DPDK patches and discussions
 help / color / mirror / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
To: <dev@dpdk.org>
Cc: <rasland@nvidia.com>, <matan@nvidia.com>, <shahafs@nvidia.com>,
	<orika@nvidia.com>, <getelson@nvidia.com>, <thomas@monjalon.net>
Subject: [dpdk-dev] [PATCH 1/3] ethdev: introduce configurable flexible item
Date: Wed, 22 Sep 2021 21:04:16 +0300	[thread overview]
Message-ID: <20210922180418.20663-2-viacheslavo@nvidia.com> (raw)
In-Reply-To: <20210922180418.20663-1-viacheslavo@nvidia.com>

1. Introduction and Retrospective

Nowadays the networks are evolving fast and wide, the network
structures are getting more and more complicated, the new
application areas are emerging. To address these challenges
the new network protocols are continuously being developed,
considered by technical communities, adopted by industry and,
eventually implemented in hardware and software. The DPDK
framework follows the common trends and if we bother
to glance at the RTE Flow API header we see the multiple
new items were introduced during the last years since
the initial release.

The new protocol adoption and implementation process is
not straightforward and takes time, the new protocol passes
development, consideration, adoption, and implementation
phases. The industry tries to mitigate and address the
forthcoming network protocols, for example, many hardware
vendors are implementing flexible and configurable network
protocol parsers. As DPDK developers, could we anticipate
the near future in the same fashion and introduce the similar
flexibility in RTE Flow API?

Let's check what we already have merged in our project, and
we see the nice raw item (rte_flow_item_raw). At the first
glance, it looks superior and we can try to implement a flow
matching on the header of some relatively new tunnel protocol,
say on the GENEVE header with variable length options. And,
under further consideration, we run into the raw item
limitations:

- only fixed size network header can be represented
- the entire network header pattern of fixed format
  (header field offsets are fixed) must be provided
- the search for patterns is not robust (the wrong matches
  might be triggered), and actually is not supported
  by existing PMDs
- no explicitly specified relations with preceding
  and following items
- no tunnel hint support

As the result, implementing the support for tunnel protocols
like aforementioned GENEVE with variable extra protocol option
with flow raw item becomes very complicated and would require
multiple flows and multiple raw items chained in the same
flow (by the way, there is no support found for chained raw
items in implemented drivers).

This RFC introduces the dedicated flex item (rte_flow_item_flex)
to handle matches with existing and new network protocol headers
in a unified fashion.

2. Flex Item Life Cycle

Let's assume there are the requirements to support the new
network protocol with RTE Flows. What is given within protocol
specification:

  - header format
  - header length, (can be variable, depending on options)
  - potential presence of extra options following or included
    in the header the header
  - the relations with preceding protocols. For example,
    the GENEVE follows UDP, eCPRI can follow either UDP
    or L2 header
  - the relations with following protocols. For example,
    the next layer after tunnel header can be L2 or L3
  - whether the new protocol is a tunnel and the header
    is a splitting point between outer and inner layers

The supposed way to operate with flex item:

  - application defines the header structures according to
    protocol specification

  - application calls rte_flow_flex_item_create() with desired
    configuration according to the protocol specification, it
    creates the flex item object over specified ethernet device
    and prepares PMD and underlying hardware to handle flex
    item. On item creation call PMD backing the specified
    ethernet device returns the opaque handle identifying
    the object have been created

  - application uses the rte_flow_item_flex with obtained handle
    in the flows, the values/masks to match with fields in the
    header are specified in the flex item per flow as for regular
    items (except that pattern buffer combines all fields)

  - flows with flex items match with packets in a regular fashion,
    the values and masks for the new protocol header match are
    taken from the flex items in the flows

  - application destroys flows with flex items

  - application calls rte_flow_flex_item_release() as part of
    ethernet device API and destroys the flex item object in
    PMD and releases the engaged hardware resources

3. Flex Item Structure

The flex item structure is intended to be used as part of the flow
pattern like regular RTE flow items and provides the mask and
value to match with fields of the protocol item was configured
for.

  struct rte_flow_item_flex {
    void *handle;
    uint32_t length;
    const uint8_t* pattern;
  };

The handle is some opaque object maintained on per device basis
by underlying driver.

