DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Xiaoyun Li <xiaoyun.li@intel.com>, Chas Williams <chas3@att.com>,
	"Min Hu (Connor)" <humin29@huawei.com>,
	Hemant Agrawal <hemant.agrawal@nxp.com>,
	Sachin Saxena <sachin.saxena@oss.nxp.com>,
	Qi Zhang <qi.z.zhang@intel.com>,
	Xiao Wang <xiao.w.wang@intel.com>, Matan Azrad <matan@nvidia.com>,
	Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
	Harman Kalra <hkalra@marvell.com>,
	Maciej Czekaj <mczekaj@marvell.com>, Ray Kinsella <mdr@ashroe.eu>,
	Bernard Iremonger <bernard.iremonger@intel.com>,
	Konstantin Ananyev <konstantin.ananyev@intel.com>,
	Kiran Kumar K <kirankumark@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	David Hunt <david.hunt@intel.com>,
	John McNamara <john.mcnamara@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Igor Russkikh <irusskikh@marvell.com>,
	Steven Webster <steven.webster@windriver.com>,
	Matt Peters <matt.peters@windriver.com>,
	Somalapuram Amaranath <asomalap@amd.com>,
	Rasesh Mody <rmody@marvell.com>,
	Shahed Shaikh <shshaikh@marvell.com>,
	Ajit Khaparde <ajit.khaparde@broadcom.com>,
	Somnath Kotur <somnath.kotur@broadcom.com>,
	Sunil Kumar Kori <skori@marvell.com>,
	Satha Rao <skoteshwar@marvell.com>,
	Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>,
	Haiyue Wang <haiyue.wang@intel.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Michal Krawczyk <mk@semihalf.com>,
	Shai Brandes <shaibran@amazon.com>,
	Evgeny Schemeilin <evgenys@amazon.com>,
	Igor Chauskin <igorch@amazon.com>,
	Gagandeep Singh <g.singh@nxp.com>,
	John Daley <johndale@cisco.com>,
	Hyong Youb Kim <hyonkim@cisco.com>,
	Ziyang Xuan <xuanziyang2@huawei.com>,
	Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>,
	Guoyang Zhou <zhouguoyang@huawei.com>,
	Yisen Zhuang <yisen.zhuang@huawei.com>,
	Lijun Ou <oulijun@huawei.com>,
	Beilei Xing <beilei.xing@intel.com>,
	Jingjing Wu <jingjing.wu@intel.com>,
	Qiming Yang <qiming.yang@intel.com>,
	Andrew Boyer <aboyer@pensando.io>, Rosen Xu <rosen.xu@intel.com>,
	Shijith Thotton <sthotton@marvell.com>,
	Srisivasubramanian Srinivasan <srinivasan@marvell.com>,
	Zyta Szpak <zr@semihalf.com>, Liron Himi <lironh@marvell.com>,
	Heinrich Kuhn <heinrich.kuhn@corigine.com>,
	Devendra Singh Rawat <dsinghrawat@marvell.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
	Keith Wiles <keith.wiles@intel.com>,
	Jiawen Wu <jiawenwu@trustnetic.com>,
	Jian Wang <jianwang@trustnetic.com>,
	Maxime Coquelin <maxime.coquelin@redhat.com>,
	Chenbo Xia <chenbo.xia@intel.com>,
	Nicolas Chautru <nicolas.chautru@intel.com>,
	Harry van Haaren <harry.van.haaren@intel.com>,
	Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Akhil Goyal <gakhil@marvell.com>,
	Tomasz Kantecki <tomasz.kantecki@intel.com>,
	Declan Doherty <declan.doherty@intel.com>,
	Pavan Nikhilesh <pbhagavatula@marvell.com>,
	Kirill Rybalchenko <kirill.rybalchenko@intel.com>,
	Jasvinder Singh <jasvinder.singh@intel.com>,
	Thomas Monjalon <thomas@monjalon.net>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
	dev@dpdk.org, Huisong Li <lihuisong@huawei.com>
Subject: [dpdk-dev] [PATCH v6 1/6] ethdev: fix max Rx packet length
Date: Tue, 12 Oct 2021 00:53:39 +0100	[thread overview]
Message-ID: <20211011235345.851742-1-ferruh.yigit@intel.com> (raw)
In-Reply-To: <20211001143624.3744505-1-ferruh.yigit@intel.com>

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
  'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
  Ethernet frame overhead, and this overhead may be different from
  device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
  which adds additional confusion and some APIs and PMDs already
  discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
  field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
---
Cc: Min Hu (Connor) <humin29@huawei.com>

v2:
* Converted to explicit checks for zero/non-zero
* fixed hns3 checks
* fixed some sample app rxmode.mtu value
* fixed some sample app max-pkt-len argument and updated doc for it

v3:
* rebased

v4:
* fix typos in commit logs

v5:
* fix testpmd '--max-pkt-len=###' parameter for DTS jumbo frame test

v6:
* uint32_t type used in 'eth_dev_get_overhead_len()' helper function
---
 app/test-eventdev/test_perf_common.c          |   1 -
 app/test-eventdev/test_pipeline_common.c      |   5 +-
 app/test-pmd/cmdline.c                        |  49 +++----
 app/test-pmd/config.c                         |  22 ++-
 app/test-pmd/parameters.c                     |   2 +-
 app/test-pmd/testpmd.c                        | 113 +++++++++------
 app/test-pmd/testpmd.h                        |   4 +-
 app/test/test_link_bonding.c                  |   1 -
 app/test/test_link_bonding_mode4.c            |   1 -
 app/test/test_link_bonding_rssconf.c          |   2 -
 app/test/test_pmd_perf.c                      |   1 -
 doc/guides/nics/dpaa.rst                      |   2 +-
 doc/guides/nics/dpaa2.rst                     |   2 +-
 doc/guides/nics/features.rst                  |   2 +-
 doc/guides/nics/fm10k.rst                     |   2 +-
 doc/guides/nics/mlx5.rst                      |   4 +-
 doc/guides/nics/octeontx.rst                  |   2 +-
 doc/guides/nics/thunderx.rst                  |   2 +-
 doc/guides/rel_notes/deprecation.rst          |  25 ----
 doc/guides/sample_app_ug/flow_classify.rst    |   7 +-
 doc/guides/sample_app_ug/l3_forward.rst       |   6 +-
 .../sample_app_ug/l3_forward_access_ctrl.rst  |   4 +-
 doc/guides/sample_app_ug/l3_forward_graph.rst |   6 +-
 .../sample_app_ug/l3_forward_power_man.rst    |   4 +-
 .../sample_app_ug/performance_thread.rst      |   4 +-
 doc/guides/sample_app_ug/skeleton.rst         |   7 +-
 drivers/net/atlantic/atl_ethdev.c             |   3 -
 drivers/net/avp/avp_ethdev.c                  |  17 +--
 drivers/net/axgbe/axgbe_ethdev.c              |   7 +-
 drivers/net/bnx2x/bnx2x_ethdev.c              |   6 +-
 drivers/net/bnxt/bnxt_ethdev.c                |  21 +--
 drivers/net/bonding/rte_eth_bond_pmd.c        |   4 +-
 drivers/net/cnxk/cnxk_ethdev.c                |   9 +-
 drivers/net/cnxk/cnxk_ethdev_ops.c            |   8 +-
 drivers/net/cxgbe/cxgbe_ethdev.c              |  12 +-
 drivers/net/cxgbe/cxgbe_main.c                |   3 +-
 drivers/net/cxgbe/sge.c                       |   3 +-
 drivers/net/dpaa/dpaa_ethdev.c                |  52 +++----
 drivers/net/dpaa2/dpaa2_ethdev.c              |  35 ++---
 drivers/net/e1000/em_ethdev.c                 |   4 +-
 drivers/net/e1000/igb_ethdev.c                |  18 +--
 drivers/net/e1000/igb_rxtx.c                  |  16 +--
 drivers/net/ena/ena_ethdev.c                  |  27 ++--
 drivers/net/enetc/enetc_ethdev.c              |  24 +---
 drivers/net/enic/enic_ethdev.c                |   2 +-
 drivers/net/enic/enic_main.c                  |  42 +++---
 drivers/net/fm10k/fm10k_ethdev.c              |   2 +-
 drivers/net/hinic/hinic_pmd_ethdev.c          |  20 ++-
 drivers/net/hns3/hns3_ethdev.c                |  42 +-----
 drivers/net/hns3/hns3_ethdev_vf.c             |  28 +---
 drivers/net/hns3/hns3_rxtx.c                  |  10 +-
 drivers/net/i40e/i40e_ethdev.c                |  10 +-
 drivers/net/i40e/i40e_rxtx.c                  |   4 +-
 drivers/net/iavf/iavf_ethdev.c                |   9 +-
 drivers/net/ice/ice_dcf_ethdev.c              |   5 +-
 drivers/net/ice/ice_ethdev.c                  |  14 +-
 drivers/net/ice/ice_rxtx.c                    |  12 +-
 drivers/net/igc/igc_ethdev.c                  |  51 ++-----
 drivers/net/igc/igc_ethdev.h                  |   7 +
 drivers/net/igc/igc_txrx.c                    |  22 +--
 drivers/net/ionic/ionic_ethdev.c              |  12 +-
 drivers/net/ionic/ionic_rxtx.c                |   6 +-
 drivers/net/ipn3ke/ipn3ke_representor.c       |  10 +-
 drivers/net/ixgbe/ixgbe_ethdev.c              |  35 ++---
 drivers/net/ixgbe/ixgbe_pf.c                  |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx.c                |  15 +-
 drivers/net/liquidio/lio_ethdev.c             |  20 +--
 drivers/net/mlx4/mlx4_rxq.c                   |  17 +--
 drivers/net/mlx5/mlx5_rxq.c                   |  25 ++--
 drivers/net/mvneta/mvneta_ethdev.c            |   7 -
 drivers/net/mvneta/mvneta_rxtx.c              |  13 +-
 drivers/net/mvpp2/mrvl_ethdev.c               |  34 ++---
 drivers/net/nfp/nfp_common.c                  |   9 +-
 drivers/net/octeontx/octeontx_ethdev.c        |  12 +-
 drivers/net/octeontx2/otx2_ethdev.c           |   2 +-
 drivers/net/octeontx2/otx2_ethdev_ops.c       |  11 +-
 drivers/net/pfe/pfe_ethdev.c                  |   7 +-
 drivers/net/qede/qede_ethdev.c                |  16 +--
 drivers/net/qede/qede_rxtx.c                  |   8 +-
 drivers/net/sfc/sfc_ethdev.c                  |   4 +-
 drivers/net/sfc/sfc_port.c                    |   6 +-
 drivers/net/tap/rte_eth_tap.c                 |   7 +-
 drivers/net/thunderx/nicvf_ethdev.c           |  13 +-
 drivers/net/txgbe/txgbe_ethdev.c              |   7 +-
 drivers/net/txgbe/txgbe_ethdev.h              |   4 +
 drivers/net/txgbe/txgbe_ethdev_vf.c           |   2 -
 drivers/net/txgbe/txgbe_rxtx.c                |  19 +--
 drivers/net/virtio/virtio_ethdev.c            |   9 +-
 examples/bbdev_app/main.c                     |   1 -
 examples/bond/main.c                          |   1 -
 examples/distributor/main.c                   |   1 -
 .../pipeline_worker_generic.c                 |   1 -
 .../eventdev_pipeline/pipeline_worker_tx.c    |   1 -
 examples/flow_classify/flow_classify.c        |  12 +-
 examples/ioat/ioatfwd.c                       |   1 -
 examples/ip_fragmentation/main.c              |  12 +-
 examples/ip_pipeline/link.c                   |   2 +-
 examples/ip_reassembly/main.c                 |  12 +-
 examples/ipsec-secgw/ipsec-secgw.c            |   7 +-
 examples/ipv4_multicast/main.c                |   9 +-
 examples/kni/main.c                           |   6 +-
 examples/l2fwd-cat/l2fwd-cat.c                |   8 +-
 examples/l2fwd-crypto/main.c                  |   1 -
 examples/l2fwd-event/l2fwd_common.c           |   1 -
 examples/l3fwd-acl/main.c                     | 129 +++++++++---------
 examples/l3fwd-graph/main.c                   |  83 +++++++----
 examples/l3fwd-power/main.c                   |  90 +++++++-----
 examples/l3fwd/main.c                         |  84 +++++++-----
 .../performance-thread/l3fwd-thread/main.c    |  88 +++++++-----
 .../performance-thread/l3fwd-thread/test.sh   |  24 ++--
 examples/pipeline/obj.c                       |   2 +-
 examples/ptpclient/ptpclient.c                |  10 +-
 examples/qos_meter/main.c                     |   1 -
 examples/qos_sched/init.c                     |   1 -
 examples/rxtx_callbacks/main.c                |  10 +-
 examples/skeleton/basicfwd.c                  |  12 +-
 examples/vhost/main.c                         |   4 +-
 examples/vm_power_manager/main.c              |  11 +-
 lib/ethdev/rte_ethdev.c                       |  94 +++++++------
 lib/ethdev/rte_ethdev.h                       |   2 +-
 lib/ethdev/rte_ethdev_trace.h                 |   2 +-
 121 files changed, 814 insertions(+), 1074 deletions(-)

diff --git a/app/test-eventdev/test_perf_common.c b/app/test-eventdev/test_perf_common.c
index cc100650c21e..660d5a0364b6 100644
--- a/app/test-eventdev/test_perf_common.c
+++ b/app/test-eventdev/test_perf_common.c
@@ -669,7 +669,6 @@ perf_ethdev_setup(struct evt_test *test, struct evt_options *opt)
 	struct rte_eth_conf port_conf = {
 		.rxmode = {
 			.mq_mode = ETH_MQ_RX_RSS,
-			.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 			.split_hdr_size = 0,
 		},
 		.rx_adv_conf = {
diff --git a/app/test-eventdev/test_pipeline_common.c b/app/test-eventdev/test_pipeline_common.c
index 6ee530d4cdc9..5fcea74b4d43 100644
--- a/app/test-eventdev/test_pipeline_common.c
+++ b/app/test-eventdev/test_pipeline_common.c
@@ -197,8 +197,9 @@ pipeline_ethdev_setup(struct evt_test *test, struct evt_options *opt)
 		return -EINVAL;
 	}
 
-	port_conf.rxmode.max_rx_pkt_len = opt->max_pkt_sz;
-	if (opt->max_pkt_sz > RTE_ETHER_MAX_LEN)
+	port_conf.rxmode.mtu = opt->max_pkt_sz - RTE_ETHER_HDR_LEN -
+		RTE_ETHER_CRC_LEN;
+	if (port_conf.rxmode.mtu > RTE_ETHER_MTU)
 		port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 
 	t->internal_port = 1;
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 826256b0b346..8d07cd4eb61d 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1874,45 +1874,38 @@ cmd_config_max_pkt_len_parsed(void *parsed_result,
 				__rte_unused void *data)
 {
 	struct cmd_config_max_pkt_len_result *res = parsed_result;
-	uint32_t max_rx_pkt_len_backup = 0;
-	portid_t pid;
+	portid_t port_id;
 	int ret;
 
+	if (strcmp(res->name, "max-pkt-len") != 0) {
+		printf("Unknown parameter\n");
+		return;
+	}
+
 	if (!all_ports_stopped()) {
 		fprintf(stderr, "Please stop all ports first\n");
 		return;
 	}
 
-	RTE_ETH_FOREACH_DEV(pid) {
-		struct rte_port *port = &ports[pid];
+	RTE_ETH_FOREACH_DEV(port_id) {
+		struct rte_port *port = &ports[port_id];
 
-		if (!strcmp(res->name, "max-pkt-len")) {
-			if (res->value < RTE_ETHER_MIN_LEN) {
-				fprintf(stderr,
-					"max-pkt-len can not be less than %d\n",
-					RTE_ETHER_MIN_LEN);
-				return;
-			}
-			if (res->value == port->dev_conf.rxmode.max_rx_pkt_len)
-				return;
-
-			ret = eth_dev_info_get_print_err(pid, &port->dev_info);
-			if (ret != 0) {
-				fprintf(stderr,
-					"rte_eth_dev_info_get() failed for port %u\n",
-					pid);
-				return;
-			}
-
-			max_rx_pkt_len_backup = port->dev_conf.rxmode.max_rx_pkt_len;
+		if (res->value < RTE_ETHER_MIN_LEN) {
+			fprintf(stderr,
+				"max-pkt-len can not be less than %d\n",
+				RTE_ETHER_MIN_LEN);
+			return;
+		}
 
-			port->dev_conf.rxmode.max_rx_pkt_len = res->value;
-			if (update_jumbo_frame_offload(pid) != 0)
-				port->dev_conf.rxmode.max_rx_pkt_len = max_rx_pkt_len_backup;
-		} else {
-			fprintf(stderr, "Unknown parameter\n");
+		ret = eth_dev_info_get_print_err(port_id, &port->dev_info);
+		if (ret != 0) {
+			fprintf(stderr,
+				"rte_eth_dev_info_get() failed for port %u\n",
+				port_id);
 			return;
 		}
+
+		update_jumbo_frame_offload(port_id, res->value);
 	}
 
 	init_port_config();
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 9c66329e96ee..db3eeffa0093 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1147,7 +1147,6 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
 	int diag;
 	struct rte_port *rte_port = &ports[port_id];
 	struct rte_eth_dev_info dev_info;
-	uint16_t eth_overhead;
 	int ret;
 
 	if (port_id_is_invalid(port_id, ENABLED_WARN))
@@ -1164,21 +1163,18 @@ port_mtu_set(portid_t port_id, uint16_t mtu)
 		return;
 	}
 	diag = rte_eth_dev_set_mtu(port_id, mtu);
-	if (diag)
+	if (diag != 0) {
 		fprintf(stderr, "Set MTU failed. diag=%d\n", diag);
-	else if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		/*
-		 * Ether overhead in driver is equal to the difference of
-		 * max_rx_pktlen and max_mtu in rte_eth_dev_info when the
-		 * device supports jumbo frame.
-		 */
-		eth_overhead = dev_info.max_rx_pktlen - dev_info.max_mtu;
-		if (mtu > RTE_ETHER_MTU) {
+		return;
+	}
+
+	rte_port->dev_conf.rxmode.mtu = mtu;
+
+	if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+		if (mtu > RTE_ETHER_MTU)
 			rte_port->dev_conf.rxmode.offloads |=
 						DEV_RX_OFFLOAD_JUMBO_FRAME;
-			rte_port->dev_conf.rxmode.max_rx_pkt_len =
-						mtu + eth_overhead;
-		} else
+		else
 			rte_port->dev_conf.rxmode.offloads &=
 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
 	}
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 3f94a82e321f..dec5373b346d 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -870,7 +870,7 @@ launch_args_parse(int argc, char** argv)
 			if (!strcmp(lgopts[opt_idx].name, "max-pkt-len")) {
 				n = atoi(optarg);
 				if (n >= RTE_ETHER_MIN_LEN)
-					rx_mode.max_rx_pkt_len = (uint32_t) n;
+					max_rx_pkt_len = n;
 				else
 					rte_exit(EXIT_FAILURE,
 						 "Invalid max-pkt-len=%d - should be > %d\n",
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 97ae52e17ecd..606c3b7e702b 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -214,6 +214,11 @@ uint16_t stats_period; /**< Period to show statistics (disabled by default) */
  */
 uint8_t f_quit;
 
+/*
+ * Max Rx frame size, set by '--max-pkt-len' parameter.
+ */
+uint32_t max_rx_pkt_len;
+
 /*
  * Configuration of packet segments used to scatter received packets
  * if some of split features is configured.
@@ -446,13 +451,7 @@ lcoreid_t latencystats_lcore_id = -1;
 /*
  * Ethernet device configuration.
  */
-struct rte_eth_rxmode rx_mode = {
-	/* Default maximum frame length.
-	 * Zero is converted to "RTE_ETHER_MTU + PMD Ethernet overhead"
-	 * in init_config().
-	 */
-	.max_rx_pkt_len = 0,
-};
+struct rte_eth_rxmode rx_mode;
 
 struct rte_eth_txmode tx_mode = {
 	.offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
@@ -1481,11 +1480,24 @@ check_nb_hairpinq(queueid_t hairpinq)
 	return 0;
 }
 
+static int
+get_eth_overhead(struct rte_eth_dev_info *dev_info)
+{
+	uint32_t eth_overhead;
+
+	if (dev_info->max_mtu != UINT16_MAX &&
+	    dev_info->max_rx_pktlen > dev_info->max_mtu)
+		eth_overhead = dev_info->max_rx_pktlen - dev_info->max_mtu;
+	else
+		eth_overhead = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return eth_overhead;
+}
+
 static void
 init_config_port_offloads(portid_t pid, uint32_t socket_id)
 {
 	struct rte_port *port = &ports[pid];
-	uint16_t data_size;
 	int ret;
 	int i;
 
@@ -1496,7 +1508,7 @@ init_config_port_offloads(portid_t pid, uint32_t socket_id)
 	if (ret != 0)
 		rte_exit(EXIT_FAILURE, "rte_eth_dev_info_get() failed\n");
 
-	ret = update_jumbo_frame_offload(pid);
+	ret = update_jumbo_frame_offload(pid, 0);
 	if (ret != 0)
 		fprintf(stderr,
 			"Updating jumbo frame offload failed for port %u\n",
@@ -1516,6 +1528,10 @@ init_config_port_offloads(portid_t pid, uint32_t socket_id)
 	if (eth_link_speed)
 		port->dev_conf.link_speeds = eth_link_speed;
 
+	if (max_rx_pkt_len)
+		port->dev_conf.rxmode.mtu = max_rx_pkt_len -
+			get_eth_overhead(&port->dev_info);
+
 	/* set flag to initialize port/queue */
 	port->need_reconfig = 1;
 	port->need_reconfig_queues = 1;
@@ -1528,14 +1544,20 @@ init_config_port_offloads(portid_t pid, uint32_t socket_id)
 	 */
 	if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX &&
 	    port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) {
-		data_size = rx_mode.max_rx_pkt_len /
-			port->dev_info.rx_desc_lim.nb_mtu_seg_max;
-
-		if ((data_size + RTE_PKTMBUF_HEADROOM) > mbuf_data_size[0]) {
-			mbuf_data_size[0] = data_size + RTE_PKTMBUF_HEADROOM;
-			TESTPMD_LOG(WARNING,
-				    "Configured mbuf size of the first segment %hu\n",
-				    mbuf_data_size[0]);
+		uint32_t eth_overhead = get_eth_overhead(&port->dev_info);
+		uint16_t mtu;
+
+		if (rte_eth_dev_get_mtu(pid, &mtu) == 0) {
+			uint16_t data_size = (mtu + eth_overhead) /
+				port->dev_info.rx_desc_lim.nb_mtu_seg_max;
+			uint16_t buffer_size = data_size + RTE_PKTMBUF_HEADROOM;
+
+			if (buffer_size > mbuf_data_size[0]) {
+				mbuf_data_size[0] = buffer_size;
+				TESTPMD_LOG(WARNING,
+					"Configured mbuf size of the first segment %hu\n",
+					mbuf_data_size[0]);
+			}
 		}
 	}
 }
@@ -2552,6 +2574,7 @@ start_port(portid_t pid)
 					pi);
 				return -1;
 			}
+
 			/* configure port */
 			diag = eth_dev_configure_mp(pi, nb_rxq + nb_hairpinq,
 						     nb_txq + nb_hairpinq,
@@ -3451,44 +3474,45 @@ rxtx_port_config(struct rte_port *port)
 
 /*
  * Helper function to arrange max_rx_pktlen value and JUMBO_FRAME offload,
- * MTU is also aligned if JUMBO_FRAME offload is not set.
+ * MTU is also aligned.
  *
  * port->dev_info should be set before calling this function.
  *
+ * if 'max_rx_pktlen' is zero, it is set to current device value, "MTU +
+ * ETH_OVERHEAD". This is useful to update flags but not MTU value.
+ *
  * return 0 on success, negative on error
  */
 int
-update_jumbo_frame_offload(portid_t portid)
+update_jumbo_frame_offload(portid_t portid, uint32_t max_rx_pktlen)
 {
 	struct rte_port *port = &ports[portid];
 	uint32_t eth_overhead;
 	uint64_t rx_offloads;
-	int ret;
+	uint16_t mtu, new_mtu;
 	bool on;
 
-	/* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
-	if (port->dev_info.max_mtu != UINT16_MAX &&
-	    port->dev_info.max_rx_pktlen > port->dev_info.max_mtu)
-		eth_overhead = port->dev_info.max_rx_pktlen -
-				port->dev_info.max_mtu;
-	else
-		eth_overhead = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+	eth_overhead = get_eth_overhead(&port->dev_info);
 
-	rx_offloads = port->dev_conf.rxmode.offloads;
+	if (rte_eth_dev_get_mtu(portid, &mtu) != 0) {
+		printf("Failed to get MTU for port %u\n", portid);
+		return -1;
+	}
 
-	/* Default config value is 0 to use PMD specific overhead */
-	if (port->dev_conf.rxmode.max_rx_pkt_len == 0)
-		port->dev_conf.rxmode.max_rx_pkt_len = RTE_ETHER_MTU + eth_overhead;
+	if (max_rx_pktlen == 0)
+		max_rx_pktlen = mtu + eth_overhead;
+
+	rx_offloads = port->dev_conf.rxmode.offloads;
+	new_mtu = max_rx_pktlen - eth_overhead;
 
-	if (port->dev_conf.rxmode.max_rx_pkt_len <= RTE_ETHER_MTU + eth_overhead) {
+	if (new_mtu <= RTE_ETHER_MTU) {
 		rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 		on = false;
 	} else {
 		if ((port->dev_info.rx_offload_capa & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
 			fprintf(stderr,
 				"Frame size (%u) is not supported by port %u\n",
-				port->dev_conf.rxmode.max_rx_pkt_len,
-				portid);
+				max_rx_pktlen, portid);
 			return -1;
 		}
 		rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
@@ -3509,19 +3533,18 @@ update_jumbo_frame_offload(portid_t portid)
 		}
 	}
 
-	/* If JUMBO_FRAME is set MTU conversion done by ethdev layer,
-	 * if unset do it here
-	 */
-	if ((rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
-		ret = eth_dev_set_mtu_mp(portid,
-				port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead);
-		if (ret)
-			fprintf(stderr,
-				"Failed to set MTU to %u for port %u\n",
-				port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead,
-				portid);
+	if (mtu == new_mtu)
+		return 0;
+
+	if (eth_dev_set_mtu_mp(portid, new_mtu) != 0) {
+		fprintf(stderr,
+			"Failed to set MTU to %u for port %u\n",
+			new_mtu, portid);
+		return -1;
 	}
 
+	port->dev_conf.rxmode.mtu = new_mtu;
+
 	return 0;
 }
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 5863b2f43f3e..e3f022343af2 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -448,6 +448,8 @@ extern uint8_t bitrate_enabled;
 
 extern struct rte_fdir_conf fdir_conf;
 
+extern uint32_t max_rx_pkt_len;
+
 /*
  * Configuration of packet segments used to scatter received packets
  * if some of split features is configured.
@@ -1022,7 +1024,7 @@ uint16_t tx_pkt_set_dynf(uint16_t port_id, __rte_unused uint16_t queue,
 			 __rte_unused void *user_param);
 void add_tx_dynf_callback(portid_t portid);
 void remove_tx_dynf_callback(portid_t portid);
-int update_jumbo_frame_offload(portid_t portid);
+int update_jumbo_frame_offload(portid_t portid, uint32_t max_rx_pktlen);
 
 /*
  * Work-around of a compilation error with ICC on invocations of the
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 8a5c8310a8b4..5388d18125a6 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -136,7 +136,6 @@ static struct rte_eth_conf default_pmd_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
 		.split_hdr_size = 0,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 	},
 	.txmode = {
 		.mq_mode = ETH_MQ_TX_NONE,
diff --git a/app/test/test_link_bonding_mode4.c b/app/test/test_link_bonding_mode4.c
index f120b2e3be24..189d2430f27e 100644
--- a/app/test/test_link_bonding_mode4.c
+++ b/app/test/test_link_bonding_mode4.c
@@ -108,7 +108,6 @@ static struct link_bonding_unittest_params test_params  = {
 static struct rte_eth_conf default_pmd_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/app/test/test_link_bonding_rssconf.c b/app/test/test_link_bonding_rssconf.c
index 5dac60ca1edd..e7bb0497b663 100644
--- a/app/test/test_link_bonding_rssconf.c
+++ b/app/test/test_link_bonding_rssconf.c
@@ -81,7 +81,6 @@ static struct link_bonding_rssconf_unittest_params test_params  = {
 static struct rte_eth_conf default_pmd_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
@@ -93,7 +92,6 @@ static struct rte_eth_conf default_pmd_conf = {
 static struct rte_eth_conf rss_pmd_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
index 3a248d512c4a..a3b4f52c65e6 100644
--- a/app/test/test_pmd_perf.c
+++ b/app/test/test_pmd_perf.c
@@ -63,7 +63,6 @@ static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/doc/guides/nics/dpaa.rst b/doc/guides/nics/dpaa.rst
index 7355ec305916..9dad612058c6 100644
--- a/doc/guides/nics/dpaa.rst
+++ b/doc/guides/nics/dpaa.rst
@@ -335,7 +335,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The DPAA SoC family support a maximum of a 10240 jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames
 up to 10240 bytes can still reach the host interface.
 
