From: beilei.xing@intel.com
To: jingjing.wu@intel.com
Cc: dev@dpdk.org, mingxia.liu@intel.com,
Beilei Xing <beilei.xing@intel.com>,
Xiao Wang <xiao.w.wang@intel.com>
Subject: [PATCH v4 07/13] net/cpfl: support hairpin queue configuration
Date: Fri, 26 May 2023 07:38:44 +0000 [thread overview]
Message-ID: <20230526073850.101079-8-beilei.xing@intel.com> (raw)
In-Reply-To: <20230526073850.101079-1-beilei.xing@intel.com>
From: Beilei Xing <beilei.xing@intel.com>
This patch supports Rx/Tx hairpin queue configuration.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Mingxia Liu <mingxia.liu@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
---
drivers/net/cpfl/cpfl_ethdev.c | 136 +++++++++++++++++++++++++++++++--
drivers/net/cpfl/cpfl_rxtx.c | 80 +++++++++++++++++++
drivers/net/cpfl/cpfl_rxtx.h | 7 ++
3 files changed, 217 insertions(+), 6 deletions(-)
diff --git a/drivers/net/cpfl/cpfl_ethdev.c b/drivers/net/cpfl/cpfl_ethdev.c
index b17c538ec2..a06def06d0 100644
--- a/drivers/net/cpfl/cpfl_ethdev.c
+++ b/drivers/net/cpfl/cpfl_ethdev.c
@@ -742,33 +742,157 @@ cpfl_config_rx_queues_irqs(struct rte_eth_dev *dev)
return idpf_vport_irq_map_config(vport, nb_rx_queues);
}
+/* Update hairpin_info for dev's tx hairpin queue */
+static int
+cpfl_txq_hairpin_info_update(struct rte_eth_dev *dev, uint16_t rx_port)
+{
+ struct cpfl_vport *cpfl_tx_vport = dev->data->dev_private;
+ struct rte_eth_dev *peer_dev = &rte_eth_devices[rx_port];
+ struct cpfl_vport *cpfl_rx_vport = peer_dev->data->dev_private;
+ struct cpfl_txq_hairpin_info *hairpin_info;
+ struct cpfl_tx_queue *cpfl_txq;
+ int i;
+
+ for (i = cpfl_tx_vport->nb_data_txq; i < dev->data->nb_tx_queues; i++) {
+ cpfl_txq = dev->data->tx_queues[i];
+ hairpin_info = &cpfl_txq->hairpin_info;
+ if (hairpin_info->peer_rxp != rx_port) {
+ PMD_DRV_LOG(ERR, "port %d is not the peer port", rx_port);
+ return -EINVAL;
+ }
+ hairpin_info->peer_rxq_id =
+ cpfl_hw_qid_get(cpfl_rx_vport->p2p_q_chunks_info->rx_start_qid,
+ hairpin_info->peer_rxq_id - cpfl_rx_vport->nb_data_rxq);
+ }
+
+ return 0;
+}
+
+/* Bind Rx hairpin queue's memory zone to peer Tx hairpin queue's memory zone */
+static void
+cpfl_rxq_hairpin_mz_bind(struct rte_eth_dev *dev)
+{
+ struct cpfl_vport *cpfl_rx_vport = dev->data->dev_private;
+ struct idpf_vport *vport = &cpfl_rx_vport->base;
+ struct idpf_adapter *adapter = vport->adapter;
+ struct idpf_hw *hw = &adapter->hw;
+ struct cpfl_rx_queue *cpfl_rxq;
+ struct cpfl_tx_queue *cpfl_txq;
+ struct rte_eth_dev *peer_dev;
+ const struct rte_memzone *mz;
+ uint16_t peer_tx_port;
+ uint16_t peer_tx_qid;
+ int i;
+
+ for (i = cpfl_rx_vport->nb_data_rxq; i < dev->data->nb_rx_queues; i++) {
+ cpfl_rxq = dev->data->rx_queues[i];
