From: Nalla Pradeep <pnalla@marvell.com>
To: Nalla Pradeep <pnalla@marvell.com>,
Radha Mohan Chintakuntla <radhac@marvell.com>,
Veerasenareddy Burru <vburru@marvell.com>
Cc: <jerinj@marvell.com>, <dev@dpdk.org>, <sburla@marvell.com>
Subject: [dpdk-dev] [PATCH v2 08/11] net/octeontx_ep: Setting up iq and oq registers
Date: Mon, 18 Jan 2021 09:35:59 +0000 [thread overview]
Message-ID: <20210118093602.5449-8-pnalla@marvell.com> (raw)
In-Reply-To: <20210118093602.5449-1-pnalla@marvell.com>
Configuring hardware registers with command queue(iq) and droq(oq)
parameters.
Signed-off-by: Nalla Pradeep <pnalla@marvell.com>
---
drivers/net/octeontx_ep/otx2_ep_vf.c | 124 ++++++++++++++++++++++++
drivers/net/octeontx_ep/otx_ep_common.h | 65 +++++++++++++
drivers/net/octeontx_ep/otx_ep_vf.c | 124 ++++++++++++++++++++++++
drivers/net/octeontx_ep/otx_ep_vf.h | 53 ++++++++++
4 files changed, 366 insertions(+)
diff --git a/drivers/net/octeontx_ep/otx2_ep_vf.c b/drivers/net/octeontx_ep/otx2_ep_vf.c
index e03d39f7dc..77850bcc7d 100644
--- a/drivers/net/octeontx_ep/otx2_ep_vf.c
+++ b/drivers/net/octeontx_ep/otx2_ep_vf.c
@@ -78,6 +78,127 @@ otx2_vf_setup_device_regs(struct otx_ep_device *otx_ep)
return 0;
}
+static void
+otx2_vf_setup_iq_regs(struct otx_ep_device *otx_ep, uint32_t iq_no)
+{
+ struct otx_ep_instr_queue *iq = otx_ep->instr_queue[iq_no];
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = otx2_read64(otx_ep->hw_addr + SDP_VF_R_IN_CONTROL(iq_no));
+
+ /* Wait till IDLE to set to 1, not supposed to configure BADDR
+ * as long as IDLE is 0
+ */
+ if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) {
+ do {
+ reg_val = otx2_read64(otx_ep->hw_addr +
+ SDP_VF_R_IN_CONTROL(iq_no));
+ } while (!(reg_val & SDP_VF_R_IN_CTL_IDLE));
+ }
+
+ /* Write the start of the input queue's ring and its size */
+ otx2_write64(iq->base_addr_dma, otx_ep->hw_addr +
+ SDP_VF_R_IN_INSTR_BADDR(iq_no));
+ otx2_write64(iq->nb_desc, otx_ep->hw_addr +
+ SDP_VF_R_IN_INSTR_RSIZE(iq_no));
+
+ /* Remember the doorbell & instruction count register addr
+ * for this queue
+ */
+ iq->doorbell_reg = (uint8_t *)otx_ep->hw_addr +
+ SDP_VF_R_IN_INSTR_DBELL(iq_no);
+ iq->inst_cnt_reg = (uint8_t *)otx_ep->hw_addr +
+ SDP_VF_R_IN_CNTS(iq_no);
+
+ otx_ep_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p",
+ iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
+
+ do {
+ reg_val = rte_read32(iq->inst_cnt_reg);
+ rte_write32(reg_val, iq->inst_cnt_reg);
+ } while (reg_val != 0);
+
+ /* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN INTR
+ * to raise
+ */
+ otx2_write64(0x3FFFFFFFFFFFFFUL,
+ otx_ep->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no));
+}
+
+static void
+otx2_vf_setup_oq_regs(struct otx_ep_device *otx_ep, uint32_t oq_no)
+{
+ volatile uint64_t reg_val = 0ull;
+ uint64_t oq_ctl = 0ull;
+ struct otx_ep_droq *droq = otx_ep->droq[oq_no];
+
+ /* Wait on IDLE to set to 1, supposed to configure BADDR
+ * as log as IDLE is 0
+ */
+ reg_val = otx2_read64(otx_ep->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) {
+ reg_val = otx2_read64(otx_ep->hw_addr +
+ SDP_VF_R_OUT_CONTROL(oq_no));
+ }
+
+ otx2_write64(droq->desc_ring_dma, otx_ep->hw_addr +
+ SDP_VF_R_OUT_SLIST_BADDR(oq_no));
+ otx2_write64(droq->nb_desc, otx_ep->hw_addr +
+ SDP_VF_R_OUT_SLIST_RSIZE(oq_no));
+
