DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ye Xiaolong <xiaolong.ye@intel.com>
To: Di ChenxuX <chenxux.di@intel.com>
Cc: dev@dpdk.org, Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Beilei Xing <beilei.xing@intel.com>,
	Qi Zhang <qi.z.zhang@intel.com>,
	Yang Qiming <qiming.yang@intel.com>
Subject: Re: [dpdk-dev] [PATCH 1/5] net/e1000: release port upon close
Date: Mon, 2 Sep 2019 23:59:59 +0800	[thread overview]
Message-ID: <20190902155959.GC4325@intel.com> (raw)
In-Reply-To: <20190902102745.66695-2-chenxux.di@intel.com>

On 09/02, Di ChenxuX wrote:
>Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
> for the port can be freed by rte_eth_dev_close().
>
>Signed-off-by: Di ChenxuX <chenxux.di@intel.com>
>---
> drivers/net/e1000/e1000_ethdev.h |   1 +
> drivers/net/e1000/igb_ethdev.c   | 142 +++++++++++++++++--------------

You also need to do the migration for the em_ethdev.c.

> 2 files changed, 81 insertions(+), 62 deletions(-)
>
>diff --git a/drivers/net/e1000/e1000_ethdev.h b/drivers/net/e1000/e1000_ethdev.h
>index 01ff9433b..67785fb67 100644
>--- a/drivers/net/e1000/e1000_ethdev.h
>+++ b/drivers/net/e1000/e1000_ethdev.h
>@@ -282,6 +282,7 @@ struct e1000_adapter {
> 	struct e1000_vf_info    *vfdata;
> 	struct e1000_filter_info filter;
> 	bool stopped;
>+	bool closed;

closed is not needed.

