patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
To: dev@dpdk.org
Cc: david.marchand@redhat.com, carlosmn@weg.net,
	mingjinx.ye@intel.com, stable@dpdk.org
Subject: [PATCH] net/ice: fix vlan stripping in double VLAN mode
Date: Wed, 27 Mar 2024 18:44:13 +0000	[thread overview]
Message-ID: <20240327184413.3192526-1-vladimir.medvedkin@intel.com> (raw)

The ICE hardware can operate in two modes - single vlan mode
or double vlan mode. Depending on the operating mode the hardware
handles vlan header with single vlan tag differently.
When double vlan enabled, a packet with a single VLAN is treated
as a packet with outer VLAN only. Otherwise, a single VLAN in a
packet is treated as inner VLAN.

This patch fixes the logic of how vlan stripping is programmed.

Bugzilla ID: 1402

Fixes: de5da9d16430 ("net/ice: support double VLAN")
Cc: mingjinx.ye@intel.com
Cc: stable@dpdk.org

Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
---
 drivers/net/ice/ice_ethdev.c | 45 +++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 87385d2649..205c5f5f43 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -3826,7 +3826,10 @@ ice_dev_start(struct rte_eth_dev *dev)
 	ice_set_tx_function(dev);
 
 	mask = RTE_ETH_VLAN_STRIP_MASK | RTE_ETH_VLAN_FILTER_MASK |
-			RTE_ETH_VLAN_EXTEND_MASK | RTE_ETH_QINQ_STRIP_MASK;
+			RTE_ETH_VLAN_EXTEND_MASK;
+	if (ice_is_dvm_ena(hw))
+		mask |= RTE_ETH_QINQ_STRIP_MASK;
+
 	ret = ice_vlan_offload_set(dev, mask);
 	if (ret) {
 		PMD_INIT_LOG(ERR, "Unable to set VLAN offload");
@@ -4896,19 +4899,35 @@ ice_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 			ice_vsi_config_vlan_filter(vsi, false);
 	}
 
-	if (mask & RTE_ETH_VLAN_STRIP_MASK) {
-		if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
-			ice_vsi_config_vlan_stripping(vsi, true);
-		else
-			ice_vsi_config_vlan_stripping(vsi, false);
-	}
+	struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+	if (!ice_is_dvm_ena(hw)) {
+		if (mask & RTE_ETH_VLAN_STRIP_MASK) {
+			if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
+				ice_vsi_config_vlan_stripping(vsi, true);
+			else
+				ice_vsi_config_vlan_stripping(vsi, false);
+		}
 
-	if (mask & RTE_ETH_QINQ_STRIP_MASK) {
-		/* Enable or disable outer VLAN stripping */
-		if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_QINQ_STRIP)
-			ice_vsi_config_outer_vlan_stripping(vsi, true);
-		else
-			ice_vsi_config_outer_vlan_stripping(vsi, false);
+		if (mask & RTE_ETH_QINQ_STRIP_MASK) {
+			PMD_DRV_LOG(ERR, "Single VLAN mode (SVM) does not support qinq");
+			return -ENOTSUP;
+		}
+	} else {
+		if ((mask & RTE_ETH_VLAN_STRIP_MASK) |
+				(mask & RTE_ETH_QINQ_STRIP_MASK)) {
+			if (rxmode->offloads & (RTE_ETH_RX_OFFLOAD_VLAN_STRIP |
+						RTE_ETH_RX_OFFLOAD_QINQ_STRIP))
+				ice_vsi_config_outer_vlan_stripping(vsi, true);
+			else
+				ice_vsi_config_outer_vlan_stripping(vsi, false);
+		}
+
+		if (mask & RTE_ETH_QINQ_STRIP_MASK) {
+			if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_QINQ_STRIP)
+				ice_vsi_config_vlan_stripping(vsi, true);
+			else
+				ice_vsi_config_vlan_stripping(vsi, false);
+		}
 	}
 
 	return 0;
-- 
2.34.1


             reply	other threads:[~2024-03-27 18:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-27 18:44 Vladimir Medvedkin [this message]
2024-03-28 11:16 ` David Marchand
2024-04-03 14:03   ` RES: " Carlos de Souza Moraes Neto
2024-04-04 10:43 ` Bruce Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240327184413.3192526-1-vladimir.medvedkin@intel.com \
    --to=vladimir.medvedkin@intel.com \
    --cc=carlosmn@weg.net \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=mingjinx.ye@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).