The protocol header fields are considered as bit fields, all
offsets and widths are expressed in bits. The pattern is the
buffer containing the bit concatenation of all the fields
presented at item configuration time, in the same order and
same amount. If byte boundary alignment is needed an application
can use a dummy type field, this is just some kind of gap filler.

The length field specifies the pattern buffer length in bytes
and is needed to allow rte_flow_copy() operations. The approach
of multiple pattern pointers and lengths (per field) was
considered and found clumsy - it seems to be much suitable for
the application to maintain the single structure within the
single pattern buffer.

4. Flex Item Configuration

The flex item configuration consists of the following parts:

  - header field descriptors:
    - next header
    - next protocol
    - sample to match
  - input link descriptors
  - output link descriptors

The field descriptors tell driver and hardware what data should
be extracted from the packet and then presented to match in the
flows. Each field is a bit pattern. It has width, offset from
the header beginning, mode of offset calculation, and offset
related parameters.

The next header field is special, no data are actually taken
from the packet, but its offset is used as pointer to the next
header in the packet, in other word the next header offset
specifies the size of the header being parsed by flex item.

There is one more special field - next protocol, it specifies
where the next protocol identifier is contained and packet data
sampled from this field will be used to determine the next
protocol header type to continue packet parsing. The next
protocol field is like eth_type field in MAC2, or proto field
in IPv4/v6 headers.

The sample fields are used to represent the data be sampled
from the packet and then matched with established flows.

There are several methods supposed to calculate field offset
in runtime depending on configuration and packet content:

  - FIELD_MODE_FIXED - fixed offset. The bit offset from
    header beginning is permanent and defined by field_base
    configuration parameter.

  - FIELD_MODE_OFFSET - the field bit offset is extracted
    from other header field (indirect offset field). The
    resulting field offset to match is calculated from as:

  field_base + (*field_offset & offset_mask) << field_shift

    This mode is useful to sample some extra options following
    the main header with field containing main header length.
    Also, this mode can be used to calculate offset to the
    next protocol header, for example - IPv4 header contains
    the 4-bit field with IPv4 header length expressed in dwords.
    One more example - this mode would allow us to skip GENEVE
    header variable length options.

  - FIELD_MODE_BITMASK - the field bit offset is extracted
    from other header field (indirect offset field), the latter
    is considered as bitmask containing some number of one bits,
    the resulting field offset to match is calculated as:

  field_base + bitcount(*field_offset & offset_mask) << field_shift

    This mode would be useful to skip the GTP header and its
    extra options with specified flags.

  - FIELD_MODE_DUMMY - dummy field, optionally used for byte
    boundary alignment in pattern. Pattern mask and data are
    ignored in the match. All configuration parameters besides
    field size and offset are ignored.

The offset mode list can be extended by vendors according to
hardware supported options.

The input link configuration section tells the driver after
what protocols and at what conditions the flex item can follow.
Input link specified the preceding header pattern, for example
for GENEVE it can be UDP item specifying match on destination
port with value 6081. The flex item can follow multiple header
types and multiple input links should be specified. At flow
creation type the item with one of input link types should
precede the flex item and driver will select the correct flex
item settings, depending on actual flow pattern.

The output link configuration section tells the driver how
to continue packet parsing after the flex item protocol.
If multiple protocols can follow the flex item header the
flex item should contain the field with next protocol
identifier, and the parsing will be continued depending
on the data contained in this field in the actual packet.

The flex item fields can participate in RSS hash calculation,
the dedicated flag is present in field description to specify
what fields should be provided for hashing.

5. Flex Item Chaining

If there are multiple protocols supposed to be supported with
flex items in chained fashion - two or more flex items within
the same flow and these ones might be neighbors in pattern - it
means the flex items are mutual referencing.  In this case,
the item that occurred first should be created with empty
output link list or with the list including existing items,
and then the second flex item should be created referencing
the first flex item as input arc.

Also, the hardware resources used by flex items to handle
the packet can be limited. If there are multiple flex items
that are supposed to be used within the same flow it would
be nice to provide some hint for the driver that these two
or more flex items are intended for simultaneous usage.
The fields of items should be assigned with hint indices
and these indices from two or more flex items should not
overlap (be unique per field). For this case, the driver
will try to engage not overlapping hardware resources
and provide independent handling of the fields with unique
indices. If the hint index is zero the driver assigns
resources on its own.

