From: Junfeng Guo <junfeng.guo@intel.com>
To: andrew.rybchenko@oktetlabs.ru, qi.z.zhang@intel.com,
jingjing.wu@intel.com, beilei.xing@intel.com
Cc: dev@dpdk.org, Junfeng Guo <junfeng.guo@intel.com>,
Xiaoyun Li <xiaoyun.li@intel.com>
Subject: [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading
Date: Fri, 21 Oct 2022 13:18:16 +0800 [thread overview]
Message-ID: <20221021051821.2164939-10-junfeng.guo@intel.com> (raw)
In-Reply-To: <20221021051821.2164939-1-junfeng.guo@intel.com>
Add Rx/Tx offloading support, including TSO and CHKSUM.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
---
doc/guides/nics/features/idpf.ini | 3 +
drivers/net/idpf/idpf_ethdev.c | 10 ++
drivers/net/idpf/idpf_rxtx.c | 212 +++++++++++++++++++++++++++++-
drivers/net/idpf/idpf_rxtx.h | 19 +++
4 files changed, 242 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/features/idpf.ini b/doc/guides/nics/features/idpf.ini
index 79ffafc0d4..36dec39b9f 100644
--- a/doc/guides/nics/features/idpf.ini
+++ b/doc/guides/nics/features/idpf.ini
@@ -10,6 +10,9 @@
Queue start/stop = Y
Runtime Rx queue setup = Y
Runtime Tx queue setup = Y
+TSO = P
+L3 checksum offload = P
+L4 checksum offload = P
Packet type parsing = Y
Multiprocess aware = Y
FreeBSD = Y
diff --git a/drivers/net/idpf/idpf_ethdev.c b/drivers/net/idpf/idpf_ethdev.c
index c6d6c87274..ffde2ce7d1 100644
--- a/drivers/net/idpf/idpf_ethdev.c
+++ b/drivers/net/idpf/idpf_ethdev.c
@@ -86,6 +86,16 @@ idpf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
dev_info->max_mac_addrs = IDPF_NUM_MACADDR_MAX;
dev_info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
+ dev_info->rx_offload_capa =
+ RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
+ RTE_ETH_RX_OFFLOAD_UDP_CKSUM |
+ RTE_ETH_RX_OFFLOAD_TCP_CKSUM |
+ RTE_ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM;
+
+ dev_info->tx_offload_capa =
+ RTE_ETH_TX_OFFLOAD_TCP_TSO |
+ RTE_ETH_TX_OFFLOAD_MULTI_SEGS |
+ RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
dev_info->default_rxconf = (struct rte_eth_rxconf) {
.rx_free_thresh = IDPF_DEFAULT_RX_FREE_THRESH,
diff --git a/drivers/net/idpf/idpf_rxtx.c b/drivers/net/idpf/idpf_rxtx.c
index 6280b7887b..31e266bbec 100644
--- a/drivers/net/idpf/idpf_rxtx.c
+++ b/drivers/net/idpf/idpf_rxtx.c
@@ -1269,6 +1269,47 @@ idpf_stop_queues(struct rte_eth_dev *dev)
}
}
+#define IDPF_RX_FLEX_DESC_ADV_STATUS0_XSUM_S \
+ (BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_S))
+
+static inline uint64_t
+idpf_splitq_rx_csum_offload(uint8_t err)
+{
+ uint64_t flags = 0;
+
+ if (unlikely(!(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L3L4P_S))))
+ return flags;
+
+ if (likely((err & IDPF_RX_FLEX_DESC_ADV_STATUS0_XSUM_S) == 0)) {
+ flags |= (RTE_MBUF_F_RX_IP_CKSUM_GOOD |
+ RTE_MBUF_F_RX_L4_CKSUM_GOOD);
+ return flags;
+ }
+
+ if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_S)))
+ flags |= RTE_MBUF_F_RX_IP_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_IP_CKSUM_GOOD;
+
+ if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_S)))
+ flags |= RTE_MBUF_F_RX_L4_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_L4_CKSUM_GOOD;
+
+ if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_S)))
+ flags |= RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD;
+
+ if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_S)))
+ flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD;
