary conditional check Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 48/63] net/ice/base: fix flag settings in AQ call Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 49/63] net/ice/base: refactor removal of VLAN promiscuous rules Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 50/63] net/ice/base: maximize switch recipe words per line Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 51/63] net/ice/base: update switch training packets with open ports Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 52/63] net/ice/base: remove unnecessary dummy packet finding Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 53/63] net/ice/base: remove unnecessary if branch Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 54/63] net/ice/base: correct abbreviations Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 55/63] net/ice/base: update to register definition file Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 56/63] net/ice/base: replace open-code duplication Qi Zhang
2019-08-26 10:50 ` [dpdk-dev] [PATCH 57/63] net/ice/base: delay less Qi Zhang
2019-08-26 10:51 ` [dpdk-dev] [PATCH 58/63] net/ice/base: add AQC get link topology handle support Qi Zhang
2019-08-26 10:51 ` [dpdk-dev] [PATCH 59/63] net/ice/base: remove Rx flex descriptor programming Qi Zhang
2019-08-26 10:51 ` [dpdk-dev] [PATCH 60/63] net/ice/base: enable RSS with ether layer for PPPoE Qi Zhang
2019-08-26 10:51 ` [dpdk-dev] [PATCH 61/63] net/ice/base: add GENEVE offset Qi Zhang
2019-08-26 17:53 ` Dziggel, Douglas A
2019-08-26 10:51 ` [dpdk-dev] [PATCH 62/63] net/ice/base: update profile to recipe bitmap array Qi Zhang
2019-08-26 10:51 ` [dpdk-dev] [PATCH 63/63] net/ice/base: ignore inverse switch recipes Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH 00/63 v2] net/ice/base: update base code Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 01/63] net/ice/base: enhance NVM read Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 02/63] net/ice/base: add function to get FW mode Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 03/63] net/ice/base: add support for NVM rollback detection Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 04/63] net/ice/base: add support to init RXDID descs fields Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 05/63] net/ice/base: store number of functions for the device Qi Zhang
2019-08-29 2:35 ` [dpdk-dev] [PATCH v2 06/63] net/ice/base: add read PBA module function Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 07/63] net/ice/base: correct argument port info Qi Zhang
2019-08-29 2:36 ` Qi Zhang [this message]
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 09/63] net/ice/base: add SFF EEPROM AQ Command Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 10/63] net/ice/base: improve debug print message Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 11/63] net/ice/base: add capabilities when in safe mode Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 12/63] net/ice/base: add helper functions for PHY caching Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 13/63] net/ice/base: add support for reading REPC statistics Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 14/63] net/ice/base: adjust DCB INIT for SW mode Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 15/63] net/ice/base: add NVM pkg flag Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 16/63] net/ice/base: move VSI to VSI group Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 17/63] net/ice/base: enable masking for RSS and FD field vectors Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 18/63] net/ice/base: resolve static analysis issues Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 19/63] net/ice/base: fix memory leak issue Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 20/63] net/ice/base: check root pointer for validity Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 21/63] net/ice/base: fix type-mismatch Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 22/63] net/ice/base: correct overrun Coverty hit Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 23/63] net/ice/base: update Boot Configuration Section read of NVM Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 24/63] net/ice/base: add support for NVM access commands Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 25/63] net/ice/base: add support for GTP and PPPoE protocols Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 26/63] net/ice/base: add locks for flow functions Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 27/63] net/ice/base: improve switch advanced rule Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 28/63] net/ice/base: move function declaration Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 29/63] net/ice/base: add 16-byte Flex Rx Descriptor Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 30/63] net/ice/base: add 32-byte Flex Rx Desc Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 31/63] net/ice/base: update flag bits Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 32/63] net/ice/base: add more opcode and macros Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 33/63] net/ice/base: set status when global cfg lock is unavailable Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 34/63] net/ice/base: initialize driver NVM data earlier Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 35/63] net/ice/base: add function to configure Tx AQ command Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 36/63] net/ice/base: add support for not locking sideband queue Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 37/63] net/ice/base: associate recipes by profile type Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 38/63] net/ice/base: return switch error on invalid match criteria Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 39/63] net/ice/base: update UDP tunnel switch training packets Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 40/63] net/ice/base: improve switch chained recipe Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 41/63] net/ice/base: move and add some help function and macros Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 42/63] net/ice/base: add routine for tunnel port query Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 43/63] net/ice/base: ptype group consolidation Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 44/63] net/ice/base: fix for RSS hash on inner UDP port Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 45/63] net/ice/base: packet encapsulation for RSS Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 46/63] net/ice/base: add RSS support for PPPoE and GTPU Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 47/63] net/ice/base: remove unnecessary conditional check Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 48/63] net/ice/base: fix flag settings in AQ call Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 49/63] net/ice/base: refactor removal of VLAN promiscuous rules Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 50/63] net/ice/base: maximize switch recipe words per line Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 51/63] net/ice/base: update switch training packets with open ports Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 52/63] net/ice/base: remove unnecessary dummy packet finding Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 53/63] net/ice/base: remove unnecessary if branch Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 54/63] net/ice/base: correct abbreviations Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 55/63] net/ice/base: update to register definition file Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 56/63] net/ice/base: replace open-code duplication Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 57/63] net/ice/base: delay less Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 58/63] net/ice/base: add AQC get link topology handle support Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 59/63] net/ice/base: remove Rx flex descriptor programming Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 60/63] net/ice/base: enable RSS with ether layer for PPPoE Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 61/63] net/ice/base: add GENEVE offset Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 62/63] net/ice/base: update profile to recipe bitmap array Qi Zhang
2019-08-29 2:36 ` [dpdk-dev] [PATCH v2 63/63] net/ice/base: ignore inverse switch recipes Qi Zhang
2019-08-30 9:44 ` [dpdk-dev] [PATCH 00/63 v2] net/ice/base: update base code Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829023656.8220-9-qi.z.zhang@intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=paul.m.stillwell.jr@intel.com \
--cc=qiming.yang@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=xiaolong.ye@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).