From: Junfeng Guo <junfeng.guo@intel.com>
To: qi.z.zhang@intel.com, jingjing.wu@intel.com,
ferruh.yigit@amd.com, beilei.xing@intel.com
Cc: dev@dpdk.org, xiaoyun.li@intel.com, helin.zhang@intel.com,
Junfeng Guo <junfeng.guo@intel.com>,
Rushil Gupta <rushilg@google.com>,
Jordan Kimbrough <jrkim@google.com>,
Jeroen de Borst <jeroendb@google.com>
Subject: [RFC v3 02/10] net/gve: add Rx queue setup for DQO
Date: Fri, 17 Feb 2023 15:32:20 +0800 [thread overview]
Message-ID: <20230217073228.340815-3-junfeng.guo@intel.com> (raw)
In-Reply-To: <20230217073228.340815-1-junfeng.guo@intel.com>
Add support for rx_queue_setup_dqo ops.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Rushil Gupta <rushilg@google.com>
Signed-off-by: Jordan Kimbrough <jrkim@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
---
drivers/net/gve/gve_ethdev.c | 1 +
drivers/net/gve/gve_ethdev.h | 14 ++++
drivers/net/gve/gve_rx_dqo.c | 154 +++++++++++++++++++++++++++++++++++
drivers/net/gve/meson.build | 1 +
4 files changed, 170 insertions(+)
create mode 100644 drivers/net/gve/gve_rx_dqo.c
diff --git a/drivers/net/gve/gve_ethdev.c b/drivers/net/gve/gve_ethdev.c
index a02a48ef11..0f55d028f5 100644
--- a/drivers/net/gve/gve_ethdev.c
+++ b/drivers/net/gve/gve_ethdev.c
@@ -427,6 +427,7 @@ static const struct eth_dev_ops gve_eth_dev_ops_dqo = {
.dev_stop = gve_dev_stop,
.dev_close = gve_dev_close,
.dev_infos_get = gve_dev_info_get,
+ .rx_queue_setup = gve_rx_queue_setup_dqo,
.tx_queue_setup = gve_tx_queue_setup_dqo,
.link_update = gve_link_update,
.mtu_set = gve_dev_mtu_set,
diff --git a/drivers/net/gve/gve_ethdev.h b/drivers/net/gve/gve_ethdev.h
index c4b66acb0a..c4e5b8cb43 100644
--- a/drivers/net/gve/gve_ethdev.h
+++ b/drivers/net/gve/gve_ethdev.h
@@ -150,6 +150,7 @@ struct gve_rx_queue {
uint16_t nb_rx_desc;
uint16_t expected_seqno; /* the next expected seqno */
uint16_t free_thresh;
+ uint16_t nb_rx_hold;
uint32_t next_avail;
uint32_t nb_avail;
@@ -174,6 +175,14 @@ struct gve_rx_queue {
uint16_t ntfy_id;
uint16_t rx_buf_len;
+ /* newly added for DQO */
+ volatile struct gve_rx_desc_dqo *rx_ring;
+ struct gve_rx_compl_desc_dqo *compl_ring;
+ const struct rte_memzone *compl_ring_mz;
+ uint64_t compl_ring_phys_addr;
+ uint8_t cur_gen_bit;
+ uint16_t bufq_tail;
+
/* Only valid for DQO_RDA queue format */
struct gve_rx_queue *bufq;
@@ -345,6 +354,11 @@ gve_tx_burst(void *txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
/* Below functions are used for DQO */
+int
+gve_rx_queue_setup_dqo(struct rte_eth_dev *dev, uint16_t queue_id,
+ uint16_t nb_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *conf,
+ struct rte_mempool *pool);
int
gve_tx_queue_setup_dqo(struct rte_eth_dev *dev, uint16_t queue_id,
uint16_t nb_desc, unsigned int socket_id,
diff --git a/drivers/net/gve/gve_rx_dqo.c b/drivers/net/gve/gve_rx_dqo.c
new file mode 100644
index 0000000000..9c412c1481
--- /dev/null
+++ b/drivers/net/gve/gve_rx_dqo.c
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2022-2023 Intel Corporation
+ */
+
+#include "gve_ethdev.h"
+#include "base/gve_adminq.h"
+
+static void
+gve_reset_rxq_dqo(struct gve_rx_queue *rxq)
+{
+ struct rte_mbuf **sw_ring;
+ uint32_t size, i;
+
+ if (rxq == NULL) {
+ PMD_DRV_LOG(ERR, "pointer to rxq is NULL");
+ return;
+ }
+
+ size = rxq->nb_rx_desc * sizeof(struct gve_rx_desc_dqo);
+ for (i = 0; i < size; i++)
+ ((volatile char *)rxq->rx_ring)[i] = 0;
+
+ size = rxq->nb_rx_desc * sizeof(struct gve_rx_compl_desc_dqo);
+ for (i = 0; i < size; i++)