+ oq_ctl = otx2_read64(otx_ep->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ /* Clear the ISIZE and BSIZE (22-0) */
+ oq_ctl &= ~(0x7fffffull);
+
+ /* Populate the BSIZE (15-0) */
+ oq_ctl |= (droq->buffer_size & 0xffff);
+
+#ifndef BUFPTR_ONLY_MODE
+ /* Populate ISIZE(22-16) */
+ oq_ctl |= ((OTX_EP_RH_SIZE << 16) & 0x7fffff);
+#endif
+ otx2_write64(oq_ctl, otx_ep->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+ /* Mapped address of the pkt_sent and pkts_credit regs */
+ droq->pkts_sent_reg = (uint8_t *)otx_ep->hw_addr +
+ SDP_VF_R_OUT_CNTS(oq_no);
+ droq->pkts_credit_reg = (uint8_t *)otx_ep->hw_addr +
+ SDP_VF_R_OUT_SLIST_DBELL(oq_no);
+
+ rte_write64(0x3FFFFFFFFFFFFFUL,
+ otx_ep->hw_addr + SDP_VF_R_OUT_INT_LEVELS(oq_no));
+
+ /* Clear PKT_CNT register */
+ rte_write64(0xFFFFFFFFF, (uint8_t *)otx_ep->hw_addr +
+ SDP_VF_R_OUT_PKT_CNT(oq_no));
+
+ /* Clear the OQ doorbell */
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ while ((rte_read32(droq->pkts_credit_reg) != 0ull)) {
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ rte_delay_ms(1);
+ }
+ otx_ep_dbg("SDP_R[%d]_credit:%x", oq_no,
+ rte_read32(droq->pkts_credit_reg));
+
+ /* Clear the OQ_OUT_CNTS doorbell */
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+
+ otx_ep_dbg("SDP_R[%d]_sent: %x", oq_no,
+ rte_read32(droq->pkts_sent_reg));
+
+ while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) {
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+ rte_delay_ms(1);
+ }
+ otx_ep_dbg("SDP_R[%d]_sent: %x", oq_no,
+ rte_read32(droq->pkts_sent_reg));
+}
+
static const struct otx_ep_config default_otx2_ep_conf = {
/* IQ attributes */
.iq = {
@@ -132,6 +253,9 @@ otx2_ep_vf_setup_device(struct otx_ep_device *otx_ep)
otx2_info("SDP RPVF: %d", otx_ep->sriov_info.rings_per_vf);
+ otx_ep->fn_list.setup_iq_regs = otx2_vf_setup_iq_regs;
+ otx_ep->fn_list.setup_oq_regs = otx2_vf_setup_oq_regs;
+
otx_ep->fn_list.setup_device_regs = otx2_vf_setup_device_regs;
return 0;
diff --git a/drivers/net/octeontx_ep/otx_ep_common.h b/drivers/net/octeontx_ep/otx_ep_common.h
index 661e8e4c55..966e87a417 100644
--- a/drivers/net/octeontx_ep/otx_ep_common.h
+++ b/drivers/net/octeontx_ep/otx_ep_common.h
@@ -33,6 +33,33 @@
#define otx_ep_dbg(fmt, args...) \
otx_ep_printf(DEBUG, fmt, ##args)
+/* Input Request Header format */
+union otx_ep_instr_irh {
+ uint64_t u64;
+ struct {
+ /* Request ID */
+ uint64_t rid:16;
+
+ /* PCIe port to use for response */
+ uint64_t pcie_port:3;
+
+ /* Scatter indicator 1=scatter */
+ uint64_t scatter:1;
+
+ /* Size of Expected result OR no. of entries in scatter list */
+ uint64_t rlenssz:14;
+
+ /* Desired destination port for result */
+ uint64_t dport:6;
+
+ /* Opcode Specific parameters */
+ uint64_t param:8;
+
+ /* Opcode for the return packet */
+ uint64_t opcode:16;
+ } s;
+};
+
#define otx_ep_write64(value, base_addr, reg_off) \
{\
typeof(value) val = (value); \
@@ -42,6 +69,33 @@
rte_write64(val, ((base_addr) + off)); \
}
+/* Instruction Header - for OCTEON-TX models */
+typedef union otx_ep_instr_ih {
+ uint64_t u64;
+ struct {
+ /** Data Len */
+ uint64_t tlen:16;
+
+ /** Reserved */
+ uint64_t rsvd:20;
+
+ /** PKIND for OTX_EP */
+ uint64_t pkind:6;
+
+ /** Front Data size */
+ uint64_t fsz:6;
+
+ /** No. of entries in gather list */
+ uint64_t gsz:14;
+
