From: <guyk@marvell.com>
To: <orika@mellanox.com>, <jerinj@marvell.com>,
<ndabilpuram@marvell.com>, <thomas@monjalon.net>, <mdr@ashroe.eu>,
<nhorman@tuxdriver.com>, <bruce.richardson@intel.com>,
<anatoly.burakov@intel.com>, <john.mcnamara@intel.com>,
<marko.kovacevic@intel.com>
Cc: <dev@dpdk.org>, <smadarf@marvell.com>, <dovrat@marvell.com>,
<guyk@marvell.com>, <lironh@marvell.com>
Subject: [dpdk-dev] [PATCH v3 1/3] common/octeontx2: add REE definitions and logging support
Date: Tue, 13 Oct 2020 13:10:09 +0300 [thread overview]
Message-ID: <20201013101011.21015-2-guyk@marvell.com> (raw)
In-Reply-To: <20201013101011.21015-1-guyk@marvell.com>
From: Guy Kaneti <guyk@marvell.com>
Add REE mbox msg definitions, RVU and REE HW definitions
Signed-off-by: Guy Kaneti <guyk@marvell.com>
---
drivers/common/octeontx2/hw/otx2_ree.h | 27 +++++
drivers/common/octeontx2/hw/otx2_rvu.h | 5 +
drivers/common/octeontx2/otx2_common.c | 1 +
drivers/common/octeontx2/otx2_common.h | 5 +
drivers/common/octeontx2/otx2_mbox.h | 103 ++++++++++++++++++
.../rte_common_octeontx2_version.map | 1 +
6 files changed, 142 insertions(+)
create mode 100644 drivers/common/octeontx2/hw/otx2_ree.h
diff --git a/drivers/common/octeontx2/hw/otx2_ree.h b/drivers/common/octeontx2/hw/otx2_ree.h
new file mode 100644
index 000000000..b7481f125
--- /dev/null
+++ b/drivers/common/octeontx2/hw/otx2_ree.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef __OTX2_REE_HW_H__
+#define __OTX2_REE_HW_H__
+
+/* REE BAR0*/
+#define REE_AF_REEXM_MAX_MATCH (0x80c8)
+
+/* REE BAR02 */
+#define REE_LF_MISC_INT (0x300)
+#define REE_LF_DONE_INT (0x120)
+
+#define REE_AF_QUEX_GMCTL(a) (0x800 | (a) << 3)
+
+#define REE_AF_INT_VEC_RAS (0x0ull)
+#define REE_AF_INT_VEC_RVU (0x1ull)
+#define REE_AF_INT_VEC_QUE_DONE (0x2ull)
+#define REE_AF_INT_VEC_AQ (0x3ull)
+
+/* ENUMS */
+
+#define REE_LF_INT_VEC_QUE_DONE (0x0ull)
+#define REE_LF_INT_VEC_MISC (0x1ull)
+
+#endif /* __OTX2_REE_HW_H__*/
diff --git a/drivers/common/octeontx2/hw/otx2_rvu.h b/drivers/common/octeontx2/hw/otx2_rvu.h
index 330bfb37f..072515207 100644
--- a/drivers/common/octeontx2/hw/otx2_rvu.h
+++ b/drivers/common/octeontx2/hw/otx2_rvu.h
@@ -130,6 +130,7 @@
#define RVU_BLOCK_TYPE_RAD (0xdull)
#define RVU_BLOCK_TYPE_DFA (0xeull)
#define RVU_BLOCK_TYPE_HNA (0xfull)
+#define RVU_BLOCK_TYPE_REE (0xeull)
#define RVU_BLOCK_ADDR_RVUM (0x0ull)
#define RVU_BLOCK_ADDR_LMT (0x1ull)
@@ -146,6 +147,8 @@
#define RVU_BLOCK_ADDR_NDC2 (0xeull)
#define RVU_BLOCK_ADDR_R_END (0x1full)
#define RVU_BLOCK_ADDR_R_START (0x14ull)
+#define RVU_BLOCK_ADDR_REE0 (0x14ull)
+#define RVU_BLOCK_ADDR_REE1 (0x15ull)
#define RVU_VF_INT_VEC_MBOX (0x0ull)
@@ -167,6 +170,7 @@
#define NPA_AF_BAR2_SEL (0x9000000ull)
#define CPT_AF_BAR2_SEL (0x9000000ull)
#define RVU_AF_BAR2_SEL (0x9000000ull)
+#define REE_AF_BAR2_SEL (0x9000000ull)
#define AF_BAR2_ALIASX(a, b) \
(0x9100000ull | (uint64_t)(a) << 12 | (uint64_t)(b))
@@ -177,6 +181,7 @@
#define NPA_AF_BAR2_ALIASX(a, b) AF_BAR2_ALIASX(0, b)
#define CPT_AF_BAR2_ALIASX(a, b) AF_BAR2_ALIASX(a, b)
#define RVU_AF_BAR2_ALIASX(a, b) AF_BAR2_ALIASX(a, b)
+#define REE_AF_BAR2_ALIASX(a, b) AF_BAR2_ALIASX(a, b)