+ peer_tx_port = cpfl_rxq->hairpin_info.peer_txp;
+ peer_tx_qid = cpfl_rxq->hairpin_info.peer_txq_id;
+ peer_dev = &rte_eth_devices[peer_tx_port];
+ cpfl_txq = peer_dev->data->tx_queues[peer_tx_qid];
+
+ /* bind rx queue */
+ mz = cpfl_txq->base.mz;
+ cpfl_rxq->base.rx_ring_phys_addr = mz->iova;
+ cpfl_rxq->base.rx_ring = mz->addr;
+ cpfl_rxq->base.mz = mz;
+
+ /* bind rx buffer queue */
+ mz = cpfl_txq->base.complq->mz;
+ cpfl_rxq->base.bufq1->rx_ring_phys_addr = mz->iova;
+ cpfl_rxq->base.bufq1->rx_ring = mz->addr;
+ cpfl_rxq->base.bufq1->mz = mz;
+ cpfl_rxq->base.bufq1->qrx_tail = hw->hw_addr +
+ cpfl_hw_qtail_get(cpfl_rx_vport->p2p_q_chunks_info->rx_buf_qtail_start,
+ 0, cpfl_rx_vport->p2p_q_chunks_info->rx_buf_qtail_spacing);
+ }
+}
+
static int
cpfl_start_queues(struct rte_eth_dev *dev)
{
+ struct cpfl_vport *cpfl_vport = dev->data->dev_private;
+ struct idpf_vport *vport = &cpfl_vport->base;
struct cpfl_rx_queue *cpfl_rxq;
struct cpfl_tx_queue *cpfl_txq;
+ int update_flag = 0;
int err = 0;
int i;
+ /* For normal data queues, configure, init and enale Txq.
+ * For non-manual bind hairpin queues, configure Txq.
+ */
for (i = 0; i < dev->data->nb_tx_queues; i++) {
cpfl_txq = dev->data->tx_queues[i];
if (cpfl_txq == NULL || cpfl_txq->base.tx_deferred_start)
continue;
- err = cpfl_tx_queue_start(dev, i);
+ if (!cpfl_txq->hairpin_info.hairpin_q) {
+ err = cpfl_tx_queue_start(dev, i);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to start Tx queue %u", i);
+ return err;
+ }
+ } else if (!cpfl_vport->p2p_manual_bind) {
+ if (update_flag == 0) {
+ err = cpfl_txq_hairpin_info_update(dev,
+ cpfl_txq->hairpin_info.peer_rxp);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to update Tx hairpin queue info");
+ return err;
+ }
+ update_flag = 1;
+ }
+ err = cpfl_hairpin_txq_config(vport, cpfl_txq);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to configure hairpin Tx queue %u", i);
+ return err;
+ }
+ }
+ }
+
+ /* For non-manual bind hairpin queues, configure Tx completion queue first.*/
+ if (!cpfl_vport->p2p_manual_bind && cpfl_vport->p2p_tx_complq != NULL) {
+ err = cpfl_hairpin_tx_complq_config(cpfl_vport);
if (err != 0) {
- PMD_DRV_LOG(ERR, "Fail to start Tx queue %u", i);
+ PMD_DRV_LOG(ERR, "Fail to config Tx completion queue");
return err;
}
}
+ /* For non-manual bind hairpin queues, configure Rx buffer queue.*/
+ if (!cpfl_vport->p2p_manual_bind && cpfl_vport->p2p_rx_bufq != NULL) {
+ cpfl_rxq_hairpin_mz_bind(dev);
+ err = cpfl_hairpin_rx_bufq_config(cpfl_vport);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to config Rx buffer queue");
+ return err;
+ }
+ }
+
+ /* For normal data queues, configure, init and enale Rxq.
+ * For non-manual bind hairpin queues, configure Rxq, and then init Rxq.