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index df23a5704dca..831bc564883a 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst
@@ -545,7 +545,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The DPAA2 SoC family support a maximum of a 10240 jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 10240, frames
 up to 10240 bytes can still reach the host interface.
 
diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index e346018e4b80..f5a8fdd41398 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -166,7 +166,7 @@ Jumbo frame
 Supports Rx jumbo frames.
 
 * **[uses]    rte_eth_rxconf,rte_eth_rxmode**: ``offloads:DEV_RX_OFFLOAD_JUMBO_FRAME``.
-  ``dev_conf.rxmode.max_rx_pkt_len``.
+  ``dev_conf.rxmode.mtu``.
 * **[related] rte_eth_dev_info**: ``max_rx_pktlen``.
 * **[related] API**: ``rte_eth_dev_set_mtu()``.
 
diff --git a/doc/guides/nics/fm10k.rst b/doc/guides/nics/fm10k.rst
index 7b8ef0e7823d..ed6afd62703d 100644
--- a/doc/guides/nics/fm10k.rst
+++ b/doc/guides/nics/fm10k.rst
@@ -141,7 +141,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The FM10000 family of NICS support a maximum of a 15K jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 15364, frames
 up to 15364 bytes can still reach the host interface.
 
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index bae73f42d882..1f5619ed53fc 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -606,9 +606,9 @@ Driver options
   and each stride receives one packet. MPRQ can improve throughput for
   small-packet traffic.
 
-  When MPRQ is enabled, max_rx_pkt_len can be larger than the size of
+  When MPRQ is enabled, MTU can be larger than the size of
   user-provided mbuf even if DEV_RX_OFFLOAD_SCATTER isn't enabled. PMD will
-  configure large stride size enough to accommodate max_rx_pkt_len as long as
+  configure large stride size enough to accommodate MTU as long as
   device allows. Note that this can waste system memory compared to enabling Rx
   scatter and multi-segment packet.
 
diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst
index b1a868b054d1..8236cc3e93e0 100644
--- a/doc/guides/nics/octeontx.rst
+++ b/doc/guides/nics/octeontx.rst
@@ -157,7 +157,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The OCTEON TX SoC family NICs support a maximum of a 32K jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 32k, frames
 up to 32k bytes can still reach the host interface.
 
