From: Ciara Power <ciara.power@intel.com>
To: Akhil Goyal <gakhil@marvell.com>, Fan Zhang <roy.fan.zhang@intel.com>
Cc: dev@dpdk.org, kai.ji@intel.com, pablo.de.lara.guarch@intel.com,
ktejasree@marvell.com, Ciara Power <ciara.power@intel.com>,
arkadiuszx.kusztal@intel.com, stable@dpdk.org
Subject: [PATCH 1/2] test/crypto: fix zuc test vector IV format
Date: Thu, 23 Jun 2022 14:42:49 +0000 [thread overview]
Message-ID: <20220623144250.1259901-2-ciara.power@intel.com> (raw)
In-Reply-To: <20220623144250.1259901-1-ciara.power@intel.com>
Some authentication and cipher IV formats were not following the spec [1].
For ZUC128 cipher IV, an 8 byte block is repeated,
with the last 3 bytes of each being 0x0.
IV[4] and IV[12] must have the last 2 bits set to 0.
Auth IVs must also have repeated bytes with the last 3 bytes
containing 0x0 in each 8 byte block.
IV[4] and IV[12] must have the last 3 bits set to 0.
IV[8] and IV[14] may have a flipped bit based on direction.
[1] https://www.gsma.com/security/wp-content/uploads/2019/05/EEA3_EIA3_specification_v1_8.pdf
Fixes: a81a81850fb1 ("test/crypto: add ZUC test cases for QAT")
Fixes: b1c1df46878d ("test/crypto: add ZUC test cases for auth-cipher")
Cc: arkadiuszx.kusztal@intel.com
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
---
app/test/test_cryptodev_zuc_test_vectors.h | 54 +++++++++++-----------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/app/test/test_cryptodev_zuc_test_vectors.h b/app/test/test_cryptodev_zuc_test_vectors.h
index 5d1d264579..299d7649fe 100644
--- a/app/test/test_cryptodev_zuc_test_vectors.h
+++ b/app/test/test_cryptodev_zuc_test_vectors.h
@@ -558,13 +558,13 @@ static struct wireless_test_data zuc_test_case_cipher_200b_auth_200b = {
},
.auth_iv = {
.data = {
- 0xFA, 0x55, 0x6B, 0x26, 0x1C, 0x00, 0x00, 0x00,
- 0xFA, 0x55, 0x6B, 0x26, 0x1C, 0x00, 0x00, 0x00
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00,
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00
},
.len = 16
},
.digest = {
- .data = {0x01, 0xFE, 0x5E, 0x38},
+ .data = {0x2F, 0x45, 0x7D, 0x7B},
.len = 4
},
.validAuthLenInBits = {
@@ -631,13 +631,13 @@ static struct wireless_test_data zuc_test_case_cipher_800b_auth_120b = {
},
.auth_iv = {
.data = {
- 0xFA, 0x55, 0x6B, 0x26, 0x1C, 0x00, 0x00, 0x00,
- 0xFA, 0x55, 0x6B, 0x26, 0x1C, 0x00, 0x00, 0x00
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00,
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00
},
.len = 16
},
.digest = {
- .data = {0x9D, 0x42, 0x1C, 0xEA},
+ .data = {0xCA, 0xBB, 0x8D, 0x94},
.len = 4
},
.validAuthLenInBits = {
@@ -1166,15 +1166,15 @@ struct wireless_test_data zuc_auth_cipher_test_case_1 = {
},
.cipher_iv = {
.data = {
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ 0x66, 0x03, 0x54, 0x92, 0x78, 0x00, 0x00, 0x00,
+ 0x66, 0x03, 0x54, 0x92, 0x78, 0x00, 0x00, 0x00
