From: Srikanth Yalavarthi <syalavarthi@marvell.com>
To: Srikanth Yalavarthi <syalavarthi@marvell.com>
Cc: <dev@dpdk.org>, <sshankarnara@marvell.com>, <jerinj@marvell.com>,
<aprabhu@marvell.com>, <ptakkar@marvell.com>,
<pshukla@marvell.com>
Subject: [PATCH v6 19/39] ml/cnxk: enable support to stop an ML models
Date: Fri, 10 Mar 2023 00:19:55 -0800 [thread overview]
Message-ID: <20230310082015.20200-20-syalavarthi@marvell.com> (raw)
In-Reply-To: <20230310082015.20200-1-syalavarthi@marvell.com>
Implemented model stop driver function. A model stop job is
enqueued through scratch registers and is checked for
completion through polling in a synchronous mode. OCM pages
are released after model stop completion.
Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
---
drivers/ml/cnxk/cn10k_ml_ops.c | 115 ++++++++++++++++++++++++++++++++-
drivers/ml/cnxk/cn10k_ml_ops.h | 1 +
2 files changed, 114 insertions(+), 2 deletions(-)
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.c b/drivers/ml/cnxk/cn10k_ml_ops.c
index e8ce65b182..77d3728d8d 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.c
+++ b/drivers/ml/cnxk/cn10k_ml_ops.c
@@ -295,10 +295,14 @@ cn10k_ml_dev_configure(struct rte_ml_dev *dev, const struct rte_ml_dev_config *c
/* Re-configure */
void **models;
- /* Unload all models */
+ /* Stop and unload all models */
for (model_id = 0; model_id < dev->data->nb_models; model_id++) {
model = dev->data->models[model_id];
if (model != NULL) {
+ if (model->state == ML_CN10K_MODEL_STATE_STARTED) {
+ if (cn10k_ml_model_stop(dev, model_id) != 0)
+ plt_err("Could not stop model %u", model_id);
+ }
if (model->state == ML_CN10K_MODEL_STATE_LOADED) {
if (cn10k_ml_model_unload(dev, model_id) != 0)
plt_err("Could not unload model %u", model_id);
@@ -362,10 +366,14 @@ cn10k_ml_dev_close(struct rte_ml_dev *dev)
mldev = dev->data->dev_private;
- /* Unload all models */
+ /* Stop and unload all models */
for (model_id = 0; model_id < dev->data->nb_models; model_id++) {
model = dev->data->models[model_id];
if (model != NULL) {
+ if (model->state == ML_CN10K_MODEL_STATE_STARTED) {
+ if (cn10k_ml_model_stop(dev, model_id) != 0)
+ plt_err("Could not stop model %u", model_id);
+ }
if (model->state == ML_CN10K_MODEL_STATE_LOADED) {
if (cn10k_ml_model_unload(dev, model_id) != 0)
plt_err("Could not unload model %u", model_id);
@@ -767,6 +775,108 @@ cn10k_ml_model_start(struct rte_ml_dev *dev, uint16_t model_id)
return ret;
}
+int
+cn10k_ml_model_stop(struct rte_ml_dev *dev, uint16_t model_id)
+{
+ struct cn10k_ml_model *model;
+ struct cn10k_ml_dev *mldev;
+ struct cn10k_ml_ocm *ocm;
+ struct cn10k_ml_req *req;
+
+ bool job_enqueued;
+ bool job_dequeued;
+ bool locked;
+ int ret = 0;
+
+ mldev = dev->data->dev_private;
+ ocm = &mldev->ocm;
+ model = dev->data->models[model_id];
+
+ if (model == NULL) {
+ plt_err("Invalid model_id = %u", model_id);
+ return -EINVAL;
+ }
+
+ /* Prepare JD */
+ req = model->req;
+ cn10k_ml_prep_sp_job_descriptor(mldev, model, req, ML_CN10K_JOB_TYPE_MODEL_STOP);
+ req->result.error_code = 0x0;
+ req->result.user_ptr = NULL;
+
+ plt_write64(ML_CN10K_POLL_JOB_START, &req->status);
+ plt_wmb();
+
+ locked = false;
+ while (!locked) {
+ if (plt_spinlock_trylock(&model->lock) != 0) {
+ if (model->state == ML_CN10K_MODEL_STATE_LOADED) {
+ plt_ml_dbg("Model not started, model = 0x%016lx",
+ PLT_U64_CAST(model));
+ plt_spinlock_unlock(&model->lock);
+ return 1;
+ }
+
+ if (model->state == ML_CN10K_MODEL_STATE_JOB_ACTIVE) {
+ plt_err("A slow-path job is active for the model = 0x%016lx",
+ PLT_U64_CAST(model));
+ plt_spinlock_unlock(&model->lock);
+ return -EBUSY;
+ }
+
+ model->state = ML_CN10K_MODEL_STATE_JOB_ACTIVE;
+ plt_spinlock_unlock(&model->lock);
+ locked = true;
+ }
+ }
+
+ while (model->model_mem_map.ocm_reserved) {
+ if (plt_spinlock_trylock(&ocm->lock) != 0) {
+ cn10k_ml_ocm_free_pages(dev, model->model_id);
+ model->model_mem_map.ocm_reserved = false;
+ model->model_mem_map.tilemask = 0x0;
+ plt_spinlock_unlock(&ocm->lock);
+ }
+ }
+
+ job_enqueued = false;
+ job_dequeued = false;
+ do {
+ if (!job_enqueued) {
+ req->timeout = plt_tsc_cycles() + ML_CN10K_CMD_TIMEOUT * plt_tsc_hz();
+ job_enqueued = roc_ml_scratch_enqueue(&mldev->roc, &req->jd);
+ }
+
+ if (job_enqueued && !job_dequeued)
+ job_dequeued = roc_ml_scratch_dequeue(&mldev->roc, &req->jd);
+
+ if (job_dequeued)
+ break;
+ } while (plt_tsc_cycles() < req->timeout);
+
+ if (job_dequeued) {
+ if (plt_read64(&req->status) == ML_CN10K_POLL_JOB_FINISH) {
+ if (req->result.error_code == 0x0)
+ ret = 0;
+ else
+ ret = -1;
+ }
+ } else {
+ roc_ml_scratch_queue_reset(&mldev->roc);
+ ret = -ETIME;
+ }
+
+ locked = false;
+ while (!locked) {
+ if (plt_spinlock_trylock(&model->lock) != 0) {
+ model->state = ML_CN10K_MODEL_STATE_LOADED;
+ plt_spinlock_unlock(&model->lock);
+ locked = true;
+ }
+ }
+
+ return ret;
+}
+
struct rte_ml_dev_ops cn10k_ml_ops = {
/* Device control ops */
.dev_info_get = cn10k_ml_dev_info_get,
@@ -783,4 +893,5 @@ struct rte_ml_dev_ops cn10k_ml_ops = {
.model_load = cn10k_ml_model_load,
.model_unload = cn10k_ml_model_unload,
.model_start = cn10k_ml_model_start,
+ .model_stop = cn10k_ml_model_stop,
};
diff --git a/drivers/ml/cnxk/cn10k_ml_ops.h b/drivers/ml/cnxk/cn10k_ml_ops.h
index 989af978c4..22576b93c0 100644
--- a/drivers/ml/cnxk/cn10k_ml_ops.h
+++ b/drivers/ml/cnxk/cn10k_ml_ops.h
@@ -65,5 +65,6 @@ int cn10k_ml_model_load(struct rte_ml_dev *dev, struct rte_ml_model_params *para
uint16_t *model_id);
int cn10k_ml_model_unload(struct rte_ml_dev *dev, uint16_t model_id);
int cn10k_ml_model_start(struct rte_ml_dev *dev, uint16_t model_id);
+int cn10k_ml_model_stop(struct rte_ml_dev *dev, uint16_t model_id);