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 12d43ce93e28..98f23a2b2a3d 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -392,7 +392,7 @@ Maximum packet length
 ~~~~~~~~~~~~~~~~~~~~~
 
 The ThunderX SoC family NICs support a maximum of a 9K jumbo frame. The value
-is fixed and cannot be changed. So, even when the ``rxmode.max_rx_pkt_len``
+is fixed and cannot be changed. So, even when the ``rxmode.mtu``
 member of ``struct rte_eth_conf`` is set to a value lower than 9200, frames
 up to 9200 bytes can still reach the host interface.
 
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 309f1056cfba..69dbb87bc5ee 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -81,31 +81,6 @@ Deprecation Notices
   In 19.11 PMDs will still update the field even when the offload is not
   enabled.
 
-* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be
-  replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11.
-  The new ``mtu`` field will be used to configure the initial device MTU via
-  ``rte_eth_dev_configure()`` API.
-  Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now.
-  The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store
-  the configured ``mtu`` value,
-  and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will
-  be used to store the user configuration request.
-  Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled,
-  ``mtu`` field will be always valid.
-  When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU``
-  value will be used.
-  ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully,
-  either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``.
-
-  An application may need to configure device for a specific Rx packet size, like for
-  cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size
-  can't be bigger than Rx buffer size.
-  To cover these cases an application needs to know the device packet overhead to be
-  able to calculate the ``mtu`` corresponding to a Rx buffer size, for this
-  ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept,
-  the device packet overhead can be calculated as:
-  ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu``
-
 * ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
   will be removed in 21.11.
   Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
diff --git a/doc/guides/sample_app_ug/flow_classify.rst b/doc/guides/sample_app_ug/flow_classify.rst
index 812aaa87b05b..6c4c04e935e4 100644
--- a/doc/guides/sample_app_ug/flow_classify.rst
+++ b/doc/guides/sample_app_ug/flow_classify.rst
@@ -162,12 +162,7 @@ Forwarding application is shown below:
     :end-before: >8 End of initializing a given port.
 
 The Ethernet ports are configured with default settings using the
-``rte_eth_dev_configure()`` function and the ``port_conf_default`` struct.
-
-.. literalinclude:: ../../../examples/flow_classify/flow_classify.c
-    :language: c
-    :start-after: Ethernet ports configured with default settings using struct. 8<
-    :end-before: >8 End of configuration of Ethernet ports.
+``rte_eth_dev_configure()`` function.
 
 For this example the ports are set up with 1 RX and 1 TX queue using the
 ``rte_eth_rx_queue_setup()`` and ``rte_eth_tx_queue_setup()`` functions.
diff --git a/doc/guides/sample_app_ug/l3_forward.rst b/doc/guides/sample_app_ug/l3_forward.rst
index 2d5cd5f1c0ba..56af5cd5b383 100644
--- a/doc/guides/sample_app_ug/l3_forward.rst
+++ b/doc/guides/sample_app_ug/l3_forward.rst
@@ -65,7 +65,7 @@ The application has a number of command line options::
                              [--lookup LOOKUP_METHOD]
                              --config(port,queue,lcore)[,(port,queue,lcore)]
                              [--eth-dest=X,MM:MM:MM:MM:MM:MM]
-                             [--enable-jumbo [--max-pkt-len PKTLEN]]
+                             [--max-pkt-len PKTLEN]
                              [--no-numa]
                              [--hash-entry-num]
                              [--ipv6]
@@ -95,9 +95,7 @@ Where,
 
 * ``--eth-dest=X,MM:MM:MM:MM:MM:MM:`` Optional, ethernet destination for port X.
 
-* ``--enable-jumbo:`` Optional, enables jumbo frames.
-
-* ``--max-pkt-len:`` Optional, under the premise of enabling jumbo, maximum packet length in decimal (64-9600).
+* ``--max-pkt-len:`` Optional, maximum packet length in decimal (64-9600).
 
 * ``--no-numa:`` Optional, disables numa awareness.
 
diff --git a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
index 2cf6e4556f14..486247ac2e4f 100644
--- a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
+++ b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
@@ -236,7 +236,7 @@ The application has a number of command line options:
 
 ..  code-block:: console
 
-    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
+    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--alg=<val>] [--max-pkt-len PKTLEN] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
 
 
 where,
@@ -255,8 +255,6 @@ where,
 *   --alg=<val>: optional, ACL classify method to use, one of:
     ``scalar|sse|avx2|neon|altivec|avx512x16|avx512x32``
 
-*   --enable-jumbo: optional, enables jumbo frames
-
 *   --max-pkt-len: optional, maximum packet length in decimal (64-9600)
 
 *   --no-numa: optional, disables numa awareness
diff --git a/doc/guides/sample_app_ug/l3_forward_graph.rst b/doc/guides/sample_app_ug/l3_forward_graph.rst
index 03e9a85aa68c..0a3e0d44ecea 100644
--- a/doc/guides/sample_app_ug/l3_forward_graph.rst
+++ b/doc/guides/sample_app_ug/l3_forward_graph.rst
@@ -48,7 +48,7 @@ The application has a number of command line options similar to l3fwd::
                                    [-P]
                                    --config(port,queue,lcore)[,(port,queue,lcore)]
                                    [--eth-dest=X,MM:MM:MM:MM:MM:MM]
-                                   [--enable-jumbo [--max-pkt-len PKTLEN]]
+                                   [--max-pkt-len PKTLEN]
                                    [--no-numa]
                                    [--per-port-pool]
 
@@ -63,9 +63,7 @@ Where,
 
 * ``--eth-dest=X,MM:MM:MM:MM:MM:MM:`` Optional, ethernet destination for port X.
 
-* ``--enable-jumbo:`` Optional, enables jumbo frames.
-
-* ``--max-pkt-len:`` Optional, under the premise of enabling jumbo, maximum packet length in decimal (64-9600).
+* ``--max-pkt-len:`` Optional, maximum packet length in decimal (64-9600).
 
 * ``--no-numa:`` Optional, disables numa awareness.
 
diff --git a/doc/guides/sample_app_ug/l3_forward_power_man.rst b/doc/guides/sample_app_ug/l3_forward_power_man.rst
index 0495314c87d5..8817eaadbfc3 100644
--- a/doc/guides/sample_app_ug/l3_forward_power_man.rst
+++ b/doc/guides/sample_app_ug/l3_forward_power_man.rst
@@ -88,7 +88,7 @@ The application has a number of command line options:
 
 .. code-block:: console
 
-    ./<build_dir>/examples/dpdk-l3fwd_power [EAL options] -- -p PORTMASK [-P]  --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
+    ./<build_dir>/examples/dpdk-l3fwd_power [EAL options] -- -p PORTMASK [-P]  --config(port,queue,lcore)[,(port,queue,lcore)] [--max-pkt-len PKTLEN] [--no-numa]
 
 where,
 
@@ -99,8 +99,6 @@ where,
 
 *   --config (port,queue,lcore)[,(port,queue,lcore)]: determines which queues from which ports are mapped to which cores.
 
-*   --enable-jumbo: optional, enables jumbo frames
-
 *   --max-pkt-len: optional, maximum packet length in decimal (64-9600)
 
 *   --no-numa: optional, disables numa awareness
diff --git a/doc/guides/sample_app_ug/performance_thread.rst b/doc/guides/sample_app_ug/performance_thread.rst
index 9b09838f6448..7d1bf6eaae8c 100644
--- a/doc/guides/sample_app_ug/performance_thread.rst
+++ b/doc/guides/sample_app_ug/performance_thread.rst
@@ -59,7 +59,7 @@ The application has a number of command line options::
         -p PORTMASK [-P]
         --rx(port,queue,lcore,thread)[,(port,queue,lcore,thread)]
         --tx(lcore,thread)[,(lcore,thread)]
-        [--enable-jumbo] [--max-pkt-len PKTLEN]]  [--no-numa]
+        [--max-pkt-len PKTLEN]  [--no-numa]
         [--hash-entry-num] [--ipv6] [--no-lthreads] [--stat-lcore lcore]
         [--parse-ptype]
 
@@ -80,8 +80,6 @@ Where:
   the lcore the thread runs on, and the id of RX thread with which it is
   associated. The parameters are explained below.
 
-* ``--enable-jumbo``: optional, enables jumbo frames.
-
 * ``--max-pkt-len``: optional, maximum packet length in decimal (64-9600).
 
 * ``--no-numa``: optional, disables numa awareness.
diff --git a/doc/guides/sample_app_ug/skeleton.rst b/doc/guides/sample_app_ug/skeleton.rst
index f7bcd7ed2a1d..6d0de6440105 100644
--- a/doc/guides/sample_app_ug/skeleton.rst
+++ b/doc/guides/sample_app_ug/skeleton.rst
@@ -106,12 +106,7 @@ Forwarding application is shown below:
     :end-before: >8 End of main functional part of port initialization.
 
 The Ethernet ports are configured with default settings using the
-``rte_eth_dev_configure()`` function and the ``port_conf_default`` struct:
-
-.. literalinclude:: ../../../examples/skeleton/basicfwd.c
-        :language: c
-        :start-after: Configuration of ethernet ports. 8<
-        :end-before: >8 End of configuration of ethernet ports.
+``rte_eth_dev_configure()`` function.
 
 For this example the ports are set up with 1 RX and 1 TX queue using the
 ``rte_eth_rx_queue_setup()`` and ``rte_eth_tx_queue_setup()`` functions.
diff --git a/drivers/net/atlantic/atl_ethdev.c b/drivers/net/atlantic/atl_ethdev.c
index 0ce35eb519e2..3f654c071566 100644
--- a/drivers/net/atlantic/atl_ethdev.c
+++ b/drivers/net/atlantic/atl_ethdev.c
@@ -1636,9 +1636,6 @@ atl_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	if (mtu < RTE_ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen)
 		return -EINVAL;
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	return 0;
 }
 
diff --git a/drivers/net/avp/avp_ethdev.c b/drivers/net/avp/avp_ethdev.c
index 6cb8bb4338de..932ec90265cf 100644
--- a/drivers/net/avp/avp_ethdev.c
+++ b/drivers/net/avp/avp_ethdev.c
@@ -1059,17 +1059,18 @@ static int
 avp_dev_enable_scattered(struct rte_eth_dev *eth_dev,
 			 struct avp_dev *avp)
 {
-	unsigned int max_rx_pkt_len;
+	unsigned int max_rx_pktlen;
 
-	max_rx_pkt_len = eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	max_rx_pktlen = eth_dev->data->mtu + RTE_ETHER_HDR_LEN +
+		RTE_ETHER_CRC_LEN;
 
-	if ((max_rx_pkt_len > avp->guest_mbuf_size) ||
-	    (max_rx_pkt_len > avp->host_mbuf_size)) {
+	if (max_rx_pktlen > avp->guest_mbuf_size ||
+	    max_rx_pktlen > avp->host_mbuf_size) {
 		/*
 		 * If the guest MTU is greater than either the host or guest
 		 * buffers then chained mbufs have to be enabled in the TX
 		 * direction.  It is assumed that the application will not need
-		 * to send packets larger than their max_rx_pkt_len (MRU).
+		 * to send packets larger than their MTU.
 		 */
 		return 1;
 	}
@@ -1124,7 +1125,7 @@ avp_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
 
 	PMD_DRV_LOG(DEBUG, "AVP max_rx_pkt_len=(%u,%u) mbuf_size=(%u,%u)\n",
 		    avp->max_rx_pkt_len,
-		    eth_dev->data->dev_conf.rxmode.max_rx_pkt_len,
+		    eth_dev->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN,
 		    avp->host_mbuf_size,
 		    avp->guest_mbuf_size);
 
@@ -1889,8 +1890,8 @@ avp_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 			 * function; send it truncated to avoid the performance
 			 * hit of having to manage returning the already
 			 * allocated buffer to the free list.  This should not
-			 * happen since the application should have set the
-			 * max_rx_pkt_len based on its MTU and it should be
+			 * happen since the application should have not send
+			 * packages larger than its MTU and it should be
 			 * policing its own packet sizes.
 			 */
 			txq->errors++;
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index ebd5411fddf3..76cd892eec7b 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -350,7 +350,7 @@ axgbe_dev_start(struct rte_eth_dev *dev)
 	struct axgbe_port *pdata = dev->data->dev_private;
 	int ret;
 	struct rte_eth_dev_data *dev_data = dev->data;
-	uint16_t max_pkt_len = dev_data->dev_conf.rxmode.max_rx_pkt_len;
+	uint16_t max_pkt_len;
 
 	dev->dev_ops = &axgbe_eth_dev_ops;
 
@@ -383,6 +383,8 @@ axgbe_dev_start(struct rte_eth_dev *dev)
 
 	rte_bit_relaxed_clear32(AXGBE_STOPPED, &pdata->dev_state);
 	rte_bit_relaxed_clear32(AXGBE_DOWN, &pdata->dev_state);
+
+	max_pkt_len = dev_data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
 	if ((dev_data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SCATTER) ||
 				max_pkt_len > pdata->rx_buf_size)
 		dev_data->scattered_rx = 1;
@@ -1490,7 +1492,7 @@ static int axgb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 				dev->data->port_id);
 		return -EBUSY;
 	}
-	if (frame_size > AXGBE_ETH_MAX_LEN) {
+	if (mtu > RTE_ETHER_MTU) {
 		dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 		val = 1;
@@ -1500,7 +1502,6 @@ static int axgb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		val = 0;
 	}
 	AXGMAC_IOWRITE_BITS(pdata, MAC_RCR, JE, val);
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	return 0;
 }
 
diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
index 463886f17a58..009a94e9a8fa 100644
--- a/drivers/net/bnx2x/bnx2x_ethdev.c
+++ b/drivers/net/bnx2x/bnx2x_ethdev.c
@@ -175,16 +175,12 @@ static int
 bnx2x_dev_configure(struct rte_eth_dev *dev)
 {
 	struct bnx2x_softc *sc = dev->data->dev_private;
-	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
 
 	int mp_ncpus = sysconf(_SC_NPROCESSORS_CONF);
 
 	PMD_INIT_FUNC_TRACE(sc);
 
-	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		sc->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len;
-		dev->data->mtu = sc->mtu;
-	}
+	sc->mtu = dev->data->dev_conf.rxmode.mtu;
 
 	if (dev->data->nb_tx_queues > dev->data->nb_rx_queues) {
 		PMD_DRV_LOG(ERR, sc, "The number of TX queues is greater than number of RX queues");
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index aa7e7fdc85fa..8c6f20b75aed 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1157,13 +1157,8 @@ static int bnxt_dev_configure_op(struct rte_eth_dev *eth_dev)
 		rx_offloads |= DEV_RX_OFFLOAD_RSS_HASH;
 	eth_dev->data->dev_conf.rxmode.offloads = rx_offloads;
 
-	if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		eth_dev->data->mtu =
-			eth_dev->data->dev_conf.rxmode.max_rx_pkt_len -
-			RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN - VLAN_TAG_SIZE *
-			BNXT_NUM_VLANS;
-		bnxt_mtu_set_op(eth_dev, eth_dev->data->mtu);
-	}
+	bnxt_mtu_set_op(eth_dev, eth_dev->data->mtu);
+
 	return 0;
 
 resource_error:
@@ -1201,6 +1196,7 @@ void bnxt_print_link_info(struct rte_eth_dev *eth_dev)
  */
 static int bnxt_scattered_rx(struct rte_eth_dev *eth_dev)
 {
+	uint32_t overhead = BNXT_MAX_PKT_LEN - BNXT_MAX_MTU;
 	uint16_t buf_size;
 	int i;
 
@@ -1215,7 +1211,7 @@ static int bnxt_scattered_rx(struct rte_eth_dev *eth_dev)
 
 		buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rxq->mb_pool) -
 				      RTE_PKTMBUF_HEADROOM);
-		if (eth_dev->data->dev_conf.rxmode.max_rx_pkt_len > buf_size)
+		if (eth_dev->data->mtu + overhead > buf_size)
 			return 1;
 	}
 	return 0;
@@ -3026,6 +3022,7 @@ bnxt_tx_burst_mode_get(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id,
 
 int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
 {
+	uint32_t overhead = BNXT_MAX_PKT_LEN - BNXT_MAX_MTU;
 	struct bnxt *bp = eth_dev->data->dev_private;
 	uint32_t new_pkt_size;
 	uint32_t rc = 0;
@@ -3039,8 +3036,7 @@ int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
 	if (!eth_dev->data->nb_rx_queues)
 		return rc;
 
-	new_pkt_size = new_mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
-		       VLAN_TAG_SIZE * BNXT_NUM_VLANS;
+	new_pkt_size = new_mtu + overhead;
 
 	/*
 	 * Disallow any MTU change that would require scattered receive support
@@ -3067,7 +3063,7 @@ int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
 	}
 
 	/* Is there a change in mtu setting? */
-	if (eth_dev->data->dev_conf.rxmode.max_rx_pkt_len == new_pkt_size)
+	if (eth_dev->data->mtu == new_mtu)
 		return rc;
 
 	for (i = 0; i < bp->nr_vnics; i++) {
@@ -3089,9 +3085,6 @@ int bnxt_mtu_set_op(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
 		}
 	}
 
-	if (!rc)
-		eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = new_pkt_size;
-
 	if (bnxt_hwrm_config_host_mtu(bp))
 		PMD_DRV_LOG(WARNING, "Failed to configure host MTU\n");
 
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index 542c6633b53d..2ee1cf938880 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1724,8 +1724,8 @@ slave_configure(struct rte_eth_dev *bonded_eth_dev,
 		slave_eth_dev->data->dev_conf.rxmode.offloads &=
 				~DEV_RX_OFFLOAD_VLAN_FILTER;
 
-	slave_eth_dev->data->dev_conf.rxmode.max_rx_pkt_len =
-			bonded_eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	slave_eth_dev->data->dev_conf.rxmode.mtu =
+			bonded_eth_dev->data->dev_conf.rxmode.mtu;
 
 	if (bonded_eth_dev->data->dev_conf.rxmode.offloads &
 			DEV_RX_OFFLOAD_JUMBO_FRAME)
diff --git a/drivers/net/cnxk/cnxk_ethdev.c b/drivers/net/cnxk/cnxk_ethdev.c
index 966bd23c7f98..c94fc505fef1 100644
--- a/drivers/net/cnxk/cnxk_ethdev.c
+++ b/drivers/net/cnxk/cnxk_ethdev.c
@@ -209,7 +209,7 @@ nix_enable_mseg_on_jumbo(struct cnxk_eth_rxq_sp *rxq)
 	mbp_priv = rte_mempool_get_priv(rxq->qconf.mp);
 	buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
 
-	if (eth_dev->data->dev_conf.rxmode.max_rx_pkt_len > buffsz) {
+	if (eth_dev->data->mtu + (uint32_t)CNXK_NIX_L2_OVERHEAD > buffsz) {
 		dev->rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
 		dev->tx_offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
 	}
@@ -220,18 +220,13 @@ nix_recalc_mtu(struct rte_eth_dev *eth_dev)
 {
 	struct rte_eth_dev_data *data = eth_dev->data;
 	struct cnxk_eth_rxq_sp *rxq;
-	uint16_t mtu;
 	int rc;
 
 	rxq = ((struct cnxk_eth_rxq_sp *)data->rx_queues[0]) - 1;
 	/* Setup scatter mode if needed by jumbo */
 	nix_enable_mseg_on_jumbo(rxq);
 
-	/* Setup MTU based on max_rx_pkt_len */
-	mtu = data->dev_conf.rxmode.max_rx_pkt_len - CNXK_NIX_L2_OVERHEAD +
-				CNXK_NIX_MAX_VTAG_ACT_SIZE;
-
-	rc = cnxk_nix_mtu_set(eth_dev, mtu);
+	rc = cnxk_nix_mtu_set(eth_dev, data->mtu);
 	if (rc)
 		plt_err("Failed to set default MTU size, rc=%d", rc);
 
diff --git a/drivers/net/cnxk/cnxk_ethdev_ops.c b/drivers/net/cnxk/cnxk_ethdev_ops.c
index b6cc5286c6d0..695d0d6fd3e2 100644
--- a/drivers/net/cnxk/cnxk_ethdev_ops.c
+++ b/drivers/net/cnxk/cnxk_ethdev_ops.c
@@ -440,16 +440,10 @@ cnxk_nix_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 		goto exit;
 	}
 
-	frame_size += RTE_ETHER_CRC_LEN;
-
-	if (frame_size > RTE_ETHER_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
-
-	/* Update max_rx_pkt_len */
-	data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 exit:
 	return rc;
 }
diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c
index cd9aa9f84b63..458111ae5b16 100644
--- a/drivers/net/cxgbe/cxgbe_ethdev.c
+++ b/drivers/net/cxgbe/cxgbe_ethdev.c
@@ -310,11 +310,11 @@ int cxgbe_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 		return err;
 
 	/* Must accommodate at least RTE_ETHER_MIN_MTU */
-	if (new_mtu < RTE_ETHER_MIN_MTU || new_mtu > dev_info.max_rx_pktlen)
+	if (mtu < RTE_ETHER_MIN_MTU || new_mtu > dev_info.max_rx_pktlen)
 		return -EINVAL;
 
 	/* set to jumbo mode if needed */
-	if (new_mtu > CXGBE_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		eth_dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
@@ -323,9 +323,6 @@ int cxgbe_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 
 	err = t4_set_rxmode(adapter, adapter->mbox, pi->viid, new_mtu, -1, -1,
 			    -1, -1, true);
-	if (!err)
-		eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = new_mtu;
-
 	return err;
 }
 
@@ -623,7 +620,8 @@ int cxgbe_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
 			     const struct rte_eth_rxconf *rx_conf __rte_unused,
 			     struct rte_mempool *mp)
 {
-	unsigned int pkt_len = eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	unsigned int pkt_len = eth_dev->data->mtu + RTE_ETHER_HDR_LEN +
+		RTE_ETHER_CRC_LEN;
 	struct port_info *pi = eth_dev->data->dev_private;
 	struct adapter *adapter = pi->adapter;
 	struct rte_eth_dev_info dev_info;
@@ -682,7 +680,7 @@ int cxgbe_dev_rx_queue_setup(struct rte_eth_dev *eth_dev,
 	rxq->fl.size = temp_nb_desc;
 
 	/* Set to jumbo mode if necessary */
-	if (pkt_len > CXGBE_ETH_MAX_LEN)
+	if (eth_dev->data->mtu > RTE_ETHER_MTU)
 		eth_dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
diff --git a/drivers/net/cxgbe/cxgbe_main.c b/drivers/net/cxgbe/cxgbe_main.c
index 6dd1bf1f836e..91d6bb9bbcb0 100644
--- a/drivers/net/cxgbe/cxgbe_main.c
+++ b/drivers/net/cxgbe/cxgbe_main.c
@@ -1661,8 +1661,7 @@ int cxgbe_link_start(struct port_info *pi)
 	unsigned int mtu;
 	int ret;
 
-	mtu = pi->eth_dev->data->dev_conf.rxmode.max_rx_pkt_len -
-	      (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN);
+	mtu = pi->eth_dev->data->mtu;
 
 	conf_offloads = pi->eth_dev->data->dev_conf.rxmode.offloads;
 
diff --git a/drivers/net/cxgbe/sge.c b/drivers/net/cxgbe/sge.c
index e5f7721dc4b3..830f5192474d 100644
--- a/drivers/net/cxgbe/sge.c
+++ b/drivers/net/cxgbe/sge.c
@@ -1113,7 +1113,7 @@ int t4_eth_xmit(struct sge_eth_txq *txq, struct rte_mbuf *mbuf,
 	u32 wr_mid;
 	u64 cntrl, *end;
 	bool v6;
-	u32 max_pkt_len = txq->data->dev_conf.rxmode.max_rx_pkt_len;
+	u32 max_pkt_len;
 
 	/* Reject xmit if queue is stopped */
 	if (unlikely(txq->flags & EQ_STOPPED))
@@ -1129,6 +1129,7 @@ int t4_eth_xmit(struct sge_eth_txq *txq, struct rte_mbuf *mbuf,
 		return 0;
 	}
 
+	max_pkt_len = txq->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
 	if ((!(m->ol_flags & PKT_TX_TCP_SEG)) &&
 	    (unlikely(m->pkt_len > max_pkt_len)))
 		goto out_free;
diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index 59f4a93b3ed4..0c2b3fbf552f 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -187,15 +187,13 @@ dpaa_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EINVAL;
 	}
 
-	if (frame_size > DPAA_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |=
 						DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	fman_if_set_maxfrm(dev->process_private, frame_size);
 
 	return 0;
@@ -213,6 +211,7 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
 	struct fman_if *fif = dev->process_private;
 	struct __fman_if *__fif;
 	struct rte_intr_handle *intr_handle;
+	uint32_t max_rx_pktlen;
 	int speed, duplex;
 	int ret;
 
@@ -238,27 +237,17 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
 		tx_offloads, dev_tx_offloads_nodis);
 	}
 
-	if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		uint32_t max_len;
-
-		DPAA_PMD_DEBUG("enabling jumbo");
-
-		if (dev->data->dev_conf.rxmode.max_rx_pkt_len <=
-		    DPAA_MAX_RX_PKT_LEN)
-			max_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
-		else {
-			DPAA_PMD_INFO("enabling jumbo override conf max len=%d "
-				"supported is %d",
-				dev->data->dev_conf.rxmode.max_rx_pkt_len,
-				DPAA_MAX_RX_PKT_LEN);
-			max_len = DPAA_MAX_RX_PKT_LEN;
-		}
-
-		fman_if_set_maxfrm(dev->process_private, max_len);
-		dev->data->mtu = max_len
-			- RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN - VLAN_TAG_SIZE;
+	max_rx_pktlen = eth_conf->rxmode.mtu + RTE_ETHER_HDR_LEN +
+			RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE;
+	if (max_rx_pktlen > DPAA_MAX_RX_PKT_LEN) {
+		DPAA_PMD_INFO("enabling jumbo override conf max len=%d "
+			"supported is %d",
+			max_rx_pktlen, DPAA_MAX_RX_PKT_LEN);
+		max_rx_pktlen = DPAA_MAX_RX_PKT_LEN;
 	}
 
+	fman_if_set_maxfrm(dev->process_private, max_rx_pktlen);
+
 	if (rx_offloads & DEV_RX_OFFLOAD_SCATTER) {
 		DPAA_PMD_DEBUG("enabling scatter mode");
 		fman_if_set_sg(dev->process_private, 1);
@@ -936,6 +925,7 @@ int dpaa_eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 	u32 flags = 0;
 	int ret;
 	u32 buffsz = rte_pktmbuf_data_room_size(mp) - RTE_PKTMBUF_HEADROOM;
+	uint32_t max_rx_pktlen;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -977,17 +967,17 @@ int dpaa_eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 		return -EINVAL;
 	}
 
+	max_rx_pktlen = dev->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
+		VLAN_TAG_SIZE;
 	/* Max packet can fit in single buffer */
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len <= buffsz) {
+	if (max_rx_pktlen <= buffsz) {
 		;
 	} else if (dev->data->dev_conf.rxmode.offloads &
 			DEV_RX_OFFLOAD_SCATTER) {
-		if (dev->data->dev_conf.rxmode.max_rx_pkt_len >
-			buffsz * DPAA_SGT_MAX_ENTRIES) {
-			DPAA_PMD_ERR("max RxPkt size %d too big to fit "
+		if (max_rx_pktlen > buffsz * DPAA_SGT_MAX_ENTRIES) {
+			DPAA_PMD_ERR("Maximum Rx packet size %d too big to fit "
 				"MaxSGlist %d",
-				dev->data->dev_conf.rxmode.max_rx_pkt_len,
-				buffsz * DPAA_SGT_MAX_ENTRIES);
+				max_rx_pktlen, buffsz * DPAA_SGT_MAX_ENTRIES);
 			rte_errno = EOVERFLOW;
 			return -rte_errno;
 		}
@@ -995,8 +985,7 @@ int dpaa_eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 		DPAA_PMD_WARN("The requested maximum Rx packet size (%u) is"
 		     " larger than a single mbuf (%u) and scattered"
 		     " mode has not been requested",
-		     dev->data->dev_conf.rxmode.max_rx_pkt_len,
-		     buffsz - RTE_PKTMBUF_HEADROOM);
+		     max_rx_pktlen, buffsz - RTE_PKTMBUF_HEADROOM);
 	}
 
 	dpaa_intf->bp_info = DPAA_MEMPOOL_TO_POOL_INFO(mp);
@@ -1034,8 +1023,7 @@ int dpaa_eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 
 	dpaa_intf->valid = 1;
 	DPAA_PMD_DEBUG("if:%s sg_on = %d, max_frm =%d", dpaa_intf->name,
-		fman_if_get_sg_enable(fif),
-		dev->data->dev_conf.rxmode.max_rx_pkt_len);
+		fman_if_get_sg_enable(fif), max_rx_pktlen);
 	/* checking if push mode only, no error check for now */
 	if (!rxq->is_static &&
 	    dpaa_push_mode_max_queue > dpaa_push_queue_idx) {
diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
index ff8ae89922c7..ef709bba4793 100644
--- a/drivers/net/dpaa2/dpaa2_ethdev.c
+++ b/drivers/net/dpaa2/dpaa2_ethdev.c
@@ -540,6 +540,7 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 	int tx_l3_csum_offload = false;
 	int tx_l4_csum_offload = false;
 	int ret, tc_index;
+	uint32_t max_rx_pktlen;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -559,25 +560,19 @@ dpaa2_eth_dev_configure(struct rte_eth_dev *dev)
 		tx_offloads, dev_tx_offloads_nodis);
 	}
 
-	if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		if (eth_conf->rxmode.max_rx_pkt_len <= DPAA2_MAX_RX_PKT_LEN) {
-			ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW,
-				priv->token, eth_conf->rxmode.max_rx_pkt_len
-				- RTE_ETHER_CRC_LEN);
-			if (ret) {
-				DPAA2_PMD_ERR(
-					"Unable to set mtu. check config");
-				return ret;
-			}
-			dev->data->mtu =
-				dev->data->dev_conf.rxmode.max_rx_pkt_len -
-				RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN -
-				VLAN_TAG_SIZE;
-				DPAA2_PMD_INFO("MTU configured for the device: %d",
-						dev->data->mtu);
-		} else {
-			return -1;