+
+ return flags;
+}
+
static void
idpf_split_rx_bufq_refill(struct idpf_rx_queue *rx_bufq)
{
@@ -1343,9 +1384,11 @@ idpf_splitq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t pktlen_gen_bufq_id;
struct idpf_rx_queue *rxq;
const uint32_t *ptype_tbl;
+ uint8_t status_err0_qw1;
struct rte_mbuf *rxm;
uint16_t rx_id_bufq1;
uint16_t rx_id_bufq2;
+ uint64_t pkt_flags;
uint16_t pkt_len;
uint16_t bufq_id;
uint16_t gen_id;
@@ -1420,6 +1463,11 @@ idpf_splitq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_M) >>
VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_S];
+ status_err0_qw1 = rx_desc->status_err0_qw1;
+ pkt_flags = idpf_splitq_rx_csum_offload(status_err0_qw1);
+
+ rxm->ol_flags |= pkt_flags;
+
rx_pkts[nb_rx++] = rxm;
}
@@ -1496,6 +1544,49 @@ idpf_split_tx_free(struct idpf_tx_queue *cq)
cq->tx_tail = next;
}
+/* Check if the context descriptor is needed for TX offloading */
+static inline uint16_t
+idpf_calc_context_desc(uint64_t flags)
+{
+ if (flags & RTE_MBUF_F_TX_TCP_SEG)
+ return 1;
+
+ return 0;
+}
+
+/* set TSO context descriptor
+ */
+static inline void
+idpf_set_splitq_tso_ctx(struct rte_mbuf *mbuf,
+ union idpf_tx_offload tx_offload,
+ volatile union idpf_flex_tx_ctx_desc *ctx_desc)
+{
+ uint16_t cmd_dtype;
+ uint32_t tso_len;
+ uint8_t hdr_len;
+
+ if (!tx_offload.l4_len) {
+ PMD_TX_LOG(DEBUG, "L4 length set to 0");
+ return;
+ }
+
+ hdr_len = tx_offload.l2_len +
+ tx_offload.l3_len +
+ tx_offload.l4_len;
+ cmd_dtype = IDPF_TX_DESC_DTYPE_FLEX_TSO_CTX |
+ IDPF_TX_FLEX_CTX_DESC_CMD_TSO;
+ tso_len = mbuf->pkt_len - hdr_len;
+
+ ctx_desc->tso.qw1.cmd_dtype = rte_cpu_to_le_16(cmd_dtype);
+ ctx_desc->tso.qw0.hdr_len = hdr_len;
+ ctx_desc->tso.qw0.mss_rt =
+ rte_cpu_to_le_16((uint16_t)mbuf->tso_segsz &
+ IDPF_TXD_FLEX_CTX_MSS_RT_M);
+ ctx_desc->tso.qw0.flex_tlen =
+ rte_cpu_to_le_32(tso_len &
+ IDPF_TXD_FLEX_CTX_MSS_RT_M);
+}
+
uint16_t
idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts)
@@ -1504,11 +1595,14 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
volatile struct idpf_flex_tx_sched_desc *txr;
volatile struct idpf_flex_tx_sched_desc *txd;
struct idpf_tx_entry *sw_ring;
+ union idpf_tx_offload tx_offload = {0};
struct idpf_tx_entry *txe, *txn;
uint16_t nb_used, tx_id, sw_id;
struct rte_mbuf *tx_pkt;
uint16_t nb_to_clean;
uint16_t nb_tx = 0;
+ uint64_t ol_flags;
+ uint16_t nb_ctx;
if (unlikely(!txq) || unlikely(!txq->q_started))
return nb_tx;
@@ -1538,8 +1632,29 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
if (txq->nb_free < tx_pkt->nb_segs)
break;
- nb_used = tx_pkt->nb_segs;
+ ol_flags = tx_pkt->ol_flags;
+ tx_offload.l2_len = tx_pkt->l2_len;
+ tx_offload.l3_len = tx_pkt->l3_len;
+ tx_offload.l4_len = tx_pkt->l4_len;
+ tx_offload.tso_segsz = tx_pkt->tso_segsz;
+ /* Calculate the number of context descriptors needed. */
+ nb_ctx = idpf_calc_context_desc(ol_flags);
+ nb_used = tx_pkt->nb_segs + nb_ctx;
+
+ /* context descriptor */
+ if (nb_ctx) {
+ volatile union idpf_flex_tx_ctx_desc *ctx_desc =
+ (volatile union idpf_flex_tx_ctx_desc *)&txr[tx_id];
+
+ if (ol_flags & RTE_MBUF_F_TX_TCP_SEG)
+ idpf_set_splitq_tso_ctx(tx_pkt, tx_offload,
+ ctx_desc);
+
+ tx_id++;
+ if (tx_id == txq->nb_tx_desc)
+ tx_id = 0;
+ }
do {
txd = &txr[tx_id];
@@ -1566,6 +1681,8 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
if (unlikely(!(tx_id % 32)))
txd->qw1.cmd_dtype |= IDPF_TXD_FLEX_FLOW_CMD_RE;