+ /** Gather indicator 1=gather*/
+ uint64_t gather:1;
+
+ /** Reserved3 */
+ uint64_t reserved3:1;
+ } s;
+} otx_ep_instr_ih_t;
+
/* OTX_EP IQ request list */
struct otx_ep_instr_list {
void *buf;
@@ -244,6 +298,16 @@ struct otx_ep_droq {
/* The size of each buffer pointed by the buffer pointer. */
uint32_t buffer_size;
+ /** Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ void *pkts_credit_reg;
+
+ /** Pointer to the mapped packet sent register. OCTEON TX2 writes the
+ * number of packets DMA'ed to host memory in this register.
+ */
+ void *pkts_sent_reg;
+
/* Statistics for this DROQ. */
struct otx_ep_droq_stats stats;
@@ -259,6 +323,7 @@ struct otx_ep_droq {
/* Allocated size of info list. */
uint32_t info_alloc_size;
+
/* Memory zone **/
const struct rte_memzone *desc_ring_mz;
const struct rte_memzone *info_mz;
diff --git a/drivers/net/octeontx_ep/otx_ep_vf.c b/drivers/net/octeontx_ep/otx_ep_vf.c
index 7fad313982..076f8fe71e 100644
--- a/drivers/net/octeontx_ep/otx_ep_vf.c
+++ b/drivers/net/octeontx_ep/otx_ep_vf.c
@@ -91,6 +91,127 @@ otx_ep_setup_device_regs(struct otx_ep_device *otx_ep)
return 0;
}
+static void
+otx_ep_setup_iq_regs(struct otx_ep_device *otx_ep, uint32_t iq_no)
+{
+ struct otx_ep_instr_queue *iq = otx_ep->instr_queue[iq_no];
+ volatile uint64_t reg_val = 0ull;
+
+ reg_val = rte_read64(otx_ep->hw_addr + OTX_EP_R_IN_CONTROL(iq_no));
+
+ /* Wait till IDLE to set to 1, not supposed to configure BADDR
+ * as long as IDLE is 0
+ */
+ if (!(reg_val & OTX_EP_R_IN_CTL_IDLE)) {
+ do {
+ reg_val = rte_read64(otx_ep->hw_addr +
+ OTX_EP_R_IN_CONTROL(iq_no));
+ } while (!(reg_val & OTX_EP_R_IN_CTL_IDLE));
+ }
+
+ /* Write the start of the input queue's ring and its size */
+ otx_ep_write64(iq->base_addr_dma, otx_ep->hw_addr,
+ OTX_EP_R_IN_INSTR_BADDR(iq_no));
+ otx_ep_write64(iq->nb_desc, otx_ep->hw_addr,
+ OTX_EP_R_IN_INSTR_RSIZE(iq_no));
+
+ /* Remember the doorbell & instruction count register addr
+ * for this queue
+ */
+ iq->doorbell_reg = (uint8_t *)otx_ep->hw_addr +
+ OTX_EP_R_IN_INSTR_DBELL(iq_no);
+ iq->inst_cnt_reg = (uint8_t *)otx_ep->hw_addr +
+ OTX_EP_R_IN_CNTS(iq_no);
+
+ otx_ep_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p\n",
+ iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
+
+ do {
+ reg_val = rte_read32(iq->inst_cnt_reg);
+ rte_write32(reg_val, iq->inst_cnt_reg);
+ } while (reg_val != 0);
+
+ /* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN INTR
+ * to raise
+ */
+ /* reg_val = rte_read64(otx_ep->hw_addr +
+ * OTX_EP_R_IN_INT_LEVELS(iq_no));
+ */
+ reg_val = 0xffffffff;
+
+ otx_ep_write64(reg_val, otx_ep->hw_addr, OTX_EP_R_IN_INT_LEVELS(iq_no));
+}
+
+static void
+otx_ep_setup_oq_regs(struct otx_ep_device *otx_ep, uint32_t oq_no)
+{
+ volatile uint64_t reg_val = 0ull;
+ uint64_t oq_ctl = 0ull;
+
+ struct otx_ep_droq *droq = otx_ep->droq[oq_no];
+
+ /* Wait on IDLE to set to 1, supposed to configure BADDR
+ * as log as IDLE is 0
+ */
+ otx_ep_write64(0ULL, otx_ep->hw_addr, OTX_EP_R_OUT_ENABLE(oq_no));
+
+ reg_val = rte_read64(otx_ep->hw_addr + OTX_EP_R_OUT_CONTROL(oq_no));
+
+ while (!(reg_val & OTX_EP_R_OUT_CTL_IDLE)) {
+ reg_val = rte_read64(otx_ep->hw_addr +
+ OTX_EP_R_OUT_CONTROL(oq_no));
+ }
+
+ otx_ep_write64(droq->desc_ring_dma, otx_ep->hw_addr,
+ OTX_EP_R_OUT_SLIST_BADDR(oq_no));
