From: Ke Xu <ke1.xu@intel.com>
To: dts@dpdk.org
Cc: lijuan.tu@intel.com, jin.ling@intel.com, zhiminx.huang@intel.com,
weiyuanx.li@intel.com, qi.fu@intel.com, Ke Xu <ke1.xu@intel.com>
Subject: [DTS][PATCH V1 06/21] test_plans/ice_dcf_switch_filter_pppoe: update test plan to support represented port action from deprecated vf action
Date: Wed, 28 Sep 2022 03:18:29 +0000 [thread overview]
Message-ID: <20220928031836.770004-7-ke1.xu@intel.com> (raw)
In-Reply-To: <20220928031836.770004-1-ke1.xu@intel.com>
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
.../ice_dcf_switch_filter_pppoe_test_plan.rst | 284 +++++++++---------
1 file changed, 142 insertions(+), 142 deletions(-)
diff --git a/test_plans/ice_dcf_switch_filter_pppoe_test_plan.rst b/test_plans/ice_dcf_switch_filter_pppoe_test_plan.rst
index 6017edcd..e19e3a41 100644
--- a/test_plans/ice_dcf_switch_filter_pppoe_test_plan.rst
+++ b/test_plans/ice_dcf_switch_filter_pppoe_test_plan.rst
@@ -172,8 +172,8 @@ Prerequisites
9. Launch dpdk on VF0 and VF1, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -- -i
- testpmd> set portlist 1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf,representor=[1] -a 0000:18:01.1 -- -i
+ testpmd> set portlist 2
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -199,7 +199,7 @@ Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -213,7 +213,7 @@ Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -222,7 +222,7 @@ Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
@@ -230,7 +230,7 @@ Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -238,14 +238,14 @@ Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
======================================================
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -259,7 +259,7 @@ Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -268,7 +268,7 @@ Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
@@ -276,7 +276,7 @@ Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -284,14 +284,14 @@ Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
=================================================
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -305,7 +305,7 @@ Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -314,14 +314,14 @@ Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -329,14 +329,14 @@ Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
=================================================
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -350,7 +350,7 @@ Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -359,14 +359,14 @@ Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="enp27s0f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="enp27s0f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -374,7 +374,7 @@ Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Test case: PPPoE data
=====================
@@ -384,7 +384,7 @@ Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -398,7 +398,7 @@ Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -407,13 +407,13 @@ Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -421,14 +421,14 @@ Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
---------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -442,7 +442,7 @@ Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -451,7 +451,7 @@ Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -459,7 +459,7 @@ Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -467,14 +467,14 @@ Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
--------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -488,7 +488,7 @@ Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -497,7 +497,7 @@ Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -505,7 +505,7 @@ Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -513,14 +513,14 @@ Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
---------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -534,7 +534,7 @@ Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -543,7 +543,7 @@ Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -551,7 +551,7 @@ Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -559,14 +559,14 @@ Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
--------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -580,7 +580,7 @@ Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -589,7 +589,7 @@ Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -597,7 +597,7 @@ Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -605,14 +605,14 @@ Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
----------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -626,7 +626,7 @@ Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -635,14 +635,14 @@ Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55")/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -650,14 +650,14 @@ Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
---------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -671,7 +671,7 @@ Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -680,14 +680,14 @@ Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -695,14 +695,14 @@ Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
--------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -716,7 +716,7 @@ Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -725,7 +725,7 @@ Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -733,7 +733,7 @@ Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -741,14 +741,14 @@ Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
---------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -762,7 +762,7 @@ Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -771,14 +771,14 @@ Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -786,14 +786,14 @@ Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
---------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -807,7 +807,7 @@ Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -816,7 +816,7 @@ Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -824,7 +824,7 @@ Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -832,14 +832,14 @@ Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
----------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -853,7 +853,7 @@ Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -862,14 +862,14 @@ Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -877,14 +877,14 @@ Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
---------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -898,7 +898,7 @@ Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -907,7 +907,7 @@ Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -916,7 +916,7 @@ Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -924,14 +924,14 @@ Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
--------------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -945,7 +945,7 @@ Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -954,7 +954,7 @@ Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -963,7 +963,7 @@ Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -971,14 +971,14 @@ Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
