DPDK patches and discussions
 help / color / mirror / Atom feed
From: Chengwen Feng <fengchengwen@huawei.com>
To: <thomas@monjalon.net>, <ferruh.yigit@xilinx.com>, <ferruh.yigit@amd.com>
Cc: <dev@dpdk.org>, <kalesh-anakkur.purayil@broadcom.com>,
	<somnath.kotur@broadcom.com>, <ajit.khaparde@broadcom.com>,
	<mdr@ashroe.eu>, <Andrew.Rybchenko@oktetlabs.ru>
Subject: [PATCH v11 1/5] ethdev: support get port error handling mode
Date: Sun, 9 Oct 2022 09:10:05 +0000	[thread overview]
Message-ID: <20221009091009.38978-2-fengchengwen@huawei.com> (raw)
In-Reply-To: <20221009091009.38978-1-fengchengwen@huawei.com>

This patch support gets port's error handling mode by
rte_eth_dev_info_get() API.

Currently, the defined modes include:
1) NONE: it means no error handling modes are supported by this port.
2) PASSIVE: passive error handling, after the PMD detect that a reset
is required, the PMD reports RTE_ETH_EVENT_INTR_RESET event, and
application invoke rte_eth_dev_reset() to recover the port.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
---
 app/test-pmd/config.c               |  2 ++
 drivers/net/e1000/igb_ethdev.c      |  2 ++
 drivers/net/ena/ena_ethdev.c        |  2 ++
 drivers/net/iavf/iavf_ethdev.c      |  2 ++
 drivers/net/ixgbe/ixgbe_ethdev.c    |  2 ++
 drivers/net/txgbe/txgbe_ethdev_vf.c |  2 ++
 lib/ethdev/rte_ethdev.h             | 22 +++++++++++++++++++++-
 7 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 841e8efe78..bd7f2ba257 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -921,6 +921,8 @@ port_infos_display(portid_t port_id)
 			printf("Switch Rx domain: %u\n",
 			       dev_info.switch_info.rx_domain);
 	}
+	if (dev_info.err_handle_mode == RTE_ETH_ERROR_HANDLE_MODE_PASSIVE)
+		printf("Device error handling mode: passive\n");
 }
 
 void
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index d6bcc5bf58..8858f975f8 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -2341,6 +2341,8 @@ eth_igbvf_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 	dev_info->rx_desc_lim = rx_desc_lim;
 	dev_info->tx_desc_lim = tx_desc_lim;
 
+	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
+
 	return 0;
 }
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 3e88bcda6c..efcb163027 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -2482,6 +2482,8 @@ static int ena_infos_get(struct rte_eth_dev *dev,
 	dev_info->default_rxportconf.ring_size = ENA_DEFAULT_RING_SIZE;
 	dev_info->default_txportconf.ring_size = ENA_DEFAULT_RING_SIZE;
 
+	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
+
 	return 0;
 }
 
diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index 782be82c7f..b1958e0474 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -1179,6 +1179,8 @@ iavf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
 		.nb_align = IAVF_ALIGN_RING_DESC,
 	};
 
+	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index bf70ee041d..fd06ddbe35 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -4056,6 +4056,8 @@ ixgbevf_dev_info_get(struct rte_eth_dev *dev,
 	dev_info->rx_desc_lim = rx_desc_lim;
 	dev_info->tx_desc_lim = tx_desc_lim;
 
+	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
+
 	return 0;
 }
 
diff --git a/drivers/net/txgbe/txgbe_ethdev_vf.c b/drivers/net/txgbe/txgbe_ethdev_vf.c
index f52cd8bc19..3b1f7c913b 100644
--- a/drivers/net/txgbe/txgbe_ethdev_vf.c
+++ b/drivers/net/txgbe/txgbe_ethdev_vf.c
@@ -521,6 +521,8 @@ txgbevf_dev_info_get(struct rte_eth_dev *dev,
 	dev_info->rx_desc_lim = rx_desc_lim;
 	dev_info->tx_desc_lim = tx_desc_lim;
 
+	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
+
 	return 0;
 }
 
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index e8d1e1c658..3443bf20e1 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -1629,6 +1629,22 @@ enum rte_eth_representor_type {
 	RTE_ETH_REPRESENTOR_PF,   /**< representor of Physical Function. */
 };
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this enumeration may change without prior notice.
+ *
+ * Ethernet device error handling mode.
+ */
+enum rte_eth_err_handle_mode {
+	/** No error handling modes are supported. */
+	RTE_ETH_ERROR_HANDLE_MODE_NONE,
+	/** Passive error handling, after the PMD detect that a reset is
+	 * required, the PMD reports @see RTE_ETH_EVENT_INTR_RESET event, and
+	 * application invoke @see rte_eth_dev_reset to recover the port.
+	 */
+	RTE_ETH_ERROR_HANDLE_MODE_PASSIVE,
+};
+
 /**
  * A structure used to retrieve the contextual information of
  * an Ethernet device, such as the controlling driver of the
@@ -1689,8 +1705,12 @@ struct rte_eth_dev_info {
 	 * embedded managed interconnect/switch.
 	 */
 	struct rte_eth_switch_info switch_info;
+	/** Supported error handling mode. @see enum rte_eth_err_handle_mode */
+	uint8_t err_handle_mode;
 