#endif /* _CN10K_ML_OPS_H_ */
--
2.17.1
next prev parent reply other threads:[~2023-03-10 8:22 UTC|newest]
Thread overview: 253+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 20:01 [PATCH v1 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:01 ` [PATCH v1 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 28/37] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:02 ` [PATCH v1 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 00/37] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 01/37] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 02/37] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 03/37] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 04/37] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 05/37] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 06/37] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 07/37] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 08/37] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 09/37] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 10/37] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 11/37] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 12/37] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 13/37] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 14/37] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 15/37] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 16/37] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 17/37] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 18/37] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 19/37] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 20/37] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 21/37] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 22/37] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 23/37] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 24/37] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 25/37] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 26/37] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 27/37] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 28/37] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 29/37] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 30/37] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-08 20:17 ` [PATCH v2 31/37] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 32/37] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 33/37] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 34/37] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 35/37] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 36/37] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-08 20:18 ` [PATCH v2 37/37] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 00/38] Implementation of ML CNXK driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 01/38] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 02/38] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 03/38] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 04/38] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 05/38] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 06/38] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 07/38] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 08/38] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 09/38] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 10/38] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 11/38] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 12/38] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 13/38] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 14/38] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 15/38] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 16/38] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 17/38] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 18/38] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 19/38] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 20/38] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 21/38] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 22/38] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 23/38] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 24/38] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 25/38] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 26/38] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 27/38] ml/cnxk: dequeue " Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 28/38] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 29/38] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 30/38] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 31/38] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 32/38] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 33/38] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 34/38] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 35/38] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 36/38] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 37/38] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2022-12-20 19:26 ` [PATCH v3 38/38] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2022-12-20 21:23 ` [PATCH v3 00/38] Implementation of ML CNXK driver Stephen Hemminger
2022-12-21 4:44 ` Jerin Jacob
2023-02-01 9:22 ` [PATCH v4 00/39] " Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-01 9:22 ` [PATCH v4 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-01 9:23 ` [PATCH v4 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 00/39] Implementation of ML CNXK driver Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-09 22:06 ` Thomas Monjalon