+ if (ol_flags & IDPF_TX_CKSUM_OFFLOAD_MASK)
+ txd->qw1.cmd_dtype |= IDPF_TXD_FLEX_FLOW_CMD_CS_EN;
txq->nb_free = (uint16_t)(txq->nb_free - nb_used);
txq->nb_used = (uint16_t)(txq->nb_used + nb_used);
}
@@ -1580,6 +1697,48 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
return nb_tx;
}
+#define IDPF_RX_FLEX_DESC_STATUS0_XSUM_S \
+ (BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S) | \
+ BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S))
+
+/* Translate the rx descriptor status and error fields to pkt flags */
+static inline uint64_t
+idpf_rxd_to_pkt_flags(uint16_t status_error)
+{
+ uint64_t flags = 0;
+
+ if (unlikely(!(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_L3L4P_S))))
+ return flags;
+
+ if (likely((status_error & IDPF_RX_FLEX_DESC_STATUS0_XSUM_S) == 0)) {
+ flags |= (RTE_MBUF_F_RX_IP_CKSUM_GOOD |
+ RTE_MBUF_F_RX_L4_CKSUM_GOOD);
+ return flags;
+ }
+
+ if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_S)))
+ flags |= RTE_MBUF_F_RX_IP_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_IP_CKSUM_GOOD;
+
+ if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_S)))
+ flags |= RTE_MBUF_F_RX_L4_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_L4_CKSUM_GOOD;
+
+ if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S)))
+ flags |= RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD;
+
+ if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S)))
+ flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD;
+ else
+ flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD;
+
+ return flags;
+}
+
static inline void
idpf_update_rx_tail(struct idpf_rx_queue *rxq, uint16_t nb_hold,
uint16_t rx_id)
@@ -1613,6 +1772,7 @@ idpf_singleq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
struct rte_mbuf *rxm;
struct rte_mbuf *nmb;
uint16_t rx_status0;
+ uint64_t pkt_flags;
uint64_t dma_addr;
uint16_t nb_rx;
@@ -1682,10 +1842,13 @@ idpf_singleq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
rxm->data_len = rx_packet_len;
rxm->port = rxq->port_id;
rxm->ol_flags = 0;
+ pkt_flags = idpf_rxd_to_pkt_flags(rx_status0);
rxm->packet_type =
ptype_tbl[(uint8_t)(rte_cpu_to_le_16(rxd.flex_nic_wb.ptype_flex_flags0) &
VIRTCHNL2_RX_FLEX_DESC_PTYPE_M)];
+ rxm->ol_flags |= pkt_flags;
+
rx_pkts[nb_rx++] = rxm;
}
@@ -1748,14 +1911,17 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
{
volatile struct idpf_flex_tx_desc *txd;
volatile struct idpf_flex_tx_desc *txr;
+ union idpf_tx_offload tx_offload = {0};
struct idpf_tx_entry *txe, *txn;
struct idpf_tx_entry *sw_ring;
struct idpf_tx_queue *txq;
struct rte_mbuf *tx_pkt;
struct rte_mbuf *m_seg;
uint64_t buf_dma_addr;
+ uint64_t ol_flags;
uint16_t tx_last;
uint16_t nb_used;
+ uint16_t nb_ctx;
uint16_t td_cmd;
uint16_t tx_id;
uint16_t nb_tx;
@@ -1782,11 +1948,19 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
tx_pkt = *tx_pkts++;
RTE_MBUF_PREFETCH_TO_FREE(txe->mbuf);
+ ol_flags = tx_pkt->ol_flags;
+ tx_offload.l2_len = tx_pkt->l2_len;
+ tx_offload.l3_len = tx_pkt->l3_len;
+ tx_offload.l4_len = tx_pkt->l4_len;
+ tx_offload.tso_segsz = tx_pkt->tso_segsz;
+ /* Calculate the number of context descriptors needed. */
+ nb_ctx = idpf_calc_context_desc(ol_flags);
+
/* The number of descriptors that must be allocated for
* a packet equals to the number of the segments of that
* packet plus 1 context descriptor if needed.