+	max_rx_pktlen = eth_conf->rxmode.mtu + RTE_ETHER_HDR_LEN +
+				RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE;
+	if (max_rx_pktlen <= DPAA2_MAX_RX_PKT_LEN) {
+		ret = dpni_set_max_frame_length(dpni, CMD_PRI_LOW,
+			priv->token, max_rx_pktlen - RTE_ETHER_CRC_LEN);
+		if (ret != 0) {
+			DPAA2_PMD_ERR("Unable to set mtu. check config");
+			return ret;
 		}
+		DPAA2_PMD_INFO("MTU configured for the device: %d",
+				dev->data->mtu);
+	} else {
+		return -1;
 	}
 
 	if (eth_conf->rxmode.mq_mode == ETH_MQ_RX_RSS) {
@@ -1471,15 +1466,13 @@ dpaa2_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	if (mtu < RTE_ETHER_MIN_MTU || frame_size > DPAA2_MAX_RX_PKT_LEN)
 		return -EINVAL;
 
-	if (frame_size > DPAA2_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |=
 						DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	/* Set the Max Rx frame length as 'mtu' +
 	 * Maximum Ethernet header length
 	 */
diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
index a0ca371b0275..6f418a36aa04 100644
--- a/drivers/net/e1000/em_ethdev.c
+++ b/drivers/net/e1000/em_ethdev.c
@@ -1818,7 +1818,7 @@ eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	rctl = E1000_READ_REG(hw, E1000_RCTL);
 
 	/* switch to jumbo mode if needed */
-	if (frame_size > E1000_ETH_MAX_LEN) {
+	if (mtu > RTE_ETHER_MTU) {
 		dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 		rctl |= E1000_RCTL_LPE;
@@ -1829,8 +1829,6 @@ eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	}
 	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	return 0;
 }
 
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 6510cd7cebd0..867e5008ac20 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -2681,9 +2681,7 @@ igb_vlan_hw_extend_disable(struct rte_eth_dev *dev)
 	E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
 
 	/* Update maximum packet length */
-	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		E1000_WRITE_REG(hw, E1000_RLPML,
-				dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	E1000_WRITE_REG(hw, E1000_RLPML, dev->data->mtu + E1000_ETH_OVERHEAD);
 }
 
 static void
@@ -2699,10 +2697,8 @@ igb_vlan_hw_extend_enable(struct rte_eth_dev *dev)
 	E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
 
 	/* Update maximum packet length */
-	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		E1000_WRITE_REG(hw, E1000_RLPML,
-			dev->data->dev_conf.rxmode.max_rx_pkt_len +
-						VLAN_TAG_SIZE);
+	E1000_WRITE_REG(hw, E1000_RLPML,
+		dev->data->mtu + E1000_ETH_OVERHEAD + VLAN_TAG_SIZE);
 }
 
 static int
@@ -4400,7 +4396,7 @@ eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	rctl = E1000_READ_REG(hw, E1000_RCTL);
 
 	/* switch to jumbo mode if needed */
-	if (frame_size > E1000_ETH_MAX_LEN) {
+	if (mtu > RTE_ETHER_MTU) {
 		dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 		rctl |= E1000_RCTL_LPE;
@@ -4411,11 +4407,7 @@ eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	}
 	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
-	E1000_WRITE_REG(hw, E1000_RLPML,
-			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	E1000_WRITE_REG(hw, E1000_RLPML, frame_size);
 
 	return 0;
 }
diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c
index 8d64d7397a4b..6e1315f37d92 100644
--- a/drivers/net/e1000/igb_rxtx.c
+++ b/drivers/net/e1000/igb_rxtx.c
@@ -2329,6 +2329,7 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
 	uint32_t srrctl;
 	uint16_t buf_size;
 	uint16_t rctl_bsize;
+	uint32_t max_len;
 	uint16_t i;
 	int ret;
 
@@ -2347,9 +2348,8 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
 	/*
 	 * Configure support of jumbo frames, if any.
 	 */
+	max_len = dev->data->mtu + E1000_ETH_OVERHEAD;
 	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		uint32_t max_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
-
 		rctl |= E1000_RCTL_LPE;
 
 		/*
@@ -2427,8 +2427,7 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
 					       E1000_SRRCTL_BSIZEPKT_SHIFT);
 
 			/* It adds dual VLAN length for supporting dual VLAN */
-			if ((dev->data->dev_conf.rxmode.max_rx_pkt_len +
-						2 * VLAN_TAG_SIZE) > buf_size){
+			if ((max_len + 2 * VLAN_TAG_SIZE) > buf_size) {
 				if (!dev->data->scattered_rx)
 					PMD_INIT_LOG(DEBUG,
 						     "forcing scatter mode");
@@ -2652,15 +2651,15 @@ eth_igbvf_rx_init(struct rte_eth_dev *dev)
 	uint32_t srrctl;
 	uint16_t buf_size;
 	uint16_t rctl_bsize;
+	uint32_t max_len;
 	uint16_t i;
 	int ret;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	/* setup MTU */
-	e1000_rlpml_set_vf(hw,
-		(uint16_t)(dev->data->dev_conf.rxmode.max_rx_pkt_len +
-		VLAN_TAG_SIZE));
+	max_len = dev->data->mtu + E1000_ETH_OVERHEAD;
+	e1000_rlpml_set_vf(hw, (uint16_t)(max_len + VLAN_TAG_SIZE));
 
 	/* Configure and enable each RX queue. */
 	rctl_bsize = 0;
@@ -2717,8 +2716,7 @@ eth_igbvf_rx_init(struct rte_eth_dev *dev)
 					       E1000_SRRCTL_BSIZEPKT_SHIFT);
 
 			/* It adds dual VLAN length for supporting dual VLAN */
-			if ((dev->data->dev_conf.rxmode.max_rx_pkt_len +
-						2 * VLAN_TAG_SIZE) > buf_size){
+			if ((max_len + 2 * VLAN_TAG_SIZE) > buf_size) {
 				if (!dev->data->scattered_rx)
 					PMD_INIT_LOG(DEBUG,
 						     "forcing scatter mode");
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index a82d4b628736..e2f7213acb84 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -677,26 +677,14 @@ static int ena_queue_start_all(struct rte_eth_dev *dev,
 	return rc;
 }
 
-static uint32_t ena_get_mtu_conf(struct ena_adapter *adapter)
-{
-	uint32_t max_frame_len = adapter->max_mtu;
-
-	if (adapter->edev_data->dev_conf.rxmode.offloads &
-	    DEV_RX_OFFLOAD_JUMBO_FRAME)
-		max_frame_len =
-			adapter->edev_data->dev_conf.rxmode.max_rx_pkt_len;
-
-	return max_frame_len;
-}
-
 static int ena_check_valid_conf(struct ena_adapter *adapter)
 {
-	uint32_t max_frame_len = ena_get_mtu_conf(adapter);
+	uint32_t mtu = adapter->edev_data->mtu;
 
-	if (max_frame_len > adapter->max_mtu || max_frame_len < ENA_MIN_MTU) {
+	if (mtu > adapter->max_mtu || mtu < ENA_MIN_MTU) {
 		PMD_INIT_LOG(ERR,
 			"Unsupported MTU of %d. Max MTU: %d, min MTU: %d\n",
-			max_frame_len, adapter->max_mtu, ENA_MIN_MTU);
+			mtu, adapter->max_mtu, ENA_MIN_MTU);
 		return ENA_COM_UNSUPPORTED;
 	}
 
@@ -869,10 +857,10 @@ static int ena_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	ena_dev = &adapter->ena_dev;
 	ena_assert_msg(ena_dev != NULL, "Uninitialized device\n");
 
-	if (mtu > ena_get_mtu_conf(adapter) || mtu < ENA_MIN_MTU) {
+	if (mtu > adapter->max_mtu || mtu < ENA_MIN_MTU) {
 		PMD_DRV_LOG(ERR,
 			"Invalid MTU setting. New MTU: %d, max MTU: %d, min MTU: %d\n",
-			mtu, ena_get_mtu_conf(adapter), ENA_MIN_MTU);
+			mtu, adapter->max_mtu, ENA_MIN_MTU);
 		return -EINVAL;
 	}
 
@@ -1943,7 +1931,10 @@ static int ena_infos_get(struct rte_eth_dev *dev,
 	dev_info->hash_key_size = ENA_HASH_KEY_SIZE;
 
 	dev_info->min_rx_bufsize = ENA_MIN_FRAME_LEN;
-	dev_info->max_rx_pktlen  = adapter->max_mtu;
+	dev_info->max_rx_pktlen  = adapter->max_mtu + RTE_ETHER_HDR_LEN +
+		RTE_ETHER_CRC_LEN;
+	dev_info->min_mtu = ENA_MIN_MTU;
+	dev_info->max_mtu = adapter->max_mtu;
 	dev_info->max_mac_addrs = 1;
 
 	dev_info->max_rx_queues = adapter->max_num_io_queues;
diff --git a/drivers/net/enetc/enetc_ethdev.c b/drivers/net/enetc/enetc_ethdev.c
index 246aff467248..1e27ed298354 100644
--- a/drivers/net/enetc/enetc_ethdev.c
+++ b/drivers/net/enetc/enetc_ethdev.c
@@ -681,7 +681,7 @@ enetc_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EINVAL;
 	}
 
-	if (frame_size > ENETC_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads &=
 						DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
@@ -691,8 +691,6 @@ enetc_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	enetc_port_wr(enetc_hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE);
 	enetc_port_wr(enetc_hw, ENETC_PTXMBAR, 2 * ENETC_MAC_MAXFRM_SIZE);
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	/*setting the MTU*/
 	enetc_port_wr(enetc_hw, ENETC_PM0_MAXFRM, ENETC_SET_MAXFRM(frame_size) |
 		      ENETC_SET_TX_MTU(ENETC_MAC_MAXFRM_SIZE));
@@ -709,23 +707,15 @@ enetc_dev_configure(struct rte_eth_dev *dev)
 	struct rte_eth_conf *eth_conf = &dev->data->dev_conf;
 	uint64_t rx_offloads = eth_conf->rxmode.offloads;
 	uint32_t checksum = L3_CKSUM | L4_CKSUM;
+	uint32_t max_len;
 
 	PMD_INIT_FUNC_TRACE();
 
-	if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		uint32_t max_len;
-
-		max_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
-
-		enetc_port_wr(enetc_hw, ENETC_PM0_MAXFRM,
-			      ENETC_SET_MAXFRM(max_len));
-		enetc_port_wr(enetc_hw, ENETC_PTCMSDUR(0),
-			      ENETC_MAC_MAXFRM_SIZE);
-		enetc_port_wr(enetc_hw, ENETC_PTXMBAR,
-			      2 * ENETC_MAC_MAXFRM_SIZE);
-		dev->data->mtu = RTE_ETHER_MAX_LEN - RTE_ETHER_HDR_LEN -
-			RTE_ETHER_CRC_LEN;
-	}
+	max_len = dev->data->dev_conf.rxmode.mtu + RTE_ETHER_HDR_LEN +
+		RTE_ETHER_CRC_LEN;
+	enetc_port_wr(enetc_hw, ENETC_PM0_MAXFRM, ENETC_SET_MAXFRM(max_len));
+	enetc_port_wr(enetc_hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE);
+	enetc_port_wr(enetc_hw, ENETC_PTXMBAR, 2 * ENETC_MAC_MAXFRM_SIZE);
 
 	if (rx_offloads & DEV_RX_OFFLOAD_KEEP_CRC) {
 		int config;
diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index b03e56bc2500..9afb37751fac 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -459,7 +459,7 @@ static int enicpmd_dev_info_get(struct rte_eth_dev *eth_dev,
 	 * max mtu regardless of the current mtu (vNIC's mtu). vNIC mtu is
 	 * a hint to the driver to size receive buffers accordingly so that
 	 * larger-than-vnic-mtu packets get truncated.. For DPDK, we let
-	 * the user decide the buffer size via rxmode.max_rx_pkt_len, basically
+	 * the user decide the buffer size via rxmode.mtu, basically
 	 * ignoring vNIC mtu.
 	 */
 	device_info->max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->max_mtu);
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 2affd380c6a4..dfc7f5d1f94f 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -282,7 +282,7 @@ enic_alloc_rx_queue_mbufs(struct enic *enic, struct vnic_rq *rq)
 	struct rq_enet_desc *rqd = rq->ring.descs;
 	unsigned i;
 	dma_addr_t dma_addr;
-	uint32_t max_rx_pkt_len;
+	uint32_t max_rx_pktlen;
 	uint16_t rq_buf_len;
 
 	if (!rq->in_use)
@@ -293,16 +293,16 @@ enic_alloc_rx_queue_mbufs(struct enic *enic, struct vnic_rq *rq)
 
 	/*
 	 * If *not* using scatter and the mbuf size is greater than the
-	 * requested max packet size (max_rx_pkt_len), then reduce the
-	 * posted buffer size to max_rx_pkt_len. HW still receives packets
-	 * larger than max_rx_pkt_len, but they will be truncated, which we
+	 * requested max packet size (mtu + eth overhead), then reduce the
+	 * posted buffer size to max packet size. HW still receives packets
+	 * larger than max packet size, but they will be truncated, which we
 	 * drop in the rx handler. Not ideal, but better than returning
 	 * large packets when the user is not expecting them.
 	 */
-	max_rx_pkt_len = enic->rte_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->rte_dev->data->mtu);
 	rq_buf_len = rte_pktmbuf_data_room_size(rq->mp) - RTE_PKTMBUF_HEADROOM;
-	if (max_rx_pkt_len < rq_buf_len && !rq->data_queue_enable)
-		rq_buf_len = max_rx_pkt_len;
+	if (max_rx_pktlen < rq_buf_len && !rq->data_queue_enable)
+		rq_buf_len = max_rx_pktlen;
 	for (i = 0; i < rq->ring.desc_count; i++, rqd++) {
 		mb = rte_mbuf_raw_alloc(rq->mp);
 		if (mb == NULL) {
@@ -818,7 +818,7 @@ int enic_alloc_rq(struct enic *enic, uint16_t queue_idx,
 	unsigned int mbuf_size, mbufs_per_pkt;
 	unsigned int nb_sop_desc, nb_data_desc;
 	uint16_t min_sop, max_sop, min_data, max_data;
-	uint32_t max_rx_pkt_len;
+	uint32_t max_rx_pktlen;
 
 	/*
 	 * Representor uses a reserved PF queue. Translate representor
@@ -854,23 +854,23 @@ int enic_alloc_rq(struct enic *enic, uint16_t queue_idx,
 
 	mbuf_size = (uint16_t)(rte_pktmbuf_data_room_size(mp) -
 			       RTE_PKTMBUF_HEADROOM);
-	/* max_rx_pkt_len includes the ethernet header and CRC. */
-	max_rx_pkt_len = enic->rte_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	/* max_rx_pktlen includes the ethernet header and CRC. */
+	max_rx_pktlen = enic_mtu_to_max_rx_pktlen(enic->rte_dev->data->mtu);
 
 	if (enic->rte_dev->data->dev_conf.rxmode.offloads &
 	    DEV_RX_OFFLOAD_SCATTER) {
 		dev_info(enic, "Rq %u Scatter rx mode enabled\n", queue_idx);
 		/* ceil((max pkt len)/mbuf_size) */
-		mbufs_per_pkt = (max_rx_pkt_len + mbuf_size - 1) / mbuf_size;
+		mbufs_per_pkt = (max_rx_pktlen + mbuf_size - 1) / mbuf_size;
 	} else {
 		dev_info(enic, "Scatter rx mode disabled\n");
 		mbufs_per_pkt = 1;
-		if (max_rx_pkt_len > mbuf_size) {
+		if (max_rx_pktlen > mbuf_size) {
 			dev_warning(enic, "The maximum Rx packet size (%u) is"
 				    " larger than the mbuf size (%u), and"
 				    " scatter is disabled. Larger packets will"
 				    " be truncated.\n",
-				    max_rx_pkt_len, mbuf_size);
+				    max_rx_pktlen, mbuf_size);
 		}
 	}
 
@@ -879,16 +879,15 @@ int enic_alloc_rq(struct enic *enic, uint16_t queue_idx,
 		rq_sop->data_queue_enable = 1;
 		rq_data->in_use = 1;
 		/*
-		 * HW does not directly support rxmode.max_rx_pkt_len. HW always
+		 * HW does not directly support MTU. HW always
 		 * receives packet sizes up to the "max" MTU.
 		 * If not using scatter, we can achieve the effect of dropping
 		 * larger packets by reducing the size of posted buffers.
 		 * See enic_alloc_rx_queue_mbufs().
 		 */
-		if (max_rx_pkt_len <
-		    enic_mtu_to_max_rx_pktlen(enic->max_mtu)) {
-			dev_warning(enic, "rxmode.max_rx_pkt_len is ignored"
-				    " when scatter rx mode is in use.\n");
+		if (enic->rte_dev->data->mtu < enic->max_mtu) {
+			dev_warning(enic,
+				"mtu is ignored when scatter rx mode is in use.\n");
 		}
 	} else {
 		dev_info(enic, "Rq %u Scatter rx mode not being used\n",
@@ -931,7 +930,7 @@ int enic_alloc_rq(struct enic *enic, uint16_t queue_idx,
 	if (mbufs_per_pkt > 1) {
 		dev_info(enic, "For max packet size %u and mbuf size %u valid"
 			 " rx descriptor range is %u to %u\n",
-			 max_rx_pkt_len, mbuf_size, min_sop + min_data,
+			 max_rx_pktlen, mbuf_size, min_sop + min_data,
 			 max_sop + max_data);
 	}
 	dev_info(enic, "Using %d rx descriptors (sop %d, data %d)\n",
@@ -1634,11 +1633,6 @@ int enic_set_mtu(struct enic *enic, uint16_t new_mtu)
 			"MTU (%u) is greater than value configured in NIC (%u)\n",
 			new_mtu, config_mtu);
 
-	/* Update the MTU and maximum packet length */
-	eth_dev->data->mtu = new_mtu;
-	eth_dev->data->dev_conf.rxmode.max_rx_pkt_len =
-		enic_mtu_to_max_rx_pktlen(new_mtu);
-
 	/*
 	 * If the device has not started (enic_enable), nothing to do.
 	 * Later, enic_enable() will set up RQs reflecting the new maximum
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 7075d69022c4..0e25dfdd4ce3 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -757,7 +757,7 @@ fm10k_dev_rx_init(struct rte_eth_dev *dev)
 				FM10K_SRRCTL_LOOPBACK_SUPPRESS);
 
 		/* It adds dual VLAN length for supporting dual VLAN */
-		if ((dev->data->dev_conf.rxmode.max_rx_pkt_len +
+		if ((dev->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN +
 				2 * FM10K_VLAN_TAG_SIZE) > buf_size ||
 			rxq->offloads & DEV_RX_OFFLOAD_SCATTER) {
 			uint32_t reg;
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index cd4dad8588f3..aef8adc2e1e0 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -315,19 +315,19 @@ static int hinic_dev_configure(struct rte_eth_dev *dev)
 		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
 
 	/* mtu size is 256~9600 */
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len < HINIC_MIN_FRAME_SIZE ||
-	    dev->data->dev_conf.rxmode.max_rx_pkt_len >
-	    HINIC_MAX_JUMBO_FRAME_SIZE) {
+	if (HINIC_MTU_TO_PKTLEN(dev->data->dev_conf.rxmode.mtu) <
+			HINIC_MIN_FRAME_SIZE ||
+	    HINIC_MTU_TO_PKTLEN(dev->data->dev_conf.rxmode.mtu) >
+			HINIC_MAX_JUMBO_FRAME_SIZE) {
 		PMD_DRV_LOG(ERR,
-			"Max rx pkt len out of range, get max_rx_pkt_len:%d, "
+			"Packet length out of range, get packet length:%d, "
 			"expect between %d and %d",
-			dev->data->dev_conf.rxmode.max_rx_pkt_len,
+			HINIC_MTU_TO_PKTLEN(dev->data->dev_conf.rxmode.mtu),
 			HINIC_MIN_FRAME_SIZE, HINIC_MAX_JUMBO_FRAME_SIZE);
 		return -EINVAL;
 	}
 
-	nic_dev->mtu_size =
-		HINIC_PKTLEN_TO_MTU(dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	nic_dev->mtu_size = dev->data->dev_conf.rxmode.mtu;
 
 	/* rss template */
 	err = hinic_config_mq_mode(dev, TRUE);
@@ -1534,7 +1534,6 @@ static void hinic_deinit_mac_addr(struct rte_eth_dev *eth_dev)
 static int hinic_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 {
 	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
-	uint32_t frame_size;
 	int ret = 0;
 
 	PMD_DRV_LOG(INFO, "Set port mtu, port_id: %d, mtu: %d, max_pkt_len: %d",
@@ -1552,16 +1551,13 @@ static int hinic_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		return ret;
 	}
 
-	/* update max frame size */
-	frame_size = HINIC_MTU_TO_PKTLEN(mtu);
-	if (frame_size > HINIC_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 			~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	nic_dev->mtu_size = mtu;
 
 	return ret;
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index cabf73ffbc7c..81cad6e4305f 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -2366,41 +2366,6 @@ hns3_init_ring_with_vector(struct hns3_hw *hw)
 	return 0;
 }
 
-static int
-hns3_refresh_mtu(struct rte_eth_dev *dev, struct rte_eth_conf *conf)
-{
-	struct hns3_adapter *hns = dev->data->dev_private;
-	struct hns3_hw *hw = &hns->hw;
-	uint32_t max_rx_pkt_len;
-	uint16_t mtu;
-	int ret;
-
-	if (!(conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME))
-		return 0;
-
-	/*
-	 * If jumbo frames are enabled, MTU needs to be refreshed
-	 * according to the maximum RX packet length.
-	 */
-	max_rx_pkt_len = conf->rxmode.max_rx_pkt_len;
-	if (max_rx_pkt_len > HNS3_MAX_FRAME_LEN ||
-	    max_rx_pkt_len <= HNS3_DEFAULT_FRAME_LEN) {
-		hns3_err(hw, "maximum Rx packet length must be greater than %u "
-			 "and no more than %u when jumbo frame enabled.",
-			 (uint16_t)HNS3_DEFAULT_FRAME_LEN,
-			 (uint16_t)HNS3_MAX_FRAME_LEN);
-		return -EINVAL;
-	}
-
-	mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(max_rx_pkt_len);
-	ret = hns3_dev_mtu_set(dev, mtu);
-	if (ret)
-		return ret;
-	dev->data->mtu = mtu;
-
-	return 0;
-}
-
 static int
 hns3_setup_dcb(struct rte_eth_dev *dev)
 {
@@ -2515,8 +2480,8 @@ hns3_dev_configure(struct rte_eth_dev *dev)
 			goto cfg_err;
 	}
 
-	ret = hns3_refresh_mtu(dev, conf);
-	if (ret)
+	ret = hns3_dev_mtu_set(dev, conf->rxmode.mtu);
+	if (ret != 0)
 		goto cfg_err;
 
 	ret = hns3_mbuf_dyn_rx_timestamp_register(dev, conf);
@@ -2611,7 +2576,7 @@ hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	}
 
 	rte_spinlock_lock(&hw->lock);
-	is_jumbo_frame = frame_size > HNS3_DEFAULT_FRAME_LEN ? true : false;
+	is_jumbo_frame = mtu > RTE_ETHER_MTU ? true : false;
 	frame_size = RTE_MAX(frame_size, HNS3_DEFAULT_FRAME_LEN);
 
 	/*
@@ -2632,7 +2597,6 @@ hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	rte_spinlock_unlock(&hw->lock);
 
 	return 0;
diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c
index 8d9b7979c806..0b5db486f8d6 100644
--- a/drivers/net/hns3/hns3_ethdev_vf.c
+++ b/drivers/net/hns3/hns3_ethdev_vf.c
@@ -784,8 +784,6 @@ hns3vf_dev_configure(struct rte_eth_dev *dev)
 	uint16_t nb_rx_q = dev->data->nb_rx_queues;
 	uint16_t nb_tx_q = dev->data->nb_tx_queues;
 	struct rte_eth_rss_conf rss_conf;
-	uint32_t max_rx_pkt_len;
-	uint16_t mtu;
 	bool gro_en;
 	int ret;
 
@@ -825,28 +823,9 @@ hns3vf_dev_configure(struct rte_eth_dev *dev)
 			goto cfg_err;
 	}
 
-	/*
-	 * If jumbo frames are enabled, MTU needs to be refreshed
-	 * according to the maximum RX packet length.
-	 */
-	if (conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		max_rx_pkt_len = conf->rxmode.max_rx_pkt_len;
-		if (max_rx_pkt_len > HNS3_MAX_FRAME_LEN ||
-		    max_rx_pkt_len <= HNS3_DEFAULT_FRAME_LEN) {
-			hns3_err(hw, "maximum Rx packet length must be greater "
-				 "than %u and less than %u when jumbo frame enabled.",
-				 (uint16_t)HNS3_DEFAULT_FRAME_LEN,
-				 (uint16_t)HNS3_MAX_FRAME_LEN);
-			ret = -EINVAL;
-			goto cfg_err;
-		}
-
-		mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(max_rx_pkt_len);
-		ret = hns3vf_dev_mtu_set(dev, mtu);
-		if (ret)
-			goto cfg_err;
-		dev->data->mtu = mtu;
-	}
+	ret = hns3vf_dev_mtu_set(dev, conf->rxmode.mtu);
+	if (ret != 0)
+		goto cfg_err;
 
 	ret = hns3vf_dev_configure_vlan(dev);
 	if (ret)
@@ -935,7 +914,6 @@ hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 						~DEV_RX_OFFLOAD_JUMBO_FRAME;
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	rte_spinlock_unlock(&hw->lock);
 
 	return 0;
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index 6b77672aa1b4..74263e33d39a 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1747,18 +1747,18 @@ hns3_rxq_conf_runtime_check(struct hns3_hw *hw, uint16_t buf_size,
 				uint16_t nb_desc)
 {
 	struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
-	struct rte_eth_rxmode *rxmode = &hw->data->dev_conf.rxmode;
 	eth_rx_burst_t pkt_burst = dev->rx_pkt_burst;
+	uint32_t frame_size = dev->data->mtu + HNS3_ETH_OVERHEAD;
 	uint16_t min_vec_bds;
 
 	/*
 	 * HNS3 hardware network engine set scattered as default. If the driver
 	 * is not work in scattered mode and the pkts greater than buf_size
-	 * but smaller than max_rx_pkt_len will be distributed to multiple BDs.
+	 * but smaller than frame size will be distributed to multiple BDs.
 	 * Driver cannot handle this situation.
 	 */
-	if (!hw->data->scattered_rx && rxmode->max_rx_pkt_len > buf_size) {
-		hns3_err(hw, "max_rx_pkt_len is not allowed to be set greater "
+	if (!hw->data->scattered_rx && frame_size > buf_size) {
+		hns3_err(hw, "frame size is not allowed to be set greater "
 			     "than rx_buf_len if scattered is off.");
 		return -EINVAL;
 	}
@@ -1970,7 +1970,7 @@ hns3_rx_scattered_calc(struct rte_eth_dev *dev)
 	}
 
 	if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_SCATTER ||
-	    dev_conf->rxmode.max_rx_pkt_len > hw->rx_buf_len)
+	    dev->data->mtu + HNS3_ETH_OVERHEAD > hw->rx_buf_len)
 		dev->data->scattered_rx = true;
 }
 
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 1fc3d897a804..cfefef4746e9 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -11423,14 +11423,10 @@ i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EBUSY;
 	}
 
-	if (frame_size > I40E_ETH_MAX_LEN)
-		dev_data->dev_conf.rxmode.offloads |=
-			DEV_RX_OFFLOAD_JUMBO_FRAME;
+	if (mtu > RTE_ETHER_MTU)
+		dev_data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
-		dev_data->dev_conf.rxmode.offloads &=
-			~DEV_RX_OFFLOAD_JUMBO_FRAME;
-
-	dev_data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+		dev_data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
 	return ret;
 }
diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 807e1a4133d3..2dc6b3720f02 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -2925,8 +2925,8 @@ i40e_rx_queue_config(struct i40e_rx_queue *rxq)
 	}
 
 	rxq->max_pkt_len =
-		RTE_MIN((uint32_t)(hw->func_caps.rx_buf_chain_len *
-			rxq->rx_buf_len), data->dev_conf.rxmode.max_rx_pkt_len);
+		RTE_MIN(hw->func_caps.rx_buf_chain_len * rxq->rx_buf_len,
+				data->mtu + I40E_ETH_OVERHEAD);
 	if (data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
 		if (rxq->max_pkt_len <= I40E_ETH_MAX_LEN ||
 			rxq->max_pkt_len > I40E_FRAME_SIZE_MAX) {
diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index 5a5a7f59e152..0eabce275d92 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -576,13 +576,14 @@ iavf_init_rxq(struct rte_eth_dev *dev, struct iavf_rx_queue *rxq)
 	struct iavf_hw *hw = IAVF_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct rte_eth_dev_data *dev_data = dev->data;
 	uint16_t buf_size, max_pkt_len;
+	uint32_t frame_size = dev->data->mtu + IAVF_ETH_OVERHEAD;
 
 	buf_size = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 
 	/* Calculate the maximum packet length allowed */
 	max_pkt_len = RTE_MIN((uint32_t)
 			rxq->rx_buf_len * IAVF_MAX_CHAINED_RX_BUFFERS,
-			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			frame_size);
 
 	/* Check if the jumbo frame and maximum packet length are set
 	 * correctly.
@@ -839,7 +840,7 @@ iavf_dev_start(struct rte_eth_dev *dev)
 
 	adapter->stopped = 0;
 
-	vf->max_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	vf->max_pkt_len = dev->data->mtu + IAVF_ETH_OVERHEAD;
 	vf->num_queue_pairs = RTE_MAX(dev->data->nb_rx_queues,
 				      dev->data->nb_tx_queues);
 	num_queue_pairs = vf->num_queue_pairs;
@@ -1472,15 +1473,13 @@ iavf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EBUSY;
 	}
 
-	if (frame_size > IAVF_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |=
 				DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &=
 				~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	return ret;
 }
 
diff --git a/drivers/net/ice/ice_dcf_ethdev.c b/drivers/net/ice/ice_dcf_ethdev.c
index 91f655874287..6e59f8c71c65 100644
--- a/drivers/net/ice/ice_dcf_ethdev.c
+++ b/drivers/net/ice/ice_dcf_ethdev.c
@@ -66,9 +66,8 @@ ice_dcf_init_rxq(struct rte_eth_dev *dev, struct ice_rx_queue *rxq)
 	buf_size = rte_pktmbuf_data_room_size(rxq->mp) - RTE_PKTMBUF_HEADROOM;
 	rxq->rx_hdr_len = 0;
 	rxq->rx_buf_len = RTE_ALIGN(buf_size, (1 << ICE_RLAN_CTX_DBUF_S));
-	max_pkt_len = RTE_MIN((uint32_t)
-			      ICE_SUPPORT_CHAIN_NUM * rxq->rx_buf_len,
-			      dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	max_pkt_len = RTE_MIN(ICE_SUPPORT_CHAIN_NUM * rxq->rx_buf_len,
+			      dev->data->mtu + ICE_ETH_OVERHEAD);
 
 	/* Check if the jumbo frame and maximum packet length are set
 	 * correctly.
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 65e43a18f9f2..ebe9834e6097 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -3603,8 +3603,8 @@ ice_dev_start(struct rte_eth_dev *dev)
 	pf->adapter_stopped = false;
 
 	/* Set the max frame size to default value*/
-	max_frame_size = pf->dev_data->dev_conf.rxmode.max_rx_pkt_len ?
-		pf->dev_data->dev_conf.rxmode.max_rx_pkt_len :
+	max_frame_size = pf->dev_data->mtu ?
+		pf->dev_data->mtu + ICE_ETH_OVERHEAD :
 		ICE_FRAME_SIZE_MAX;
 
 	/* Set the max frame size to HW*/
@@ -3992,14 +3992,10 @@ ice_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EBUSY;
 	}
 
-	if (frame_size > ICE_ETH_MAX_LEN)
-		dev_data->dev_conf.rxmode.offloads |=
-			DEV_RX_OFFLOAD_JUMBO_FRAME;
+	if (mtu > RTE_ETHER_MTU)
+		dev_data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
-		dev_data->dev_conf.rxmode.offloads &=
-			~DEV_RX_OFFLOAD_JUMBO_FRAME;
-
-	dev_data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+		dev_data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
 	return 0;
 }
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index 7a2220daa448..b2c73eadcf6d 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -271,15 +271,16 @@ ice_program_hw_rx_queue(struct ice_rx_queue *rxq)