+ otx_ep_write64(droq->nb_desc, otx_ep->hw_addr,
+ OTX_EP_R_OUT_SLIST_RSIZE(oq_no));
+
+ oq_ctl = rte_read64(otx_ep->hw_addr + OTX_EP_R_OUT_CONTROL(oq_no));
+
+ /* Clear the ISIZE and BSIZE (22-0) */
+ oq_ctl &= ~(0x7fffffull);
+
+ /* Populate the BSIZE (15-0) */
+ oq_ctl |= (droq->buffer_size & 0xffff);
+
+#ifndef BUFPTR_ONLY_MODE
+ oq_ctl |= ((OTX_EP_RH_SIZE << 16) & 0x7fffff);/*populate ISIZE(22-16)*/
+#endif
+ otx_ep_write64(oq_ctl, otx_ep->hw_addr, OTX_EP_R_OUT_CONTROL(oq_no));
+
+ /* Mapped address of the pkt_sent and pkts_credit regs */
+ droq->pkts_sent_reg = (uint8_t *)otx_ep->hw_addr +
+ OTX_EP_R_OUT_CNTS(oq_no);
+ droq->pkts_credit_reg = (uint8_t *)otx_ep->hw_addr +
+ OTX_EP_R_OUT_SLIST_DBELL(oq_no);
+
+ otx_ep_write64(0x3fffffffffffffULL, otx_ep->hw_addr,
+ OTX_EP_R_OUT_INT_LEVELS(oq_no));
+
+ /* Clear the OQ doorbell */
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ while ((rte_read32(droq->pkts_credit_reg) != 0ull)) {
+ rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+ rte_delay_ms(1);
+ }
+ otx_ep_dbg("OTX_EP_R[%d]_credit:%x\n", oq_no,
+ rte_read32(droq->pkts_credit_reg));
+
+ /* Clear the OQ_OUT_CNTS doorbell */
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+
+ otx_ep_dbg("OTX_EP_R[%d]_sent: %x\n", oq_no,
+ rte_read32(droq->pkts_sent_reg));
+
+ while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) {
+ reg_val = rte_read32(droq->pkts_sent_reg);
+ rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+ rte_delay_ms(1);
+ }
+}
+
/* OTX_EP default configuration */
static const struct otx_ep_config default_otx_ep_conf = {
/* IQ attributes */
@@ -148,6 +269,9 @@ otx_ep_vf_setup_device(struct otx_ep_device *otx_ep)
otx_ep_info("OTX_EP RPVF: %d\n", otx_ep->sriov_info.rings_per_vf);
+ otx_ep->fn_list.setup_iq_regs = otx_ep_setup_iq_regs;
+ otx_ep->fn_list.setup_oq_regs = otx_ep_setup_oq_regs;
+
otx_ep->fn_list.setup_device_regs = otx_ep_setup_device_regs;
return 0;
diff --git a/drivers/net/octeontx_ep/otx_ep_vf.h b/drivers/net/octeontx_ep/otx_ep_vf.h
index 42bb04f14f..50a61352a2 100644
--- a/drivers/net/octeontx_ep/otx_ep_vf.h
+++ b/drivers/net/octeontx_ep/otx_ep_vf.h
@@ -4,13 +4,38 @@
#ifndef _OTX_EP_VF_H_
#define _OTX_EP_VF_H_
+
+
+
+
#define OTX_EP_RING_OFFSET (0x1ull << 17)
/* OTX_EP VF IQ Registers */
#define OTX_EP_R_IN_CONTROL_START (0x10000)
+#define OTX_EP_R_IN_INSTR_BADDR_START (0x10020)
+#define OTX_EP_R_IN_INSTR_RSIZE_START (0x10030)
+#define OTX_EP_R_IN_INSTR_DBELL_START (0x10040)
+#define OTX_EP_R_IN_CNTS_START (0x10050)
+#define OTX_EP_R_IN_INT_LEVELS_START (0x10060)
+
#define OTX_EP_R_IN_CONTROL(ring) \
(OTX_EP_R_IN_CONTROL_START + ((ring) * OTX_EP_RING_OFFSET))
+#define OTX_EP_R_IN_INSTR_BADDR(ring) \
+ (OTX_EP_R_IN_INSTR_BADDR_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_IN_INSTR_RSIZE(ring) \
+ (OTX_EP_R_IN_INSTR_RSIZE_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_IN_INSTR_DBELL(ring) \
+ (OTX_EP_R_IN_INSTR_DBELL_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_IN_CNTS(ring) \
+ (OTX_EP_R_IN_CNTS_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_IN_INT_LEVELS(ring) \
+ (OTX_EP_R_IN_INT_LEVELS_START + ((ring) * OTX_EP_RING_OFFSET))
+
/* OTX_EP VF IQ Masks */
#define OTX_EP_R_IN_CTL_RPVF_MASK (0xF)
#define OTX_EP_R_IN_CTL_RPVF_POS (48)
@@ -20,10 +45,38 @@
#define OTX_EP_R_IN_CTL_IS_64B (0x1ull << 24)