-	uint64_t reserved_64s[2]; /**< Reserved for future fields */
+	uint8_t reserved_8;       /**< Reserved for future fields  */
+	uint16_t reserved_16s[3]; /**< Reserved for future fields  */
+	uint64_t reserved_64;     /**< Reserved for future fields */
 	void *reserved_ptrs[2];   /**< Reserved for future fields */
 };
 
-- 
2.17.1


  reply	other threads:[~2022-10-09  9:15 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220128124831.427-1-kalesh-anakkur.purayil@broadcom.com>
2022-09-22  7:41 ` [PATCH v9 0/5] support " Chengwen Feng
2022-09-22  7:41   ` [PATCH v9 1/5] ethdev: support get port " Chengwen Feng
2022-10-03 17:35     ` Ferruh Yigit
2022-10-05  1:56       ` fengchengwen
2022-09-22  7:41   ` [PATCH v9 2/5] ethdev: support proactive " Chengwen Feng
2022-10-03 17:35     ` Ferruh Yigit
2022-09-22  7:41   ` [PATCH v9 3/5] app/testpmd: support error handling mode event Chengwen Feng
2022-09-22  7:41   ` [PATCH v9 4/5] net/hns3: support proactive error handling mode Chengwen Feng
2022-09-22  7:41   ` [PATCH v9 5/5] net/bnxt: " Chengwen Feng
2022-10-09  7:53 ` [PATCH v10 0/5] support " Chengwen Feng
2022-10-09  7:53   ` [PATCH v10 1/5] ethdev: support get port " Chengwen Feng
2022-10-09  7:53   ` [PATCH v10 2/5] ethdev: support proactive " Chengwen Feng
2022-10-09  7:53   ` [PATCH v10 3/5] app/testpmd: support error handling mode event Chengwen Feng
2022-10-09  7:53   ` [PATCH v10 4/5] net/hns3: support proactive error handling mode Chengwen Feng
2022-10-09  7:53   ` [PATCH v10 5/5] net/bnxt: " Chengwen Feng
2022-10-09  9:10 ` [PATCH v11 0/5] support " Chengwen Feng
2022-10-09  9:10   ` Chengwen Feng [this message]
2022-10-10  8:38     ` [PATCH v11 1/5] ethdev: support get port " Andrew Rybchenko
2022-10-10  8:44     ` Andrew Rybchenko
2022-10-09  9:10   ` [PATCH v11 2/5] ethdev: support proactive " Chengwen Feng
2022-10-10  8:47     ` Andrew Rybchenko
2022-10-11 14:48       ` fengchengwen
2022-10-09  9:10   ` [PATCH v11 3/5] app/testpmd: support error handling mode event Chengwen Feng
2022-10-09  9:10   ` [PATCH v11 4/5] net/hns3: support proactive error handling mode Chengwen Feng
2022-10-09 11:05     ` Dongdong Liu
2022-10-09  9:10   ` [PATCH v11 5/5] net/bnxt: " Chengwen Feng
2022-10-12  3:45 ` [PATCH v12 0/5] support " Chengwen Feng
2022-10-12  3:45   ` [PATCH v12 1/5] ethdev: add error handling mode to device info Chengwen Feng
2022-10-12  3:45   ` [PATCH v12 2/5] ethdev: support proactive error handling mode Chengwen Feng
2022-10-13  8:58     ` Andrew Rybchenko
2022-10-13 12:50       ` fengchengwen
2022-10-12  3:45   ` [PATCH v12 3/5] app/testpmd: support error handling mode event Chengwen Feng
2022-10-12  3:45   ` [PATCH v12 4/5] net/hns3: support proactive error handling mode Chengwen Feng
2022-10-12  3:45   ` [PATCH v12 5/5] net/bnxt: " Chengwen Feng
2022-10-13 12:42 ` [PATCH v13 0/5] support " Chengwen Feng
2022-10-13 12:42   ` [PATCH v13 1/5] ethdev: add error handling mode to device info Chengwen Feng
2022-10-13 12:42   ` [PATCH v13 2/5] ethdev: support proactive error handling mode Chengwen Feng
2022-10-13 12:42   ` [PATCH v13 3/5] app/testpmd: support error handling mode event Chengwen Feng
2022-10-13 12:42   ` [PATCH v13 4/5] net/hns3: support proactive error handling mode Chengwen Feng
2022-10-13 12:42   ` [PATCH v13 5/5] net/bnxt: " Chengwen Feng
2022-10-17  7:42   ` [PATCH v13 0/5] support " Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221009091009.38978-2-fengchengwen@huawei.com \
    --to=fengchengwen@huawei.com \
    --cc=Andrew.Rybchenko@oktetlabs.ru \
    --cc=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=ferruh.yigit@xilinx.com \
    --cc=kalesh-anakkur.purayil@broadcom.com \
    --cc=mdr@ashroe.eu \
    --cc=somnath.kotur@broadcom.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).