---------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -992,7 +992,7 @@ Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1001,7 +1001,7 @@ Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1010,7 +1010,7 @@ Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1018,14 +1018,14 @@ Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
--------------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1039,7 +1039,7 @@ Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1048,7 +1048,7 @@ Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1057,7 +1057,7 @@ Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1065,14 +1065,14 @@ Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
----------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1086,7 +1086,7 @@ Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1095,13 +1095,13 @@ Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1109,14 +1109,14 @@ Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
---------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1130,7 +1130,7 @@ Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1139,7 +1139,7 @@ Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1147,7 +1147,7 @@ Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1155,14 +1155,14 @@ Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
--------------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1176,7 +1176,7 @@ Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1185,7 +1185,7 @@ Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1193,7 +1193,7 @@ Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1201,14 +1201,14 @@ Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
---------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1222,7 +1222,7 @@ Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1231,7 +1231,7 @@ Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1239,7 +1239,7 @@ Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1247,14 +1247,14 @@ Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
--------------------------------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1268,7 +1268,7 @@ Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
2. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1277,7 +1277,7 @@ Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1285,7 +1285,7 @@ Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1293,7 +1293,7 @@ Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Test case: PPPoE control
========================
@@ -1303,7 +1303,7 @@ Subcase 1: MAC_PPPOE_LCP_PAY
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1317,7 +1317,7 @@ Subcase 1: MAC_PPPOE_LCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1326,14 +1326,14 @@ Subcase 1: MAC_PPPOE_LCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1341,14 +1341,14 @@ Subcase 1: MAC_PPPOE_LCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 2: MAC_PPPOE_IPCP_PAY
-----------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1362,7 +1362,7 @@ Subcase 2: MAC_PPPOE_IPCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1371,14 +1371,14 @@ Subcase 2: MAC_PPPOE_IPCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1386,14 +1386,14 @@ Subcase 2: MAC_PPPOE_IPCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
---------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1407,7 +1407,7 @@ Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1416,7 +1416,7 @@ Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1424,7 +1424,7 @@ Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1432,14 +1432,14 @@ Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
----------------------------------
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions represented_port ethdev_port_id 1 / end
get the message::
@@ -1453,7 +1453,7 @@ Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
2. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions represented_port ethdev_port_id 1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1462,7 +1462,7 @@ Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check port 1 receive the packets.
+ check port 2 receive the packets.
send mismatched packets::
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
@@ -1470,7 +1470,7 @@ Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
- check the packets are not to port 1.
+ check the packets are not to port 2.
4. verify rules can be destroyed::
@@ -1478,4 +1478,4 @@ Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
testpmd> flow list 0
check the rule not exists in the list.
- send matched packets, check the packets are not to port 1.
+ send matched packets, check the packets are not to port 2.
--
2.25.1
next prev parent reply other threads:[~2022-09-28 3:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 3:18 [DTS][PATCH V1 00/21] update test plans and tests to support represented port action and port representor action from deprecated vf action on DCF cases Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 02/21] test_plans/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 03/21] test_plans/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 04/21] test_plans/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 05/21] test_plans/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` Ke Xu [this message]
2022-09-28 3:18 ` [DTS][PATCH V1 07/21] test_plans/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 08/21] test_plans/ice_dcf_acl_filter: remove redundant white space Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 09/21] test_plans/dcf_lifecycle: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 10/21] test_plans/ice_dcf_data_path: update test plan to support port representor action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 11/21] tests/dcf_lifecycle: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 12/21] tests/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 13/21] tests/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 14/21] tests/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 15/21] tests/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 16/21] tests/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 17/21] tests/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 18/21] tests/ice_dcf_data_path: update test plan to support port representor " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 19/21] test_plans/ice_dcf_switch_filter: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 20/21] test/ice_dcf_switch_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 21/21] test_plans/ice_dcf_switch_filter: add white space to formate the table Ke Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928031836.770004-7-ke1.xu@intel.com \
--to=ke1.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jin.ling@intel.com \
--cc=lijuan.tu@intel.com \
--cc=qi.fu@intel.com \
--cc=weiyuanx.li@intel.com \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).