*/
- nb_used = (uint16_t)(tx_pkt->nb_segs);
+ nb_used = (uint16_t)(tx_pkt->nb_segs + nb_ctx);
tx_last = (uint16_t)(tx_id + nb_used - 1);
/* Circular ring */
@@ -1814,6 +1988,28 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
}
}
+ if (nb_ctx) {
+ /* Setup TX context descriptor if required */
+ volatile union idpf_flex_tx_ctx_desc *ctx_txd =
+ (volatile union idpf_flex_tx_ctx_desc *)
+ &txr[tx_id];
+
+ txn = &sw_ring[txe->next_id];
+ RTE_MBUF_PREFETCH_TO_FREE(txn->mbuf);
+ if (txe->mbuf) {
+ rte_pktmbuf_free_seg(txe->mbuf);
+ txe->mbuf = NULL;
+ }
+
+ /* TSO enabled */
+ if (ol_flags & RTE_MBUF_F_TX_TCP_SEG)
+ idpf_set_splitq_tso_ctx(tx_pkt, tx_offload,
+ ctx_txd);
+
+ txe->last_id = tx_last;
+ tx_id = txe->next_id;
+ txe = txn;
+ }
m_seg = tx_pkt;
do {
@@ -1896,11 +2092,23 @@ idpf_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
return i;
}
+ if (ol_flags & IDPF_TX_OFFLOAD_NOTSUP_MASK) {
+ rte_errno = ENOTSUP;
+ return i;
+ }
+
if (m->pkt_len < IDPF_MIN_FRAME_SIZE) {
rte_errno = EINVAL;
return i;
}
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ ret = rte_validate_tx_offload(m);
+ if (ret != 0) {
+ rte_errno = -ret;
+ return i;
+ }
+#endif
ret = rte_net_intel_cksum_prepare(m);
if (ret != 0) {
rte_errno = -ret;
diff --git a/drivers/net/idpf/idpf_rxtx.h b/drivers/net/idpf/idpf_rxtx.h
index bd3ebe2f50..a2394ffa2c 100644
--- a/drivers/net/idpf/idpf_rxtx.h
+++ b/drivers/net/idpf/idpf_rxtx.h
@@ -44,6 +44,25 @@
#define IDPF_MAX_TSO_FRAME_SIZE 262143
#define IDPF_TX_MAX_MTU_SEG 10
+#define IDPF_TX_CKSUM_OFFLOAD_MASK ( \
+ RTE_MBUF_F_TX_IP_CKSUM | \
+ RTE_MBUF_F_TX_L4_MASK | \
+ RTE_MBUF_F_TX_TCP_SEG)
+
+#define IDPF_TX_OFFLOAD_MASK ( \
+ RTE_MBUF_F_TX_OUTER_IPV6 | \
+ RTE_MBUF_F_TX_OUTER_IPV4 | \
+ RTE_MBUF_F_TX_IPV6 | \
+ RTE_MBUF_F_TX_IPV4 | \
+ RTE_MBUF_F_TX_VLAN | \
+ RTE_MBUF_F_TX_IP_CKSUM | \
+ RTE_MBUF_F_TX_L4_MASK | \
+ RTE_MBUF_F_TX_TCP_SEG | \
+ RTE_ETH_TX_OFFLOAD_SECURITY)
+
+#define IDPF_TX_OFFLOAD_NOTSUP_MASK \
+ (RTE_MBUF_F_TX_OFFLOAD_MASK ^ IDPF_TX_OFFLOAD_MASK)
+
#define IDPF_GET_PTYPE_SIZE(p) \
(sizeof(struct virtchnl2_ptype) + \
(((p)->proto_id_count ? ((p)->proto_id_count - 1) : 0) * sizeof((p)->proto_id[0])))
--
2.34.1
next prev parent reply other threads:[~2022-10-21 5:21 UTC|newest]
Thread overview: 376+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 11:30 [PATCH 00/13] add support for idpf PMD in DPDK Junfeng Guo
2022-08-03 11:30 ` [PATCH 01/13] net/idpf/base: introduce base code Junfeng Guo
2022-08-03 11:30 ` [PATCH 02/13] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-08-03 11:30 ` [PATCH 03/13] net/idpf: support device initialization Junfeng Guo
2022-08-03 15:11 ` Stephen Hemminger
2022-08-08 4:43 ` Guo, Junfeng
2022-10-31 18:00 ` Ali Alnubani
2022-11-01 6:55 ` Xing, Beilei
2022-11-02 15:31 ` Raslan Darawsheh
2022-11-02 15:52 ` Thomas Monjalon
2022-11-03 0:56 ` Xing, Beilei
2022-08-03 11:30 ` [PATCH 04/13] net/idpf: add queue operations Junfeng Guo
2022-08-03 15:16 ` Stephen Hemminger
2022-08-08 4:44 ` Guo, Junfeng
2022-08-03 11:30 ` [PATCH 05/13] net/idpf: add support to get device information Junfeng Guo
2022-08-03 11:30 ` [PATCH 06/13] net/idpf: add support to get packet type Junfeng Guo
2022-08-03 11:30 ` [PATCH 07/13] net/idpf: add support to update link status Junfeng Guo
2022-08-03 11:30 ` [PATCH 08/13] net/idpf: add basic Rx/Tx datapath Junfeng Guo
2022-08-03 11:31 ` [PATCH 09/13] net/idpf: add support for RSS Junfeng Guo
2022-08-03 11:31 ` [PATCH 10/13] net/idpf: add mtu configuration Junfeng Guo
2022-08-03 11:31 ` [PATCH 11/13] net/idpf: add hw statistics Junfeng Guo
2022-08-03 11:31 ` [PATCH 12/13] net/idpf: support write back based on ITR expire Junfeng Guo
2022-08-03 11:31 ` [PATCH 13/13] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 01/14] net/idpf/base: introduce base code Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 02/14] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-12 8:07 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 03/14] net/idpf: add support for device initialization Junfeng Guo
2022-09-21 5:41 ` Xing, Beilei
2022-09-21 6:04 ` Xing, Beilei
2022-10-03 13:44 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-10 7:48 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 04/14] net/idpf: add support for queue operations Junfeng Guo
2022-10-03 13:47 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 05/14] net/idpf: add support for device information get Junfeng Guo
2022-10-03 13:53 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 06/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-03 13:58 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 07/14] net/idpf: add support for link status update Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-03 14:02 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 09/14] net/idpf: add support for RSS Junfeng Guo