#define OTX_EP_R_IN_CTL_ESR (0x1ull << 1)
/* OTX_EP VF OQ Registers */
+#define OTX_EP_R_OUT_CNTS_START (0x10100)
+#define OTX_EP_R_OUT_INT_LEVELS_START (0x10110)
+#define OTX_EP_R_OUT_SLIST_BADDR_START (0x10120)
+#define OTX_EP_R_OUT_SLIST_RSIZE_START (0x10130)
+#define OTX_EP_R_OUT_SLIST_DBELL_START (0x10140)
#define OTX_EP_R_OUT_CONTROL_START (0x10150)
+#define OTX_EP_R_OUT_ENABLE_START (0x10160)
+
#define OTX_EP_R_OUT_CONTROL(ring) \
(OTX_EP_R_OUT_CONTROL_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_ENABLE(ring) \
+ (OTX_EP_R_OUT_ENABLE_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_SLIST_BADDR(ring) \
+ (OTX_EP_R_OUT_SLIST_BADDR_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_SLIST_RSIZE(ring) \
+ (OTX_EP_R_OUT_SLIST_RSIZE_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_SLIST_DBELL(ring) \
+ (OTX_EP_R_OUT_SLIST_DBELL_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_CNTS(ring) \
+ (OTX_EP_R_OUT_CNTS_START + ((ring) * OTX_EP_RING_OFFSET))
+
+#define OTX_EP_R_OUT_INT_LEVELS(ring) \
+ (OTX_EP_R_OUT_INT_LEVELS_START + ((ring) * OTX_EP_RING_OFFSET))
+
/* OTX_EP VF OQ Masks */
+
+#define OTX_EP_R_OUT_CTL_IDLE (1ull << 36)
#define OTX_EP_R_OUT_CTL_ES_I (1ull << 34)
#define OTX_EP_R_OUT_CTL_NSR_I (1ull << 33)
#define OTX_EP_R_OUT_CTL_ROR_I (1ull << 32)
--
2.17.1
next prev parent reply other threads:[~2021-01-18 9:37 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-18 9:35 [dpdk-dev] [PATCH v2 01/11] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 02/11] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-19 11:55 ` Jerin Jacob
2021-01-26 15:27 ` Ferruh Yigit
2021-01-27 11:45 ` [dpdk-dev] [EXT] " Pradeep Kumar Nalla
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 03/11] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-19 12:06 ` Jerin Jacob
2021-01-26 15:25 ` Ferruh Yigit
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 04/11] net/octeontx_ep: Added basic device setup Nalla Pradeep
2021-01-19 12:09 ` Jerin Jacob
2021-01-26 15:29 ` Ferruh Yigit
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 05/11] net/octeontx_ep: Add dev info get and configure Nalla Pradeep
2021-01-26 15:31 ` Ferruh Yigit
2021-01-28 7:03 ` [dpdk-dev] [EXT] " Pradeep Kumar Nalla
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 06/11] net/octeontx_ep: Added rxq setup and release Nalla Pradeep
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 07/11] net/octeontx_ep: Added tx queue " Nalla Pradeep
2021-01-18 9:35 ` Nalla Pradeep [this message]
2021-01-26 15:32 ` [dpdk-dev] [PATCH v2 08/11] net/octeontx_ep: Setting up iq and oq registers Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 09/11] net/octeontx_ep: Added dev start and stop Nalla Pradeep
2021-01-26 15:32 ` Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 10/11] net/octeontx_ep: Receive data path function added Nalla Pradeep
2021-01-26 15:33 ` Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 11/11] net/octeontx_ep: Transmit " Nalla Pradeep
2021-01-26 15:35 ` Ferruh Yigit
2021-01-19 11:50 ` [dpdk-dev] [PATCH v2 01/11] net/octeontx_ep: add build and doc infrastructure Jerin Jacob
2021-01-26 15:09 ` Ferruh Yigit
2021-01-26 15:41 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 00/11] Octeon Tx/Tx2 Endpoint pmd Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 00/12] " Nalla Pradeep