6. Example of New Protocol Handling

Let's suppose we have the requirements to handle the new tunnel
protocol that follows UDP header with destination port 0xFADE
and is followed by MAC header. Let the new protocol header format
be like this:

  struct new_protocol_header {
    rte_be32 header_length; /* length in dwords, including options */
    rte_be32 specific0;     /* some protocol data, no intention */
    rte_be32 specific1;     /* to match in flows on these fields */
    rte_be32 crucial;       /* data of interest, match is needed */
    rte_be32 options[0];    /* optional protocol data, variable length */
  };

The supposed flex item configuration:

  struct rte_flow_item_flex_field field0 = {
    .field_mode = FIELD_MODE_DUMMY,  /* Affects match pattern only */
    .field_size = 96,                /* 3 dwords from the beginning */
  };
  struct rte_flow_item_flex_field field1 = {
    .field_mode = FIELD_MODE_FIXED,
    .field_size = 32,       /* Field size is one dword */
    .field_base = 96,       /* Skip three dwords from the beginning */
  };
  struct rte_flow_item_udp spec0 = {
    .hdr = {
      .dst_port = RTE_BE16(0xFADE),
    }
  };
  struct rte_flow_item_udp mask0 = {
    .hdr = {
      .dst_port = RTE_BE16(0xFFFF),
    }
  };
  struct rte_flow_item_flex_link link0 = {
    .item = {
       .type = RTE_FLOW_ITEM_TYPE_UDP,
       .spec = &spec0,
       .mask = &mask0,
  };

  struct rte_flow_item_flex_conf conf = {
    .next_header = {
      .field_mode = FIELD_MODE_OFFSET,
      .field_base = 0,
      .offset_base = 0,
      .offset_mask = 0xFFFFFFFF,
      .offset_shift = 2	   /* Expressed in dwords, shift left by 2 */
    },
    .sample = {
       &field0,
       &field1,
    },
    .sample_num = 2,
    .input_link[0] = &link0,
    .input_num = 1
  };

Let's suppose we have created the flex item successfully, and PMD
returned the handle 0x123456789A. We can use the following item
pattern to match the crucial field in the packet with value 0x00112233:

  struct new_protocol_header spec_pattern =
  {
    .crucial = RTE_BE32(0x00112233),
  };
  struct new_protocol_header mask_pattern =
  {
    .crucial = RTE_BE32(0xFFFFFFFF),
  };
  struct rte_flow_item_flex spec_flex = {
    .handle = 0x123456789A
    .length = sizeiof(struct new_protocol_header),
    .pattern = &spec_pattern,
  };
  struct rte_flow_item_flex mask_flex = {
    .length = sizeof(struct new_protocol_header),
    .pattern = &mask_pattern,
  };
  struct rte_flow_item item_to_match = {
    .type = RTE_FLOW_ITEM_TYPE_FLEX,
    .spec = &spec_flex,
    .mask = &mask_flex,
  };

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
 doc/guides/prog_guide/rte_flow.rst     |  24 +++
 doc/guides/rel_notes/release_21_11.rst |   7 +
 lib/ethdev/rte_ethdev.h                |   1 +
 lib/ethdev/rte_flow.h                  | 228 +++++++++++++++++++++++++
 4 files changed, 260 insertions(+)

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 2b42d5ec8c..628f30cea7 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1425,6 +1425,30 @@ Matches a conntrack state after conntrack action.
 - ``flags``: conntrack packet state flags.
 - Default ``mask`` matches all state bits.
 