+ */
for (i = 0; i < dev->data->nb_rx_queues; i++) {
cpfl_rxq = dev->data->rx_queues[i];
if (cpfl_rxq == NULL || cpfl_rxq->base.rx_deferred_start)
continue;
- err = cpfl_rx_queue_start(dev, i);
- if (err != 0) {
- PMD_DRV_LOG(ERR, "Fail to start Rx queue %u", i);
- return err;
+ if (!cpfl_rxq->hairpin_info.hairpin_q) {
+ err = cpfl_rx_queue_start(dev, i);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to start Rx queue %u", i);
+ return err;
+ }
+ } else if (!cpfl_vport->p2p_manual_bind) {
+ err = cpfl_hairpin_rxq_config(vport, cpfl_rxq);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to configure hairpin Rx queue %u", i);
+ return err;
+ }
+ err = cpfl_rx_queue_init(dev, i);
+ if (err != 0) {
+ PMD_DRV_LOG(ERR, "Fail to init hairpin Rx queue %u", i);
+ return err;
+ }
}
}
diff --git a/drivers/net/cpfl/cpfl_rxtx.c b/drivers/net/cpfl/cpfl_rxtx.c
index 9625629a20..702054d1c5 100644
--- a/drivers/net/cpfl/cpfl_rxtx.c
+++ b/drivers/net/cpfl/cpfl_rxtx.c
@@ -911,6 +911,86 @@ cpfl_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
return 0;
}
+int
+cpfl_hairpin_rx_bufq_config(struct cpfl_vport *cpfl_vport)
+{
+ struct idpf_rx_queue *rx_bufq = cpfl_vport->p2p_rx_bufq;
+ struct virtchnl2_rxq_info rxq_info[1] = {0};
+
+ rxq_info[0].type = VIRTCHNL2_QUEUE_TYPE_RX_BUFFER;
+ rxq_info[0].queue_id = rx_bufq->queue_id;
+ rxq_info[0].ring_len = rx_bufq->nb_rx_desc;
+ rxq_info[0].dma_ring_addr = rx_bufq->rx_ring_phys_addr;
+ rxq_info[0].desc_ids = VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M;
+ rxq_info[0].rx_buffer_low_watermark = CPFL_RXBUF_LOW_WATERMARK;
+ rxq_info[0].model = VIRTCHNL2_QUEUE_MODEL_SPLIT;
+ rxq_info[0].data_buffer_size = rx_bufq->rx_buf_len;
+ rxq_info[0].buffer_notif_stride = CPFL_RX_BUF_STRIDE;
+
+ return idpf_vc_rxq_config_by_info(&cpfl_vport->base, rxq_info, 1);
+}
+
+int
+cpfl_hairpin_rxq_config(struct idpf_vport *vport, struct cpfl_rx_queue *cpfl_rxq)
+{
+ struct virtchnl2_rxq_info rxq_info[1] = {0};
+ struct idpf_rx_queue *rxq = &cpfl_rxq->base;
+
+ rxq_info[0].type = VIRTCHNL2_QUEUE_TYPE_RX;
+ rxq_info[0].queue_id = rxq->queue_id;
+ rxq_info[0].ring_len = rxq->nb_rx_desc;
+ rxq_info[0].dma_ring_addr = rxq->rx_ring_phys_addr;
+ rxq_info[0].rx_bufq1_id = rxq->bufq1->queue_id;
+ rxq_info[0].max_pkt_size = vport->max_pkt_len;
+ rxq_info[0].desc_ids = VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M;
+ rxq_info[0].qflags |= VIRTCHNL2_RX_DESC_SIZE_16BYTE;
+
+ rxq_info[0].data_buffer_size = rxq->rx_buf_len;
+ rxq_info[0].model = VIRTCHNL2_QUEUE_MODEL_SPLIT;
+ rxq_info[0].rx_buffer_low_watermark = CPFL_RXBUF_LOW_WATERMARK;
+
+ PMD_DRV_LOG(NOTICE, "hairpin: vport %u, Rxq id 0x%x",
+ vport->vport_id, rxq_info[0].queue_id);
+
+ return idpf_vc_rxq_config_by_info(vport, rxq_info, 1);
+}
+
+int
+cpfl_hairpin_tx_complq_config(struct cpfl_vport *cpfl_vport)
+{
+ struct idpf_tx_queue *tx_complq = cpfl_vport->p2p_tx_complq;
+ struct virtchnl2_txq_info txq_info[1] = {0};
+
+ txq_info[0].dma_ring_addr = tx_complq->tx_ring_phys_addr;
+ txq_info[0].type = VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION;
+ txq_info[0].queue_id = tx_complq->queue_id;
+ txq_info[0].ring_len = tx_complq->nb_tx_desc;
+ txq_info[0].peer_rx_queue_id = cpfl_vport->p2p_rx_bufq->queue_id;
+ txq_info[0].model = VIRTCHNL2_QUEUE_MODEL_SPLIT;
+ txq_info[0].sched_mode = VIRTCHNL2_TXQ_SCHED_MODE_FLOW;
+
+ return idpf_vc_txq_config_by_info(&cpfl_vport->base, txq_info, 1);
+}
+
+int