2022-10-03 14:10 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 10/14] net/idpf: add support for mtu configuration Junfeng Guo
2022-10-03 14:12 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 11/14] net/idpf: add support for hw statistics Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-03 14:20 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 8:06 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-03 14:22 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 7:56 ` Wu, Wenjun1
2022-10-03 13:31 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-03 14:36 ` Andrew Rybchenko
2022-10-18 11:09 ` Guo, Junfeng
2022-10-18 11:12 ` [PATCH v3 00/15] " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 01/15] common/idpf: introduce common library Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 6:40 ` Andrew Rybchenko
2022-10-21 12:35 ` Xing, Beilei
2022-10-21 12:38 ` Andrew Rybchenko
2022-10-21 12:46 ` Zhang, Qi Z
2022-10-24 13:01 ` [PATCH v10 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 01/14] net/idpf: add support for device start and stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-28 15:35 ` Andrew Rybchenko
2022-10-28 17:22 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-28 15:45 ` Andrew Rybchenko
2022-10-27 7:47 ` [PATCH v14 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-28 15:50 ` Andrew Rybchenko
2022-10-28 17:34 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-29 3:27 ` [PATCH v15 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-29 3:27 ` [PATCH v15 01/18] common/idpf: introduce common library beilei.xing
2022-10-29 3:27 ` [PATCH v15 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-29 3:27 ` [PATCH v15 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-29 3:27 ` [PATCH v15 04/18] net/idpf: add Rx " beilei.xing
2022-10-29 3:27 ` [PATCH v15 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 06/18] net/idpf: add support for queue start beilei.xing
2022-10-29 3:27 ` [PATCH v15 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 08/18] net/idpf: add queue release beilei.xing
2022-10-29 3:27 ` [PATCH v15 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-29 3:27 ` [PATCH v15 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-29 3:27 ` [PATCH v15 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-29 3:27 ` [PATCH v15 14/18] net/idpf: add support for RSS beilei.xing
2022-10-29 3:27 ` [PATCH v15 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-29 3:27 ` [PATCH v15 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-29 14:48 ` [PATCH v15 00/18] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-31 2:26 ` Xing, Beilei
2022-10-31 3:36 ` [PATCH v16 " beilei.xing
2022-10-31 3:36 ` [PATCH v16 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 3:36 ` [PATCH v16 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 3:36 ` [PATCH v16 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 3:36 ` [PATCH v16 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 3:36 ` [PATCH v16 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 3:36 ` [PATCH v16 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 08/18] net/idpf: add queue release beilei.xing
2022-10-31 3:36 ` [PATCH v16 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 3:36 ` [PATCH v16 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 3:36 ` [PATCH v16 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 3:36 ` [PATCH v16 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 3:36 ` [PATCH v16 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 3:36 ` [PATCH v16 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 5:15 ` [PATCH v17 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 5:15 ` [PATCH v17 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 5:15 ` [PATCH v17 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 5:15 ` [PATCH v17 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 5:15 ` [PATCH v17 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 5:15 ` [PATCH v17 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 5:15 ` [PATCH v17 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 08/18] net/idpf: add queue release beilei.xing
2022-10-31 5:15 ` [PATCH v17 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 5:15 ` [PATCH v17 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 5:15 ` [PATCH v17 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 5:15 ` [PATCH v17 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 5:15 ` [PATCH v17 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 5:15 ` [PATCH v17 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 8:33 ` [PATCH v18 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 8:33 ` [PATCH v18 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 8:33 ` [PATCH v18 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 8:33 ` [PATCH v18 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 8:33 ` [PATCH v18 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 8:33 ` [PATCH v18 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 8:33 ` [PATCH v18 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 08/18] net/idpf: add queue release beilei.xing