 	uint32_t rxdid = ICE_RXDID_COMMS_OVS;
 	uint32_t regval;
 	struct ice_adapter *ad = rxq->vsi->adapter;
+	uint32_t frame_size = dev_data->mtu + ICE_ETH_OVERHEAD;
 
 	/* Set buffer size as the head split is disabled. */
 	buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rxq->mp) -
 			      RTE_PKTMBUF_HEADROOM);
 	rxq->rx_hdr_len = 0;
 	rxq->rx_buf_len = RTE_ALIGN(buf_size, (1 << ICE_RLAN_CTX_DBUF_S));
-	rxq->max_pkt_len = RTE_MIN((uint32_t)
-				   ICE_SUPPORT_CHAIN_NUM * rxq->rx_buf_len,
-				   dev_data->dev_conf.rxmode.max_rx_pkt_len);
+	rxq->max_pkt_len =
+		RTE_MIN((uint32_t)ICE_SUPPORT_CHAIN_NUM * rxq->rx_buf_len,
+			frame_size);
 
 	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
 		if (rxq->max_pkt_len <= ICE_ETH_MAX_LEN ||
@@ -385,11 +386,8 @@ ice_program_hw_rx_queue(struct ice_rx_queue *rxq)
 		return -EINVAL;
 	}
 
-	buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rxq->mp) -
-			      RTE_PKTMBUF_HEADROOM);
-
 	/* Check if scattered RX needs to be used. */
-	if (rxq->max_pkt_len > buf_size)
+	if (frame_size > buf_size)
 		dev_data->scattered_rx = 1;
 
 	rxq->qrx_tail = hw->hw_addr + QRX_TAIL(rxq->reg_idx);
diff --git a/drivers/net/igc/igc_ethdev.c b/drivers/net/igc/igc_ethdev.c
index 0e41c85d2963..1ebe7a02ce57 100644
--- a/drivers/net/igc/igc_ethdev.c
+++ b/drivers/net/igc/igc_ethdev.c
@@ -20,13 +20,6 @@
 
 #define IGC_INTEL_VENDOR_ID		0x8086
 
-/*
- * The overhead from MTU to max frame size.
- * Considering VLAN so tag needs to be counted.
- */
-#define IGC_ETH_OVERHEAD		(RTE_ETHER_HDR_LEN + \
-					RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE)
-
 #define IGC_FC_PAUSE_TIME		0x0680
 #define IGC_LINK_UPDATE_CHECK_TIMEOUT	90  /* 9s */
 #define IGC_LINK_UPDATE_CHECK_INTERVAL	100 /* ms */
@@ -1602,21 +1595,15 @@ eth_igc_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 
 	/* switch to jumbo mode if needed */
 	if (mtu > RTE_ETHER_MTU) {
-		dev->data->dev_conf.rxmode.offloads |=
-			DEV_RX_OFFLOAD_JUMBO_FRAME;
+		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 		rctl |= IGC_RCTL_LPE;
 	} else {
-		dev->data->dev_conf.rxmode.offloads &=
-			~DEV_RX_OFFLOAD_JUMBO_FRAME;
+		dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 		rctl &= ~IGC_RCTL_LPE;
 	}
 	IGC_WRITE_REG(hw, IGC_RCTL, rctl);
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
-	IGC_WRITE_REG(hw, IGC_RLPML,
-			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	IGC_WRITE_REG(hw, IGC_RLPML, frame_size);
 
 	return 0;
 }
@@ -2486,6 +2473,7 @@ static int
 igc_vlan_hw_extend_disable(struct rte_eth_dev *dev)
 {
 	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+	uint32_t frame_size = dev->data->mtu + IGC_ETH_OVERHEAD;
 	uint32_t ctrl_ext;
 
 	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
@@ -2494,23 +2482,14 @@ igc_vlan_hw_extend_disable(struct rte_eth_dev *dev)
 	if ((ctrl_ext & IGC_CTRL_EXT_EXT_VLAN) == 0)
 		return 0;
 
-	if ((dev->data->dev_conf.rxmode.offloads &
-			DEV_RX_OFFLOAD_JUMBO_FRAME) == 0)
-		goto write_ext_vlan;
-
 	/* Update maximum packet length */
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len <
-		RTE_ETHER_MIN_MTU + VLAN_TAG_SIZE) {
+	if (frame_size < RTE_ETHER_MIN_MTU + VLAN_TAG_SIZE) {
 		PMD_DRV_LOG(ERR, "Maximum packet length %u error, min is %u",
-			dev->data->dev_conf.rxmode.max_rx_pkt_len,
-			VLAN_TAG_SIZE + RTE_ETHER_MIN_MTU);
+			frame_size, VLAN_TAG_SIZE + RTE_ETHER_MIN_MTU);
 		return -EINVAL;
 	}
-	dev->data->dev_conf.rxmode.max_rx_pkt_len -= VLAN_TAG_SIZE;
-	IGC_WRITE_REG(hw, IGC_RLPML,
-		dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	IGC_WRITE_REG(hw, IGC_RLPML, frame_size - VLAN_TAG_SIZE);
 
-write_ext_vlan:
 	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext & ~IGC_CTRL_EXT_EXT_VLAN);
 	return 0;
 }
@@ -2519,6 +2498,7 @@ static int
 igc_vlan_hw_extend_enable(struct rte_eth_dev *dev)
 {
 	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
+	uint32_t frame_size = dev->data->mtu + IGC_ETH_OVERHEAD;
 	uint32_t ctrl_ext;
 
 	ctrl_ext = IGC_READ_REG(hw, IGC_CTRL_EXT);
@@ -2527,23 +2507,14 @@ igc_vlan_hw_extend_enable(struct rte_eth_dev *dev)
 	if (ctrl_ext & IGC_CTRL_EXT_EXT_VLAN)
 		return 0;
 
-	if ((dev->data->dev_conf.rxmode.offloads &
-			DEV_RX_OFFLOAD_JUMBO_FRAME) == 0)
-		goto write_ext_vlan;
-
 	/* Update maximum packet length */
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len >
-		MAX_RX_JUMBO_FRAME_SIZE - VLAN_TAG_SIZE) {
+	if (frame_size > MAX_RX_JUMBO_FRAME_SIZE) {
 		PMD_DRV_LOG(ERR, "Maximum packet length %u error, max is %u",
-			dev->data->dev_conf.rxmode.max_rx_pkt_len +
-			VLAN_TAG_SIZE, MAX_RX_JUMBO_FRAME_SIZE);
+			frame_size, MAX_RX_JUMBO_FRAME_SIZE);
 		return -EINVAL;
 	}
-	dev->data->dev_conf.rxmode.max_rx_pkt_len += VLAN_TAG_SIZE;
-	IGC_WRITE_REG(hw, IGC_RLPML,
-		dev->data->dev_conf.rxmode.max_rx_pkt_len);
+	IGC_WRITE_REG(hw, IGC_RLPML, frame_size);
 
-write_ext_vlan:
 	IGC_WRITE_REG(hw, IGC_CTRL_EXT, ctrl_ext | IGC_CTRL_EXT_EXT_VLAN);
 	return 0;
 }
diff --git a/drivers/net/igc/igc_ethdev.h b/drivers/net/igc/igc_ethdev.h
index 7b6c209df3b6..b3473b5b1646 100644
--- a/drivers/net/igc/igc_ethdev.h
+++ b/drivers/net/igc/igc_ethdev.h
@@ -35,6 +35,13 @@ extern "C" {
 #define IGC_HKEY_REG_SIZE		IGC_DEFAULT_REG_SIZE
 #define IGC_HKEY_SIZE			(IGC_HKEY_REG_SIZE * IGC_HKEY_MAX_INDEX)
 
+/*
+ * The overhead from MTU to max frame size.
+ * Considering VLAN so tag needs to be counted.
+ */
+#define IGC_ETH_OVERHEAD		(RTE_ETHER_HDR_LEN + \
+					RTE_ETHER_CRC_LEN + VLAN_TAG_SIZE * 2)
+
 /*
  * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be
  * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary.
diff --git a/drivers/net/igc/igc_txrx.c b/drivers/net/igc/igc_txrx.c
index 7dee1bb0fa5f..45d76f3ec321 100644
--- a/drivers/net/igc/igc_txrx.c
+++ b/drivers/net/igc/igc_txrx.c
@@ -1081,7 +1081,7 @@ igc_rx_init(struct rte_eth_dev *dev)
 	struct igc_rx_queue *rxq;
 	struct igc_hw *hw = IGC_DEV_PRIVATE_HW(dev);
 	uint64_t offloads = dev->data->dev_conf.rxmode.offloads;
-	uint32_t max_rx_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	uint32_t max_rx_pktlen;
 	uint32_t rctl;
 	uint32_t rxcsum;
 	uint16_t buf_size;
@@ -1099,17 +1099,17 @@ igc_rx_init(struct rte_eth_dev *dev)
 	IGC_WRITE_REG(hw, IGC_RCTL, rctl & ~IGC_RCTL_EN);
 
 	/* Configure support of jumbo frames, if any. */
-	if (offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+	if ((offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) != 0)
 		rctl |= IGC_RCTL_LPE;
-
-		/*
-		 * Set maximum packet length by default, and might be updated
-		 * together with enabling/disabling dual VLAN.
-		 */
-		IGC_WRITE_REG(hw, IGC_RLPML, max_rx_pkt_len);
-	} else {
+	else
 		rctl &= ~IGC_RCTL_LPE;
-	}
+
+	max_rx_pktlen = dev->data->mtu + IGC_ETH_OVERHEAD;
+	/*
+	 * Set maximum packet length by default, and might be updated
+	 * together with enabling/disabling dual VLAN.
+	 */
+	IGC_WRITE_REG(hw, IGC_RLPML, max_rx_pktlen);
 
 	/* Configure and enable each RX queue. */
 	rctl_bsize = 0;
@@ -1168,7 +1168,7 @@ igc_rx_init(struct rte_eth_dev *dev)
 					IGC_SRRCTL_BSIZEPKT_SHIFT);
 
 			/* It adds dual VLAN length for supporting dual VLAN */
-			if (max_rx_pkt_len + 2 * VLAN_TAG_SIZE > buf_size)
+			if (max_rx_pktlen > buf_size)
 				dev->data->scattered_rx = 1;
 		} else {
 			/*
diff --git a/drivers/net/ionic/ionic_ethdev.c b/drivers/net/ionic/ionic_ethdev.c
index 344c076f309a..d5d610c80bcd 100644
--- a/drivers/net/ionic/ionic_ethdev.c
+++ b/drivers/net/ionic/ionic_ethdev.c
@@ -343,25 +343,15 @@ static int
 ionic_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 {
 	struct ionic_lif *lif = IONIC_ETH_DEV_TO_LIF(eth_dev);
-	uint32_t max_frame_size;
 	int err;
 
 	IONIC_PRINT_CALL();
 
 	/*
 	 * Note: mtu check against IONIC_MIN_MTU, IONIC_MAX_MTU
-	 * is done by the the API.
+	 * is done by the API.
 	 */
 
-	/*
-	 * Max frame size is MTU + Ethernet header + VLAN + QinQ
-	 * (plus ETHER_CRC_LEN if the adapter is able to keep CRC)
-	 */
-	max_frame_size = mtu + RTE_ETHER_HDR_LEN + 4 + 4;
-
-	if (eth_dev->data->dev_conf.rxmode.max_rx_pkt_len < max_frame_size)
-		return -EINVAL;
-
 	err = ionic_lif_change_mtu(lif, mtu);
 	if (err)
 		return err;
diff --git a/drivers/net/ionic/ionic_rxtx.c b/drivers/net/ionic/ionic_rxtx.c
index 67631a5813b7..4d16a39c6b6d 100644
--- a/drivers/net/ionic/ionic_rxtx.c
+++ b/drivers/net/ionic/ionic_rxtx.c
@@ -771,7 +771,7 @@ ionic_rx_clean(struct ionic_rx_qcq *rxq,
 	struct ionic_rxq_comp *cq_desc = &cq_desc_base[cq_desc_index];
 	struct rte_mbuf *rxm, *rxm_seg;
 	uint32_t max_frame_size =
-		rxq->qcq.lif->eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+		rxq->qcq.lif->eth_dev->data->mtu + RTE_ETHER_HDR_LEN;
 	uint64_t pkt_flags = 0;
 	uint32_t pkt_type;
 	struct ionic_rx_stats *stats = &rxq->stats;
@@ -1014,7 +1014,7 @@ ionic_rx_fill(struct ionic_rx_qcq *rxq, uint32_t len)
 int __rte_cold
 ionic_dev_rx_queue_start(struct rte_eth_dev *eth_dev, uint16_t rx_queue_id)
 {
-	uint32_t frame_size = eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	uint32_t frame_size = eth_dev->data->mtu + RTE_ETHER_HDR_LEN;
 	uint8_t *rx_queue_state = eth_dev->data->rx_queue_state;
 	struct ionic_rx_qcq *rxq;
 	int err;
@@ -1128,7 +1128,7 @@ ionic_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 {
 	struct ionic_rx_qcq *rxq = rx_queue;
 	uint32_t frame_size =
-		rxq->qcq.lif->eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
+		rxq->qcq.lif->eth_dev->data->mtu + RTE_ETHER_HDR_LEN;
 	struct ionic_rx_service service_cb_arg;
 
 	service_cb_arg.rx_pkts = rx_pkts;
diff --git a/drivers/net/ipn3ke/ipn3ke_representor.c b/drivers/net/ipn3ke/ipn3ke_representor.c
index 694435a4ae24..0d1aaa6449b9 100644
--- a/drivers/net/ipn3ke/ipn3ke_representor.c
+++ b/drivers/net/ipn3ke/ipn3ke_representor.c
@@ -2791,14 +2791,10 @@ ipn3ke_rpst_mtu_set(struct rte_eth_dev *ethdev, uint16_t mtu)
 		return -EBUSY;
 	}
 
-	if (frame_size > IPN3KE_ETH_MAX_LEN)
-		dev_data->dev_conf.rxmode.offloads |=
-			(uint64_t)(DEV_RX_OFFLOAD_JUMBO_FRAME);
+	if (mtu > RTE_ETHER_MTU)
+		dev_data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
-		dev_data->dev_conf.rxmode.offloads &=
-			(uint64_t)(~DEV_RX_OFFLOAD_JUMBO_FRAME);
-
-	dev_data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+		dev_data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
 	if (rpst->i40e_pf_eth) {
 		ret = rpst->i40e_pf_eth->dev_ops->mtu_set(rpst->i40e_pf_eth,
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index a127dc0d869a..0ceb42a5cd9e 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -5167,7 +5167,6 @@ ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	struct ixgbe_hw *hw;
 	struct rte_eth_dev_info dev_info;
 	uint32_t frame_size = mtu + IXGBE_ETH_OVERHEAD;
-	struct rte_eth_dev_data *dev_data = dev->data;
 	int ret;
 
 	ret = ixgbe_dev_info_get(dev, &dev_info);
@@ -5181,9 +5180,9 @@ ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	/* If device is started, refuse mtu that requires the support of
 	 * scattered packets when this feature has not been enabled before.
 	 */
-	if (dev_data->dev_started && !dev_data->scattered_rx &&
-	    (frame_size + 2 * IXGBE_VLAN_TAG_SIZE >
-	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
+	if (dev->data->dev_started && !dev->data->scattered_rx &&
+	    frame_size + 2 * IXGBE_VLAN_TAG_SIZE >
+			dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM) {
 		PMD_INIT_LOG(ERR, "Stop port first.");
 		return -EINVAL;
 	}
@@ -5192,23 +5191,18 @@ ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
 
 	/* switch to jumbo mode if needed */
-	if (frame_size > IXGBE_ETH_MAX_LEN) {
-		dev->data->dev_conf.rxmode.offloads |=
-			DEV_RX_OFFLOAD_JUMBO_FRAME;
+	if (mtu > RTE_ETHER_MTU) {
+		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
 	} else {
-		dev->data->dev_conf.rxmode.offloads &=
-			~DEV_RX_OFFLOAD_JUMBO_FRAME;
+		dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
 	}
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	maxfrs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
 	maxfrs &= 0x0000FFFF;
-	maxfrs |= (dev->data->dev_conf.rxmode.max_rx_pkt_len << 16);
+	maxfrs |= (frame_size << 16);
 	IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, maxfrs);
 
 	return 0;
@@ -6080,12 +6074,10 @@ ixgbe_set_queue_rate_limit(struct rte_eth_dev *dev,
 	 * set as 0x4.
 	 */
 	if ((rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) &&
-	    (rxmode->max_rx_pkt_len >= IXGBE_MAX_JUMBO_FRAME_SIZE))
-		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM,
-			IXGBE_MMW_SIZE_JUMBO_FRAME);
+	    (dev->data->mtu + IXGBE_ETH_OVERHEAD >= IXGBE_MAX_JUMBO_FRAME_SIZE))
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, IXGBE_MMW_SIZE_JUMBO_FRAME);
 	else
-		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM,
-			IXGBE_MMW_SIZE_DEFAULT);
+		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, IXGBE_MMW_SIZE_DEFAULT);
 
 	/* Set RTTBCNRC of queue X */
 	IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, queue_idx);
@@ -6357,8 +6349,7 @@ ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 
 	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-	if (mtu < RTE_ETHER_MIN_MTU ||
-			max_frame > RTE_ETHER_MAX_JUMBO_FRAME_LEN)
+	if (mtu < RTE_ETHER_MIN_MTU || max_frame > RTE_ETHER_MAX_JUMBO_FRAME_LEN)
 		return -EINVAL;
 
 	/* If device is started, refuse mtu that requires the support of
@@ -6366,7 +6357,7 @@ ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	 */
 	if (dev_data->dev_started && !dev_data->scattered_rx &&
 	    (max_frame + 2 * IXGBE_VLAN_TAG_SIZE >
-	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
+			dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)) {
 		PMD_INIT_LOG(ERR, "Stop port first.");
 		return -EINVAL;
 	}
@@ -6383,8 +6374,6 @@ ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	if (ixgbevf_rlpml_set_vf(hw, max_frame))
 		return -EINVAL;
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame;
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_pf.c b/drivers/net/ixgbe/ixgbe_pf.c
index a1529b4d5659..4ceb5bf322d8 100644
--- a/drivers/net/ixgbe/ixgbe_pf.c
+++ b/drivers/net/ixgbe/ixgbe_pf.c
@@ -573,8 +573,7 @@ ixgbe_set_vf_lpe(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
 			  * if PF has jumbo frames enabled which means legacy
 			  * VFs are disabled.
 			  */
-			if (dev->data->dev_conf.rxmode.max_rx_pkt_len >
-			    IXGBE_ETH_MAX_LEN)
+			if (dev->data->mtu > RTE_ETHER_MTU)
 				break;
 			/* fall through */
 		default:
@@ -584,8 +583,7 @@ ixgbe_set_vf_lpe(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
 			 * legacy VFs.
 			 */
 			if (max_frame > IXGBE_ETH_MAX_LEN ||
-			    dev->data->dev_conf.rxmode.max_rx_pkt_len >
-			    IXGBE_ETH_MAX_LEN)
+					dev->data->mtu > RTE_ETHER_MTU)
 				return -1;
 			break;
 		}
diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
index 349180e7c17f..d31cf9e0a7c9 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx.c
@@ -5065,6 +5065,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 	uint16_t buf_size;
 	uint16_t i;
 	struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
+	uint32_t frame_size = dev->data->mtu + IXGBE_ETH_OVERHEAD;
 	int rc;
 
 	PMD_INIT_FUNC_TRACE();
@@ -5100,7 +5101,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
 		maxfrs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
 		maxfrs &= 0x0000FFFF;
-		maxfrs |= (rx_conf->max_rx_pkt_len << 16);
+		maxfrs |= (frame_size << 16);
 		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, maxfrs);
 	} else
 		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
@@ -5174,8 +5175,7 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 				       IXGBE_SRRCTL_BSIZEPKT_SHIFT);
 
 		/* It adds dual VLAN length for supporting dual VLAN */
-		if (dev->data->dev_conf.rxmode.max_rx_pkt_len +
-					    2 * IXGBE_VLAN_TAG_SIZE > buf_size)
+		if (frame_size + 2 * IXGBE_VLAN_TAG_SIZE > buf_size)
 			dev->data->scattered_rx = 1;
 		if (rxq->offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
 			rx_conf->offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
@@ -5655,6 +5655,7 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
 	struct ixgbe_hw     *hw;
 	struct ixgbe_rx_queue *rxq;
 	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
+	uint32_t frame_size = dev->data->mtu + IXGBE_ETH_OVERHEAD;
 	uint64_t bus_addr;
 	uint32_t srrctl, psrtype = 0;
 	uint16_t buf_size;
@@ -5691,10 +5692,9 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
 	 * ixgbevf_rlpml_set_vf even if jumbo frames are not used. This way,
 	 * VF packets received can work in all cases.
 	 */
-	if (ixgbevf_rlpml_set_vf(hw,
-	    (uint16_t)dev->data->dev_conf.rxmode.max_rx_pkt_len)) {
+	if (ixgbevf_rlpml_set_vf(hw, frame_size) != 0) {
 		PMD_INIT_LOG(ERR, "Set max packet length to %d failed.",
-			     dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			     frame_size);
 		return -EINVAL;
 	}
 
@@ -5753,8 +5753,7 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
 
 		if (rxmode->offloads & DEV_RX_OFFLOAD_SCATTER ||
 		    /* It adds dual VLAN length for supporting dual VLAN */
-		    (rxmode->max_rx_pkt_len +
-				2 * IXGBE_VLAN_TAG_SIZE) > buf_size) {
+		    (frame_size + 2 * IXGBE_VLAN_TAG_SIZE) > buf_size) {
 			if (!dev->data->scattered_rx)
 				PMD_INIT_LOG(DEBUG, "forcing scatter mode");
 			dev->data->scattered_rx = 1;
diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c
index dbdab188e962..f235653718fc 100644
--- a/drivers/net/liquidio/lio_ethdev.c
+++ b/drivers/net/liquidio/lio_ethdev.c
@@ -435,7 +435,6 @@ lio_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 {
 	struct lio_device *lio_dev = LIO_DEV(eth_dev);
 	uint16_t pf_mtu = lio_dev->linfo.link.s.mtu;
-	uint32_t frame_len = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
 	struct lio_dev_ctrl_cmd ctrl_cmd;
 	struct lio_ctrl_pkt ctrl_pkt;
 
@@ -481,16 +480,13 @@ lio_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 		return -1;
 	}
 
-	if (frame_len > LIO_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		eth_dev->data->dev_conf.rxmode.offloads |=
 			DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		eth_dev->data->dev_conf.rxmode.offloads &=
 			~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_len;
-	eth_dev->data->mtu = mtu;
-
 	return 0;
 }
 
@@ -1402,8 +1398,6 @@ lio_sync_link_state_check(void *eth_dev)
 static int
 lio_dev_start(struct rte_eth_dev *eth_dev)
 {
-	uint16_t mtu;
-	uint32_t frame_len = eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
 	struct lio_device *lio_dev = LIO_DEV(eth_dev);
 	uint16_t timeout = LIO_MAX_CMD_TIMEOUT;
 	int ret = 0;
@@ -1446,15 +1440,9 @@ lio_dev_start(struct rte_eth_dev *eth_dev)
 		goto dev_mtu_set_error;
 	}
 
-	mtu = (uint16_t)(frame_len - RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN);
-	if (mtu < RTE_ETHER_MIN_MTU)
-		mtu = RTE_ETHER_MIN_MTU;
-
-	if (eth_dev->data->mtu != mtu) {
-		ret = lio_dev_mtu_set(eth_dev, mtu);
-		if (ret)
-			goto dev_mtu_set_error;
-	}
+	ret = lio_dev_mtu_set(eth_dev, eth_dev->data->mtu);
+	if (ret != 0)
+		goto dev_mtu_set_error;
 
 	return 0;
 
diff --git a/drivers/net/mlx4/mlx4_rxq.c b/drivers/net/mlx4/mlx4_rxq.c
index 2b75c07fad75..1801d87334a1 100644
--- a/drivers/net/mlx4/mlx4_rxq.c
+++ b/drivers/net/mlx4/mlx4_rxq.c
@@ -753,6 +753,7 @@ mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	int ret;
 	uint32_t crc_present;
 	uint64_t offloads;
+	uint32_t max_rx_pktlen;
 
 	offloads = conf->offloads | dev->data->dev_conf.rxmode.offloads;
 
@@ -829,13 +830,11 @@ mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	dev->data->rx_queues[idx] = rxq;
 	/* Enable scattered packets support for this queue if necessary. */
 	MLX4_ASSERT(mb_len >= RTE_PKTMBUF_HEADROOM);
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len <=
-	    (mb_len - RTE_PKTMBUF_HEADROOM)) {
+	max_rx_pktlen = dev->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+	if (max_rx_pktlen <= (mb_len - RTE_PKTMBUF_HEADROOM)) {
 		;
 	} else if (offloads & DEV_RX_OFFLOAD_SCATTER) {
-		uint32_t size =
-			RTE_PKTMBUF_HEADROOM +
-			dev->data->dev_conf.rxmode.max_rx_pkt_len;
+		uint32_t size = RTE_PKTMBUF_HEADROOM + max_rx_pktlen;
 		uint32_t sges_n;
 
 		/*
@@ -847,21 +846,19 @@ mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		/* Make sure sges_n did not overflow. */
 		size = mb_len * (1 << rxq->sges_n);
 		size -= RTE_PKTMBUF_HEADROOM;
-		if (size < dev->data->dev_conf.rxmode.max_rx_pkt_len) {
+		if (size < max_rx_pktlen) {
 			rte_errno = EOVERFLOW;
 			ERROR("%p: too many SGEs (%u) needed to handle"
 			      " requested maximum packet size %u",
 			      (void *)dev,
-			      1 << sges_n,
-			      dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			      1 << sges_n, max_rx_pktlen);
 			goto error;
 		}
 	} else {
 		WARN("%p: the requested maximum Rx packet size (%u) is"
 		     " larger than a single mbuf (%u) and scattered"
 		     " mode has not been requested",
-		     (void *)dev,
-		     dev->data->dev_conf.rxmode.max_rx_pkt_len,
+		     (void *)dev, max_rx_pktlen,
 		     mb_len - RTE_PKTMBUF_HEADROOM);
 	}
 	DEBUG("%p: maximum number of segments per packet: %u",
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index b68443bed509..0655965c0fb9 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1327,10 +1327,11 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	uint64_t offloads = conf->offloads |
 			   dev->data->dev_conf.rxmode.offloads;
 	unsigned int lro_on_queue = !!(offloads & DEV_RX_OFFLOAD_TCP_LRO);
-	unsigned int max_rx_pkt_len = lro_on_queue ?
+	unsigned int max_rx_pktlen = lro_on_queue ?
 			dev->data->dev_conf.rxmode.max_lro_pkt_size :
-			dev->data->dev_conf.rxmode.max_rx_pkt_len;
-	unsigned int non_scatter_min_mbuf_size = max_rx_pkt_len +
+			dev->data->mtu + (unsigned int)RTE_ETHER_HDR_LEN +
+				RTE_ETHER_CRC_LEN;
+	unsigned int non_scatter_min_mbuf_size = max_rx_pktlen +
 							RTE_PKTMBUF_HEADROOM;
 	unsigned int max_lro_size = 0;
 	unsigned int first_mb_free_size = mb_len - RTE_PKTMBUF_HEADROOM;
@@ -1369,7 +1370,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	 * needed to handle max size packets, replace zero length
 	 * with the buffer length from the pool.
 	 */
-	tail_len = max_rx_pkt_len;
+	tail_len = max_rx_pktlen;
 	do {
 		struct mlx5_eth_rxseg *hw_seg =
 					&tmpl->rxq.rxseg[tmpl->rxq.rxseg_n];
@@ -1407,7 +1408,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 				"port %u too many SGEs (%u) needed to handle"
 				" requested maximum packet size %u, the maximum"
 				" supported are %u", dev->data->port_id,
-				tmpl->rxq.rxseg_n, max_rx_pkt_len,
+				tmpl->rxq.rxseg_n, max_rx_pktlen,
 				MLX5_MAX_RXQ_NSEG);
 			rte_errno = ENOTSUP;
 			goto error;
@@ -1432,7 +1433,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		DRV_LOG(ERR, "port %u Rx queue %u: Scatter offload is not"
 			" configured and no enough mbuf space(%u) to contain "
 			"the maximum RX packet length(%u) with head-room(%u)",
-			dev->data->port_id, idx, mb_len, max_rx_pkt_len,
+			dev->data->port_id, idx, mb_len, max_rx_pktlen,
 			RTE_PKTMBUF_HEADROOM);
 		rte_errno = ENOSPC;
 		goto error;
@@ -1451,7 +1452,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	 * following conditions are met:
 	 *  - MPRQ is enabled.
 	 *  - The number of descs is more than the number of strides.
-	 *  - max_rx_pkt_len plus overhead is less than the max size
+	 *  - max_rx_pktlen plus overhead is less than the max size
 	 *    of a stride or mprq_stride_size is specified by a user.
 	 *    Need to make sure that there are enough strides to encap
 	 *    the maximum packet size in case mprq_stride_size is set.
@@ -1475,7 +1476,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 				!!(offloads & DEV_RX_OFFLOAD_SCATTER);
 		tmpl->rxq.mprq_max_memcpy_len = RTE_MIN(first_mb_free_size,
 				config->mprq.max_memcpy_len);
-		max_lro_size = RTE_MIN(max_rx_pkt_len,
+		max_lro_size = RTE_MIN(max_rx_pktlen,
 				       (1u << tmpl->rxq.strd_num_n) *
 				       (1u << tmpl->rxq.strd_sz_n));
 		DRV_LOG(DEBUG,
@@ -1484,9 +1485,9 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 			dev->data->port_id, idx,
 			tmpl->rxq.strd_num_n, tmpl->rxq.strd_sz_n);
 	} else if (tmpl->rxq.rxseg_n == 1) {
-		MLX5_ASSERT(max_rx_pkt_len <= first_mb_free_size);
+		MLX5_ASSERT(max_rx_pktlen <= first_mb_free_size);
 		tmpl->rxq.sges_n = 0;
-		max_lro_size = max_rx_pkt_len;
+		max_lro_size = max_rx_pktlen;
 	} else if (offloads & DEV_RX_OFFLOAD_SCATTER) {
 		unsigned int sges_n;
 
@@ -1508,13 +1509,13 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 				"port %u too many SGEs (%u) needed to handle"
 				" requested maximum packet size %u, the maximum"
 				" supported are %u", dev->data->port_id,
-				1 << sges_n, max_rx_pkt_len,
+				1 << sges_n, max_rx_pktlen,
 				1u << MLX5_MAX_LOG_RQ_SEGS);
 			rte_errno = ENOTSUP;
 			goto error;
 		}
 		tmpl->rxq.sges_n = sges_n;
-		max_lro_size = max_rx_pkt_len;
+		max_lro_size = max_rx_pktlen;
 	}
 	if (config->mprq.enabled && !mlx5_rxq_mprq_enabled(&tmpl->rxq))
 		DRV_LOG(WARNING,
diff --git a/drivers/net/mvneta/mvneta_ethdev.c b/drivers/net/mvneta/mvneta_ethdev.c
index f51bc2258fe1..d6497c366696 100644
--- a/drivers/net/mvneta/mvneta_ethdev.c
+++ b/drivers/net/mvneta/mvneta_ethdev.c
@@ -126,10 +126,6 @@ mvneta_dev_configure(struct rte_eth_dev *dev)
 		return -EINVAL;
 	}
 
-	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
-				 MRVL_NETA_ETH_HDRS_LEN;
-
 	if (dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_MULTI_SEGS)
 		priv->multiseg = 1;
 
@@ -261,9 +257,6 @@ mvneta_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EINVAL;
 	}
 
-	dev->data->mtu = mtu;
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = mru - MV_MH_SIZE;
-
 	if (!priv->ppio)
 		/* It is OK. New MTU will be set later on mvneta_dev_start */
 		return 0;
diff --git a/drivers/net/mvneta/mvneta_rxtx.c b/drivers/net/mvneta/mvneta_rxtx.c
index 2d61930382cb..9836bb071a82 100644
--- a/drivers/net/mvneta/mvneta_rxtx.c
+++ b/drivers/net/mvneta/mvneta_rxtx.c
@@ -708,19 +708,18 @@ mvneta_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	struct mvneta_priv *priv = dev->data->dev_private;
 	struct mvneta_rxq *rxq;
 	uint32_t frame_size, buf_size = rte_pktmbuf_data_room_size(mp);
-	uint32_t max_rx_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	uint32_t max_rx_pktlen = dev->data->mtu + RTE_ETHER_HDR_LEN;
 
 	frame_size = buf_size - RTE_PKTMBUF_HEADROOM - MVNETA_PKT_EFFEC_OFFS;
 
-	if (frame_size < max_rx_pkt_len) {
+	if (frame_size < max_rx_pktlen) {
 		MVNETA_LOG(ERR,
 			"Mbuf size must be increased to %u bytes to hold up "
 			"to %u bytes of data.",
-			buf_size + max_rx_pkt_len - frame_size,
-			max_rx_pkt_len);
-		dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-		MVNETA_LOG(INFO, "Setting max rx pkt len to %u",
-			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			max_rx_pktlen + buf_size - frame_size,
+			max_rx_pktlen);
+		dev->data->mtu = frame_size - RTE_ETHER_HDR_LEN;