+ ((volatile char *)rxq->compl_ring)[i] = 0;
+
+ sw_ring = rxq->sw_ring;
+ for (i = 0; i < rxq->nb_rx_desc; i++)
+ sw_ring[i] = NULL;
+
+ rxq->bufq_tail = 0;
+ rxq->next_avail = 0;
+ rxq->nb_rx_hold = rxq->nb_rx_desc - 1;
+
+ rxq->rx_tail = 0;
+ rxq->cur_gen_bit = 1;
+}
+
+int
+gve_rx_queue_setup_dqo(struct rte_eth_dev *dev, uint16_t queue_id,
+ uint16_t nb_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *conf,
+ struct rte_mempool *pool)
+{
+ struct gve_priv *hw = dev->data->dev_private;
+ const struct rte_memzone *mz;
+ struct gve_rx_queue *rxq;
+ uint16_t free_thresh;
+ int err = 0;
+
+ if (nb_desc != hw->rx_desc_cnt) {
+ PMD_DRV_LOG(WARNING, "gve doesn't support nb_desc config, use hw nb_desc %u.",
+ hw->rx_desc_cnt);
+ }
+ nb_desc = hw->rx_desc_cnt;
+
+ /* Allocate the RX queue data structure. */
+ rxq = rte_zmalloc_socket("gve rxq",
+ sizeof(struct gve_rx_queue),
+ RTE_CACHE_LINE_SIZE,
+ socket_id);
+ if (rxq == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to allocate memory for rx queue structure");
+ return -ENOMEM;
+ }
+
+ /* check free_thresh here */
+ free_thresh = conf->rx_free_thresh ?
+ conf->rx_free_thresh : GVE_DEFAULT_RX_FREE_THRESH;
+ if (free_thresh >= nb_desc) {
+ PMD_DRV_LOG(ERR, "rx_free_thresh (%u) must be less than nb_desc (%u).",
+ free_thresh, rxq->nb_rx_desc);
+ err = -EINVAL;
+ goto free_rxq;
+ }
+
+ rxq->nb_rx_desc = nb_desc;
+ rxq->free_thresh = free_thresh;
+ rxq->queue_id = queue_id;
+ rxq->port_id = dev->data->port_id;
+ rxq->ntfy_id = hw->num_ntfy_blks / 2 + queue_id;
+
+ rxq->mpool = pool;
+ rxq->hw = hw;
+ rxq->ntfy_addr = &hw->db_bar2[rte_be_to_cpu_32(hw->irq_dbs[rxq->ntfy_id].id)];
+
+ rxq->rx_buf_len =
+ rte_pktmbuf_data_room_size(rxq->mpool) - RTE_PKTMBUF_HEADROOM;
+
+ /* Allocate software ring */
+ rxq->sw_ring = rte_zmalloc_socket("gve rx sw ring",
+ nb_desc * sizeof(struct rte_mbuf *),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (rxq->sw_ring == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to allocate memory for SW RX ring");
+ err = -ENOMEM;
+ goto free_rxq;
+ }
+
+ /* Allocate RX buffer queue */
+ mz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_id,
+ nb_desc * sizeof(struct gve_rx_desc_dqo),
+ PAGE_SIZE, socket_id);
+ if (mz == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX buffer queue");
+ err = -ENOMEM;
+ goto free_rxq_sw_ring;
+ }
+ rxq->rx_ring = (struct gve_rx_desc_dqo *)mz->addr;
+ rxq->rx_ring_phys_addr = mz->iova;
+ rxq->mz = mz;
+
+ /* Allocate RX completion queue */
+ mz = rte_eth_dma_zone_reserve(dev, "compl_ring", queue_id,
+ nb_desc * sizeof(struct gve_rx_compl_desc_dqo),
+ PAGE_SIZE, socket_id);
+ if (mz == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX completion queue");
+ err = -ENOMEM;
+ goto free_rxq_mz;
+ }
+ /* Zero all the descriptors in the ring */
+ memset(mz->addr, 0, nb_desc * sizeof(struct gve_rx_compl_desc_dqo));
+ rxq->compl_ring = (struct gve_rx_compl_desc_dqo *)mz->addr;
+ rxq->compl_ring_phys_addr = mz->iova;
+ rxq->compl_ring_mz = mz;
+
+ mz = rte_eth_dma_zone_reserve(dev, "rxq_res", queue_id,
+ sizeof(struct gve_queue_resources),
+ PAGE_SIZE, socket_id);
+ if (mz == NULL) {
+ PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX resource");
+ err = -ENOMEM;
+ goto free_rxq_cq_mz;
+ }
+ rxq->qres = (struct gve_queue_resources *)mz->addr;
+ rxq->qres_mz = mz;
+
+ gve_reset_rxq_dqo(rxq);
+
+ dev->data->rx_queues[queue_id] = rxq;
+
+ return 0;
+
+free_rxq_cq_mz:
+ rte_memzone_free(rxq->compl_ring_mz);
