From: Ivan Dyukov <i.dyukov@samsung.com>
To: dev@dpdk.org, i.dyukov@samsung.com, v.kuramshin@samsung.com,
thomas@monjalon.net, david.marchand@redhat.com,
ferruh.yigit@intel.com, arybchenko@solarflare.com
Cc: stable@dpdk.org
Subject: [dpdk-stable] [PATCH v1 3/3] examples: remove extra 'new line' in output
Date: Thu, 7 May 2020 21:26:03 +0300 [thread overview]
Message-ID: <20200507182604.30256-3-i.dyukov@samsung.com> (raw)
In-Reply-To: <20200507182604.30256-1-i.dyukov@samsung.com>
This patch removes extra 'new line' in few app examples
Fixes: d299106e8e (examples/ipsec-secgw: add IPsec sample application)
Fixes: d48415e1fe (examples/performance-thread: add l3fwd-thread app)
Fixes: 3fc5ca2f63 (kni: initial import)
Fixes: 387259bd6c (examples/l2fwd-crypto: add sample application)
Fixes: 20c78ac9ee (examples/vm_power_mgr: add port initialisation)
Fixes: e64833f227 (examples/l2fwd-keepalive: add sample application)
Fixes: de3cfa2c98 (sched: initial import)
Fixes: d7937e2e3d (power: initial import)
Fixes: 204896f8d6 (examples/l2fwd-jobstats: add new example)
Fixes: 4ff457986f (examples/l2fwd-event: add default poll mode routines)
Fixes: 39aad0e88c (examples/flow_distributor: new example to demonstrate EFD)
Fixes: c8e6ceeceb (examples/ioat: add new sample app for ioat driver)
Fixes: 361b2e9559 (acl: new sample l3fwd-acl)
Fixes: cc8f4d020c (examples/ip_reassembly: initial import)
Cc: stable@dpdk.org
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
---
examples/ioat/ioatfwd.c | 2 +-
examples/ip_reassembly/main.c | 2 +-
examples/ipsec-secgw/ipsec-secgw.c | 2 +-
examples/kni/main.c | 2 +-
examples/l2fwd-crypto/main.c | 2 +-
examples/l2fwd-event/main.c | 2 +-
examples/l2fwd-jobstats/main.c | 2 +-
examples/l2fwd-keepalive/main.c | 2 +-
examples/l3fwd-acl/main.c | 2 +-
examples/l3fwd-power/main.c | 2 +-
examples/performance-thread/l3fwd-thread/main.c | 2 +-
examples/qos_sched/init.c | 2 +-
examples/server_node_efd/server/init.c | 2 +-
examples/vm_power_manager/main.c | 2 +-
14 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 7255ff3c9..53de23179 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -718,7 +718,7 @@ check_link_status(uint32_t port_mask)
"Port %d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
link_status = 1;
} else
printf("Port %d Link Down\n", portid);
diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
index e34d8f0e1..494d7ee77 100644
--- a/examples/ip_reassembly/main.c
+++ b/examples/ip_reassembly/main.c
@@ -736,7 +736,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 6d02341de..5b3690ce9 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -1800,7 +1800,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up - speed %u Mbps -%s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 29fc37e1f..6b4ab3b5b 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -683,7 +683,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up - speed %uMbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index 61d78295d..fcb55c370 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -1756,7 +1756,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/l2fwd-event/main.c b/examples/l2fwd-event/main.c
index 9cc29d732..9593ef11e 100644
--- a/examples/l2fwd-event/main.c
+++ b/examples/l2fwd-event/main.c
@@ -394,7 +394,7 @@ check_all_ports_link_status(struct l2fwd_resources *rsrc,
"Port%d Link Up. Speed %u Mbps - %s\n",
port_id, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", port_id);
continue;
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index c1ca100ed..396fd89db 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -710,7 +710,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index 2ae5a3c6a..3a6bf2e47 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -475,7 +475,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index cccf81929..f22fca732 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -1839,7 +1839,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 293b3da4a..c8339ee5a 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -1959,7 +1959,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Mbps - %s\n", (uint8_t)portid,
(unsigned)link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n",
(uint8_t)portid);
diff --git a/examples/performance-thread/l3fwd-thread/main.c b/examples/performance-thread/l3fwd-thread/main.c
index 43a5b9248..84c1d7b3a 100644
--- a/examples/performance-thread/l3fwd-thread/main.c
+++ b/examples/performance-thread/l3fwd-thread/main.c
@@ -3457,7 +3457,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
index 0a17e0d4d..9626c15b8 100644
--- a/examples/qos_sched/init.c
+++ b/examples/qos_sched/init.c
@@ -164,7 +164,7 @@ app_init_port(uint16_t portid, struct rte_mempool *mp)
printf(" Link Up - speed %u Mbps - %s\n",
(uint32_t) link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
} else {
printf(" Link Down\n");
}
diff --git a/examples/server_node_efd/server/init.c b/examples/server_node_efd/server/init.c
index 00e2e4059..378a74fa5 100644
--- a/examples/server_node_efd/server/init.c
+++ b/examples/server_node_efd/server/init.c
@@ -272,7 +272,7 @@ check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
info->id[portid],
link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n",
info->id[portid]);
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
index dc6afb132..273bfec29 100644
--- a/examples/vm_power_manager/main.c
+++ b/examples/vm_power_manager/main.c
@@ -272,7 +272,7 @@ check_all_ports_link_status(uint32_t port_mask)
"Mbps - %s\n", (uint16_t)portid,
(unsigned int)link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
- ("full-duplex") : ("half-duplex\n"));
+ ("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n",
(uint16_t)portid);
--
2.17.1
next prev parent reply other threads:[~2020-05-07 18:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5595669.UjTJXf6HLC@thomas>
[not found] ` <CGME20200507182612eucas1p10d955ce6857f01fd85a5268d10edc489@eucas1p1.samsung.com>
2020-05-07 18:26 ` [dpdk-stable] [PATCH v1 1/3] ethdev: " Ivan Dyukov
[not found] ` <CGME20200507182615eucas1p10a1ad94553507df541e2c43cf952722b@eucas1p1.samsung.com>
2020-05-07 18:26 ` [dpdk-stable] [PATCH v1 2/3] examples: " Ivan Dyukov
[not found] ` <CGME20200507182616eucas1p2b6d7e7ac68b1b0fe8b1d71dd112fcc9d@eucas1p2.samsung.com>
2020-05-07 18:26 ` Ivan Dyukov [this message]
2020-05-12 2:08 ` [dpdk-stable] [dpdk-dev] [PATCH v1 1/3] ethdev: " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200507182604.30256-3-i.dyukov@samsung.com \
--to=i.dyukov@samsung.com \
--cc=arybchenko@solarflare.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=v.kuramshin@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).