+		MVNETA_LOG(INFO, "Setting MTU to %u", dev->data->mtu);
 	}
 
 	if (dev->data->rx_queues[idx]) {
diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index 65d011300a97..44761b695a8d 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -496,16 +496,11 @@ mrvl_dev_configure(struct rte_eth_dev *dev)
 		return -EINVAL;
 	}
 
-	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
-				 MRVL_PP2_ETH_HDRS_LEN;
-		if (dev->data->mtu > priv->max_mtu) {
-			MRVL_LOG(ERR, "inherit MTU %u from max_rx_pkt_len %u is larger than max_mtu %u\n",
-				 dev->data->mtu,
-				 dev->data->dev_conf.rxmode.max_rx_pkt_len,
-				 priv->max_mtu);
-			return -EINVAL;
-		}
+	if (dev->data->dev_conf.rxmode.mtu > priv->max_mtu) {
+		MRVL_LOG(ERR, "MTU %u is larger than max_mtu %u\n",
+			 dev->data->dev_conf.rxmode.mtu,
+			 priv->max_mtu);
+		return -EINVAL;
 	}
 
 	if (dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_MULTI_SEGS)
@@ -595,9 +590,6 @@ mrvl_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EINVAL;
 	}
 
-	dev->data->mtu = mtu;
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = mru - MV_MH_SIZE;
-
 	if (!priv->ppio)
 		return 0;
 
@@ -1994,7 +1986,7 @@ mrvl_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 	struct mrvl_priv *priv = dev->data->dev_private;
 	struct mrvl_rxq *rxq;
 	uint32_t frame_size, buf_size = rte_pktmbuf_data_room_size(mp);
-	uint32_t max_rx_pkt_len = dev->data->dev_conf.rxmode.max_rx_pkt_len;
+	uint32_t max_rx_pktlen = dev->data->mtu + RTE_ETHER_HDR_LEN;
 	int ret, tc, inq;
 	uint64_t offloads;
 
@@ -2009,17 +2001,15 @@ mrvl_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		return -EFAULT;
 	}
 
-	frame_size = buf_size - RTE_PKTMBUF_HEADROOM -
-		     MRVL_PKT_EFFEC_OFFS + RTE_ETHER_CRC_LEN;
-	if (frame_size < max_rx_pkt_len) {
+	frame_size = buf_size - RTE_PKTMBUF_HEADROOM - MRVL_PKT_EFFEC_OFFS;
+	if (frame_size < max_rx_pktlen) {
 		MRVL_LOG(WARNING,
 			"Mbuf size must be increased to %u bytes to hold up "
 			"to %u bytes of data.",
-			buf_size + max_rx_pkt_len - frame_size,
-			max_rx_pkt_len);
-		dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-		MRVL_LOG(INFO, "Setting max rx pkt len to %u",
-			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			max_rx_pktlen + buf_size - frame_size,
+			max_rx_pktlen);
+		dev->data->mtu = frame_size - RTE_ETHER_HDR_LEN;
+		MRVL_LOG(INFO, "Setting MTU to %u", dev->data->mtu);
 	}
 
 	if (dev->data->rx_queues[idx]) {
diff --git a/drivers/net/nfp/nfp_common.c b/drivers/net/nfp/nfp_common.c
index 4395a09c597d..928b4983a07a 100644
--- a/drivers/net/nfp/nfp_common.c
+++ b/drivers/net/nfp/nfp_common.c
@@ -370,7 +370,7 @@ nfp_check_offloads(struct rte_eth_dev *dev)
 	}
 
 	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		hw->mtu = rxmode->max_rx_pkt_len;
+		hw->mtu = dev->data->mtu;
 
 	if (txmode->offloads & DEV_TX_OFFLOAD_VLAN_INSERT)
 		ctrl |= NFP_NET_CFG_CTRL_TXVLAN;
@@ -963,16 +963,13 @@ nfp_net_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	}
 
 	/* switch to jumbo mode if needed */
-	if ((uint32_t)mtu > RTE_ETHER_MTU)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = (uint32_t)mtu;
-
 	/* writing to configuration space */
-	nn_cfg_writel(hw, NFP_NET_CFG_MTU, (uint32_t)mtu);
+	nn_cfg_writel(hw, NFP_NET_CFG_MTU, mtu);
 
 	hw->mtu = mtu;
 
diff --git a/drivers/net/octeontx/octeontx_ethdev.c b/drivers/net/octeontx/octeontx_ethdev.c
index 7c91494f0e28..10151a748d5d 100644
--- a/drivers/net/octeontx/octeontx_ethdev.c
+++ b/drivers/net/octeontx/octeontx_ethdev.c
@@ -552,13 +552,11 @@ octeontx_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 	if (rc)
 		return rc;
 
-	if (frame_size > OCCTX_L2_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		nic->rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		nic->rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	/* Update max_rx_pkt_len */
-	data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
 	octeontx_log_info("Received pkt beyond  maxlen %d will be dropped",
 			  frame_size);
 
@@ -581,7 +579,7 @@ octeontx_recheck_rx_offloads(struct octeontx_rxq *rxq)
 	buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
 
 	/* Setup scatter mode if needed by jumbo */
-	if (data->dev_conf.rxmode.max_rx_pkt_len > buffsz) {
+	if (data->mtu > buffsz) {
 		nic->rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
 		nic->rx_offload_flags |= octeontx_rx_offload_flags(eth_dev);
 		nic->tx_offload_flags |= octeontx_tx_offload_flags(eth_dev);
@@ -593,8 +591,8 @@ octeontx_recheck_rx_offloads(struct octeontx_rxq *rxq)
 	evdev_priv->rx_offload_flags = nic->rx_offload_flags;
 	evdev_priv->tx_offload_flags = nic->tx_offload_flags;
 
-	/* Setup MTU based on max_rx_pkt_len */
-	nic->mtu = data->dev_conf.rxmode.max_rx_pkt_len - OCCTX_L2_OVERHEAD;
+	/* Setup MTU */
+	nic->mtu = data->mtu;
 
 	return 0;
 }
@@ -615,7 +613,7 @@ octeontx_dev_start(struct rte_eth_dev *dev)
 		octeontx_recheck_rx_offloads(rxq);
 	}
 
-	/* Setting up the mtu based on max_rx_pkt_len */
+	/* Setting up the mtu */
 	ret = octeontx_dev_mtu_set(dev, nic->mtu);
 	if (ret) {
 		octeontx_log_err("Failed to set default MTU size %d", ret);
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index d576bc698926..2779741352ca 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -913,7 +913,7 @@ otx2_nix_enable_mseg_on_jumbo(struct otx2_eth_rxq *rxq)
 	mbp_priv = rte_mempool_get_priv(rxq->pool);
 	buffsz = mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM;
 
-	if (eth_dev->data->dev_conf.rxmode.max_rx_pkt_len > buffsz) {
+	if (eth_dev->data->mtu + (uint32_t)NIX_L2_OVERHEAD > buffsz) {
 		dev->rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
 		dev->tx_offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
 
diff --git a/drivers/net/octeontx2/otx2_ethdev_ops.c b/drivers/net/octeontx2/otx2_ethdev_ops.c
index 552e6bd43d2b..cf7804157198 100644
--- a/drivers/net/octeontx2/otx2_ethdev_ops.c
+++ b/drivers/net/octeontx2/otx2_ethdev_ops.c
@@ -59,14 +59,11 @@ otx2_nix_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
 	if (rc)
 		return rc;
 
-	if (frame_size > NIX_L2_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	/* Update max_rx_pkt_len */
-	data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-
 	return rc;
 }
 
@@ -75,7 +72,6 @@ otx2_nix_recalc_mtu(struct rte_eth_dev *eth_dev)
 {
 	struct rte_eth_dev_data *data = eth_dev->data;
 	struct otx2_eth_rxq *rxq;
-	uint16_t mtu;
 	int rc;
 
 	rxq = data->rx_queues[0];
@@ -83,10 +79,7 @@ otx2_nix_recalc_mtu(struct rte_eth_dev *eth_dev)
 	/* Setup scatter mode if needed by jumbo */
 	otx2_nix_enable_mseg_on_jumbo(rxq);
 
-	/* Setup MTU based on max_rx_pkt_len */
-	mtu = data->dev_conf.rxmode.max_rx_pkt_len - NIX_L2_OVERHEAD;
-
-	rc = otx2_nix_mtu_set(eth_dev, mtu);
+	rc = otx2_nix_mtu_set(eth_dev, data->mtu);
 	if (rc)
 		otx2_err("Failed to set default MTU size %d", rc);
 
diff --git a/drivers/net/pfe/pfe_ethdev.c b/drivers/net/pfe/pfe_ethdev.c
index 4c7f568bf42d..91fe39d3ce55 100644
--- a/drivers/net/pfe/pfe_ethdev.c
+++ b/drivers/net/pfe/pfe_ethdev.c
@@ -670,16 +670,11 @@ pfe_link_up(struct rte_eth_dev *dev)
 static int
 pfe_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 {
-	int ret;
 	struct pfe_eth_priv_s *priv = dev->data->dev_private;
 	uint16_t frame_size = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
 
 	/*TODO Support VLAN*/
-	ret = gemac_set_rx(priv->EMAC_baseaddr, frame_size);
-	if (!ret)
-		dev->data->mtu = mtu;
-
-	return ret;
+	return gemac_set_rx(priv->EMAC_baseaddr, frame_size);
 }
 
 /* pfe_eth_enet_addr_byte_mac
diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index fd8c62a1826b..a1cf913dc8ed 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -1312,12 +1312,6 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 			return -ENOMEM;
 	}
 
-	/* If jumbo enabled adjust MTU */
-	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		eth_dev->data->mtu =
-			eth_dev->data->dev_conf.rxmode.max_rx_pkt_len -
-			RTE_ETHER_HDR_LEN - QEDE_ETH_OVERHEAD;
-
 	if (rxmode->offloads & DEV_RX_OFFLOAD_SCATTER)
 		eth_dev->data->scattered_rx = 1;
 
@@ -2315,7 +2309,6 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
 	struct rte_eth_dev_info dev_info = {0};
 	struct qede_fastpath *fp;
-	uint32_t max_rx_pkt_len;
 	uint32_t frame_size;
 	uint16_t bufsz;
 	bool restart = false;
@@ -2327,8 +2320,8 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		DP_ERR(edev, "Error during getting ethernet device info\n");
 		return rc;
 	}
-	max_rx_pkt_len = mtu + QEDE_MAX_ETHER_HDR_LEN;
-	frame_size = max_rx_pkt_len;
+
+	frame_size = mtu + QEDE_MAX_ETHER_HDR_LEN;
 	if (mtu < RTE_ETHER_MIN_MTU || frame_size > dev_info.max_rx_pktlen) {
 		DP_ERR(edev, "MTU %u out of range, %u is maximum allowable\n",
 		       mtu, dev_info.max_rx_pktlen - RTE_ETHER_HDR_LEN -
@@ -2368,7 +2361,7 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 			fp->rxq->rx_buf_size = rc;
 		}
 	}
-	if (frame_size > QEDE_ETH_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
@@ -2378,9 +2371,6 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		dev->data->dev_started = 1;
 	}
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = max_rx_pkt_len;
-
 	return 0;
 }
 
diff --git a/drivers/net/qede/qede_rxtx.c b/drivers/net/qede/qede_rxtx.c
index 35cde561ba59..c2263787b4ec 100644
--- a/drivers/net/qede/qede_rxtx.c
+++ b/drivers/net/qede/qede_rxtx.c
@@ -224,7 +224,7 @@ qede_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qid,
 	struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
 	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
 	struct qede_rx_queue *rxq;
-	uint16_t max_rx_pkt_len;
+	uint16_t max_rx_pktlen;
 	uint16_t bufsz;
 	int rc;
 
@@ -243,21 +243,21 @@ qede_rx_queue_setup(struct rte_eth_dev *dev, uint16_t qid,
 		dev->data->rx_queues[qid] = NULL;
 	}
 
-	max_rx_pkt_len = (uint16_t)rxmode->max_rx_pkt_len;
+	max_rx_pktlen = dev->data->mtu + RTE_ETHER_HDR_LEN;
 
 	/* Fix up RX buffer size */
 	bufsz = (uint16_t)rte_pktmbuf_data_room_size(mp) - RTE_PKTMBUF_HEADROOM;
 	/* cache align the mbuf size to simplfy rx_buf_size calculation */
 	bufsz = QEDE_FLOOR_TO_CACHE_LINE_SIZE(bufsz);
 	if ((rxmode->offloads & DEV_RX_OFFLOAD_SCATTER)	||
-	    (max_rx_pkt_len + QEDE_ETH_OVERHEAD) > bufsz) {
+	    (max_rx_pktlen + QEDE_ETH_OVERHEAD) > bufsz) {
 		if (!dev->data->scattered_rx) {
 			DP_INFO(edev, "Forcing scatter-gather mode\n");
 			dev->data->scattered_rx = 1;
 		}
 	}
 
-	rc = qede_calc_rx_buf_size(dev, bufsz, max_rx_pkt_len);
+	rc = qede_calc_rx_buf_size(dev, bufsz, max_rx_pktlen);
 	if (rc < 0)
 		return rc;
 
diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index 9dc5e5b3a3d4..09146f741952 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -1067,15 +1067,13 @@ sfc_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 
 	/*
 	 * The driver does not use it, but other PMDs update jumbo frame
-	 * flag and max_rx_pkt_len when MTU is set.
+	 * flag when MTU is set.
 	 */
 	if (mtu > RTE_ETHER_MTU) {
 		struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
 		rxmode->offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	}
 
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = sa->port.pdu;
-
 	sfc_adapter_unlock(sa);
 
 	sfc_log_init(sa, "done");
diff --git a/drivers/net/sfc/sfc_port.c b/drivers/net/sfc/sfc_port.c
index adb2b2cb8175..22f74735db08 100644
--- a/drivers/net/sfc/sfc_port.c
+++ b/drivers/net/sfc/sfc_port.c
@@ -383,14 +383,10 @@ sfc_port_configure(struct sfc_adapter *sa)
 {
 	const struct rte_eth_dev_data *dev_data = sa->eth_dev->data;
 	struct sfc_port *port = &sa->port;
-	const struct rte_eth_rxmode *rxmode = &dev_data->dev_conf.rxmode;
 
 	sfc_log_init(sa, "entry");
 
-	if (rxmode->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		port->pdu = rxmode->max_rx_pkt_len;
-	else
-		port->pdu = EFX_MAC_PDU(dev_data->mtu);
+	port->pdu = EFX_MAC_PDU(dev_data->mtu);
 
 	return 0;
 }
diff --git a/drivers/net/tap/rte_eth_tap.c b/drivers/net/tap/rte_eth_tap.c
index 046f17669d03..e4f1ad45219e 100644
--- a/drivers/net/tap/rte_eth_tap.c
+++ b/drivers/net/tap/rte_eth_tap.c
@@ -1627,13 +1627,8 @@ tap_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 {
 	struct pmd_internals *pmd = dev->data->dev_private;
 	struct ifreq ifr = { .ifr_mtu = mtu };
-	int err = 0;
 
-	err = tap_ioctl(pmd, SIOCSIFMTU, &ifr, 1, LOCAL_AND_REMOTE);
-	if (!err)
-		dev->data->mtu = mtu;
-
-	return err;
+	return tap_ioctl(pmd, SIOCSIFMTU, &ifr, 1, LOCAL_AND_REMOTE);
 }
 
 static int
diff --git a/drivers/net/thunderx/nicvf_ethdev.c b/drivers/net/thunderx/nicvf_ethdev.c
index 5502f1ee6939..1000d9855ad3 100644
--- a/drivers/net/thunderx/nicvf_ethdev.c
+++ b/drivers/net/thunderx/nicvf_ethdev.c
@@ -176,7 +176,7 @@ nicvf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		(frame_size + 2 * VLAN_TAG_SIZE > buffsz * NIC_HW_MAX_SEGS))
 		return -EINVAL;
 
-	if (frame_size > NIC_HW_L2_MAX_LEN)
+	if (mtu > RTE_ETHER_MTU)
 		rxmode->offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		rxmode->offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
@@ -184,8 +184,6 @@ nicvf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	if (nicvf_mbox_update_hw_max_frs(nic, mtu))
 		return -EINVAL;
 
-	/* Update max_rx_pkt_len */
-	rxmode->max_rx_pkt_len = mtu + RTE_ETHER_HDR_LEN;
 	nic->mtu = mtu;
 
 	for (i = 0; i < nic->sqs_count; i++)
@@ -1724,16 +1722,13 @@ nicvf_dev_start(struct rte_eth_dev *dev)
 	}
 
 	/* Setup scatter mode if needed by jumbo */
-	if (dev->data->dev_conf.rxmode.max_rx_pkt_len +
-					    2 * VLAN_TAG_SIZE > buffsz)
+	if (dev->data->mtu + (uint32_t)NIC_HW_L2_OVERHEAD + 2 * VLAN_TAG_SIZE > buffsz)
 		dev->data->scattered_rx = 1;
 	if ((rx_conf->offloads & DEV_RX_OFFLOAD_SCATTER) != 0)
 		dev->data->scattered_rx = 1;
 
-	/* Setup MTU based on max_rx_pkt_len or default */
-	mtu = dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME ?
-		dev->data->dev_conf.rxmode.max_rx_pkt_len
-			-  RTE_ETHER_HDR_LEN : RTE_ETHER_MTU;
+	/* Setup MTU */
+	mtu = dev->data->mtu;
 
 	if (nicvf_dev_set_mtu(dev, mtu)) {
 		PMD_INIT_LOG(ERR, "Failed to set default mtu size");
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index b267da462bcb..9427ac738f1b 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -3486,8 +3486,11 @@ txgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EINVAL;
 	}
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+	/* switch to jumbo mode if needed */
+	if (mtu > RTE_ETHER_MTU)
+		dev->data->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	else
+		dev->data->dev_conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
 	if (hw->mode)
 		wr32m(hw, TXGBE_FRMSZ, TXGBE_FRMSZ_MAX_MASK,
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
index 112567eecca4..16485b3c2d2d 100644
--- a/drivers/net/txgbe/txgbe_ethdev.h
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -55,6 +55,10 @@
 #define TXGBE_5TUPLE_MAX_PRI            7
 #define TXGBE_5TUPLE_MIN_PRI            1
 
+
+/* The overhead from MTU to max frame size. */
+#define TXGBE_ETH_OVERHEAD (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN)
+
 #define TXGBE_RSS_OFFLOAD_ALL ( \
 	ETH_RSS_IPV4 | \
 	ETH_RSS_NONFRAG_IPV4_TCP | \
diff --git a/drivers/net/txgbe/txgbe_ethdev_vf.c b/drivers/net/txgbe/txgbe_ethdev_vf.c
index 896da8a88770..43dc0ed39b75 100644
--- a/drivers/net/txgbe/txgbe_ethdev_vf.c
+++ b/drivers/net/txgbe/txgbe_ethdev_vf.c
@@ -1128,8 +1128,6 @@ txgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	if (txgbevf_rlpml_set_vf(hw, max_frame))
 		return -EINVAL;
 
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame;
 	return 0;
 }
 
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
index b6339fe50b44..3af1d19e3079 100644
--- a/drivers/net/txgbe/txgbe_rxtx.c
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -4305,13 +4305,8 @@ txgbe_dev_rx_init(struct rte_eth_dev *dev)
 	/*
 	 * Configure jumbo frame support, if any.
 	 */
-	if (rx_conf->offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		wr32m(hw, TXGBE_FRMSZ, TXGBE_FRMSZ_MAX_MASK,
-			TXGBE_FRMSZ_MAX(rx_conf->max_rx_pkt_len));
-	} else {
-		wr32m(hw, TXGBE_FRMSZ, TXGBE_FRMSZ_MAX_MASK,
-			TXGBE_FRMSZ_MAX(TXGBE_FRAME_SIZE_DFT));
-	}
+	wr32m(hw, TXGBE_FRMSZ, TXGBE_FRMSZ_MAX_MASK,
+		TXGBE_FRMSZ_MAX(dev->data->mtu + TXGBE_ETH_OVERHEAD));
 
 	/*
 	 * If loopback mode is configured, set LPBK bit.
@@ -4373,8 +4368,8 @@ txgbe_dev_rx_init(struct rte_eth_dev *dev)
 		wr32(hw, TXGBE_RXCFG(rxq->reg_idx), srrctl);
 
 		/* It adds dual VLAN length for supporting dual VLAN */
-		if (dev->data->dev_conf.rxmode.max_rx_pkt_len +
-					    2 * TXGBE_VLAN_TAG_SIZE > buf_size)
+		if (dev->data->mtu + TXGBE_ETH_OVERHEAD +
+				2 * TXGBE_VLAN_TAG_SIZE > buf_size)
 			dev->data->scattered_rx = 1;
 		if (rxq->offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
 			rx_conf->offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
@@ -4826,9 +4821,9 @@ txgbevf_dev_rx_init(struct rte_eth_dev *dev)
 	 * VF packets received can work in all cases.
 	 */
 	if (txgbevf_rlpml_set_vf(hw,
-	    (uint16_t)dev->data->dev_conf.rxmode.max_rx_pkt_len)) {
+	    (uint16_t)dev->data->mtu + TXGBE_ETH_OVERHEAD)) {
 		PMD_INIT_LOG(ERR, "Set max packet length to %d failed.",
-			     dev->data->dev_conf.rxmode.max_rx_pkt_len);
+			     dev->data->mtu + TXGBE_ETH_OVERHEAD);
 		return -EINVAL;
 	}
 
@@ -4890,7 +4885,7 @@ txgbevf_dev_rx_init(struct rte_eth_dev *dev)
 
 		if (rxmode->offloads & DEV_RX_OFFLOAD_SCATTER ||
 		    /* It adds dual VLAN length for supporting dual VLAN */
-		    (rxmode->max_rx_pkt_len +
+		    (dev->data->mtu + TXGBE_ETH_OVERHEAD +
 				2 * TXGBE_VLAN_TAG_SIZE) > buf_size) {
 			if (!dev->data->scattered_rx)
 				PMD_INIT_LOG(DEBUG, "forcing scatter mode");
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 6aa36b3f3942..e1b9066dcf5d 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -924,7 +924,6 @@ virtio_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	}
 
 	hw->max_rx_pkt_len = frame_size;
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = hw->max_rx_pkt_len;
 
 	return 0;
 }
@@ -2108,14 +2107,10 @@ virtio_dev_configure(struct rte_eth_dev *dev)
 			return ret;
 	}
 
-	if ((rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) &&
-	    (rxmode->max_rx_pkt_len > hw->max_mtu + ether_hdr_len))
+	if (rxmode->mtu > hw->max_mtu)
 		req_features &= ~(1ULL << VIRTIO_NET_F_MTU);
 
-	if (rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
-		hw->max_rx_pkt_len = rxmode->max_rx_pkt_len;
-	else
-		hw->max_rx_pkt_len = ether_hdr_len + dev->data->mtu;
+	hw->max_rx_pkt_len = ether_hdr_len + rxmode->mtu;
 
 	if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
 			   DEV_RX_OFFLOAD_TCP_CKSUM))
diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
index adbd40808396..68e3c13730ad 100644
--- a/examples/bbdev_app/main.c
+++ b/examples/bbdev_app/main.c
@@ -72,7 +72,6 @@ mbuf_input(struct rte_mbuf *mbuf)
 static const struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/examples/bond/main.c b/examples/bond/main.c
index 7adaa93cad5c..6352a715c0d9 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -116,7 +116,6 @@ static struct rte_mempool *mbuf_pool;
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.rx_adv_conf = {
diff --git a/examples/distributor/main.c b/examples/distributor/main.c
index d0f40a1fb4bc..8c4a8feec0c2 100644
--- a/examples/distributor/main.c
+++ b/examples/distributor/main.c
@@ -81,7 +81,6 @@ struct app_stats prev_app_stats;
 static const struct rte_eth_conf port_conf_default = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 	},
 	.txmode = {
 		.mq_mode = ETH_MQ_TX_NONE,
diff --git a/examples/eventdev_pipeline/pipeline_worker_generic.c b/examples/eventdev_pipeline/pipeline_worker_generic.c
index 5ed0dc73ec60..e26be8edf28f 100644
--- a/examples/eventdev_pipeline/pipeline_worker_generic.c
+++ b/examples/eventdev_pipeline/pipeline_worker_generic.c
@@ -284,7 +284,6 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	static const struct rte_eth_conf port_conf_default = {
 		.rxmode = {
 			.mq_mode = ETH_MQ_RX_RSS,
-			.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		},
 		.rx_adv_conf = {
 			.rss_conf = {
diff --git a/examples/eventdev_pipeline/pipeline_worker_tx.c b/examples/eventdev_pipeline/pipeline_worker_tx.c
index ab8c6d6a0dad..476b147bdfcc 100644
--- a/examples/eventdev_pipeline/pipeline_worker_tx.c
+++ b/examples/eventdev_pipeline/pipeline_worker_tx.c
@@ -615,7 +615,6 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	static const struct rte_eth_conf port_conf_default = {
 		.rxmode = {
 			.mq_mode = ETH_MQ_RX_RSS,
-			.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		},
 		.rx_adv_conf = {
 			.rss_conf = {
diff --git a/examples/flow_classify/flow_classify.c b/examples/flow_classify/flow_classify.c
index 65c1d85cf2fb..8a43f6ac0f92 100644
--- a/examples/flow_classify/flow_classify.c
+++ b/examples/flow_classify/flow_classify.c
@@ -59,14 +59,6 @@ static struct{
 } parm_config;
 const char cb_port_delim[] = ":";
 
-/* Ethernet ports configured with default settings using struct. 8< */
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-	},
-};
-/* >8 End of configuration of Ethernet ports. */
-
 /* Creation of flow classifier object. 8< */
 struct flow_classifier {
 	struct rte_flow_classifier *cls;
@@ -200,7 +192,7 @@ static struct rte_flow_attr attr;
 static inline int
 port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 {
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	struct rte_ether_addr addr;
 	const uint16_t rx_rings = 1, tx_rings = 1;
 	int retval;
@@ -211,6 +203,8 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	retval = rte_eth_dev_info_get(port, &dev_info);
 	if (retval != 0) {
 		printf("Error during getting device (port %u) info: %s\n",
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index ff36aa7f1e7b..ccfee585f850 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -820,7 +820,6 @@ port_init(uint16_t portid, struct rte_mempool *mbuf_pool, uint16_t nb_queues)
 	static const struct rte_eth_conf port_conf = {
 		.rxmode = {
 			.mq_mode = ETH_MQ_RX_RSS,
-			.max_rx_pkt_len = RTE_ETHER_MAX_LEN
 		},
 		.rx_adv_conf = {
 			.rss_conf = {
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index a7f40970f27f..754fee5a5780 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -146,7 +146,8 @@ struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
-		.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
+		.mtu = JUMBO_FRAME_MAX_SIZE - RTE_ETHER_HDR_LEN -
+			RTE_ETHER_CRC_LEN,
 		.split_hdr_size = 0,
 		.offloads = (DEV_RX_OFFLOAD_CHECKSUM |
 			     DEV_RX_OFFLOAD_SCATTER |
@@ -918,9 +919,9 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
-		local_port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
-		    dev_info.max_rx_pktlen,
-		    local_port_conf.rxmode.max_rx_pkt_len);
+		local_port_conf.rxmode.mtu = RTE_MIN(
+		    dev_info.max_mtu,
+		    local_port_conf.rxmode.mtu);
 
 		/* get the lcore_id for this port */
 		while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
@@ -963,8 +964,7 @@ main(int argc, char **argv)
 		}
 
 		/* set the mtu to the maximum received packet size */
-		ret = rte_eth_dev_set_mtu(portid,
-			local_port_conf.rxmode.max_rx_pkt_len - MTU_OVERHEAD);
+		ret = rte_eth_dev_set_mtu(portid, local_port_conf.rxmode.mtu);
 		if (ret < 0) {
 			printf("\n");
 			rte_exit(EXIT_FAILURE, "Set MTU failed: "
diff --git a/examples/ip_pipeline/link.c b/examples/ip_pipeline/link.c
index 16bcffe356bc..9ba02e687adb 100644
--- a/examples/ip_pipeline/link.c
+++ b/examples/ip_pipeline/link.c
@@ -46,7 +46,7 @@ static struct rte_eth_conf port_conf_default = {
 	.link_speeds = 0,
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = 9000, /* Jumbo frame max packet len */
+		.mtu = 9000 - (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN), /* Jumbo frame MTU */
 		.split_hdr_size = 0, /* Header split buffer size */
 	},
 	.rx_adv_conf = {
diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
index d611c7d01609..39e12fea47f4 100644
--- a/examples/ip_reassembly/main.c
+++ b/examples/ip_reassembly/main.c
@@ -162,7 +162,8 @@ static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode        = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
+		.mtu = JUMBO_FRAME_MAX_SIZE - RTE_ETHER_HDR_LEN -
+			RTE_ETHER_CRC_LEN,
 		.split_hdr_size = 0,
 		.offloads = (DEV_RX_OFFLOAD_CHECKSUM |
 			     DEV_RX_OFFLOAD_JUMBO_FRAME),
@@ -882,7 +883,8 @@ setup_queue_tbl(struct rx_queue *rxq, uint32_t lcore, uint32_t queue)
 
 	/* mbufs stored int the gragment table. 8< */
 	nb_mbuf = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST) * MAX_FRAG_NUM;
-	nb_mbuf *= (port_conf.rxmode.max_rx_pkt_len + BUF_SIZE - 1) / BUF_SIZE;
+	nb_mbuf *= (port_conf.rxmode.mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN
+			+ BUF_SIZE - 1) / BUF_SIZE;
 	nb_mbuf *= 2; /* ipv4 and ipv6 */
 	nb_mbuf += nb_rxd + nb_txd;
 
@@ -1054,9 +1056,9 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
-		local_port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
-		    dev_info.max_rx_pktlen,
-		    local_port_conf.rxmode.max_rx_pkt_len);
+		local_port_conf.rxmode.mtu = RTE_MIN(
+		    dev_info.max_mtu,
+		    local_port_conf.rxmode.mtu);
 
 		/* get the lcore_id for this port */
 		while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 7b01872c6f9f..a5dfca5a9a4b 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -235,7 +235,6 @@ static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode	= ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
@@ -2163,7 +2162,6 @@ cryptodevs_init(uint16_t req_queue_num)
 static void
 port_init(uint16_t portid, uint64_t req_rx_offloads, uint64_t req_tx_offloads)
 {
-	uint32_t frame_size;
 	struct rte_eth_dev_info dev_info;
 	struct rte_eth_txconf *txconf;
 	uint16_t nb_tx_queue, nb_rx_queue;
@@ -2211,10 +2209,9 @@ port_init(uint16_t portid, uint64_t req_rx_offloads, uint64_t req_tx_offloads)
 	printf("Creating queues: nb_rx_queue=%d nb_tx_queue=%u...\n",
 			nb_rx_queue, nb_tx_queue);
 
-	frame_size = MTU_TO_FRAMELEN(mtu_size);
-	if (frame_size > local_port_conf.rxmode.max_rx_pkt_len)
+	if (mtu_size > RTE_ETHER_MTU)
 		local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
-	local_port_conf.rxmode.max_rx_pkt_len = frame_size;
+	local_port_conf.rxmode.mtu = mtu_size;
 
 	if (multi_seg_required()) {
 		local_port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_SCATTER;
diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
index d10de30ddbae..e28035998e6c 100644
--- a/examples/ipv4_multicast/main.c
+++ b/examples/ipv4_multicast/main.c
@@ -110,7 +110,8 @@ static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
-		.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
+		.mtu = JUMBO_FRAME_MAX_SIZE - RTE_ETHER_HDR_LEN -
+			RTE_ETHER_CRC_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_JUMBO_FRAME,
 	},
@@ -715,9 +716,9 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
-		local_port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