+free_rxq_mz:
+ rte_memzone_free(rxq->mz);
+free_rxq_sw_ring:
+ rte_free(rxq->sw_ring);
+free_rxq:
+ rte_free(rxq);
+ return err;
+}
diff --git a/drivers/net/gve/meson.build b/drivers/net/gve/meson.build
index a699432160..8caee3714b 100644
--- a/drivers/net/gve/meson.build
+++ b/drivers/net/gve/meson.build
@@ -11,6 +11,7 @@ sources = files(
'base/gve_adminq.c',
'gve_rx.c',
'gve_tx.c',
+ 'gve_rx_dqo.c',
'gve_tx_dqo.c',
'gve_ethdev.c',
)
--
2.34.1
next prev parent reply other threads:[~2023-02-17 7:39 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-18 2:53 [RFC 0/8] gve PMD enhancement Junfeng Guo
2023-01-18 2:53 ` [RFC 1/8] net/gve: add Rx queue setup for DQO Junfeng Guo
2023-01-18 2:53 ` [RFC 2/8] net/gve: support device start and close " Junfeng Guo
2023-01-18 2:53 ` [RFC 3/8] net/gve: support queue release and stop " Junfeng Guo
2023-01-18 2:53 ` [RFC 4/8] net/gve: support basic Tx data path " Junfeng Guo
2023-01-18 2:53 ` [RFC 5/8] net/gve: support basic Rx " Junfeng Guo
2023-01-18 2:53 ` [RFC 6/8] net/gve: support basic stats " Junfeng Guo
2023-01-18 2:53 ` [RFC 7/8] net/gve: support jumbo frame for GQI Junfeng Guo
2023-01-18 2:53 ` [RFC 8/8] net/gve: add AdminQ command to verify driver compatibility Junfeng Guo
2023-01-25 13:37 ` [RFC 0/8] gve PMD enhancement Li, Xiaoyun
2023-01-30 6:26 ` [RFC v2 0/9] " Junfeng Guo
2023-01-30 6:26 ` [RFC v2 1/9] net/gve: add Tx queue setup for DQO Junfeng Guo
2023-01-30 6:26 ` [RFC v2 2/9] net/gve: add Rx " Junfeng Guo
2023-01-30 6:26 ` [RFC v2 3/9] net/gve: support device start and close " Junfeng Guo
2023-01-30 6:26 ` [RFC v2 4/9] net/gve: support queue release and stop " Junfeng Guo
2023-01-30 6:26 ` [RFC v2 5/9] net/gve: support basic Tx data path " Junfeng Guo
2023-01-30 6:26 ` [RFC v2 6/9] net/gve: support basic Rx " Junfeng Guo
2023-01-30 18:32 ` Honnappa Nagarahalli
2023-01-30 6:26 ` [RFC v2 7/9] net/gve: support basic stats " Junfeng Guo
2023-01-30 18:27 ` Honnappa Nagarahalli
2023-01-30 6:26 ` [RFC v2 8/9] net/gve: support jumbo frame for GQI Junfeng Guo
2023-01-30 6:26 ` [RFC v2 9/9] net/gve: add AdminQ command to verify driver compatibility Junfeng Guo
2023-02-17 7:32 ` [RFC v3 00/10] gve PMD enhancement Junfeng Guo
2023-02-17 7:32 ` [RFC v3 01/10] net/gve: add Tx queue setup for DQO Junfeng Guo
2023-02-17 7:32 ` Junfeng Guo [this message]
2023-02-17 7:32 ` [RFC v3 03/10] net/gve: support device start and close " Junfeng Guo
2023-02-17 7:32 ` [RFC v3 04/10] net/gve: support queue release and stop " Junfeng Guo
2023-02-17 7:32 ` [RFC v3 05/10] net/gve: support basic Tx data path " Junfeng Guo
2023-02-17 7:32 ` [RFC v3 06/10] net/gve: support basic Rx " Junfeng Guo
2023-02-17 15:17 ` Honnappa Nagarahalli
2023-02-23 5:32 ` Guo, Junfeng
2023-02-17 7:32 ` [RFC v3 07/10] net/gve: support basic stats " Junfeng Guo
2023-02-17 15:28 ` Honnappa Nagarahalli
2023-02-17 7:32 ` [RFC v3 08/10] net/gve: enable Tx checksum offload " Junfeng Guo
2023-02-17 7:32 ` [RFC v3 09/10] net/gve: support jumbo frame for GQI Junfeng Guo
2023-02-17 7:32 ` [RFC v3 10/10] net/gve: add AdminQ command to verify driver compatibility Junfeng Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230217073228.340815-3-junfeng.guo@intel.com \
--to=junfeng.guo@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=helin.zhang@intel.com \
--cc=jeroendb@google.com \
--cc=jingjing.wu@intel.com \
--cc=jrkim@google.com \
--cc=qi.z.zhang@intel.com \
--cc=rushilg@google.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).