2021-01-29 12:44 ` [dpdk-dev] [PATCH v7 " Nalla Pradeep
2021-01-29 14:08 ` Ferruh Yigit
2021-01-29 12:44 ` [dpdk-dev] [PATCH v7 01/12] raw/octeontx_ep: changed device id Nalla Pradeep
2021-02-11 0:58 ` Radha Mohan
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 02/12] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 03/12] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 04/12] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 05/12] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 06/12] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 07/12] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-29 14:04 ` Ferruh Yigit
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 08/12] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-29 14:04 ` Ferruh Yigit
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 09/12] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 10/12] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 11/12] net/octeontx_ep: receive data path function added Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 12/12] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 01/12] raw/octeontx_ep: changed device id Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 02/12] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 03/12] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 04/12] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-29 9:19 ` Ferruh Yigit
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 05/12] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 06/12] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 07/12] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 08/12] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 09/12] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 10/12] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 11/12] net/octeontx_ep: receive data path function added Nalla Pradeep
2021-01-29 9:24 ` Ferruh Yigit
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 12/12] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 01/11] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 02/11] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 03/11] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-28 16:55 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 04/11] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 05/11] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-28 16:56 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 06/11] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 07/11] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-28 16:57 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 08/11] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 09/11] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 10/11] net/octeontx_ep: receive data path function added Nalla Pradeep
2021-01-28 16:58 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 11/11] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-28 16:59 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210118093602.5449-8-pnalla@marvell.com \
--to=pnalla@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=radhac@marvell.com \
--cc=sburla@marvell.com \
--cc=vburru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).