2023-03-10 8:25 ` [EXT] " Srikanth Yalavarthi
2023-03-10 9:28 ` Thomas Monjalon
2023-03-10 9:31 ` Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-02-07 16:06 ` [PATCH v5 19/39] ml/cnxk: enable support to stop an ML models Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-02-27 10:42 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-02-15 12:33 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:40 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-01 9:01 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-02-07 16:07 ` [PATCH v5 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-02-15 12:34 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:41 ` Prince Takkar
2023-02-07 16:07 ` [PATCH v5 39/39] ml/cnxk: enable support for configurable ocm page Srikanth Yalavarthi
2023-02-15 12:33 ` Shivah Shankar Shankar Narayan Rao
2023-02-16 4:37 ` Prince Takkar
2023-03-02 6:08 ` [PATCH v5 00/39] Implementation of ML CNXK driver Prince Takkar
2023-03-10 8:19 ` [PATCH v6 " Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 01/39] common/cnxk: add ML headers and ROC code for cnxk Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 02/39] ml/cnxk: add skeleton for ML cnxk driver Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 03/39] ml/cnxk: enable probe and remove of ML device Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 04/39] ml/cnxk: add driver support to get device info Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 05/39] ml/cnxk: add support for configure and close Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 06/39] ml/cnxk: parse ML firmware path from device args Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 07/39] ml/cnxk: enable firmware load and device reset Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 08/39] ml/cnxk: enable support for simulator environment Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 09/39] ml/cnxk: enable support for device start and stop Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 10/39] ml/cnxk: add support to create device queue-pairs Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 11/39] ml/cnxk: add functions to load and unload models Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 12/39] ml/cnxk: enable validity checks for model metadata Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 13/39] ml/cnxk: add internal structures for derived info Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 14/39] ml/cnxk: add internal structures for tiles and OCM Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 15/39] ml/cnxk: add structures for slow and fast path JDs Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 16/39] ml/cnxk: find OCM mask and page slots for a model Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 17/39] ml/cnxk: add support to reserve and free OCM pages Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 18/39] ml/cnxk: enable support to start an ML model Srikanth Yalavarthi
2023-03-10 8:19 ` Srikanth Yalavarthi [this message]
2023-03-10 8:19 ` [PATCH v6 20/39] ml/cnxk: enable support to get model information Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 21/39] ml/cnxk: enable support to update model params Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 22/39] ml/cnxk: add support to get IO buffer sizes Srikanth Yalavarthi
2023-03-10 8:19 ` [PATCH v6 23/39] ml/cnxk: enable quantization and dequantization Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 24/39] ml/cnxk: enable support to dump device debug info Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 25/39] ml/cnxk: add driver support for device selftest Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 26/39] ml/cnxk: enqueue a burst of inference requests Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 27/39] ml/cnxk: dequeue " Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 28/39] ml/cnxk: add internal function for sync mode run Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 29/39] ml/cnxk: enable support for firmware error codes Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 30/39] ml/cnxk: add support to get and reset device stats Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 31/39] ml/cnxk: add support to handle extended dev stats Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 32/39] ml/cnxk: enable support to get xstats in cycles Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 33/39] ml/cnxk: add support to report DPE FW warnings Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 34/39] ml/cnxk: add support to enable model data caching Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 35/39] ml/cnxk: add support to select OCM allocation mode Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 36/39] ml/cnxk: add support to use lock during jcmd enq Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 37/39] ml/cnxk: add support to select poll memory region Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 38/39] ml/cnxk: add user guide for marvell cnxk ml driver Srikanth Yalavarthi
2023-03-10 8:20 ` [PATCH v6 39/39] ml/cnxk: add support for configurable ocm page Srikanth Yalavarthi
2023-03-10 9:31 ` [PATCH v6 00/39] Implementation of ML CNXK driver Thomas Monjalon
2023-03-10 10:30 ` [EXT] " Srikanth Yalavarthi
2023-03-10 15:24 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310082015.20200-20-syalavarthi@marvell.com \
--to=syalavarthi@marvell.com \
--cc=aprabhu@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=pshukla@marvell.com \
--cc=ptakkar@marvell.com \
--cc=sshankarnara@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).