From: Ke Xu <ke1.xu@intel.com>
To: dts@dpdk.org
Cc: lijuan.tu@intel.com, jin.ling@intel.com, zhiminx.huang@intel.com,
weiyuanx.li@intel.com, qi.fu@intel.com, Ke Xu <ke1.xu@intel.com>
Subject: [DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action
Date: Wed, 28 Sep 2022 03:18:19 +0000 [thread overview]
Message-ID: <20220928031836.770004-2-ke1.xu@intel.com> (raw)
In-Reply-To: <20220928031836.770004-1-ke1.xu@intel.com>
Signed-off-by: Jin Ling <jin.ling@intel.com>
Reviewed-by: Ke Xu <ke1.xu@intel.com>
---
test_plans/dcf_lifecycle_test_plan.rst | 84 +++++++++++++-------------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/test_plans/dcf_lifecycle_test_plan.rst b/test_plans/dcf_lifecycle_test_plan.rst
index 53837142..d1b19fe1 100644
--- a/test_plans/dcf_lifecycle_test_plan.rst
+++ b/test_plans/dcf_lifecycle_test_plan.rst
@@ -176,7 +176,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -187,7 +187,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 `0000:18:01.1` from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -228,7 +228,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -239,7 +239,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -277,7 +277,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -288,7 +288,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -353,7 +353,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1-2] --file-prefix=dcf -- -i
Launch another testpmd on the VF1 and VF2, and start mac forward ::
@@ -369,8 +369,8 @@ Launch another testpmd on the VF1 and VF2, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.5 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.5 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -421,9 +421,9 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1-2] --file-prefix=dcf -- -i
-Launch another testpmd on the VF1, and start mac forward ::
+Launch another testpmd on the VF1 and VF2, and start mac forward ::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 -a 18:01.2 --file-prefix=vf -- -i
set verbose 1
@@ -432,7 +432,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 and VF2 0000:18:01.2 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 and VF2 ::
@@ -1112,7 +1112,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf" for this test plan.
2. Launch another ``testpmd`` application on the VF1 of DUT as follows::
@@ -1134,7 +1134,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
5. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1142,7 +1142,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
6. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1191,7 +1191,7 @@ Test Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf" for this test plan.
3. Send a matched packet in scapy to VF1, DCF flow rule is still valid and check the VF1 of DUT can receive the packet.
@@ -1216,7 +1216,7 @@ the VF1 of DUT::
5. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1224,7 +1224,7 @@ the VF1 of DUT::
6. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1270,7 +1270,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1278,7 +1278,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1326,7 +1326,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1334,7 +1334,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1380,7 +1380,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1388,7 +1388,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1434,7 +1434,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1442,7 +1442,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1478,7 +1478,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf,representor=vf[1] -a 3b:01.1 --file-prefix=dcf" for this test plan.
2. Set verbose::
@@ -1491,7 +1491,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
4. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1499,7 +1499,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
5. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1542,7 +1542,7 @@ Test Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf,representor=vf[1] -a 3b:01.1 --file-prefix=dcf" for this test plan.
3. Set verbose::
@@ -1574,7 +1574,7 @@ DUT::
7. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1582,7 +1582,7 @@ DUT::
8. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1628,7 +1628,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1636,7 +1636,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1676,7 +1676,7 @@ Test Steps
testpmd> stop
testpmd> port stop 0
testpmd> port detach 0
- testpmd> port attach 3b:01.0,cap=dcf
+ testpmd> port attach 3b:01.0,cap=dcf,representor=vf[1]
testpmd> port reset 0
testpmd> port start 0
testpmd> start
@@ -1684,7 +1684,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1692,7 +1692,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1738,7 +1738,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1746,7 +1746,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1769,7 +1769,7 @@ DUT::
testpmd> port 1/queue 0: received 1 packets
src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
- ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+ ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
Test Case 10: one_testpmd_dcf_reset_mac
---------------------------------------
@@ -1792,7 +1792,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1800,7 +1800,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
--
2.25.1
next prev parent reply other threads:[~2022-09-28 3:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 3:18 [DTS][PATCH V1 00/21] update test plans and tests to support represented port action and port representor action from deprecated vf action on DCF cases Ke Xu
2022-09-28 3:18 ` Ke Xu [this message]
2022-09-28 3:18 ` [DTS][PATCH V1 02/21] test_plans/ice_dcf_acl_filter: update test plan to support represented port action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 03/21] test_plans/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 04/21] test_plans/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 05/21] test_plans/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 06/21] test_plans/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 07/21] test_plans/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 08/21] test_plans/ice_dcf_acl_filter: remove redundant white space Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 09/21] test_plans/dcf_lifecycle: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 10/21] test_plans/ice_dcf_data_path: update test plan to support port representor action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 11/21] tests/dcf_lifecycle: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 12/21] tests/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 13/21] tests/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 14/21] tests/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 15/21] tests/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 16/21] tests/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 17/21] tests/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 18/21] tests/ice_dcf_data_path: update test plan to support port representor " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 19/21] test_plans/ice_dcf_switch_filter: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 20/21] test/ice_dcf_switch_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 21/21] test_plans/ice_dcf_switch_filter: add white space to formate the table Ke Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928031836.770004-2-ke1.xu@intel.com \
--to=ke1.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jin.ling@intel.com \
--cc=lijuan.tu@intel.com \
--cc=qi.fu@intel.com \
--cc=weiyuanx.li@intel.com \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).