From: Ke Xu <ke1.xu@intel.com>
To: dts@dpdk.org
Cc: lijuan.tu@intel.com, jin.ling@intel.com, zhiminx.huang@intel.com,
weiyuanx.li@intel.com, qi.fu@intel.com, Ke Xu <ke1.xu@intel.com>
Subject: [DTS][PATCH V1 17/21] tests/ice_qinq: update test plan to support represented port action from deprecated vf action
Date: Wed, 28 Sep 2022 03:18:51 +0000 [thread overview]
Message-ID: <20220928031836.770004-18-ke1.xu@intel.com> (raw)
In-Reply-To: <20220928031836.770004-1-ke1.xu@intel.com>
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
tests/TestSuite_ice_qinq.py | 96 ++++++++++++++++++-------------------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/tests/TestSuite_ice_qinq.py b/tests/TestSuite_ice_qinq.py
index c6123643..8dde338a 100644
--- a/tests/TestSuite_ice_qinq.py
+++ b/tests/TestSuite_ice_qinq.py
@@ -15,7 +15,7 @@ from .rte_flow_common import RssProcessing
mac_qinq_ipv4_pay_src_ip = {
"name": "mac_qinq_ipv4_pay_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)'
@@ -27,12 +27,12 @@ mac_qinq_ipv4_pay_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay_dst_ip = {
"name": "mac_qinq_ipv4_pay_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)'
@@ -44,12 +44,12 @@ mac_qinq_ipv4_pay_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP(dst="196.222.232.221")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay_dest_mac = {
"name": "mac_qinq_ipv4_pay_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/("X"*480)'
@@ -60,7 +60,7 @@ mac_qinq_ipv4_pay_dest_mac = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x0800)/IP()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv4_pay = [
@@ -71,7 +71,7 @@ mac_qinq_ipv4_pay = [
mac_qinq_ipv6_pay_src_ip = {
"name": "mac_qinq_ipv6_pay_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'
@@ -83,12 +83,12 @@ mac_qinq_ipv6_pay_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay_dst_ip = {
"name": "mac_qinq_ipv6_pay_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)'
@@ -100,12 +100,12 @@ mac_qinq_ipv6_pay_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay_dest_mac = {
"name": "mac_qinq_ipv6_pay_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6()/("X"*480)'
@@ -116,7 +116,7 @@ mac_qinq_ipv6_pay_dest_mac = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x86DD)/IPv6()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_ipv6_pay = [
@@ -128,7 +128,7 @@ mac_qinq_ipv6_pay = [
mac_qinq_pppoe_pay = [
{
"name": "mac_qinq_pppoe_pay",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)',
@@ -145,14 +145,14 @@ mac_qinq_pppoe_pay = [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
]
mac_qinq_pppoe_proto = [
{
"name": "mac_qinq_pppoe_proto",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)'
@@ -165,13 +165,13 @@ mac_qinq_pppoe_proto = [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
]
mac_qinq_pppoe_ipv4_src_ip = {
"name": "mac_qinq_pppoe_ipv4_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)'
@@ -184,12 +184,12 @@ mac_qinq_pppoe_ipv4_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(src="196.222.232.221")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4_dst_ip = {
"name": "mac_qinq_pppoe_ipv4_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)'
@@ -202,12 +202,12 @@ mac_qinq_pppoe_ipv4_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP(dst="196.222.232.221")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4_dest_mac = {
"name": "mac_qinq_pppoe_ipv4_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/UDP(dport=23)/("X"*480)'
@@ -220,7 +220,7 @@ mac_qinq_pppoe_ipv4_dest_mac = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x21\')/IP()/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv4 = [
@@ -231,7 +231,7 @@ mac_qinq_pppoe_ipv4 = [
mac_qinq_pppoe_ipv6_src_ip = {
"name": "mac_qinq_pppoe_ipv6_src_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'
@@ -244,12 +244,12 @@ mac_qinq_pppoe_ipv6_src_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(src="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6_dst_ip = {
"name": "mac_qinq_pppoe_ipv6_dst_ip",
- "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)'
@@ -262,12 +262,12 @@ mac_qinq_pppoe_ipv6_dst_ip = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x2,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6(dst="1111:2222:3333:4444:5555:6666:7777:8888")/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6_dest_mac = {
"name": "mac_qinq_pppoe_ipv6_dest_mac",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/UDP(dport=23)/("X"*480)'
@@ -280,7 +280,7 @@ mac_qinq_pppoe_ipv6_dest_mac = {
'Ether(dst="00:11:22:33:44:33",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x8864)/PPPoE(sessionid=0x1)/PPP(b\'\\x00\\x57\')/IPv6()/UDP(dport=23)/("X"*480)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
mac_qinq_pppoe_ipv6 = [
@@ -292,7 +292,7 @@ mac_qinq_pppoe_ipv6 = [
# Non-pipeline mode
tv_mac_qinq_ipv4 = {
"name": "tv_mac_qinq_ipv4",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.1", dst="192.168.1.2")/("X"*80)'
@@ -304,12 +304,12 @@ tv_mac_qinq_ipv4 = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP(src="192.168.1.3", dst="192.168.1.2")/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv6 = {
"name": "tv_mac_qinq_ipv6",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*80)'
@@ -321,12 +321,12 @@ tv_mac_qinq_ipv6 = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv4_udp = {
"name": "tv_mac_qinq_ipv4_udp",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / udp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=23)/("X"*80)'