2022-10-31 8:33 ` [PATCH v18 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 8:33 ` [PATCH v18 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 8:33 ` [PATCH v18 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 8:33 ` [PATCH v18 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 8:33 ` [PATCH v18 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 8:33 ` [PATCH v18 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 13:38 ` [PATCH v18 00/18] add support for idpf PMD in DPDK Thomas Monjalon
2022-10-27 5:44 ` [PATCH v13 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 08/18] net/idpf: add queue release Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 12/18] net/idpf: support packet type get Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-25 8:57 ` Andrew Rybchenko
2022-10-26 8:28 ` Xing, Beilei
2022-10-28 15:14 ` Andrew Rybchenko
2022-10-28 17:19 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-25 9:40 ` Andrew Rybchenko
2022-10-26 8:34 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-25 9:49 ` Andrew Rybchenko
2022-10-26 8:38 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 08/18] net/idpf: add queue release Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 09/18] net/idpf: add support for packet type get Junfeng Guo
2022-10-25 9:57 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 10/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 11/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 12/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-25 10:12 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-25 10:03 ` Andrew Rybchenko
2022-10-28 1:48 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-25 10:14 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 02/14] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 03/14] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 04/14] net/idpf: add queue release Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 05/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 06/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 07/14] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 08/14] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 09/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 11/14] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 12/14] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-21 7:39 ` Andrew Rybchenko
2022-10-21 7:48 ` Andrew Rybchenko
2022-10-21 12:41 ` Zhang, Qi Z
2022-10-25 7:52 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-21 7:44 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-21 7:53 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-21 7:56 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-21 8:00 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-21 5:18 ` Junfeng Guo [this message]
2022-10-21 8:29 ` [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading Andrew Rybchenko
2022-10-24 13:26 ` Xing, Beilei
2022-10-21 5:18 ` [PATCH v9 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-21 8:38 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 02/15] net/idpf: add support for device initialization Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 03/15] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 04/15] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 05/15] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 06/15] net/idpf: add support for device information get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 07/15] net/idpf: add support for packet type get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 08/15] net/idpf: add support for link status update Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 09/15] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 10/15] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 11/15] net/idpf: add support for RSS Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 12/15] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 13/15] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 14/15] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 15/15] net/idpf: add support for timestamp offload Junfeng Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021051821.2164939-10-junfeng.guo@intel.com \
--to=junfeng.guo@intel.com \
--cc=andrew.rybchenko@oktetlabs.ru \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).