/* Structures definitions */
diff --git a/drivers/common/octeontx2/otx2_common.c b/drivers/common/octeontx2/otx2_common.c
index b292e999a..d23c50242 100644
--- a/drivers/common/octeontx2/otx2_common.c
+++ b/drivers/common/octeontx2/otx2_common.c
@@ -213,3 +213,4 @@ RTE_LOG_REGISTER(otx2_logtype_sso, pmd.event.octeontx2, NOTICE);
RTE_LOG_REGISTER(otx2_logtype_tim, pmd.event.octeontx2.timer, NOTICE);
RTE_LOG_REGISTER(otx2_logtype_dpi, pmd.raw.octeontx2.dpi, NOTICE);
RTE_LOG_REGISTER(otx2_logtype_ep, pmd.raw.octeontx2.ep, NOTICE);
+RTE_LOG_REGISTER(otx2_logtype_ree, pmd.regex.octeontx2, NOTICE);
diff --git a/drivers/common/octeontx2/otx2_common.h b/drivers/common/octeontx2/otx2_common.h
index 2168cde4d..b6779f710 100644
--- a/drivers/common/octeontx2/otx2_common.h
+++ b/drivers/common/octeontx2/otx2_common.h
@@ -21,6 +21,7 @@
#include "hw/otx2_sso.h"
#include "hw/otx2_ssow.h"
#include "hw/otx2_tim.h"
+#include "hw/otx2_ree.h"
/* Alignment */
#define OTX2_ALIGN 128
@@ -96,6 +97,7 @@ extern int otx2_logtype_tm;
extern int otx2_logtype_tim;
extern int otx2_logtype_dpi;
extern int otx2_logtype_ep;
+extern int otx2_logtype_ree;
#define otx2_err(fmt, args...) \
RTE_LOG(ERR, PMD, "%s():%u " fmt "\n", \
@@ -119,6 +121,7 @@ extern int otx2_logtype_ep;
#define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__)
#define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__)
#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__)
+#define otx2_ree_dbg(fmt, ...) otx2_dbg(ree, fmt, ##__VA_ARGS__)
/* PCI IDs */
#define PCI_VENDOR_ID_CAVIUM 0x177D
@@ -136,6 +139,8 @@ extern int otx2_logtype_ep;
#define PCI_DEVID_OCTEONTX2_EP_VF 0xB203 /* OCTEON TX2 EP mode */
#define PCI_DEVID_OCTEONTX2_RVU_SDP_PF 0xA0f6
#define PCI_DEVID_OCTEONTX2_RVU_SDP_VF 0xA0f7
+#define PCI_DEVID_OCTEONTX2_RVU_REE_PF 0xA0f4
+#define PCI_DEVID_OCTEONTX2_RVU_REE_VF 0xA0f5
/*
* REVID for RVU PCIe devices.
diff --git a/drivers/common/octeontx2/otx2_mbox.h b/drivers/common/octeontx2/otx2_mbox.h
index 78de432e7..aebb217ec 100644
--- a/drivers/common/octeontx2/otx2_mbox.h
+++ b/drivers/common/octeontx2/otx2_mbox.h
@@ -199,6 +199,19 @@ M(CPT_INLINE_IPSEC_CFG, 0xA04, cpt_inline_ipsec_cfg, \
M(CPT_RX_INLINE_LF_CFG, 0xBFE, cpt_rx_inline_lf_cfg, \
cpt_rx_inline_lf_cfg_msg, msg_rsp) \
M(CPT_GET_CAPS, 0xBFD, cpt_caps_get, msg_req, cpt_caps_rsp_msg) \
+/* REE mbox IDs (range 0xE00 - 0xFFF) */ \
+M(REE_CONFIG_LF, 0xE01, ree_config_lf, ree_lf_req_msg, \
+ msg_rsp) \
+M(REE_RD_WR_REGISTER, 0xE02, ree_rd_wr_register, ree_rd_wr_reg_msg, \
+ ree_rd_wr_reg_msg) \
+M(REE_RULE_DB_PROG, 0xE03, ree_rule_db_prog, \
+ ree_rule_db_prog_req_msg, \
+ msg_rsp) \
+M(REE_RULE_DB_LEN_GET, 0xE04, ree_rule_db_len_get, ree_req_msg, \
+ ree_rule_db_len_rsp_msg) \
+M(REE_RULE_DB_GET, 0xE05, ree_rule_db_get, \
+ ree_rule_db_get_req_msg, \
+ ree_rule_db_get_rsp_msg) \
/* NPC mbox IDs (range 0x6000 - 0x7FFF) */ \
M(NPC_MCAM_ALLOC_ENTRY, 0x6000, npc_mcam_alloc_entry, \
npc_mcam_alloc_entry_req, \
@@ -1660,6 +1673,96 @@ struct tim_enable_rsp {
uint32_t __otx2_io currentbucket;
};
+/* REE mailbox error codes
+ * Range 1001 - 1100.