+cpfl_hairpin_txq_config(struct idpf_vport *vport, struct cpfl_tx_queue *cpfl_txq)
+{
+ struct idpf_tx_queue *txq = &cpfl_txq->base;
+ struct virtchnl2_txq_info txq_info[1] = {0};
+
+ txq_info[0].dma_ring_addr = txq->tx_ring_phys_addr;
+ txq_info[0].type = VIRTCHNL2_QUEUE_TYPE_TX;
+ txq_info[0].queue_id = txq->queue_id;
+ txq_info[0].ring_len = txq->nb_tx_desc;
+ txq_info[0].tx_compl_queue_id = txq->complq->queue_id;
+ txq_info[0].relative_queue_id = txq->queue_id;
+ txq_info[0].peer_rx_queue_id = cpfl_txq->hairpin_info.peer_rxq_id;
+ txq_info[0].model = VIRTCHNL2_QUEUE_MODEL_SPLIT;
+ txq_info[0].sched_mode = VIRTCHNL2_TXQ_SCHED_MODE_FLOW;
+
+ return idpf_vc_txq_config_by_info(vport, txq_info, 1);
+}
+
int
cpfl_rx_queue_init(struct rte_eth_dev *dev, uint16_t rx_queue_id)
{
diff --git a/drivers/net/cpfl/cpfl_rxtx.h b/drivers/net/cpfl/cpfl_rxtx.h
index 06198d4aad..872ebc1bfd 100644
--- a/drivers/net/cpfl/cpfl_rxtx.h
+++ b/drivers/net/cpfl/cpfl_rxtx.h
@@ -32,12 +32,15 @@
#define CPFL_RING_BASE_ALIGN 128
#define CPFL_DEFAULT_RX_FREE_THRESH 32
+#define CPFL_RXBUF_LOW_WATERMARK 64
#define CPFL_DEFAULT_TX_RS_THRESH 32
#define CPFL_DEFAULT_TX_FREE_THRESH 32
#define CPFL_SUPPORT_CHAIN_NUM 5
+#define CPFL_RX_BUF_STRIDE 64
+
struct cpfl_rxq_hairpin_info {
bool hairpin_q; /* if rx queue is a hairpin queue */
uint16_t peer_txp;
@@ -95,4 +98,8 @@ int cpfl_rx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
int cpfl_tx_hairpin_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
uint16_t nb_desc,
const struct rte_eth_hairpin_conf *conf);
+int cpfl_hairpin_tx_complq_config(struct cpfl_vport *cpfl_vport);
+int cpfl_hairpin_txq_config(struct idpf_vport *vport, struct cpfl_tx_queue *cpfl_txq);
+int cpfl_hairpin_rx_bufq_config(struct cpfl_vport *cpfl_vport);
+int cpfl_hairpin_rxq_config(struct idpf_vport *vport, struct cpfl_rx_queue *cpfl_rxq);
#endif /* _CPFL_RXTX_H_ */
--
2.26.2
next prev parent reply other threads:[~2023-05-26 8:03 UTC|newest]
Thread overview: 164+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-21 6:50 [PATCH 00/10] add hairpin queue support beilei.xing
2023-04-21 6:50 ` [PATCH 01/10] net/cpfl: refine structures beilei.xing
2023-04-21 6:50 ` [PATCH 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-04-21 6:50 ` [PATCH 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-04-24 8:48 ` Liu, Mingxia
2023-04-24 8:49 ` Liu, Mingxia
2023-05-19 5:36 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 04/10] net/cpfl: add haipin queue group during vpotr init beilei.xing
2023-04-24 8:55 ` Liu, Mingxia
2023-05-19 5:36 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-04-21 6:50 ` [PATCH 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-04-24 9:48 ` Liu, Mingxia
2023-05-19 5:43 ` Xing, Beilei
2023-04-21 6:50 ` [PATCH 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-04-21 6:50 ` [PATCH 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-04-21 6:50 ` [PATCH 09/10] net/cpfl: support peer ports get beilei.xing
2023-04-21 6:50 ` [PATCH 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-19 5:10 ` [PATCH v2 00/10] add hairpin queue support beilei.xing
2023-05-19 5:10 ` [PATCH v2 01/10] net/cpfl: refine structures beilei.xing
2023-05-19 5:10 ` [PATCH v2 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-19 5:10 ` [PATCH v2 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-05-19 5:10 ` [PATCH v2 04/10] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-19 5:10 ` [PATCH v2 04/10] net/cpfl: add haipin queue group during vpotr init beilei.xing