+Item: ``FLEX``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches with the network protocol header of preliminary configured format.
+The application describes the desired header structure, defines the header
+fields attributes and header relations with preceding and following
+protocols and configures the ethernet devices accordingly via
+rte_flow_flex_item_create() routine.
+
+- ``handle``: the flex item handle returned by the PMD on successful
+  rte_flow_flex_item_create() call. The item handle is unique within
+  the device port, mask for this field is ignored.
+- ``length``: match pattern length in bytes. If the length does not cover
+  all fields defined in item configuration, the pattern spec and mask are
+  supposed to be appended with zeroes till the full configured item length.
+- ``pattern``: pattern to match. The protocol header fields are considered
+  as bit fields, all offsets and widths are expressed in bits. The pattern
+  is the buffer containing the bit concatenation of all the fields presented
+  at item configuration time, in the same order and same amount. The most
+  regular way is to define all the header fields in the flex item configuration
+  and directly use the header structure as pattern template, i.e. application
+  just can fill the header structures with desired match values and masks and
+  specify these structures as flex item pattern directly.
+
 Actions
 ~~~~~~~
 
diff --git a/doc/guides/rel_notes/release_21_11.rst b/doc/guides/rel_notes/release_21_11.rst
index 68b6405ae0..0c80ab5232 100644
--- a/doc/guides/rel_notes/release_21_11.rst
+++ b/doc/guides/rel_notes/release_21_11.rst
@@ -55,6 +55,13 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Introduced RTE Flow Flex Item.**
+
+  * The configurable RTE Flow Flex Item provides the capability to introdude
+    the arbitrary user specified network protocol header, configure the device
+    hardware accordingly, and perform match on this header with desired patterns
+    and masks.
+
 * **Enabled new devargs parser.**
 
   * Enabled devargs syntax
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index bef24173cf..9188c92d9f 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -537,6 +537,7 @@ struct rte_eth_rss_conf {
 #define ETH_RSS_PPPOE		   (1ULL << 31)
 #define ETH_RSS_ECPRI		   (1ULL << 32)
 #define ETH_RSS_MPLS		   (1ULL << 33)
+#define ETH_RSS_FLEX		   (1ULL << 34)
 
 /*
  * We use the following macros to combine with above ETH_RSS_* for
diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
index 70f455d47d..b589ec7cd0 100644
--- a/lib/ethdev/rte_flow.h
+++ b/lib/ethdev/rte_flow.h
@@ -573,6 +573,15 @@ enum rte_flow_item_type {
 	 * @see struct rte_flow_item_conntrack.
 	 */
 	RTE_FLOW_ITEM_TYPE_CONNTRACK,
+
+	/**
+	 * Matches a configured set of fields at runtime calculated offsets
+	 * over the generic network header with variable length and
+	 * flexible pattern
+	 *
+	 * @see struct rte_flow_item_flex.
+	 */
+	RTE_FLOW_ITEM_TYPE_FLEX,
 };
 
 /**
@@ -1839,6 +1848,160 @@ struct rte_flow_item {
 	const void *mask; /**< Bit-mask applied to spec and last. */
 };
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_FLEX
+ *
+ * Matches a specified set of fields within the network protocol
+ * header. Each field is presented as set of bits with specified width, and
+ * bit offset (this is dynamic one - can be calulated by several methods
+ * in runtime) from the header beginning.
+ *
+ * The pattern is concatenation of all bit fields configured at item creation
+ * by rte_flow_flex_item_create() exactly in the same order and amount, no
+ * fields can be omitted or swapped. The dummy mode field can be used for
+ * pattern byte boundary alignment, least significant bit in byte goes first.
+ * Only the fields specified in sample_data configuration parameter participate
+ * in pattern construction.
+ *
+ * If pattern length is smaller than configured fields overall length it is
+ * extended with trailing zeroes, both for value and mask.
+ *
+ * This type does not support ranges (struct rte_flow_item.last).
+ */
+struct rte_flow_item_flex {
+	struct rte_flow_item_flex_handle *handle; /**< Opaque item handle. */
+	uint32_t length; /**< Pattern length in bytes. */
+	const uint8_t *pattern; /**< Combined bitfields pattern to match. */