Thanks,
Xiaolong

> 	struct rte_timecounter  systime_tc;
> 	struct rte_timecounter  rx_tstamp_tc;
> 	struct rte_timecounter  tx_tstamp_tc;
>diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
>index fec2b4289..022c61c7c 100644
>--- a/drivers/net/e1000/igb_ethdev.c
>+++ b/drivers/net/e1000/igb_ethdev.c
>@@ -843,6 +843,11 @@ eth_igb_dev_init(struct rte_eth_dev *eth_dev)
> 	rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.addr,
> 			&eth_dev->data->mac_addrs[0]);
> 
>+	/* Pass the information to the rte_eth_dev_close() that it should also
>+	 * release the private port resources.
>+	 */
>+	eth_dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
>+
> 	/* initialize the vfta */
> 	memset(shadow_vfta, 0, sizeof(*shadow_vfta));
> 
>@@ -856,6 +861,7 @@ eth_igb_dev_init(struct rte_eth_dev *eth_dev)
> 	}
> 	hw->mac.get_link_status = 1;
> 	adapter->stopped = 0;
>+	adapter->closed = 0;
> 
> 	/* Indicate SOL/IDER usage */
> 	if (e1000_check_reset_block(hw) < 0) {
>@@ -912,62 +918,17 @@ eth_igb_dev_init(struct rte_eth_dev *eth_dev)
> static int
> eth_igb_dev_uninit(struct rte_eth_dev *eth_dev)
> {
>-	struct rte_pci_device *pci_dev;
>-	struct rte_intr_handle *intr_handle;
>-	struct e1000_hw *hw;
> 	struct e1000_adapter *adapter =
> 		E1000_DEV_PRIVATE(eth_dev->data->dev_private);
>-	struct e1000_filter_info *filter_info =
>-		E1000_DEV_PRIVATE_TO_FILTER_INFO(eth_dev->data->dev_private);
> 
> 	PMD_INIT_FUNC_TRACE();
> 
> 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> 		return -EPERM;
> 
>-	hw = E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
>-	pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
>-	intr_handle = &pci_dev->intr_handle;
>-
>-	if (adapter->stopped == 0)
>+	if (adapter->closed == 0)
> 		eth_igb_close(eth_dev);
> 
>-	eth_dev->dev_ops = NULL;
>-	eth_dev->rx_pkt_burst = NULL;
>-	eth_dev->tx_pkt_burst = NULL;
>-
>-	/* Reset any pending lock */
>-	igb_reset_swfw_lock(hw);
>-
>-	/* uninitialize PF if max_vfs not zero */
>-	igb_pf_host_uninit(eth_dev);
>-
>-	/* disable uio intr before callback unregister */
>-	rte_intr_disable(intr_handle);
>-	rte_intr_callback_unregister(intr_handle,
>-				     eth_igb_interrupt_handler, eth_dev);
>-
>-	/* clear the SYN filter info */
>-	filter_info->syn_info = 0;
>-
>-	/* clear the ethertype filters info */
>-	filter_info->ethertype_mask = 0;
>-	memset(filter_info->ethertype_filters, 0,
>-		E1000_MAX_ETQF_FILTERS * sizeof(struct igb_ethertype_filter));
>-
>-	/* clear the rss filter info */
>-	memset(&filter_info->rss_info, 0,
>-		sizeof(struct igb_rte_flow_rss_conf));
>-
>-	/* remove all ntuple filters of the device */
>-	igb_ntuple_filter_uninit(eth_dev);
>-
>-	/* remove all flex filters of the device */
>-	igb_flex_filter_uninit(eth_dev);
>-
>-	/* clear all the filters list */
>-	igb_filterlist_flush(eth_dev);
>-
> 	return 0;
> }
> 
>@@ -1010,6 +971,7 @@ eth_igbvf_dev_init(struct rte_eth_dev *eth_dev)
> 	hw->vendor_id = pci_dev->id.vendor_id;
> 	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
> 	adapter->stopped = 0;
>+	adapter->closed = 0;
> 
> 	/* Initialize the shared code (base driver) */
> 	diag = e1000_setup_init_funcs(hw, TRUE);
>@@ -1038,6 +1000,11 @@ eth_igbvf_dev_init(struct rte_eth_dev *eth_dev)
> 		return -ENOMEM;
> 	}
> 
>+	/* Pass the information to the rte_eth_dev_close() that it should also
>+	 * release the private port resources.
>+	 */
>+	eth_dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
>+
> 	/* Generate a random MAC address, if none was assigned by PF. */
> 	if (rte_is_zero_ether_addr(perm_addr)) {
> 		rte_eth_random_addr(perm_addr->addr_bytes);
>@@ -1079,26 +1046,15 @@ eth_igbvf_dev_uninit(struct rte_eth_dev *eth_dev)
> {
> 	struct e1000_adapter *adapter =
> 		E1000_DEV_PRIVATE(eth_dev->data->dev_private);
>-	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
> 
> 	PMD_INIT_FUNC_TRACE();
> 
> 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> 		return -EPERM;
> 
>-	if (adapter->stopped == 0)
>+	if (adapter->closed == 0)
> 		igbvf_dev_close(eth_dev);
> 
>-	eth_dev->dev_ops = NULL;
>-	eth_dev->rx_pkt_burst = NULL;
>-	eth_dev->tx_pkt_burst = NULL;
>-
>-	/* disable uio intr before callback unregister */
>-	rte_intr_disable(&pci_dev->intr_handle);
>-	rte_intr_callback_unregister(&pci_dev->intr_handle,
>-				     eth_igbvf_interrupt_handler,
>-				     (void *)eth_dev);
>-
> 	return 0;
> }
> 