2023-05-19 5:10 ` [PATCH v2 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-19 5:10 ` [PATCH v2 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-19 5:10 ` [PATCH v2 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-19 5:10 ` [PATCH v2 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-19 5:10 ` [PATCH v2 09/10] net/cpfl: support peer ports get beilei.xing
2023-05-19 5:10 ` [PATCH v2 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-19 7:31 ` [PATCH v3 00/10] net/cpfl: add hairpin queue support beilei.xing
2023-05-19 7:31 ` [PATCH v3 01/10] net/cpfl: refine structures beilei.xing
2023-05-19 7:31 ` [PATCH v3 02/10] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-24 14:30 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 03/10] common/idpf: support queue groups add/delete beilei.xing
2023-05-19 7:31 ` [PATCH v3 04/10] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-24 14:38 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 05/10] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-24 9:01 ` Liu, Mingxia
2023-05-26 3:46 ` Xing, Beilei
2023-05-25 3:58 ` Wu, Jingjing
2023-05-26 3:52 ` Xing, Beilei
2023-05-19 7:31 ` [PATCH v3 06/10] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-19 7:31 ` [PATCH v3 07/10] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-25 4:12 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 08/10] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-25 4:17 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 09/10] net/cpfl: support peer ports get beilei.xing
2023-05-25 5:26 ` Wu, Jingjing
2023-05-19 7:31 ` [PATCH v3 10/10] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-26 7:38 ` [PATCH v4 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-26 7:38 ` [PATCH v4 01/13] net/cpfl: refine structures beilei.xing
2023-05-26 7:38 ` [PATCH v4 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-26 7:38 ` [PATCH v4 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-26 7:38 ` [PATCH v4 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-26 7:38 ` [PATCH v4 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-30 2:27 ` Liu, Mingxia
2023-05-30 2:49 ` Liu, Mingxia
2023-05-31 10:53 ` Xing, Beilei
2023-05-26 7:38 ` [PATCH v4 06/13] common/idpf: add queue config API beilei.xing
2023-05-26 7:38 ` beilei.xing [this message]
2023-05-26 7:38 ` [PATCH v4 08/13] common/idpf: add switch queue API beilei.xing
2023-05-26 7:38 ` [PATCH v4 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-30 3:30 ` Liu, Mingxia
2023-05-31 10:53 ` Xing, Beilei
2023-05-26 7:38 ` [PATCH v4 10/13] common/idpf: add irq map config API beilei.xing
2023-05-26 7:38 ` [PATCH v4 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-26 7:38 ` [PATCH v4 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-26 7:38 ` [PATCH v4 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-30 3:59 ` Liu, Mingxia
2023-05-31 10:54 ` Xing, Beilei
2023-05-31 10:18 ` [PATCH v5 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 10:18 ` [PATCH v5 01/13] net/cpfl: refine structures beilei.xing
2023-05-31 10:18 ` [PATCH v5 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 10:18 ` [PATCH v5 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 10:18 ` [PATCH v5 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 10:18 ` [PATCH v5 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 10:18 ` [PATCH v5 06/13] common/idpf: add queue config API beilei.xing