-		    dev_info.max_rx_pktlen,
-		    local_port_conf.rxmode.max_rx_pkt_len);
+		local_port_conf.rxmode.mtu = RTE_MIN(
+		    dev_info.max_mtu,
+		    local_port_conf.rxmode.mtu);
 
 		/* get the lcore_id for this port */
 		while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 2a993a0ca460..62f6e42a9437 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -791,14 +791,12 @@ kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
 
 	memcpy(&conf, &port_conf, sizeof(conf));
 	/* Set new MTU */
-	if (new_mtu > RTE_ETHER_MAX_LEN)
+	if (new_mtu > RTE_ETHER_MTU)
 		conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
 	else
 		conf.rxmode.offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
 
-	/* mtu + length of header + length of FCS = max pkt length */
-	conf.rxmode.max_rx_pkt_len = new_mtu + KNI_ENET_HEADER_SIZE +
-							KNI_ENET_FCS_SIZE;
+	conf.rxmode.mtu = new_mtu;
 	ret = rte_eth_dev_configure(port_id, 1, 1, &conf);
 	if (ret < 0) {
 		RTE_LOG(ERR, APP, "Fail to reconfigure port %d\n", port_id);
diff --git a/examples/l2fwd-cat/l2fwd-cat.c b/examples/l2fwd-cat/l2fwd-cat.c
index 9b3e324efb23..d9cf00c9dfc7 100644
--- a/examples/l2fwd-cat/l2fwd-cat.c
+++ b/examples/l2fwd-cat/l2fwd-cat.c
@@ -19,10 +19,6 @@
 #define MBUF_CACHE_SIZE 250
 #define BURST_SIZE 32
 
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = { .max_rx_pkt_len = RTE_ETHER_MAX_LEN }
-};
-
 /* l2fwd-cat.c: CAT enabled, basic DPDK skeleton forwarding example. */
 
 /*
@@ -32,7 +28,7 @@ static const struct rte_eth_conf port_conf_default = {
 static inline int
 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	const uint16_t rx_rings = 1, tx_rings = 1;
 	int retval;
 	uint16_t q;
@@ -42,6 +38,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	/* Configure the Ethernet device. */
 	retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
 	if (retval != 0)
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index c2ffbdd50636..c646f1748ca7 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -217,7 +217,6 @@ struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/examples/l2fwd-event/l2fwd_common.c b/examples/l2fwd-event/l2fwd_common.c
index 19f32809aa9d..9040be5ed9b6 100644
--- a/examples/l2fwd-event/l2fwd_common.c
+++ b/examples/l2fwd-event/l2fwd_common.c
@@ -11,7 +11,6 @@ l2fwd_event_init_ports(struct l2fwd_resources *rsrc)
 	uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 	struct rte_eth_conf port_conf = {
 		.rxmode = {
-			.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 			.split_hdr_size = 0,
 		},
 		.txmode = {
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index 60545f305934..67e6356acff6 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -125,7 +125,6 @@ static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode	= ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
@@ -141,6 +140,8 @@ static struct rte_eth_conf port_conf = {
 	},
 };
 
+static uint32_t max_pkt_len;
+
 static struct rte_mempool *pktmbuf_pool[NB_SOCKETS];
 
 /* ethernet addresses of ports */
@@ -201,8 +202,8 @@ enum {
 	OPT_CONFIG_NUM = 256,
 #define OPT_NONUMA      "no-numa"
 	OPT_NONUMA_NUM,
-#define OPT_ENBJMO      "enable-jumbo"
-	OPT_ENBJMO_NUM,
+#define OPT_MAX_PKT_LEN "max-pkt-len"
+	OPT_MAX_PKT_LEN_NUM,
 #define OPT_RULE_IPV4   "rule_ipv4"
 	OPT_RULE_IPV4_NUM,
 #define OPT_RULE_IPV6	"rule_ipv6"
@@ -1620,26 +1621,21 @@ print_usage(const char *prgname)
 
 	usage_acl_alg(alg, sizeof(alg));
 	printf("%s [EAL options] -- -p PORTMASK -P"
-		"--"OPT_RULE_IPV4"=FILE"
-		"--"OPT_RULE_IPV6"=FILE"
+		"  --"OPT_RULE_IPV4"=FILE"
+		"  --"OPT_RULE_IPV6"=FILE"
 		"  [--"OPT_CONFIG" (port,queue,lcore)[,(port,queue,lcore]]"
-		"  [--"OPT_ENBJMO" [--max-pkt-len PKTLEN]]\n"
+		"  [--"OPT_MAX_PKT_LEN" PKTLEN]\n"
 		"  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
-		"  -P : enable promiscuous mode\n"
-		"  --"OPT_CONFIG": (port,queue,lcore): "
-		"rx queues configuration\n"
+		"  -P: enable promiscuous mode\n"
+		"  --"OPT_CONFIG" (port,queue,lcore): rx queues configuration\n"
 		"  --"OPT_NONUMA": optional, disable numa awareness\n"
-		"  --"OPT_ENBJMO": enable jumbo frame"
-		" which max packet len is PKTLEN in decimal (64-9600)\n"
-		"  --"OPT_RULE_IPV4"=FILE: specify the ipv4 rules entries "
-		"file. "
+		"  --"OPT_MAX_PKT_LEN" PKTLEN: maximum packet length in decimal (64-9600)\n"
+		"  --"OPT_RULE_IPV4"=FILE: specify the ipv4 rules entries file. "
 		"Each rule occupy one line. "
 		"2 kinds of rules are supported. "
 		"One is ACL entry at while line leads with character '%c', "
-		"another is route entry at while line leads with "
-		"character '%c'.\n"
-		"  --"OPT_RULE_IPV6"=FILE: specify the ipv6 rules "
-		"entries file.\n"
+		"another is route entry at while line leads with character '%c'.\n"
+		"  --"OPT_RULE_IPV6"=FILE: specify the ipv6 rules entries file.\n"
 		"  --"OPT_ALG": ACL classify method to use, one of: %s\n",
 		prgname, ACL_LEAD_CHAR, ROUTE_LEAD_CHAR, alg);
 }
@@ -1760,14 +1756,14 @@ parse_args(int argc, char **argv)
 	int option_index;
 	char *prgname = argv[0];
 	static struct option lgopts[] = {
-		{OPT_CONFIG,    1, NULL, OPT_CONFIG_NUM    },
-		{OPT_NONUMA,    0, NULL, OPT_NONUMA_NUM    },
-		{OPT_ENBJMO,    0, NULL, OPT_ENBJMO_NUM    },
-		{OPT_RULE_IPV4, 1, NULL, OPT_RULE_IPV4_NUM },
-		{OPT_RULE_IPV6, 1, NULL, OPT_RULE_IPV6_NUM },
-		{OPT_ALG,       1, NULL, OPT_ALG_NUM       },
-		{OPT_ETH_DEST,  1, NULL, OPT_ETH_DEST_NUM  },
-		{NULL,          0, 0,    0                 }
+		{OPT_CONFIG,      1, NULL, OPT_CONFIG_NUM      },
+		{OPT_NONUMA,      0, NULL, OPT_NONUMA_NUM      },
+		{OPT_MAX_PKT_LEN, 1, NULL, OPT_MAX_PKT_LEN_NUM },
+		{OPT_RULE_IPV4,   1, NULL, OPT_RULE_IPV4_NUM   },
+		{OPT_RULE_IPV6,   1, NULL, OPT_RULE_IPV6_NUM   },
+		{OPT_ALG,         1, NULL, OPT_ALG_NUM         },
+		{OPT_ETH_DEST,    1, NULL, OPT_ETH_DEST_NUM    },
+		{NULL,            0, 0,    0                   }
 	};
 
 	argvopt = argv;
@@ -1806,43 +1802,11 @@ parse_args(int argc, char **argv)
 			numa_on = 0;
 			break;
 
-		case OPT_ENBJMO_NUM:
-		{
-			struct option lenopts = {
-				"max-pkt-len",
-				required_argument,
-				0,
-				0
-			};
-
-			printf("jumbo frame is enabled\n");
-			port_conf.rxmode.offloads |=
-					DEV_RX_OFFLOAD_JUMBO_FRAME;
-			port_conf.txmode.offloads |=
-					DEV_TX_OFFLOAD_MULTI_SEGS;
-
-			/*
-			 * if no max-pkt-len set, then use the
-			 * default value RTE_ETHER_MAX_LEN
-			 */
-			if (getopt_long(argc, argvopt, "",
-					&lenopts, &option_index) == 0) {
-				ret = parse_max_pkt_len(optarg);
-				if ((ret < 64) ||
-					(ret > MAX_JUMBO_PKT_LEN)) {
-					printf("invalid packet "
-						"length\n");
-					print_usage(prgname);
-					return -1;
-				}
-				port_conf.rxmode.max_rx_pkt_len = ret;
-			}
-			printf("set jumbo frame max packet length "
-				"to %u\n",
-				(unsigned int)
-				port_conf.rxmode.max_rx_pkt_len);
+		case OPT_MAX_PKT_LEN_NUM:
+			printf("Custom frame size is configured\n");
+			max_pkt_len = parse_max_pkt_len(optarg);
 			break;
-		}
+
 		case OPT_RULE_IPV4_NUM:
 			parm_config.rule_ipv4_name = optarg;
 			break;
@@ -2010,6 +1974,43 @@ set_default_dest_mac(void)
 	}
 }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+		struct rte_eth_dev_info *dev_info)
+{
+	uint32_t overhead_len;
+
+	if (max_pkt_len == 0)
+		return 0;
+
+	if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+		return -1;
+
+	overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+			dev_info->max_mtu);
+	conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+	if (conf->rxmode.mtu > RTE_ETHER_MTU) {
+		conf->txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+		conf->rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	}
+
+	return 0;
+}
+
 int
 main(int argc, char **argv)
 {
@@ -2083,6 +2084,12 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
+		ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+				"Invalid max packet length: %u (port %u)\n",
+				max_pkt_len, portid);
+
 		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 			local_port_conf.txmode.offloads |=
 				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
diff --git a/examples/l3fwd-graph/main.c b/examples/l3fwd-graph/main.c
index a0de8ca9b42d..46568eba9c01 100644
--- a/examples/l3fwd-graph/main.c
+++ b/examples/l3fwd-graph/main.c
@@ -112,7 +112,6 @@ static uint16_t nb_lcore_params = RTE_DIM(lcore_params_array_default);
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.rx_adv_conf = {
@@ -126,6 +125,8 @@ static struct rte_eth_conf port_conf = {
 	},
 };
 
+static uint32_t max_pkt_len;
+
 static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
 
 static struct rte_node_ethdev_config ethdev_conf[RTE_MAX_ETHPORTS];
@@ -259,7 +260,7 @@ print_usage(const char *prgname)
 		" [-P]"
 		" --config (port,queue,lcore)[,(port,queue,lcore)]"
 		" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
-		" [--enable-jumbo [--max-pkt-len PKTLEN]]"
+		" [--max-pkt-len PKTLEN]"
 		" [--no-numa]"
 		" [--per-port-pool]\n\n"
 
@@ -268,9 +269,7 @@ print_usage(const char *prgname)
 		"  --config (port,queue,lcore): Rx queue configuration\n"
 		"  --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for "
 		"port X\n"
-		"  --enable-jumbo: Enable jumbo frames\n"
-		"  --max-pkt-len: Under the premise of enabling jumbo,\n"
-		"                 maximum packet length in decimal (64-9600)\n"
+		"  --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
 		"  --no-numa: Disable numa awareness\n"
 		"  --per-port-pool: Use separate buffer pool per port\n\n",
 		prgname);
@@ -404,7 +403,7 @@ static const char short_options[] = "p:" /* portmask */
 #define CMD_LINE_OPT_CONFIG	   "config"
 #define CMD_LINE_OPT_ETH_DEST	   "eth-dest"
 #define CMD_LINE_OPT_NO_NUMA	   "no-numa"
-#define CMD_LINE_OPT_ENABLE_JUMBO  "enable-jumbo"
+#define CMD_LINE_OPT_MAX_PKT_LEN   "max-pkt-len"
 #define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
 enum {
 	/* Long options mapped to a short option */
@@ -416,7 +415,7 @@ enum {
 	CMD_LINE_OPT_CONFIG_NUM,
 	CMD_LINE_OPT_ETH_DEST_NUM,
 	CMD_LINE_OPT_NO_NUMA_NUM,
-	CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+	CMD_LINE_OPT_MAX_PKT_LEN_NUM,
 	CMD_LINE_OPT_PARSE_PER_PORT_POOL,
 };
 
@@ -424,7 +423,7 @@ static const struct option lgopts[] = {
 	{CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
 	{CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
 	{CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
-	{CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+	{CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, CMD_LINE_OPT_MAX_PKT_LEN_NUM},
 	{CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
 	{NULL, 0, 0, 0},
 };
@@ -490,28 +489,8 @@ parse_args(int argc, char **argv)
 			numa_on = 0;
 			break;
 
-		case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
-			const struct option lenopts = {"max-pkt-len",
-						       required_argument, 0, 0};
-
-			port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
-			port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
-
-			/*
-			 * if no max-pkt-len set, use the default
-			 * value RTE_ETHER_MAX_LEN.
-			 */
-			if (getopt_long(argc, argvopt, "", &lenopts,
-					&option_index) == 0) {
-				ret = parse_max_pkt_len(optarg);
-				if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
-					fprintf(stderr, "Invalid maximum "
-							"packet length\n");
-					print_usage(prgname);
-					return -1;
-				}
-				port_conf.rxmode.max_rx_pkt_len = ret;
-			}
+		case CMD_LINE_OPT_MAX_PKT_LEN_NUM: {
+			max_pkt_len = parse_max_pkt_len(optarg);
 			break;
 		}
 
@@ -722,6 +701,43 @@ graph_main_loop(void *conf)
 }
 /* >8 End of main processing loop. */
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+		struct rte_eth_dev_info *dev_info)
+{
+	uint32_t overhead_len;
+
+	if (max_pkt_len == 0)
+		return 0;
+
+	if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+		return -1;
+
+	overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+			dev_info->max_mtu);
+	conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+	if (conf->rxmode.mtu > RTE_ETHER_MTU) {
+		conf->txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+		conf->rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	}
+
+	return 0;
+}
+
 int
 main(int argc, char **argv)
 {
@@ -807,6 +823,13 @@ main(int argc, char **argv)
 		       nb_rx_queue, n_tx_queue);
 
 		rte_eth_dev_info_get(portid, &dev_info);
+
+		ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+				"Invalid max packet length: %u (port %u)\n",
+				max_pkt_len, portid);
+
 		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 			local_port_conf.txmode.offloads |=
 				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 73a3ab5bc0eb..03c0b8bb15b8 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -251,7 +251,6 @@ uint16_t nb_lcore_params = RTE_DIM(lcore_params_array_default);
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode        = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
@@ -266,6 +265,8 @@ static struct rte_eth_conf port_conf = {
 	}
 };
 
+static uint32_t max_pkt_len;
+
 static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
 
 
@@ -1601,16 +1602,15 @@ print_usage(const char *prgname)
 		"  [--config (port,queue,lcore)[,(port,queue,lcore]]"
 		"  [--high-perf-cores CORELIST"
 		"  [--perf-config (port,queue,hi_perf,lcore_index)[,(port,queue,hi_perf,lcore_index]]"
-		"  [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
+		"  [--max-pkt-len PKTLEN]\n"
 		"  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
-		"  -P : enable promiscuous mode\n"
+		"  -P: enable promiscuous mode\n"
 		"  --config (port,queue,lcore): rx queues configuration\n"
 		"  --high-perf-cores CORELIST: list of high performance cores\n"
 		"  --perf-config: similar as config, cores specified as indices"
 		" for bins containing high or regular performance cores\n"
 		"  --no-numa: optional, disable numa awareness\n"
-		"  --enable-jumbo: enable jumbo frame"
-		" which max packet len is PKTLEN in decimal (64-9600)\n"
+		"  --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
 		"  --parse-ptype: parse packet type by software\n"
 		"  --legacy: use legacy interrupt-based scaling\n"
 		"  --empty-poll: enable empty poll detection"
@@ -1795,6 +1795,7 @@ parse_ep_config(const char *q_arg)
 #define CMD_LINE_OPT_INTERRUPT_ONLY "interrupt-only"
 #define CMD_LINE_OPT_TELEMETRY "telemetry"
 #define CMD_LINE_OPT_PMD_MGMT "pmd-mgmt"
+#define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
 
 /* Parse the argument given in the command line of the application */
 static int
@@ -1810,7 +1811,7 @@ parse_args(int argc, char **argv)
 		{"perf-config", 1, 0, 0},
 		{"high-perf-cores", 1, 0, 0},
 		{"no-numa", 0, 0, 0},
-		{"enable-jumbo", 0, 0, 0},
+		{CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, 0},
 		{CMD_LINE_OPT_EMPTY_POLL, 1, 0, 0},
 		{CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
 		{CMD_LINE_OPT_LEGACY, 0, 0, 0},
@@ -1954,36 +1955,10 @@ parse_args(int argc, char **argv)
 			}
 
 			if (!strncmp(lgopts[option_index].name,
-					"enable-jumbo", 12)) {
-				struct option lenopts =
-					{"max-pkt-len", required_argument, \
-									0, 0};
-
-				printf("jumbo frame is enabled \n");
-				port_conf.rxmode.offloads |=
-						DEV_RX_OFFLOAD_JUMBO_FRAME;
-				port_conf.txmode.offloads |=
-						DEV_TX_OFFLOAD_MULTI_SEGS;
-
-				/**
-				 * if no max-pkt-len set, use the default value
-				 * RTE_ETHER_MAX_LEN
-				 */
-				if (0 == getopt_long(argc, argvopt, "",
-						&lenopts, &option_index)) {
-					ret = parse_max_pkt_len(optarg);
-					if ((ret < 64) ||
-						(ret > MAX_JUMBO_PKT_LEN)){
-						printf("invalid packet "
-								"length\n");
-						print_usage(prgname);
-						return -1;
-					}
-					port_conf.rxmode.max_rx_pkt_len = ret;
-				}
-				printf("set jumbo frame "
-					"max packet length to %u\n",
-				(unsigned int)port_conf.rxmode.max_rx_pkt_len);
+					CMD_LINE_OPT_MAX_PKT_LEN,
+					sizeof(CMD_LINE_OPT_MAX_PKT_LEN))) {
+				printf("Custom frame size is configured\n");
+				max_pkt_len = parse_max_pkt_len(optarg);
 			}
 
 			if (!strncmp(lgopts[option_index].name,
@@ -2505,6 +2480,43 @@ mode_to_str(enum appmode mode)
 	}
 }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+		struct rte_eth_dev_info *dev_info)
+{
+	uint32_t overhead_len;
+
+	if (max_pkt_len == 0)
+		return 0;
+
+	if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+		return -1;
+
+	overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+			dev_info->max_mtu);
+	conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+	if (conf->rxmode.mtu > RTE_ETHER_MTU) {
+		conf->txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+		conf->rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	}
+
+	return 0;
+}
+
 /* Power library initialized in the main routine. 8< */
 int
 main(int argc, char **argv)
@@ -2622,6 +2634,12 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
+		ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+				"Invalid max packet length: %u (port %u)\n",
+				max_pkt_len, portid);
+
 		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 			local_port_conf.txmode.offloads |=
 				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 00ac267af1dd..66d76e87cb25 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -121,7 +121,6 @@ static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
@@ -136,6 +135,8 @@ static struct rte_eth_conf port_conf = {
 	},
 };
 
+static uint32_t max_pkt_len;
+
 static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS];
 static uint8_t lkp_per_socket[NB_SOCKETS];
 
@@ -326,7 +327,7 @@ print_usage(const char *prgname)
 		" [--lookup]"
 		" --config (port,queue,lcore)[,(port,queue,lcore)]"
 		" [--eth-dest=X,MM:MM:MM:MM:MM:MM]"
-		" [--enable-jumbo [--max-pkt-len PKTLEN]]"
+		" [--max-pkt-len PKTLEN]"
 		" [--no-numa]"
 		" [--hash-entry-num]"
 		" [--ipv6]"
@@ -344,9 +345,7 @@ print_usage(const char *prgname)
 		"            Accepted: em (Exact Match), lpm (Longest Prefix Match), fib (Forwarding Information Base)\n"
 		"  --config (port,queue,lcore): Rx queue configuration\n"
 		"  --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n"
-		"  --enable-jumbo: Enable jumbo frames\n"
-		"  --max-pkt-len: Under the premise of enabling jumbo,\n"
-		"                 maximum packet length in decimal (64-9600)\n"
+		"  --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
 		"  --no-numa: Disable numa awareness\n"
 		"  --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
 		"  --ipv6: Set if running ipv6 packets\n"
@@ -566,7 +565,7 @@ static const char short_options[] =
 #define CMD_LINE_OPT_ETH_DEST "eth-dest"
 #define CMD_LINE_OPT_NO_NUMA "no-numa"
 #define CMD_LINE_OPT_IPV6 "ipv6"
-#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
+#define CMD_LINE_OPT_MAX_PKT_LEN "max-pkt-len"
 #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
 #define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
@@ -584,7 +583,7 @@ enum {
 	CMD_LINE_OPT_ETH_DEST_NUM,
 	CMD_LINE_OPT_NO_NUMA_NUM,
 	CMD_LINE_OPT_IPV6_NUM,
-	CMD_LINE_OPT_ENABLE_JUMBO_NUM,
+	CMD_LINE_OPT_MAX_PKT_LEN_NUM,
 	CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
 	CMD_LINE_OPT_PARSE_PTYPE_NUM,
 	CMD_LINE_OPT_PARSE_PER_PORT_POOL,
@@ -599,7 +598,7 @@ static const struct option lgopts[] = {
 	{CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM},
 	{CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM},
 	{CMD_LINE_OPT_IPV6, 0, 0, CMD_LINE_OPT_IPV6_NUM},
-	{CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM},
+	{CMD_LINE_OPT_MAX_PKT_LEN, 1, 0, CMD_LINE_OPT_MAX_PKT_LEN_NUM},
 	{CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
 	{CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
 	{CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
@@ -698,31 +697,9 @@ parse_args(int argc, char **argv)
 			ipv6 = 1;
 			break;
 
-		case CMD_LINE_OPT_ENABLE_JUMBO_NUM: {
-			const struct option lenopts = {
-				"max-pkt-len", required_argument, 0, 0
-			};
-
-			port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
-			port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
-
-			/*
-			 * if no max-pkt-len set, use the default
-			 * value RTE_ETHER_MAX_LEN.
-			 */
-			if (getopt_long(argc, argvopt, "",
-					&lenopts, &option_index) == 0) {
-				ret = parse_max_pkt_len(optarg);
-				if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) {
-					fprintf(stderr,
-						"invalid maximum packet length\n");
-					print_usage(prgname);
-					return -1;
-				}
-				port_conf.rxmode.max_rx_pkt_len = ret;
-			}
+		case CMD_LINE_OPT_MAX_PKT_LEN_NUM:
+			max_pkt_len = parse_max_pkt_len(optarg);
 			break;
-		}
 
 		case CMD_LINE_OPT_HASH_ENTRY_NUM_NUM:
 			ret = parse_hash_entry_number(optarg);
@@ -981,6 +958,43 @@ prepare_ptype_parser(uint16_t portid, uint16_t queueid)
 	return 0;
 }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+		struct rte_eth_dev_info *dev_info)
+{
+	uint32_t overhead_len;
+
+	if (max_pkt_len == 0)
+		return 0;
+
+	if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+		return -1;
+
+	overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+			dev_info->max_mtu);
+	conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+	if (conf->rxmode.mtu > RTE_ETHER_MTU) {
+		conf->txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+		conf->rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	}
+
+	return 0;
+}
+
 static void
 l3fwd_poll_resource_setup(void)
 {
@@ -1035,6 +1049,12 @@ l3fwd_poll_resource_setup(void)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
+		ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+				"Invalid max packet length: %u (port %u)\n",
+				max_pkt_len, portid);
+
 		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 			local_port_conf.txmode.offloads |=
 				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
diff --git a/examples/performance-thread/l3fwd-thread/main.c b/examples/performance-thread/l3fwd-thread/main.c
index 2905199743a7..2db1b5fc154f 100644
--- a/examples/performance-thread/l3fwd-thread/main.c
+++ b/examples/performance-thread/l3fwd-thread/main.c
@@ -308,7 +308,6 @@ static uint16_t nb_tx_thread_params = RTE_DIM(tx_thread_params_array_default);
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
@@ -323,6 +322,8 @@ static struct rte_eth_conf port_conf = {
 	},
 };
 
+static uint32_t max_pkt_len;
+
 static struct rte_mempool *pktmbuf_pool[NB_SOCKETS];
 
 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
@@ -2643,7 +2644,7 @@ print_usage(const char *prgname)
 	printf("%s [EAL options] -- -p PORTMASK -P"
 		"  [--rx (port,queue,lcore,thread)[,(port,queue,lcore,thread]]"
 		"  [--tx (lcore,thread)[,(lcore,thread]]"
-		"  [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
+		"  [--max-pkt-len PKTLEN]"
 		"  [--parse-ptype]\n\n"
 		"  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
 		"  -P : enable promiscuous mode\n"
@@ -2653,8 +2654,7 @@ print_usage(const char *prgname)
 		"  --eth-dest=X,MM:MM:MM:MM:MM:MM: optional, ethernet destination for port X\n"
 		"  --no-numa: optional, disable numa awareness\n"
 		"  --ipv6: optional, specify it if running ipv6 packets\n"
-		"  --enable-jumbo: enable jumbo frame"
-		" which max packet len is PKTLEN in decimal (64-9600)\n"
+		"  --max-pkt-len PKTLEN: maximum packet length in decimal (64-9600)\n"
 		"  --hash-entry-num: specify the hash entry number in hexadecimal to be setup\n"
 		"  --no-lthreads: turn off lthread model\n"
 		"  --parse-ptype: set to use software to analyze packet type\n\n",
@@ -2877,8 +2877,8 @@ enum {
 	OPT_NO_NUMA_NUM,
 #define OPT_IPV6            "ipv6"
 	OPT_IPV6_NUM,
-#define OPT_ENABLE_JUMBO    "enable-jumbo"
-	OPT_ENABLE_JUMBO_NUM,
+#define OPT_MAX_PKT_LEN "max-pkt-len"
+	OPT_MAX_PKT_LEN_NUM,
 #define OPT_HASH_ENTRY_NUM  "hash-entry-num"
 	OPT_HASH_ENTRY_NUM_NUM,
 #define OPT_NO_LTHREADS     "no-lthreads"
@@ -2902,7 +2902,7 @@ parse_args(int argc, char **argv)
 		{OPT_ETH_DEST,       1, NULL, OPT_ETH_DEST_NUM       },
 		{OPT_NO_NUMA,        0, NULL, OPT_NO_NUMA_NUM        },
 		{OPT_IPV6,           0, NULL, OPT_IPV6_NUM           },
-		{OPT_ENABLE_JUMBO,   0, NULL, OPT_ENABLE_JUMBO_NUM   },
+		{OPT_MAX_PKT_LEN,    1, NULL, OPT_MAX_PKT_LEN_NUM    },
 		{OPT_HASH_ENTRY_NUM, 1, NULL, OPT_HASH_ENTRY_NUM_NUM },
 		{OPT_NO_LTHREADS,    0, NULL, OPT_NO_LTHREADS_NUM    },
 		{OPT_PARSE_PTYPE,    0, NULL, OPT_PARSE_PTYPE_NUM    },
@@ -2981,35 +2981,10 @@ parse_args(int argc, char **argv)
 			parse_ptype_on = 1;
 			break;
 
-		case OPT_ENABLE_JUMBO_NUM:
-		{
-			struct option lenopts = {"max-pkt-len",
-					required_argument, 0, 0};
-
-			printf("jumbo frame is enabled - disabling simple TX path\n");
-			port_conf.rxmode.offloads |=
-					DEV_RX_OFFLOAD_JUMBO_FRAME;
-			port_conf.txmode.offloads |=
-					DEV_TX_OFFLOAD_MULTI_SEGS;
-
-			/* if no max-pkt-len set, use the default value
-			 * RTE_ETHER_MAX_LEN
-			 */
-			if (getopt_long(argc, argvopt, "", &lenopts,
-					&option_index) == 0) {
-
-				ret = parse_max_pkt_len(optarg);
-				if ((ret < 64) || (ret > MAX_JUMBO_PKT_LEN)) {
-					printf("invalid packet length\n");
-					print_usage(prgname);
-					return -1;
-				}
-				port_conf.rxmode.max_rx_pkt_len = ret;
-			}
-			printf("set jumbo frame max packet length to %u\n",
-				(unsigned int)port_conf.rxmode.max_rx_pkt_len);
+		case OPT_MAX_PKT_LEN_NUM:
+			max_pkt_len = parse_max_pkt_len(optarg);
 			break;
-		}
+
 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
 		case OPT_HASH_ENTRY_NUM_NUM:
 			ret = parse_hash_entry_number(optarg);
@@ -3489,6 +3464,43 @@ check_all_ports_link_status(uint32_t port_mask)
 	}
 }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
+static int
+config_port_max_pkt_len(struct rte_eth_conf *conf,
+		struct rte_eth_dev_info *dev_info)
+{
+	uint32_t overhead_len;
+
+	if (max_pkt_len == 0)
+		return 0;
+
+	if (max_pkt_len < RTE_ETHER_MIN_LEN || max_pkt_len > MAX_JUMBO_PKT_LEN)
+		return -1;
+
+	overhead_len = eth_dev_get_overhead_len(dev_info->max_rx_pktlen,
+			dev_info->max_mtu);
+	conf->rxmode.mtu = max_pkt_len - overhead_len;
+
+	if (conf->rxmode.mtu > RTE_ETHER_MTU) {
+		conf->txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS;
+		conf->rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+	}
+
+	return 0;
+}
+
 int
 main(int argc, char **argv)
 {
@@ -3577,6 +3589,12 @@ main(int argc, char **argv)
 				"Error during getting device (port %u) info: %s\n",
 				portid, strerror(-ret));
 
+		ret = config_port_max_pkt_len(&local_port_conf, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+				"Invalid max packet length: %u (port %u)\n",
+				max_pkt_len, portid);
+
 		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
 			local_port_conf.txmode.offloads |=
 				DEV_TX_OFFLOAD_MBUF_FAST_FREE;
diff --git a/examples/performance-thread/l3fwd-thread/test.sh b/examples/performance-thread/l3fwd-thread/test.sh
index f0b6e271a5f3..3dd33407ea41 100755