},
.len = 16
},
.auth_iv = {
.data = {
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00,
+ 0xFA, 0x55, 0x6B, 0x26, 0x18, 0x00, 0x00, 0x00
},
.len = 16
},
@@ -1201,22 +1201,22 @@ struct wireless_test_data zuc_auth_cipher_test_case_1 = {
},
.ciphertext = {
.data = {
- 0x5A, 0x5A, 0xDB, 0x3D, 0xD5, 0xB7, 0xB9, 0x58,
- 0xA5, 0xD3, 0xE3, 0xF9, 0x18, 0x73, 0xB4, 0x74,
- 0x05, 0xF0, 0xE9, 0xB6, 0x5D, 0x9A, 0xE3, 0xFA,
- 0x5D, 0xFD, 0x24, 0x51, 0xAD, 0x73, 0xCA, 0x64,
- 0x91, 0xD5, 0xB3, 0x94, 0x10, 0x91, 0x89, 0xEA,
- 0x73, 0x6F, 0xB0, 0x2A, 0x0A, 0x63, 0x0F, 0x8D,
- 0x64, 0x87, 0xA3, 0x14, 0x6B, 0x93, 0x31, 0x0F,
- 0x14, 0xAD, 0xEA, 0x62, 0x80, 0x3F, 0x44, 0xDD,
- 0x4E, 0x30, 0xFA, 0xC8, 0x0E, 0x5F, 0x46, 0xE7,
- 0x60, 0xEC, 0xDF, 0x8B, 0x94, 0x7D, 0x2E, 0x63,
- 0x48, 0xD9, 0x69, 0x06, 0x13, 0xF2, 0x20, 0x49,
- 0x54, 0xA6, 0xD4, 0x98, 0xF4, 0xF6, 0x1D, 0x4A,
- 0xC9, 0xA5, 0xDA, 0x46, 0x3D, 0xD9, 0x02, 0x47,
- 0x1C, 0x20, 0x73, 0x35, 0x17, 0x1D, 0x81, 0x8D,
- 0x2E, 0xCD, 0x70, 0x37, 0x22, 0x55, 0x3C, 0xF3,
- 0xDA, 0x70, 0x42, 0x12, 0x0E, 0xAA, 0xC4, 0xAB
+ 0x5A, 0x5A, 0x94, 0xE7, 0xB8, 0xD7, 0x4E, 0xBB,
+ 0x4C, 0xC3, 0xD1, 0x16, 0xFC, 0x8C, 0xE4, 0x27,
+ 0x44, 0xEC, 0x04, 0x26, 0x60, 0x9C, 0xFF, 0x81,
+ 0xB6, 0x2B, 0x48, 0x1D, 0xEE, 0x26, 0xF7, 0x58,
+ 0x40, 0x38, 0x58, 0xEA, 0x22, 0x23, 0xE6, 0x34,
+ 0x9A, 0x69, 0x32, 0x68, 0xBD, 0xDD, 0x7D, 0xA3,
+ 0xC0, 0x04, 0x79, 0xF0, 0xF1, 0x58, 0x78, 0x5E,
+ 0xD0, 0xDF, 0x27, 0x9A, 0x53, 0x70, 0x5D, 0xFB,
+ 0x1B, 0xCA, 0xBA, 0x97, 0x12, 0x1F, 0x59, 0x6B,
+ 0x75, 0x7B, 0x94, 0xF6, 0xE7, 0xFA, 0x49, 0x6B,
+ 0x7D, 0x7F, 0x8F, 0x0F, 0x78, 0x56, 0x40, 0x52,
+ 0x84, 0x3E, 0xA9, 0xE8, 0x84, 0x6F, 0xEF, 0xFB,
+ 0x4A, 0x48, 0x3A, 0x4C, 0x81, 0x98, 0xDD, 0x17,
+ 0x89, 0x66, 0x3B, 0xC0, 0xEC, 0x71, 0xDB, 0xF6,
+ 0x44, 0xDF, 0xA7, 0x97, 0xB2, 0x9B, 0x84, 0xA7,
+ 0x2D, 0x2D, 0xC1, 0x93, 0x12, 0x37, 0xEA, 0xD2
},
.len = 128 << 3
},
@@ -1233,7 +1233,7 @@ struct wireless_test_data zuc_auth_cipher_test_case_1 = {
.len = 2 << 3
},
.digest = {
- .data = {0x0E, 0xAA, 0xC4, 0xAB},
+ .data = {0x12, 0x37, 0xEA, 0xD2},
.len = 4,
.offset_bytes = 124
}
--
2.25.1
next parent reply other threads:[~2022-06-23 14:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220623144250.1259901-1-ciara.power@intel.com>
2022-06-23 14:42 ` Ciara Power [this message]
2022-06-27 6:00 ` [EXT] " Tejasree Kondoj
2022-06-23 14:42 ` [PATCH 2/2] test/crypto: fix snow3g " Ciara Power
2022-06-27 6:00 ` [EXT] " Tejasree Kondoj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220623144250.1259901-2-ciara.power@intel.com \
--to=ciara.power@intel.com \
--cc=arkadiuszx.kusztal@intel.com \
--cc=dev@dpdk.org \
--cc=gakhil@marvell.com \
--cc=kai.ji@intel.com \
--cc=ktejasree@marvell.com \
--cc=pablo.de.lara.guarch@intel.com \
--cc=roy.fan.zhang@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).