2023-05-31 10:18 ` [PATCH v5 07/13] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 10:18 ` [PATCH v5 08/13] common/idpf: add switch queue API beilei.xing
2023-05-31 10:18 ` [PATCH v5 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 10:18 ` [PATCH v5 10/13] common/idpf: add irq map config API beilei.xing
2023-05-31 10:18 ` [PATCH v5 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 10:18 ` [PATCH v5 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-31 10:18 ` [PATCH v5 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 10:25 ` [PATCH v6 00/13] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 10:25 ` [PATCH v6 01/13] net/cpfl: refine structures beilei.xing
2023-05-31 10:25 ` [PATCH v6 02/13] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 10:25 ` [PATCH v6 03/13] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 10:25 ` [PATCH v6 04/13] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 10:25 ` [PATCH v6 05/13] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 10:25 ` [PATCH v6 06/13] common/idpf: add queue config API beilei.xing
2023-05-31 10:25 ` [PATCH v6 07/13] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 10:25 ` [PATCH v6 08/13] common/idpf: add switch queue API beilei.xing
2023-05-31 10:25 ` [PATCH v6 09/13] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 10:25 ` [PATCH v6 10/13] common/idpf: add irq map config API beilei.xing
2023-05-31 10:25 ` [PATCH v6 11/13] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 10:25 ` [PATCH v6 12/13] net/cpfl: support peer ports get beilei.xing
2023-05-31 10:25 ` [PATCH v6 13/13] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 13:04 ` [PATCH v7 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-05-31 13:04 ` [PATCH v7 01/14] net/cpfl: refine structures beilei.xing
2023-05-31 13:04 ` [PATCH v7 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-05-31 13:04 ` [PATCH v7 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-05-31 13:04 ` [PATCH v7 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-05-31 13:04 ` [PATCH v7 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-05-31 13:04 ` [PATCH v7 06/14] common/idpf: add queue config API beilei.xing
2023-05-31 13:04 ` [PATCH v7 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-05-31 13:04 ` [PATCH v7 08/14] common/idpf: add switch queue API beilei.xing
2023-05-31 13:04 ` [PATCH v7 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-05-31 13:04 ` [PATCH v7 10/14] common/idpf: add irq map config API beilei.xing
2023-05-31 13:04 ` [PATCH v7 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-05-31 13:04 ` [PATCH v7 12/14] net/cpfl: support peer ports get beilei.xing
2023-05-31 13:04 ` [PATCH v7 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-05-31 13:04 ` [PATCH v7 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-05 6:17 ` [PATCH v8 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-05 6:17 ` [PATCH v8 01/14] net/cpfl: refine structures beilei.xing
2023-06-05 6:17 ` [PATCH v8 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-05 6:17 ` [PATCH v8 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-05 8:35 ` Wu, Jingjing
2023-06-05 8:53 ` Xing, Beilei
2023-06-05 6:17 ` [PATCH v8 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-05 6:17 ` [PATCH v8 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-05 6:17 ` [PATCH v8 06/14] common/idpf: add queue config API beilei.xing