--- a/examples/performance-thread/l3fwd-thread/test.sh
+++ b/examples/performance-thread/l3fwd-thread/test.sh
@@ -11,7 +11,7 @@ case "$1" in
 		echo "1.1 1 L-core per pcore (N=2)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3 \
-				--enable-jumbo --max-pkt-len 1500  \
+				--max-pkt-len 1500  \
 				--rx="(0,0,0,0)(1,0,0,0)"          \
 				--tx="(1,0)"                       \
 				--stat-lcore 2                     \
@@ -23,7 +23,7 @@ case "$1" in
 		echo "1.2 1 L-core per pcore (N=4)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3 \
-				--enable-jumbo --max-pkt-len 1500  \
+				--max-pkt-len 1500  \
 				--rx="(0,0,0,0)(1,0,1,1)"          \
 				--tx="(2,0)(3,1)"                  \
 				--stat-lcore 4                     \
@@ -34,7 +34,7 @@ case "$1" in
 		echo "1.3 1 L-core per pcore (N=8)"
 
 		./build/l3fwd-thread -c 1ff -n 2 -- -P -p 3                          \
-				--enable-jumbo --max-pkt-len 1500                            \
+				--max-pkt-len 1500                            \
 				--rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)"                  \
 				--tx="(4,0)(5,1)(6,2)(7,3)"                                  \
 				--stat-lcore 8                                               \
@@ -45,7 +45,7 @@ case "$1" in
 		echo "1.3 1 L-core per pcore (N=16)"
 
 		./build/l3fwd-thread -c 3ffff -n 2 -- -P -p 3                          \
-				--enable-jumbo --max-pkt-len 1500                              \
+				--max-pkt-len 1500                              \
 				--rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \
 				--tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)"          \
 				--stat-lcore 16                                                \
@@ -61,7 +61,7 @@ case "$1" in
 		echo "2.1 N L-core per pcore (N=2)"
 
 		./build/l3fwd-thread -c ff -n 2 --lcores="2,(0-1)@0" -- -P -p 3 \
-				--enable-jumbo --max-pkt-len 1500                       \
+				--max-pkt-len 1500                       \
 				--rx="(0,0,0,0)(1,0,0,0)"                               \
 				--tx="(1,0)"                                            \
 				--stat-lcore 2                                          \
@@ -73,7 +73,7 @@ case "$1" in
 		echo "2.2 N L-core per pcore (N=4)"
 
 		./build/l3fwd-thread -c ff -n 2 --lcores="(0-3)@0,4" -- -P -p 3 \
-				--enable-jumbo --max-pkt-len 1500  \
+				--max-pkt-len 1500  \
 				--rx="(0,0,0,0)(1,0,1,1)"          \
 				--tx="(2,0)(3,1)"                  \
 				--stat-lcore 4                     \
@@ -84,7 +84,7 @@ case "$1" in
 		echo "2.3 N L-core per pcore (N=8)"
 
 		./build/l3fwd-thread -c 3ffff -n 2 --lcores="(0-7)@0,8" -- -P -p 3     \
-				--enable-jumbo --max-pkt-len 1500                              \
+				--max-pkt-len 1500                              \
 				--rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)"                    \
 				--tx="(4,0)(5,1)(6,2)(7,3)"                                    \
 				--stat-lcore 8                                                 \
@@ -95,7 +95,7 @@ case "$1" in
 		echo "2.3 N L-core per pcore (N=16)"
 
 		./build/l3fwd-thread -c 3ffff -n 2 --lcores="(0-15)@0,16" -- -P -p 3   \
-				--enable-jumbo --max-pkt-len 1500                              \
+				--max-pkt-len 1500                              \
 				--rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \
 				--tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)"          \
 				--stat-lcore 16                                                \
@@ -111,7 +111,7 @@ case "$1" in
 		echo "3.1 N L-threads per pcore (N=2)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3  \
-				--enable-jumbo --max-pkt-len 1500   \
+				--max-pkt-len 1500   \
 				--rx="(0,0,0,0)(1,0,0,0)"           \
 				--tx="(0,0)"                        \
 				--stat-lcore 1
@@ -121,7 +121,7 @@ case "$1" in
 		echo "3.2 N L-threads per pcore (N=4)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3  \
-				--enable-jumbo --max-pkt-len 1500   \
+				--max-pkt-len 1500   \
 				--rx="(0,0,0,0)(1,0,0,1)"           \
 				--tx="(0,0)(0,1)"                   \
 				--stat-lcore 1
@@ -131,7 +131,7 @@ case "$1" in
 		echo "3.2 N L-threads per pcore (N=8)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3                             \
-				--enable-jumbo --max-pkt-len 1500                              \
+				--max-pkt-len 1500                              \
 				--rx="(0,0,0,0)(0,1,0,1)(1,0,0,2)(1,1,0,3)"                    \
 				--tx="(0,0)(0,1)(0,2)(0,3)"                                    \
 				--stat-lcore 1
@@ -141,7 +141,7 @@ case "$1" in
 		echo "3.2 N L-threads per pcore (N=16)"
 
 		./build/l3fwd-thread -c ff -n 2 -- -P -p 3                             \
-				--enable-jumbo --max-pkt-len 1500                              \
+				--max-pkt-len 1500                              \
 				--rx="(0,0,0,0)(0,1,0,1)(0,2,0,2)(0,0,0,3)(1,0,0,4)(1,1,0,5)(1,2,0,6)(1,3,0,7)" \
 				--tx="(0,0)(0,1)(0,2)(0,3)(0,4)(0,5)(0,6)(0,7)"                \
 				--stat-lcore 1
diff --git a/examples/pipeline/obj.c b/examples/pipeline/obj.c
index 467cda5a6dac..4f20dfc4be06 100644
--- a/examples/pipeline/obj.c
+++ b/examples/pipeline/obj.c
@@ -134,7 +134,7 @@ static struct rte_eth_conf port_conf_default = {
 	.link_speeds = 0,
 	.rxmode = {
 		.mq_mode = ETH_MQ_RX_NONE,
-		.max_rx_pkt_len = 9000, /* Jumbo frame max packet len */
+		.mtu = 9000 - (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN), /* Jumbo frame MTU */
 		.split_hdr_size = 0, /* Header split buffer size */
 	},
 	.rx_adv_conf = {
diff --git a/examples/ptpclient/ptpclient.c b/examples/ptpclient/ptpclient.c
index 61e4ee0ea140..0f86cee0569c 100644
--- a/examples/ptpclient/ptpclient.c
+++ b/examples/ptpclient/ptpclient.c
@@ -47,12 +47,6 @@ uint32_t ptp_enabled_port_mask;
 uint8_t ptp_enabled_port_nb;
 static uint8_t ptp_enabled_ports[RTE_MAX_ETHPORTS];
 
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-	},
-};
-
 static const struct rte_ether_addr ether_multicast = {
 	.addr_bytes = {0x01, 0x1b, 0x19, 0x0, 0x0, 0x0}
 };
@@ -178,7 +172,7 @@ static inline int
 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
 	struct rte_eth_dev_info dev_info;
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	const uint16_t rx_rings = 1;
 	const uint16_t tx_rings = 1;
 	int retval;
@@ -189,6 +183,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	retval = rte_eth_dev_info_get(port, &dev_info);
 	if (retval != 0) {
 		printf("Error during getting device (port %u) info: %s\n",
diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
index 7ffccc8369dc..c32d2e12e633 100644
--- a/examples/qos_meter/main.c
+++ b/examples/qos_meter/main.c
@@ -52,7 +52,6 @@ static struct rte_mempool *pool = NULL;
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
 		.mq_mode	= ETH_MQ_RX_RSS,
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 		.offloads = DEV_RX_OFFLOAD_CHECKSUM,
 	},
diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
index 1abe003fc6ae..1367569c65db 100644
--- a/examples/qos_sched/init.c
+++ b/examples/qos_sched/init.c
@@ -57,7 +57,6 @@ struct flow_conf qos_conf[MAX_DATA_STREAMS];
 
 static struct rte_eth_conf port_conf = {
 	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
 		.split_hdr_size = 0,
 	},
 	.txmode = {
diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
index ab6fa7d56c5d..6845c396b8d9 100644
--- a/examples/rxtx_callbacks/main.c
+++ b/examples/rxtx_callbacks/main.c
@@ -40,12 +40,6 @@ tsc_field(struct rte_mbuf *mbuf)
 static const char usage[] =
 	"%s EAL_ARGS -- [-t]\n";
 
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-	},
-};
-
 static struct {
 	uint64_t total_cycles;
 	uint64_t total_queue_cycles;
@@ -124,7 +118,7 @@ calc_latency(uint16_t port, uint16_t qidx __rte_unused,
 static inline int
 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	const uint16_t rx_rings = 1, tx_rings = 1;
 	uint16_t nb_rxd = RX_RING_SIZE;
 	uint16_t nb_txd = TX_RING_SIZE;
@@ -137,6 +131,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	retval = rte_eth_dev_info_get(port, &dev_info);
 	if (retval != 0) {
 		printf("Error during getting device (port %u) info: %s\n",
diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
index ae9bbee8d820..fd7207aee758 100644
--- a/examples/skeleton/basicfwd.c
+++ b/examples/skeleton/basicfwd.c
@@ -17,14 +17,6 @@
 #define MBUF_CACHE_SIZE 250
 #define BURST_SIZE 32
 
-/* Configuration of ethernet ports. 8<  */
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-	},
-};
-/* >8 End of configuration of ethernet ports. */
-
 /* basicfwd.c: Basic DPDK skeleton forwarding example. */
 
 /*
@@ -36,7 +28,7 @@ static const struct rte_eth_conf port_conf_default = {
 static inline int
 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	const uint16_t rx_rings = 1, tx_rings = 1;
 	uint16_t nb_rxd = RX_RING_SIZE;
 	uint16_t nb_txd = TX_RING_SIZE;
@@ -48,6 +40,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	retval = rte_eth_dev_info_get(port, &dev_info);
 	if (retval != 0) {
 		printf("Error during getting device (port %u) info: %s\n",
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index b24fd82a6e71..427b882831bf 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -44,6 +44,7 @@
 #define BURST_RX_RETRIES 4		/* Number of retries on RX. */
 
 #define JUMBO_FRAME_MAX_SIZE    0x2600
+#define MAX_MTU (JUMBO_FRAME_MAX_SIZE - (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN))
 
 /* State of virtio device. */
 #define DEVICE_MAC_LEARNING 0
@@ -633,8 +634,7 @@ us_vhost_parse_args(int argc, char **argv)
 			if (ret) {
 				vmdq_conf_default.rxmode.offloads |=
 					DEV_RX_OFFLOAD_JUMBO_FRAME;
-				vmdq_conf_default.rxmode.max_rx_pkt_len
-					= JUMBO_FRAME_MAX_SIZE;
+				vmdq_conf_default.rxmode.mtu = MAX_MTU;
 			}
 			break;
 
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
index e59fb7d3478b..e19d79a40802 100644
--- a/examples/vm_power_manager/main.c
+++ b/examples/vm_power_manager/main.c
@@ -51,17 +51,10 @@
 static uint32_t enabled_port_mask;
 static volatile bool force_quit;
 
-/****************/
-static const struct rte_eth_conf port_conf_default = {
-	.rxmode = {
-		.max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-	},
-};
-
 static inline int
 port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 {
-	struct rte_eth_conf port_conf = port_conf_default;
+	struct rte_eth_conf port_conf;
 	const uint16_t rx_rings = 1, tx_rings = 1;
 	int retval;
 	uint16_t q;
@@ -71,6 +64,8 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
 	if (!rte_eth_dev_is_valid_port(port))
 		return -1;
 
+	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
+
 	retval = rte_eth_dev_info_get(port, &dev_info);
 	if (retval != 0) {
 		printf("Error during getting device (port %u) info: %s\n",
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 028907bc4b91..634e4d7d7fd6 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -1338,6 +1338,19 @@ eth_dev_validate_offloads(uint16_t port_id, uint64_t req_offloads,
 	return ret;
 }
 
+static uint32_t
+eth_dev_get_overhead_len(uint32_t max_rx_pktlen, uint16_t max_mtu)
+{
+	uint32_t overhead_len;
+
+	if (max_mtu != UINT16_MAX && max_rx_pktlen > max_mtu)
+		overhead_len = max_rx_pktlen - max_mtu;
+	else
+		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+	return overhead_len;
+}
+
 int
 rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 		      const struct rte_eth_conf *dev_conf)
@@ -1345,7 +1358,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 	struct rte_eth_dev *dev;
 	struct rte_eth_dev_info dev_info;
 	struct rte_eth_conf orig_conf;
-	uint16_t overhead_len;
+	uint32_t max_rx_pktlen;
+	uint32_t overhead_len;
 	int diag;
 	int ret;
 	uint16_t old_mtu;
@@ -1395,11 +1409,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 		goto rollback;
 
 	/* Get the real Ethernet overhead length */
-	if (dev_info.max_mtu != UINT16_MAX &&
-	    dev_info.max_rx_pktlen > dev_info.max_mtu)
-		overhead_len = dev_info.max_rx_pktlen - dev_info.max_mtu;
-	else
-		overhead_len = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+	overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
+			dev_info.max_mtu);
 
 	/* If number of queues specified by application for both Rx and Tx is
 	 * zero, use driver preferred values. This cannot be done individually
@@ -1468,49 +1479,45 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 	}
 
 	/*
-	 * If jumbo frames are enabled, check that the maximum RX packet
-	 * length is supported by the configured device.
+	 * Check that the maximum RX packet length is supported by the
+	 * configured device.
 	 */
-	if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
-		if (dev_conf->rxmode.max_rx_pkt_len > dev_info.max_rx_pktlen) {
-			RTE_ETHDEV_LOG(ERR,
-				"Ethdev port_id=%u max_rx_pkt_len %u > max valid value %u\n",
-				port_id, dev_conf->rxmode.max_rx_pkt_len,
-				dev_info.max_rx_pktlen);
-			ret = -EINVAL;
-			goto rollback;
-		} else if (dev_conf->rxmode.max_rx_pkt_len < RTE_ETHER_MIN_LEN) {
-			RTE_ETHDEV_LOG(ERR,
-				"Ethdev port_id=%u max_rx_pkt_len %u < min valid value %u\n",
-				port_id, dev_conf->rxmode.max_rx_pkt_len,
-				(unsigned int)RTE_ETHER_MIN_LEN);
-			ret = -EINVAL;
-			goto rollback;
-		}
+	if (dev_conf->rxmode.mtu == 0)
+		dev->data->dev_conf.rxmode.mtu = RTE_ETHER_MTU;
+	max_rx_pktlen = dev->data->dev_conf.rxmode.mtu + overhead_len;
+	if (max_rx_pktlen > dev_info.max_rx_pktlen) {
+		RTE_ETHDEV_LOG(ERR,
+			"Ethdev port_id=%u max_rx_pktlen %u > max valid value %u\n",
+			port_id, max_rx_pktlen, dev_info.max_rx_pktlen);
+		ret = -EINVAL;
+		goto rollback;
+	} else if (max_rx_pktlen < RTE_ETHER_MIN_LEN) {
+		RTE_ETHDEV_LOG(ERR,
+			"Ethdev port_id=%u max_rx_pktlen %u < min valid value %u\n",
+			port_id, max_rx_pktlen, RTE_ETHER_MIN_LEN);
+		ret = -EINVAL;
+		goto rollback;
+	}
 
-		/* Scale the MTU size to adapt max_rx_pkt_len */
-		dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
-				overhead_len;
-	} else {
-		uint16_t pktlen = dev_conf->rxmode.max_rx_pkt_len;
-		if (pktlen < RTE_ETHER_MIN_MTU + overhead_len ||
-		    pktlen > RTE_ETHER_MTU + overhead_len)
+	if ((dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
+		if (dev->data->dev_conf.rxmode.mtu < RTE_ETHER_MIN_MTU ||
+				dev->data->dev_conf.rxmode.mtu > RTE_ETHER_MTU)
 			/* Use default value */
-			dev->data->dev_conf.rxmode.max_rx_pkt_len =
-						RTE_ETHER_MTU + overhead_len;
+			dev->data->dev_conf.rxmode.mtu = RTE_ETHER_MTU;
 	}
 
+	dev->data->mtu = dev->data->dev_conf.rxmode.mtu;
+
 	/*
 	 * If LRO is enabled, check that the maximum aggregated packet
 	 * size is supported by the configured device.
 	 */
 	if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO) {
 		if (dev_conf->rxmode.max_lro_pkt_size == 0)
-			dev->data->dev_conf.rxmode.max_lro_pkt_size =
-				dev->data->dev_conf.rxmode.max_rx_pkt_len;
+			dev->data->dev_conf.rxmode.max_lro_pkt_size = max_rx_pktlen;
 		ret = eth_dev_check_lro_pkt_size(port_id,
 				dev->data->dev_conf.rxmode.max_lro_pkt_size,
-				dev->data->dev_conf.rxmode.max_rx_pkt_len,
+				max_rx_pktlen,
 				dev_info.max_lro_pkt_size);
 		if (ret != 0)
 			goto rollback;
@@ -2163,13 +2170,20 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 	 * If LRO is enabled, check that the maximum aggregated packet
 	 * size is supported by the configured device.
 	 */
+	/* Get the real Ethernet overhead length */
 	if (local_conf.offloads & DEV_RX_OFFLOAD_TCP_LRO) {
+		uint32_t overhead_len;
+		uint32_t max_rx_pktlen;
+		int ret;
+
+		overhead_len = eth_dev_get_overhead_len(dev_info.max_rx_pktlen,
+				dev_info.max_mtu);
+		max_rx_pktlen = dev->data->mtu + overhead_len;
 		if (dev->data->dev_conf.rxmode.max_lro_pkt_size == 0)
-			dev->data->dev_conf.rxmode.max_lro_pkt_size =
-				dev->data->dev_conf.rxmode.max_rx_pkt_len;
-		int ret = eth_dev_check_lro_pkt_size(port_id,
+			dev->data->dev_conf.rxmode.max_lro_pkt_size = max_rx_pktlen;
+		ret = eth_dev_check_lro_pkt_size(port_id,
 				dev->data->dev_conf.rxmode.max_lro_pkt_size,
-				dev->data->dev_conf.rxmode.max_rx_pkt_len,
+				max_rx_pktlen,
 				dev_info.max_lro_pkt_size);
 		if (ret != 0)
 			return ret;
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 6d80514ba7a5..e73c7c522196 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -416,7 +416,7 @@ enum rte_eth_tx_mq_mode {
 struct rte_eth_rxmode {
 	/** The multi-queue packet distribution mode to be used, e.g. RSS. */
 	enum rte_eth_rx_mq_mode mq_mode;
-	uint32_t max_rx_pkt_len;  /**< Only used if JUMBO_FRAME enabled. */
+	uint32_t mtu;  /**< Requested MTU. */
 	/** Maximum allowed size of LRO aggregated packet. */
 	uint32_t max_lro_pkt_size;
 	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
diff --git a/lib/ethdev/rte_ethdev_trace.h b/lib/ethdev/rte_ethdev_trace.h
index 0036bda7465c..1491c815c312 100644
--- a/lib/ethdev/rte_ethdev_trace.h
+++ b/lib/ethdev/rte_ethdev_trace.h
@@ -28,7 +28,7 @@ RTE_TRACE_POINT(
 	rte_trace_point_emit_u16(nb_tx_q);
 	rte_trace_point_emit_u32(dev_conf->link_speeds);
 	rte_trace_point_emit_u32(dev_conf->rxmode.mq_mode);
-	rte_trace_point_emit_u32(dev_conf->rxmode.max_rx_pkt_len);
+	rte_trace_point_emit_u32(dev_conf->rxmode.mtu);
 	rte_trace_point_emit_u64(dev_conf->rxmode.offloads);
 	rte_trace_point_emit_u32(dev_conf->txmode.mq_mode);
 	rte_trace_point_emit_u64(dev_conf->txmode.offloads);
-- 
2.31.1


  parent reply	other threads:[~2021-10-11 23:54 UTC|newest]

Thread overview: 112+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-09 17:29 [dpdk-dev] [PATCH 1/4] " Ferruh Yigit
2021-07-09 17:29 ` [dpdk-dev] [PATCH 2/4] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-07-13 13:48   ` Andrew Rybchenko
2021-07-21 12:26     ` Ferruh Yigit
2021-07-18  7:49   ` Xu, Rosen
2021-07-19 14:38   ` Ajit Khaparde
2021-07-09 17:29 ` [dpdk-dev] [PATCH 3/4] ethdev: move check to library for MTU set Ferruh Yigit
2021-07-13 13:56   ` Andrew Rybchenko
2021-07-18  7:52   ` Xu, Rosen
2021-07-09 17:29 ` [dpdk-dev] [PATCH 4/4] ethdev: remove jumbo offload flag Ferruh Yigit
2021-07-13 14:07   ` Andrew Rybchenko
2021-07-21 12:26     ` Ferruh Yigit
2021-07-21 12:39     ` Ferruh Yigit
2021-07-18  7:53   ` Xu, Rosen
2021-07-13 12:47 ` [dpdk-dev] [PATCH 1/4] ethdev: fix max Rx packet length Andrew Rybchenko
2021-07-21 16:46   ` Ferruh Yigit
2021-07-22  1:31     ` Ajit Khaparde
2021-07-22 10:27       ` Ferruh Yigit
2021-07-22 10:38         ` Andrew Rybchenko
2021-07-18  7:45 ` Xu, Rosen
2021-07-19  3:35 ` Huisong Li
2021-07-21 15:29   ` Ferruh Yigit
2021-07-22  7:21     ` Huisong Li
2021-07-22 10:12       ` Ferruh Yigit
2021-07-22 10:15         ` Andrew Rybchenko
2021-07-22 14:43           ` Stephen Hemminger
2021-09-17  1:08             ` Min Hu (Connor)
2021-09-17  8:04               ` Ferruh Yigit
2021-09-17  8:16                 ` Min Hu (Connor)
2021-09-17  8:17                 ` Min Hu (Connor)
2021-07-22 17:21 ` [dpdk-dev] [PATCH v2 1/6] " Ferruh Yigit
2021-07-22 17:21   ` [dpdk-dev] [PATCH v2 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-07-22 17:21   ` [dpdk-dev] [PATCH v2 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-07-22 17:21   ` [dpdk-dev] [PATCH v2 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
2021-07-22 17:21   ` [dpdk-dev] [PATCH v2 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-07-23  3:29     ` Huisong Li
2021-07-22 17:21   ` [dpdk-dev] [PATCH v2 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-01 14:36   ` [dpdk-dev] [PATCH v3 1/6] ethdev: fix max Rx packet length Ferruh Yigit
2021-10-01 14:36     ` [dpdk-dev] [PATCH v3 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-10-04  5:08       ` Somnath Kotur
2021-10-01 14:36     ` [dpdk-dev] [PATCH v3 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-10-04  5:09       ` Somnath Kotur
2021-10-01 14:36     ` [dpdk-dev] [PATCH v3 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
     [not found]       ` <CAOBf=muYkU2dwgi3iC8Q7pdSNTJsMUwWYdXj14KeN_=_mUGa0w@mail.gmail.com>
2021-10-04  7:55         ` Somnath Kotur
2021-10-05 16:48           ` Ferruh Yigit
2021-10-01 14:36     ` [dpdk-dev] [PATCH v3 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-10-01 14:36     ` [dpdk-dev] [PATCH v3 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-01 15:07     ` [dpdk-dev] [PATCH v3 1/6] ethdev: fix max Rx packet length Stephen Hemminger
2021-10-05 16:46       ` Ferruh Yigit
2021-10-05 17:16     ` [dpdk-dev] [PATCH v4 " Ferruh Yigit
2021-10-05 17:16       ` [dpdk-dev] [PATCH v4 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-10-08  8:39         ` Xu, Rosen
2021-10-05 17:16       ` [dpdk-dev] [PATCH v4 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-10-05 17:16       ` [dpdk-dev] [PATCH v4 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
2021-10-08  8:38         ` Xu, Rosen
2021-10-05 17:16       ` [dpdk-dev] [PATCH v4 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-10-05 17:16       ` [dpdk-dev] [PATCH v4 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-05 22:07       ` [dpdk-dev] [PATCH v4 1/6] ethdev: fix max Rx packet length Ajit Khaparde
2021-10-06  6:08         ` Somnath Kotur
2021-10-08  8:36       ` Xu, Rosen
2021-10-10  6:30       ` Matan Azrad
2021-10-11 21:59         ` Ferruh Yigit
2021-10-12  7:03           ` Matan Azrad
2021-10-12 11:03             ` Ferruh Yigit
2021-10-07 16:56     ` [dpdk-dev] [PATCH v5 " Ferruh Yigit
2021-10-07 16:56       ` [dpdk-dev] [PATCH v5 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-10-08 17:20         ` Ananyev, Konstantin
2021-10-09 10:58         ` lihuisong (C)
2021-10-07 16:56       ` [dpdk-dev] [PATCH v5 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-10-08 17:19         ` Ananyev, Konstantin
2021-10-07 16:56       ` [dpdk-dev] [PATCH v5 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
2021-10-08 17:11         ` Ananyev, Konstantin
2021-10-09 11:09           ` lihuisong (C)
2021-10-10  5:46         ` Matan Azrad
2021-10-07 16:56       ` [dpdk-dev] [PATCH v5 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-10-08 16:51         ` Ananyev, Konstantin
2021-10-11 19:50           ` Ferruh Yigit
2021-10-09 11:43         ` lihuisong (C)
2021-10-11 20:15           ` Ferruh Yigit
2021-10-12  4:02             ` lihuisong (C)
2021-10-07 16:56       ` [dpdk-dev] [PATCH v5 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-08 16:53         ` Ananyev, Konstantin
2021-10-08 15:57       ` [dpdk-dev] [PATCH v5 1/6] ethdev: fix max Rx packet length Ananyev, Konstantin
2021-10-11 19:47         ` Ferruh Yigit
2021-10-09 10:56       ` lihuisong (C)
2021-10-11 23:53     ` Ferruh Yigit [this message]
2021-10-11 23:53       ` [dpdk-dev] [PATCH v6 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-10-11 23:53       ` [dpdk-dev] [PATCH v6 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-10-11 23:53       ` [dpdk-dev] [PATCH v6 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
2021-10-12 17:20         ` Hyong Youb Kim (hyonkim)
2021-10-13  7:16         ` Michał Krawczyk
2021-10-11 23:53       ` [dpdk-dev] [PATCH v6 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-10-12  5:58         ` Andrew Rybchenko
2021-10-11 23:53       ` [dpdk-dev] [PATCH v6 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-12  6:02       ` [dpdk-dev] [PATCH v6 1/6] ethdev: fix max Rx packet length Andrew Rybchenko
2021-10-12  9:42       ` Ananyev, Konstantin
2021-10-13  7:08       ` Xu, Rosen
2021-10-15  1:31       ` Hyong Youb Kim (hyonkim)
2021-10-16  0:24       ` Ferruh Yigit
2021-10-18  8:54         ` Ferruh Yigit
2021-10-18 13:48     ` [dpdk-dev] [PATCH v7 " Ferruh Yigit
2021-10-18 13:48       ` [dpdk-dev] [PATCH v7 2/6] ethdev: move jumbo frame offload check to library Ferruh Yigit
2021-10-18 13:48       ` [dpdk-dev] [PATCH v7 3/6] ethdev: move check to library for MTU set Ferruh Yigit
2021-10-18 13:48       ` [dpdk-dev] [PATCH v7 4/6] ethdev: remove jumbo offload flag Ferruh Yigit
2021-10-21  0:43         ` Thomas Monjalon
2021-10-22 11:25           ` Ferruh Yigit
2021-10-22 11:29             ` Andrew Rybchenko
2021-10-18 13:48       ` [dpdk-dev] [PATCH v7 5/6] ethdev: unify MTU checks Ferruh Yigit
2021-10-18 13:48       ` [dpdk-dev] [PATCH v7 6/6] examples/ip_reassembly: remove unused parameter Ferruh Yigit
2021-10-18 17:31       ` [dpdk-dev] [PATCH v7 1/6] ethdev: fix max Rx packet length Ferruh Yigit
2021-11-05 14:19         ` Xueming(Steven) Li
2021-11-05 14:39           ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211011235345.851742-1-ferruh.yigit@intel.com \
    --to=ferruh.yigit@intel.com \
    --cc=aboyer@pensando.io \
    --cc=ajit.khaparde@broadcom.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=asomalap@amd.com \
    --cc=beilei.xing@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=chas3@att.com \
    --cc=chenbo.xia@intel.com \
    --cc=cloud.wangxiaoyun@huawei.com \
    --cc=cristian.dumitrescu@intel.com \
    --cc=david.hunt@intel.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=dsinghrawat@marvell.com \
    --cc=evgenys@amazon.com \
    --cc=g.singh@nxp.com \
    --cc=gakhil@marvell.com \
    --cc=haiyue.wang@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=heinrich.kuhn@corigine.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=hkalra@marvell.com \
    --cc=humin29@huawei.com \
    --cc=hyonkim@cisco.com \
    --cc=igorch@amazon.com \
    --cc=irusskikh@marvell.com \
    --cc=jasvinder.singh@intel.com \
    --cc=jerinj@marvell.com \
    --cc=jianwang@trustnetic.com \
    --cc=jiawenwu@trustnetic.com \
    --cc=jingjing.wu@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=johndale@cisco.com \
    --cc=keith.wiles@intel.com \
    --cc=kirankumark@marvell.com \
    --cc=kirill.rybalchenko@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=lihuisong@huawei.com \
    --cc=lironh@marvell.com \
    --cc=matan@nvidia.com \
    --cc=matt.peters@windriver.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mczekaj@marvell.com \
    --cc=mdr@ashroe.eu \
    --cc=mk@semihalf.com \
    --cc=mw@semihalf.com \
    --cc=ndabilpuram@marvell.com \
    --cc=nicolas.chautru@intel.com \
    --cc=oulijun@huawei.com \
    --cc=pbhagavatula@marvell.com \
    --cc=qi.z.zhang@intel.com \
    --cc=qiming.yang@intel.com \
    --cc=radu.nicolau@intel.com \
    --cc=rahul.lakkireddy@chelsio.com \
    --cc=rmody@marvell.com \
    --cc=rosen.xu@intel.com \
    --cc=sachin.saxena@oss.nxp.com \
    --cc=shaibran@amazon.com \
    --cc=shshaikh@marvell.com \
    --cc=skori@marvell.com \
    --cc=skoteshwar@marvell.com \
    --cc=somnath.kotur@broadcom.com \
    --cc=srinivasan@marvell.com \
    --cc=steven.webster@windriver.com \
    --cc=sthotton@marvell.com \
    --cc=thomas@monjalon.net \
    --cc=tomasz.kantecki@intel.com \
    --cc=viacheslavo@nvidia.com \
    --cc=xiao.w.wang@intel.com \
    --cc=xiaoyun.li@intel.com \
    --cc=xuanziyang2@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    --cc=zhouguoyang@huawei.com \
    --cc=zr@semihalf.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).