+};
+/**
+ * Field bit offset calculation mode.
+ */
+enum rte_flow_item_flex_field_mode {
+	/**
+	 * Dummy field, used for byte boundary alignment in pattern.
+	 * Pattern mask and data are ignored in the match. All configuration
+	 * parameters besides field size are ignored.
+	 */
+	FIELD_MODE_DUMMY = 0,
+	/**
+	 * Fixed offset field. The bit offset from header beginning is
+	 * is permanent and defined by field_base parameter.
+	 */
+	FIELD_MODE_FIXED,
+	/**
+	 * The field bit offset is extracted from other header field (indirect
+	 * offset field). The resulting field offset to match is calculated as:
+	 *
+	 *    field_base + (*field_offset & offset_mask) << field_shift
+	 */
+	FIELD_MODE_OFFSET,
+	/**
+	 * The field bit offset is extracted from other header field (indirect
+	 * offset field), the latter is considered as bitmask containing some
+	 * number of one bits, the resulting field offset to match is
+	 * calculated as:
+	 *
+	 *    field_base + bitcount(*field_offset & offset_mask) << field_shift
+	 */
+	FIELD_MODE_BITMASK,
+};
+
+/**
+ * Flex item field tunnel mode
+ */
+enum rte_flow_item_flex_tunnel_mode {
+	FLEX_TUNNEL_MODE_FIRST = 0, /**< First item occurrence. */
+	FLEX_TUNNEL_MODE_OUTER = 1, /**< Outer item. */
+	FLEX_TUNNEL_MODE_INNER = 2  /**< Inner item. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+__extension__
+struct rte_flow_item_flex_field {
+	/** Defines how match field offset is calculated over the packet. */
+	enum rte_flow_item_flex_field_mode field_mode;
+	uint32_t field_size; /**< Match field size in bits. */
+	int32_t field_base; /**< Match field offset in bits. */
+	uint32_t offset_base; /**< Indirect offset field offset in bits. */
+	uint32_t offset_mask; /**< Indirect offset field bit mask. */
+	int32_t offset_shift; /**< Indirect offset multiply factor. */
+	uint16_t tunnel_count:2; /**< 0-first occurrence, 1-outer, 2-inner.*/
+	uint16_t rss_hash:1; /**< Field participates in RSS hash calculation. */
+	uint16_t field_id; /**< device hint, for flows with multiple items. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+struct rte_flow_item_flex_link {
+	/**
+	 * Preceding/following header. The item type must be always provided.
+	 * For preceding one item must specify the header value/mask to match
+	 * for the link be taken and start the flex item header parsing.
+	 */
+	struct rte_flow_item item;
+	/**
+	 * Next field value to match to continue with one of the configured
+	 * next protocols.
+	 */
+	uint32_t next;
+	/**
+	 * Specifies whether flex item represents tunnel protocol
+	 */
+	bool tunnel;
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ */
+struct rte_flow_item_flex_conf {
+	/**
+	 * The next header offset, it presents the network header size covered
+	 * by the flex item and can be obtained with all supported offset
+	 * calculating methods (fixed, dedicated field, bitmask, etc).
+	 */
+	struct rte_flow_item_flex_field next_header;
+	/**
+	 * Specifies the next protocol field to match with link next protocol
+	 * values and continue packet parsing with matching link.
+	 */
+	struct rte_flow_item_flex_field next_protocol;
+	/**
+	 * The fields will be sampled and presented for explicit match
+	 * with pattern in the rte_flow_flex_item. There can be multiple
+	 * fields descriptors, the number should be specified by sample_num.
+	 */
+	struct rte_flow_item_flex_field *sample_data;
+	/** Number of field descriptors in the sample_data array. */
+	uint32_t sample_num;
+	/**
+	 * Input link defines the flex item relation with preceding
+	 * header. It specified the preceding item type and provides pattern
+	 * to match. The flex item will continue parsing and will provide the
+	 * data to flow match in case if there is the match with one of input
+	 * links.
+	 */
+	struct rte_flow_item_flex_link *input_link;
+	/** Number of link descriptors in the input link array. */
+	uint32_t input_num;
+	/**
+	 * Output link defines the next protocol field value to match and
+	 * the following protocol header to continue packet parsing. Also
+	 * defines the tunnel-related behaviour.
+	 */
+	struct rte_flow_item_flex_link *output_link;
+	/** Number of link descriptors in the output link array. */
+	uint32_t output_num;
+};
+
 /**
  * Action types.
  *