2023-06-05 6:17 ` [PATCH v8 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-05 6:17 ` [PATCH v8 08/14] common/idpf: add switch queue API beilei.xing
2023-06-05 6:17 ` [PATCH v8 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-05 6:17 ` [PATCH v8 10/14] common/idpf: add irq map config API beilei.xing
2023-06-05 6:17 ` [PATCH v8 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-05 6:17 ` [PATCH v8 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-05 11:22 ` Wu, Jingjing
2023-06-05 6:17 ` [PATCH v8 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-05 6:17 ` [PATCH v8 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-05 9:06 ` [PATCH v9 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-05 9:06 ` [PATCH v9 01/14] net/cpfl: refine structures beilei.xing
2023-06-05 9:06 ` [PATCH v9 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-05 9:06 ` [PATCH v9 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-05 9:06 ` [PATCH v9 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-05 9:06 ` [PATCH v9 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-05 9:06 ` [PATCH v9 06/14] common/idpf: add queue config API beilei.xing
2023-06-05 9:06 ` [PATCH v9 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-05 9:06 ` [PATCH v9 08/14] common/idpf: add switch queue API beilei.xing
2023-06-05 9:06 ` [PATCH v9 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-05 9:06 ` [PATCH v9 10/14] common/idpf: add irq map config API beilei.xing
2023-06-05 9:06 ` [PATCH v9 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-05 9:06 ` [PATCH v9 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-05 9:06 ` [PATCH v9 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-05 9:06 ` [PATCH v9 14/14] doc: update the doc of CPFL PMD beilei.xing
2023-06-06 10:03 ` [PATCH v10 00/14] net/cpfl: add hairpin queue support beilei.xing
2023-06-06 6:40 ` Wu, Jingjing
2023-06-07 7:16 ` Zhang, Qi Z
2023-06-06 10:03 ` [PATCH v10 01/14] net/cpfl: refine structures beilei.xing
2023-06-06 10:03 ` [PATCH v10 02/14] common/idpf: support queue groups add/delete beilei.xing
2023-06-06 10:03 ` [PATCH v10 03/14] net/cpfl: add haipin queue group during vport init beilei.xing
2023-06-06 10:03 ` [PATCH v10 04/14] net/cpfl: support hairpin queue capbility get beilei.xing
2023-06-06 10:03 ` [PATCH v10 05/14] net/cpfl: support hairpin queue setup and release beilei.xing
2023-06-06 10:03 ` [PATCH v10 06/14] common/idpf: add queue config API beilei.xing
2023-06-06 10:03 ` [PATCH v10 07/14] net/cpfl: support hairpin queue configuration beilei.xing
2023-06-06 10:03 ` [PATCH v10 08/14] common/idpf: add switch queue API beilei.xing
2023-06-06 10:03 ` [PATCH v10 09/14] net/cpfl: support hairpin queue start/stop beilei.xing
2023-06-06 10:03 ` [PATCH v10 10/14] common/idpf: add irq map config API beilei.xing
2023-06-06 10:03 ` [PATCH v10 11/14] net/cpfl: enable write back based on ITR expire beilei.xing
2023-06-06 10:03 ` [PATCH v10 12/14] net/cpfl: support peer ports get beilei.xing
2023-06-06 10:03 ` [PATCH v10 13/14] net/cpfl: support hairpin bind/unbind beilei.xing
2023-06-06 10:03 ` [PATCH v10 14/14] doc: update the doc of CPFL PMD beilei.xing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230526073850.101079-8-beilei.xing@intel.com \
--to=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=mingxia.liu@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).