>@@ -1506,6 +1462,11 @@ eth_igb_stop(struct rte_eth_dev *dev)
> 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> 	struct rte_eth_link link;
> 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
>+	struct e1000_adapter *adapter =
>+		E1000_DEV_PRIVATE(dev->data->dev_private);
>+
>+	if (adapter->stopped)
>+		return;
> 
> 	eth_igb_rxtx_control(dev, false);
> 
>@@ -1547,6 +1508,8 @@ eth_igb_stop(struct rte_eth_dev *dev)
> 		rte_free(intr_handle->intr_vec);
> 		intr_handle->intr_vec = NULL;
> 	}
>+
>+	adapter->stopped = 1;
> }
> 
> static int
>@@ -1579,14 +1542,15 @@ static void
> eth_igb_close(struct rte_eth_dev *dev)
> {
> 	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>-	struct e1000_adapter *adapter =
>-		E1000_DEV_PRIVATE(dev->data->dev_private);
> 	struct rte_eth_link link;
> 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
>+	struct e1000_filter_info *filter_info =
>+		E1000_DEV_PRIVATE_TO_FILTER_INFO(dev->data->dev_private);
>+	struct e1000_adapter *adapter =
>+		E1000_DEV_PRIVATE(dev->data->dev_private);
> 
> 	eth_igb_stop(dev);
>-	adapter->stopped = 1;
> 
> 	e1000_phy_hw_reset(hw);
> 	igb_release_manageability(hw);
>@@ -1610,6 +1574,42 @@ eth_igb_close(struct rte_eth_dev *dev)
> 
> 	memset(&link, 0, sizeof(link));
> 	rte_eth_linkstatus_set(dev, &link);
>+
>+	dev->dev_ops = NULL;
>+	dev->rx_pkt_burst = NULL;
>+	dev->tx_pkt_burst = NULL;
>+
>+	/* Reset any pending lock */
>+	igb_reset_swfw_lock(hw);
>+
>+	/* uninitialize PF if max_vfs not zero */
>+	igb_pf_host_uninit(dev);
>+
>+	rte_intr_callback_unregister(intr_handle,
>+				     eth_igb_interrupt_handler, dev);
>+
>+	/* clear the SYN filter info */
>+	filter_info->syn_info = 0;
>+
>+	/* clear the ethertype filters info */
>+	filter_info->ethertype_mask = 0;
>+	memset(filter_info->ethertype_filters, 0,
>+		E1000_MAX_ETQF_FILTERS * sizeof(struct igb_ethertype_filter));
>+
>+	/* clear the rss filter info */
>+	memset(&filter_info->rss_info, 0,
>+		sizeof(struct igb_rte_flow_rss_conf));
>+
>+	/* remove all ntuple filters of the device */
>+	igb_ntuple_filter_uninit(dev);
>+
>+	/* remove all flex filters of the device */
>+	igb_flex_filter_uninit(dev);
>+
>+	/* clear all the filters list */
>+	igb_filterlist_flush(dev);
>+
>+	adapter->closed = 1;
> }
> 
> /*
>@@ -3331,6 +3331,11 @@ igbvf_dev_stop(struct rte_eth_dev *dev)
> {
> 	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
>+	struct e1000_adapter *adapter =
>+		E1000_DEV_PRIVATE(dev->data->dev_private);
>+
>+	if (adapter->stopped == 1)
>+		return;
> 
> 	PMD_INIT_FUNC_TRACE();
> 
>@@ -3353,6 +3358,8 @@ igbvf_dev_stop(struct rte_eth_dev *dev)
> 		rte_free(intr_handle->intr_vec);
> 		intr_handle->intr_vec = NULL;
> 	}
>+
>+	adapter->stopped = 1;
> }
> 
> static void
>@@ -3362,13 +3369,14 @@ igbvf_dev_close(struct rte_eth_dev *dev)
> 	struct e1000_adapter *adapter =
> 		E1000_DEV_PRIVATE(dev->data->dev_private);
> 	struct rte_ether_addr addr;
>+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> 
> 	PMD_INIT_FUNC_TRACE();
> 
> 	e1000_reset_hw(hw);
> 
> 	igbvf_dev_stop(dev);
>-	adapter->stopped = 1;
>+
> 	igb_dev_free_queues(dev);
> 
> 	/**
>@@ -3379,6 +3387,16 @@ igbvf_dev_close(struct rte_eth_dev *dev)
> 
> 	memset(&addr, 0, sizeof(addr));
> 	igbvf_default_mac_addr_set(dev, &addr);
>+
>+	dev->dev_ops = NULL;
>+	dev->rx_pkt_burst = NULL;
>+	dev->tx_pkt_burst = NULL;
>+
>+	rte_intr_callback_unregister(&pci_dev->intr_handle,
>+				     eth_igbvf_interrupt_handler,
>+				     (void *)dev);
>+
>+	adapter->closed = 1;
> }
> 
> static void
>-- 
>2.17.1
>

  reply	other threads:[~2019-09-02 16:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-02 10:27 [dpdk-dev] [PATCH 0/5] drivers/net: " Di ChenxuX
2019-09-02 10:27 ` [dpdk-dev] [PATCH 1/5] net/e1000: " Di ChenxuX
2019-09-02 15:59   ` Ye Xiaolong [this message]
2019-09-02 10:27 ` [dpdk-dev] [PATCH 2/5] net/fm10k: " Di ChenxuX
2019-09-02 10:27 ` [dpdk-dev] [PATCH 3/5] net/i40e: " Di ChenxuX
2019-09-02 10:27 ` [dpdk-dev] [PATCH 4/5] net/ice: " Di ChenxuX
2019-09-02 15:51   ` Ye Xiaolong
2019-09-02 10:27 ` [dpdk-dev] [PATCH 5/5] net/ixgbe: " Di ChenxuX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190902155959.GC4325@intel.com \
    --to=xiaolong.ye@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=chenxux.di@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=qiming.yang@intel.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).