@@ -4288,6 +4451,71 @@ rte_flow_tunnel_item_release(uint16_t port_id,
 			     struct rte_flow_item *items,
 			     uint32_t num_of_items,
 			     struct rte_flow_error *error);
+
+/**
+ * Create the flex item with specified configuration over
+ * the Ethernet device.
+ *
+ * @param port_id
+ *   Port identifier of Ethernet device.
+ * @param[in] conf
+ *   Item configuration.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL. PMDs initialize this
+ *   structure in case of error only.
+ *
+ * @return
+ *   Non-NULL opaque pointer on success, NULL otherwise and rte_errno is set.
+ */
+__rte_experimental
+struct rte_flow_item_flex_handle *
+rte_flow_flex_item_create(uint16_t port_id,
+			  const struct rte_flow_item_flex_conf *conf,
+			  struct rte_flow_error *error);
+
+/**
+ * Release the flex item on the specified Ethernet device.
+ *
+ * @param port_id
+ *   Port identifier of Ethernet device.
+ * @param[in] handle
+ *   Handle of the item existing on the specified device.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL. PMDs initialize this
+ *   structure in case of error only.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_flex_item_release(uint16_t port_id,
+			   const struct rte_flow_item_flex_handle *handle,
+			   struct rte_flow_error *error);
+
+/**
+ * Modify the flex item on the specified Ethernet device.
+ *
+ * @param port_id
+ *   Port identifier of Ethernet device.
+ * @param[in] handle
+ *   Handle of the item existing on the specified device.
+ * @param[in] conf
+ *   Item new configuration.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL. PMDs initialize this
+ *   structure in case of error only.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+__rte_experimental
+int
+rte_flow_flex_item_update(uint16_t port_id,
+			  const struct rte_flow_item_flex_handle *handle,
+			  const struct rte_flow_item_flex_conf *conf,
+			  struct rte_flow_error *error);
+
 #ifdef __cplusplus
 }
 #endif
-- 
2.18.1


  reply	other threads:[~2021-09-22 18:04 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-22 18:04 [dpdk-dev] [PATCH 0/3] " Viacheslav Ovsiienko
2021-09-22 18:04 ` Viacheslav Ovsiienko [this message]
2021-09-22 18:04 ` [dpdk-dev] [PATCH 2/3] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-09-22 18:04 ` [dpdk-dev] [PATCH 3/3] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-01 19:34 ` [dpdk-dev] [PATCH v2 00/14] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 01/14] " Viacheslav Ovsiienko
2021-10-07 11:08     ` Ori Kam
2021-10-12  6:42       ` Slava Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 02/14] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 03/14] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 04/14] app/testpmd: add jansson library Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 05/14] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 06/14] common/mlx5: refactor HCA attributes query Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 07/14] common/mlx5: extend flex parser capabilities Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 08/14] common/mlx5: fix flex parser DevX creation routine Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 09/14] net/mlx5: update eCPRI flex parser structures Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 10/14] net/mlx5: add flex item API Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 11/14] net/mlx5: add flex parser DevX object management Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 12/14] net/mlx5: translate flex item configuration Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 13/14] net/mlx5: translate flex item pattern into matcher Viacheslav Ovsiienko
2021-10-01 19:34   ` [dpdk-dev] [PATCH v2 14/14] net/mlx5: handle flex item in flows Viacheslav Ovsiienko
2021-10-11 18:15 ` [dpdk-dev] [PATCH v3 0/5] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-11 18:15   ` [dpdk-dev] [PATCH v3 1/5] " Viacheslav Ovsiienko
2021-10-12  6:41     ` Ori Kam
2021-10-11 18:15   ` [dpdk-dev] [PATCH v3 2/5] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-12  7:53     ` Ori Kam
2021-10-11 18:15   ` [dpdk-dev] [PATCH v3 3/5] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-11 18:15   ` [dpdk-dev] [PATCH v3 4/5] app/testpmd: add jansson library Viacheslav Ovsiienko
2021-10-12  7:56     ` Ori Kam
