From: Weiyuan Li <weiyuanx.li@intel.com>
To: dts@dpdk.org
Cc: Weiyuan Li <weiyuanx.li@intel.com>, Jiale Song <songx.jiale@intel.com>
Subject: [dts][PATCH V3 02/10] test_plans/vf_offload: update dts code for dpdk csum change
Date: Tue, 30 Aug 2022 10:47:32 +0800 [thread overview]
Message-ID: <20220830024740.26250-2-weiyuanx.li@intel.com> (raw)
In-Reply-To: <20220830024740.26250-1-weiyuanx.li@intel.com>
According to dpdk commit 9b4ea7ae77fa(app/testpmd: revert MAC update in checksum forwarding) modify
the script adapt to this chagne.
1. Modify VF case to enable promisc.
2. Modify PF case to send packet dst mac is random.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
Tested-by: Jiale Song < songx.jiale@intel.com>
v2:
-Enable promisc mode in testpmd
v3:
-Test plan csum add enable promisc mode
test_plans/vf_offload_test_plan.rst | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/test_plans/vf_offload_test_plan.rst b/test_plans/vf_offload_test_plan.rst
index 522fc017..ba490e06 100644
--- a/test_plans/vf_offload_test_plan.rst
+++ b/test_plans/vf_offload_test_plan.rst
@@ -17,6 +17,11 @@ to the device under test::
modprobe vfio-pci
usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
+IP link set VF trust on and spoofchk off on DUT::
+
+ ip link set $PF_INTF vf 0 trust on
+ ip link set $PF_INTF vf 0 spoofchk off
+
Assuming that ports ``0`` and ``1`` are connected to a traffic generator,
enable hardware rx checksum offload with "--enable-rx-cksum",
launch the ``testpmd`` with the following arguments::
@@ -71,6 +76,7 @@ Enable the IPv4/UDP/TCP/SCTP HW checksum offload on port 0::
testpmd> csum set udp hw 0
testpmd> csum set sctp hw 0
testpmd> port start all
+ testpmd> set promisc 0 on
testpmd> start
csum packet forwarding - CRC stripping disabled - packets/burst=32
nb forwarding cores=1 - nb forwarding ports=10
@@ -110,6 +116,7 @@ Enable the IPv4/UDP/TCP/SCTP SW checksum offload on port 0::
testpmd> csum set udp sw 0
testpmd> csum set sctp sw 0
testpmd> port start all
+ testpmd> set promisc 0 on
testpmd> start
csum packet forwarding - CRC stripping disabled - packets/burst=32
nb forwarding cores=1 - nb forwarding ports=10
@@ -154,6 +161,7 @@ and checksum on rx port. The test commands is below::
testpmd> csum set udp hw 0
testpmd> csum set sctp hw 0
testpmd> port start all
+ testpmd> set promisc 0 on
testpmd> set fwd csum
# Enable TSO on tx port
@@ -185,6 +193,7 @@ Launch the userland ``testpmd`` application on DUT as follows::
testpmd> csum set tcp hw 0
testpmd> csum set udp hw 0
testpmd> csum set sctp hw 0
+ testpmd> set promisc 0 on
testpmd> port start all
# Enable TSO on tx port
--
2.27.0
next prev parent reply other threads:[~2022-08-30 2:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 2:47 [dts][PATCH V3 01/10] tests/vf_offload: " Weiyuan Li
2022-08-30 2:47 ` Weiyuan Li [this message]
2022-08-30 3:06 ` [dts][PATCH V3 02/10] test_plans/vf_offload: " Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 03/10] tests/checksum_offload: " Weiyuan Li
2022-08-30 3:06 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 04/10] tests/ice_advanced_iavf_rss: " Weiyuan Li
2022-08-30 3:06 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 05/10] test_plans/ice_advanced_iavf_rss: " Weiyuan Li
2022-08-30 3:05 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 06/10] tests/ice_advanced_rss: " Weiyuan Li
2022-08-30 3:11 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 07/10] test_plans/ice_advanced_rss: " Weiyuan Li
2022-08-30 3:09 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 08/10] tests/ice_iavf_fdir: " Weiyuan Li
2022-08-30 3:09 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 09/10] test_plans/ice_iavf_fdir: " Weiyuan Li
2022-08-30 3:10 ` Peng, Yuan
2022-08-30 2:47 ` [dts][PATCH V3 10/10] tests/tx_preparation: " Weiyuan Li
2022-08-30 3:10 ` Peng, Yuan
2022-09-02 1:44 ` lijuan.tu
2022-08-30 3:05 ` [dts][PATCH V3 01/10] tests/vf_offload: " Peng, Yuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220830024740.26250-2-weiyuanx.li@intel.com \
--to=weiyuanx.li@intel.com \
--cc=dts@dpdk.org \
--cc=songx.jiale@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).