+ */
+enum ree_af_status {
+ REE_AF_ERR_RULE_UNKNOWN_VALUE = -1001,
+ REE_AF_ERR_LF_NO_MORE_RESOURCES = -1002,
+ REE_AF_ERR_LF_INVALID = -1003,
+ REE_AF_ERR_ACCESS_DENIED = -1004,
+ REE_AF_ERR_RULE_DB_PARTIAL = -1005,
+ REE_AF_ERR_RULE_DB_EQ_BAD_VALUE = -1006,
+ REE_AF_ERR_RULE_DB_BLOCK_ALLOC_FAILED = -1007,
+ REE_AF_ERR_BLOCK_NOT_IMPLEMENTED = -1008,
+ REE_AF_ERR_RULE_DB_INC_OFFSET_TOO_BIG = -1009,
+ REE_AF_ERR_RULE_DB_OFFSET_TOO_BIG = -1010,
+ REE_AF_ERR_Q_IS_GRACEFUL_DIS = -1011,
+ REE_AF_ERR_Q_NOT_GRACEFUL_DIS = -1012,
+ REE_AF_ERR_RULE_DB_ALLOC_FAILED = -1013,
+ REE_AF_ERR_RULE_DB_TOO_BIG = -1014,
+ REE_AF_ERR_RULE_DB_GEQ_BAD_VALUE = -1015,
+ REE_AF_ERR_RULE_DB_LEQ_BAD_VALUE = -1016,
+ REE_AF_ERR_RULE_DB_WRONG_LENGTH = -1017,
+ REE_AF_ERR_RULE_DB_WRONG_OFFSET = -1018,
+ REE_AF_ERR_RULE_DB_BLOCK_TOO_BIG = -1019,
+ REE_AF_ERR_RULE_DB_SHOULD_FILL_REQUEST = -1020,
+ REE_AF_ERR_RULE_DBI_ALLOC_FAILED = -1021,
+ REE_AF_ERR_LF_WRONG_PRIORITY = -1022,
+ REE_AF_ERR_LF_SIZE_TOO_BIG = -1023,
+};
+
+/* REE mbox message formats */
+
+struct ree_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __otx2_io blkaddr;
+};
+
+struct ree_lf_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __otx2_io blkaddr;
+ uint32_t __otx2_io size;
+ uint8_t __otx2_io lf;
+ uint8_t __otx2_io pri;
+};
+
+struct ree_rule_db_prog_req_msg {
+ struct mbox_msghdr hdr;
+#define REE_RULE_DB_REQ_BLOCK_SIZE (MBOX_SIZE >> 1)
+ uint8_t __otx2_io rule_db[REE_RULE_DB_REQ_BLOCK_SIZE];
+ uint32_t __otx2_io blkaddr; /* REE0 or REE1 */
+ uint32_t __otx2_io total_len; /* total len of rule db */
+ uint32_t __otx2_io offset; /* offset of current rule db block */
+ uint16_t __otx2_io len; /* length of rule db block */
+ uint8_t __otx2_io is_last; /* is this the last block */
+ uint8_t __otx2_io is_incremental; /* is incremental flow */
+ uint8_t __otx2_io is_dbi; /* is rule db incremental */
+};
+
+struct ree_rule_db_get_req_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __otx2_io blkaddr;
+ uint32_t __otx2_io offset; /* retrieve db from this offset */
+ uint8_t __otx2_io is_dbi; /* is request for rule db incremental */
+};
+
+struct ree_rd_wr_reg_msg {
+ struct mbox_msghdr hdr;
+ uint64_t __otx2_io reg_offset;
+ uint64_t __otx2_io *ret_val;
+ uint64_t __otx2_io val;
+ uint32_t __otx2_io blkaddr;
+ uint8_t __otx2_io is_write;
+};
+
+struct ree_rule_db_len_rsp_msg {
+ struct mbox_msghdr hdr;
+ uint32_t __otx2_io blkaddr;
+ uint32_t __otx2_io len;
+ uint32_t __otx2_io inc_len;
+};
+
+struct ree_rule_db_get_rsp_msg {
+ struct mbox_msghdr hdr;
+#define REE_RULE_DB_RSP_BLOCK_SIZE (MBOX_DOWN_TX_SIZE - SZ_1K)
+ uint8_t __otx2_io rule_db[REE_RULE_DB_RSP_BLOCK_SIZE];
+ uint32_t __otx2_io total_len; /* total len of rule db */
+ uint32_t __otx2_io offset; /* offset of current rule db block */
+ uint16_t __otx2_io len; /* length of rule db block */
+ uint8_t __otx2_io is_last; /* is this the last block */
+};
+
__rte_internal
const char *otx2_mbox_id2name(uint16_t id);
int otx2_mbox_id2size(uint16_t id);
diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map
index 9a9969613..d269d70d8 100644
--- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
+++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
@@ -38,6 +38,7 @@ INTERNAL {
otx2_sso_pf_func_get;
otx2_sso_pf_func_set;
otx2_unregister_irq;
+ otx2_logtype_ree;
local: *;
};
--
2.28.0
next prev parent reply other threads:[~2020-10-13 10:12 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 12:24 [dpdk-dev] [PATCH 0/4] Add Marvell OCTEON TX2 regex driver guyk
2020-09-01 12:24 ` [dpdk-dev] [PATCH 1/4] common/octeontx2: add REE definitions and logging support guyk
2020-10-11 7:35 ` Liron Himi
2020-09-01 12:24 ` [dpdk-dev] [PATCH 2/4] regex/octeontx2: add build infra and device support guyk
2020-10-11 7:36 ` Liron Himi
2020-09-01 12:24 ` [dpdk-dev] [PATCH 3/4] usertools: add octeontx2 REE device binding guyk
2020-10-11 7:36 ` Liron Himi
2020-09-01 12:24 ` [dpdk-dev] [PATCH 4/4] doc: add Marvell OCTEON TX2 regex guide guyk
2020-10-11 7:36 ` Liron Himi
2020-10-08 6:31 ` [dpdk-dev] [PATCH 0/4] Add Marvell OCTEON TX2 regex driver Guy Kaneti
2020-10-11 21:23 ` Thomas Monjalon
2020-10-12 11:34 ` [dpdk-dev] [EXT] " Guy Kaneti
2020-10-12 11:31 ` [dpdk-dev] [PATCH v2 " guyk
2020-10-12 11:31 ` [dpdk-dev] [PATCH v2 1/4] common/octeontx2: add REE definitions and logging support guyk
2020-10-12 11:31 ` [dpdk-dev] [PATCH v2 2/4] regex/octeontx2: add build infra and device support guyk
2020-10-12 14:33 ` Thomas Monjalon
2020-10-12 17:06 ` [dpdk-dev] [EXT] " Guy Kaneti
2020-10-12 17:10 ` Thomas Monjalon
2020-10-12 17:13 ` Guy Kaneti
2020-10-12 17:19 ` Thomas Monjalon
2020-10-12 11:31 ` [dpdk-dev] [PATCH v2 3/4] usertools: add octeontx2 REE device binding guyk
2020-10-12 14:35 ` Thomas Monjalon
2020-10-12 11:31 ` [dpdk-dev] [PATCH v2 4/4] doc: add Marvell OCTEON TX2 regex guide guyk
2020-10-12 14:38 ` Thomas Monjalon
2020-10-12 17:09 ` [dpdk-dev] [EXT] " Guy Kaneti
2020-10-12 17:12 ` Thomas Monjalon
2020-10-13 10:10 ` [dpdk-dev] [PATCH v3 0/3] Add Marvell OCTEON TX2 regex driver guyk
2020-10-13 10:10 ` guyk [this message]
2020-10-14 8:18 ` [dpdk-dev] [PATCH v3 1/3] common/octeontx2: add REE definitions and logging support Thomas Monjalon
2020-10-13 10:10 ` [dpdk-dev] [PATCH v3 2/3] regex/octeontx2: add build infra and device support guyk
2020-10-14 8:26 ` Thomas Monjalon
2020-10-13 10:10 ` [dpdk-dev] [PATCH v3 3/3] usertools: add octeontx2 REE device binding guyk
2020-10-14 8:42 ` [dpdk-dev] [PATCH v3 0/3] Add Marvell OCTEON TX2 regex driver Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201013101011.21015-2-guyk@marvell.com \
--to=guyk@marvell.com \
--cc=anatoly.burakov@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=dovrat@marvell.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=lironh@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=mdr@ashroe.eu \
--cc=ndabilpuram@marvell.com \
--cc=nhorman@tuxdriver.com \
--cc=orika@mellanox.com \
--cc=smadarf@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).