2021-10-11 18:15   ` [dpdk-dev] [PATCH v3 5/5] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-12 10:49 ` [dpdk-dev] [PATCH v4 0/5] ethdev: update modify field flow action Viacheslav Ovsiienko
2021-10-12 10:49   ` [dpdk-dev] [PATCH v4 1/5] " Viacheslav Ovsiienko
2021-10-12 10:49   ` [dpdk-dev] [PATCH v4 2/5] ethdev: fix missed experimental tag for modify field action Viacheslav Ovsiienko
2021-10-12 10:49   ` [dpdk-dev] [PATCH v4 3/5] app/testpmd: update modify field flow action support Viacheslav Ovsiienko
2021-10-12 10:49   ` [dpdk-dev] [PATCH v4 4/5] app/testpmd: fix hex string parser in flow commands Viacheslav Ovsiienko
2021-10-12 10:49   ` [dpdk-dev] [PATCH v4 5/5] net/mlx5: update modify field action Viacheslav Ovsiienko
2021-10-12 11:32 ` [dpdk-dev] [PATCH v4 0/5] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-12 11:32   ` [dpdk-dev] [PATCH v4 1/5] " Viacheslav Ovsiienko
2021-10-12 11:42     ` Ori Kam
2021-10-12 11:32   ` [dpdk-dev] [PATCH v4 2/5] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-12 11:32   ` [dpdk-dev] [PATCH v4 3/5] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-12 11:32   ` [dpdk-dev] [PATCH v4 4/5] app/testpmd: add jansson library Viacheslav Ovsiienko
2021-10-12 11:32   ` [dpdk-dev] [PATCH v4 5/5] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-12 12:54 ` [dpdk-dev] [PATCH v5 0/5] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-12 12:54   ` [dpdk-dev] [PATCH v5 1/5] " Viacheslav Ovsiienko
2021-10-12 12:54   ` [dpdk-dev] [PATCH v5 2/5] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-12 12:54   ` [dpdk-dev] [PATCH v5 3/5] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-12 14:39     ` Ori Kam
2021-10-12 12:54   ` [dpdk-dev] [PATCH v5 4/5] app/testpmd: add jansson library Viacheslav Ovsiienko
2021-10-12 12:54   ` [dpdk-dev] [PATCH v5 5/5] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-14 16:42     ` Ferruh Yigit
2021-10-14 18:13       ` Gregory Etelson
2021-10-14 16:09   ` [dpdk-dev] [PATCH v5 0/5] ethdev: introduce configurable flexible item Ferruh Yigit
2021-10-14 18:55     ` Slava Ovsiienko
2021-10-18 18:02 ` [dpdk-dev] [PATCH v6 0/6] " Viacheslav Ovsiienko
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 1/6] " Viacheslav Ovsiienko
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 2/6] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 3/6] ethdev: implement RTE flex item API Viacheslav Ovsiienko
2021-10-19  6:12     ` Ori Kam
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 4/6] app/testpmd: add jansson library Viacheslav Ovsiienko
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 5/6] app/testpmd: add dedicated flow command parsing routine Viacheslav Ovsiienko
2021-10-18 18:02   ` [dpdk-dev] [PATCH v6 6/6] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-20 15:06 ` [dpdk-dev] [PATCH v7 0/4] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-20 15:06   ` [dpdk-dev] [PATCH v7 1/4] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-20 15:06   ` [dpdk-dev] [PATCH v7 2/4] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-20 15:06   ` [dpdk-dev] [PATCH v7 3/4] app/testpmd: add dedicated flow command parsing routine Viacheslav Ovsiienko
2021-10-20 15:06   ` [dpdk-dev] [PATCH v7 4/4] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-20 15:14 ` [dpdk-dev] [PATCH v8 0/4] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-20 15:14   ` [dpdk-dev] [PATCH v8 1/4] ethdev: support flow elements with variable length Viacheslav Ovsiienko
2021-10-20 15:14   ` [dpdk-dev] [PATCH v8 2/4] ethdev: introduce configurable flexible item Viacheslav Ovsiienko
2021-10-20 15:14   ` [dpdk-dev] [PATCH v8 3/4] app/testpmd: add dedicated flow command parsing routine Viacheslav Ovsiienko
2021-10-20 15:14   ` [dpdk-dev] [PATCH v8 4/4] app/testpmd: add flex item CLI commands Viacheslav Ovsiienko
2021-10-20 17:05   ` [dpdk-dev] [PATCH v8 0/4] ethdev: introduce configurable flexible item Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210922180418.20663-2-viacheslavo@nvidia.com \
    --to=viacheslavo@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=getelson@nvidia.com \
    --cc=matan@nvidia.com \
    --cc=orika@nvidia.com \
    --cc=rasland@nvidia.com \
    --cc=shahafs@nvidia.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).