@@ -338,12 +338,12 @@ tv_mac_qinq_ipv4_udp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/UDP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv4_tcp = {
"name": "tv_mac_qinq_ipv4_tcp",
- "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / tcp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=23)/("X"*80)'
@@ -355,7 +355,7 @@ tv_mac_qinq_ipv4_tcp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x0800)/IP()/TCP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tvs_mac_l4_qinq_dcf_non_pipeline_mode = [
@@ -368,7 +368,7 @@ tvs_mac_l4_qinq_dcf_non_pipeline_mode = [
# Pipeline mode
tv_mac_qinq_ipv6_udp = {
"name": "tv_mac_qinq_ipv6_udp",
- "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / udp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=50,dport=23)/("X"*80)'
@@ -380,12 +380,12 @@ tv_mac_qinq_ipv6_udp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tv_mac_qinq_ipv6_tcp = {
"name": "tv_mac_qinq_ipv6_tcp",
- "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions vf id 1 / end",
+ "rule": "flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 / tcp src is 50 dst is 23 / end actions represented_port ethdev_port_id 1 / end",
"scapy_str": {
"matched": [
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=50,dport=23)/("X"*80)'
@@ -397,7 +397,7 @@ tv_mac_qinq_ipv6_tcp = {
'Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8100)/Dot1Q(vlan=0x1,type=0x86DD)/IPv6(dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=50,dport=22)/("X"*80)',
],
},
- "check_param": {"port_id": 1},
+ "check_param": {"port_id": 2},
}
tvs_mac_l4_qinq_dcf_pipeline_mode = [tv_mac_qinq_ipv6_udp, tv_mac_qinq_ipv6_tcp]
@@ -723,7 +723,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_IPV4_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_ipv4_pay)
def test_mac_qinq_ipv6_pay(self):
@@ -731,7 +731,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_IPV6_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_ipv6_pay)
@skip_unsupported_pkg("os default")
@@ -740,7 +740,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_PAY
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_pay)
@skip_unsupported_pkg("os default")
@@ -749,7 +749,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_PAY_Proto
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_proto)
@skip_unsupported_pkg("os default")
@@ -758,7 +758,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_IPV4
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv4)
@skip_unsupported_pkg("os default")
@@ -767,7 +767,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_QINQ_PPPOE_IPV6
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(mac_qinq_pppoe_ipv6)
def test_mac_l4_qinq_dcf_non_pipeline_mode(self):
@@ -775,7 +775,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_L4_QINQ
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_non_pipeline_mode)
def test_mac_l4_qinq_dcf_pipeline_mode(self):
@@ -783,7 +783,7 @@ class TestICEQinq(TestCase):
DCF switch for MAC_L4_QINQ_IPV6
"""
self.setup_pf_vfs_env()
- self.launch_testpmd()
+ self.launch_testpmd(dcf_param = True)
self._rte_flow_validate_pattern(tvs_mac_l4_qinq_dcf_pipeline_mode)
def reset_vf(self):
--
2.25.1
next prev parent reply other threads:[~2022-09-28 3:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 3:18 [DTS][PATCH V1 00/21] update test plans and tests to support represented port action and port representor action from deprecated vf action on DCF cases Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 02/21] test_plans/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 03/21] test_plans/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 04/21] test_plans/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 05/21] test_plans/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 06/21] test_plans/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 07/21] test_plans/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 08/21] test_plans/ice_dcf_acl_filter: remove redundant white space Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 09/21] test_plans/dcf_lifecycle: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 10/21] test_plans/ice_dcf_data_path: update test plan to support port representor action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 11/21] tests/dcf_lifecycle: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 12/21] tests/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 13/21] tests/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 14/21] tests/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 15/21] tests/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 16/21] tests/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` Ke Xu [this message]
2022-09-28 3:18 ` [DTS][PATCH V1 18/21] tests/ice_dcf_data_path: update test plan to support port representor " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 19/21] test_plans/ice_dcf_switch_filter: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 20/21] test/ice_dcf_switch_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 21/21] test_plans/ice_dcf_switch_filter: add white space to formate the table Ke Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928031836.770004-18-ke1.xu@intel.com \
--to=ke1.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jin.ling@intel.com \
--cc=lijuan.tu@intel.com \
--cc=qi.fu@intel.com \
--cc=weiyuanx.li@intel.com \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).