From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: Akhil Goyal <akhil.goyal@nxp.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Horton, Remy" <remy.horton@intel.com>
Subject: Re: [dpdk-dev] [PATCH v5 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads
Date: Wed, 2 Jan 2019 15:29:49 +0000 [thread overview]
Message-ID: <2601191342CEEE43887BDE71AB977258010D8C04E7@IRSMSX106.ger.corp.intel.com> (raw)
In-Reply-To: <91472d97-6d0c-c816-3843-d322dc70ae5c@nxp.com>
> -----Original Message-----
> From: Akhil Goyal [mailto:akhil.goyal@nxp.com]
> Sent: Wednesday, January 2, 2019 1:43 PM
> To: Ananyev, Konstantin <konstantin.ananyev@intel.com>; dev@dpdk.org
> Cc: Horton, Remy <remy.horton@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v5 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads
>
>
>
> On 12/28/2018 9:03 PM, Konstantin Ananyev wrote:
> > Right now ipsec-secgw always enables TX offloads
> > (DEV_TX_OFFLOAD_MULTI_SEGS, DEV_TX_OFFLOAD_SECURITY),
> > even when they are not requested by the config.
> > That causes many PMD to choose full-featured TX function,
> > which in many cases is much slower then one without offloads.
> > That patch adds ability for the user to disable unneeded HW offloads.
> > If DEV_TX_OFFLOAD_IPV4_CKSUM is disabled by user, then
> > SW version of ip cksum calculation is used.
> > That allows to use vector TX function, when inline-ipsec is not
> > requested.
> >
> > Signed-off-by: Remy Horton <remy.horton@intel.com>
> > Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> > Acked-by: Radu Nicolau <radu.nicolau@intel.com>
> > ---
> > doc/guides/sample_app_ug/ipsec_secgw.rst | 12 +++
> > examples/ipsec-secgw/ipsec-secgw.c | 126 ++++++++++++++++++++---
> > examples/ipsec-secgw/ipsec.h | 6 ++
> > examples/ipsec-secgw/sa.c | 35 +++++++
> > 4 files changed, 164 insertions(+), 15 deletions(-)
> >
> > diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
> > index 4869a011d..244bde2de 100644
> > --- a/doc/guides/sample_app_ug/ipsec_secgw.rst
> > +++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
> > @@ -95,6 +95,8 @@ The application has a number of command line options::
> > -p PORTMASK -P -u PORTMASK -j FRAMESIZE
> > --config (port,queue,lcore)[,(port,queue,lcore]
> > --single-sa SAIDX
> > + --rxoffload MASK
> > + --txoffload MASK
> > -f CONFIG_FILE_PATH
> >
> > Where:
> > @@ -119,6 +121,16 @@ Where:
> > on both Inbound and Outbound. This option is meant for debugging/performance
> > purposes.
> >
> > +* ``--rxoffload MASK``: RX HW offload capabilities to enable/use on this port
> > + (bitmask of DEV_RX_OFFLOAD_* values). It is an optional parameter and
> > + allows user to disable some of the RX HW offload capabilities.
> > + By default all HW RX offloads are enabled.
> > +
> > +* ``--txoffload MASK``: TX HW offload capabilities to enable/use on this port
> > + (bitmask of DEV_TX_OFFLOAD_* values). It is an optional parameter and
> > + allows user to disable some of the TX HW offload capabilities.
> > + By default all HW TX offloads are enabled.
> > +
> by default all should not be enabled. It should remain as it was before
> your patchset.
It remains as it was before the patchset.
By default we initialize dev_rx_offload/dev_tx_offloads to (uint64_t)-1;
Then:
dev_info.rx_offload_capa &= dev_rx_offload;
to disable unwanted capabilities.
Then:
if ((local_port_conf.rxmode.offloads & dev_info.rx_offload_capa)
to check that all required capabilities are supported.
> It would be good if you can add a link to ethdev section where it
> explain different offloads available.
>
> If anyone needs to change the default behavior, a patch need to be
> submitted to add that.
> > * ``-f CONFIG_FILE_PATH``: the full path of text-based file containing all
> > configuration items for running the application (See Configuration file
> > syntax section below). ``-f CONFIG_FILE_PATH`` **must** be specified.
> > diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> > index 1bc0b5b50..f5db3da0c 100644
> > --- a/examples/ipsec-secgw/ipsec-secgw.c
> > +++ b/examples/ipsec-secgw/ipsec-secgw.c
> > @@ -124,6 +124,8 @@ struct ethaddr_info ethaddr_tbl[RTE_MAX_ETHPORTS] = {
> > #define CMD_LINE_OPT_CONFIG "config"
> > #define CMD_LINE_OPT_SINGLE_SA "single-sa"
> > #define CMD_LINE_OPT_CRYPTODEV_MASK "cryptodev_mask"
> > +#define CMD_LINE_OPT_RX_OFFLOAD "rxoffload"
> > +#define CMD_LINE_OPT_TX_OFFLOAD "txoffload"
> >
> > enum {
> > /* long options mapped to a short option */
> > @@ -135,12 +137,16 @@ enum {
> > CMD_LINE_OPT_CONFIG_NUM,
> > CMD_LINE_OPT_SINGLE_SA_NUM,
> > CMD_LINE_OPT_CRYPTODEV_MASK_NUM,
> > + CMD_LINE_OPT_RX_OFFLOAD_NUM,
> > + CMD_LINE_OPT_TX_OFFLOAD_NUM,
> > };
> >
> > static const struct option lgopts[] = {
> > {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM},
> > {CMD_LINE_OPT_SINGLE_SA, 1, 0, CMD_LINE_OPT_SINGLE_SA_NUM},
> > {CMD_LINE_OPT_CRYPTODEV_MASK, 1, 0, CMD_LINE_OPT_CRYPTODEV_MASK_NUM},
> > + {CMD_LINE_OPT_RX_OFFLOAD, 1, 0, CMD_LINE_OPT_RX_OFFLOAD_NUM},
> > + {CMD_LINE_OPT_TX_OFFLOAD, 1, 0, CMD_LINE_OPT_TX_OFFLOAD_NUM},
> > {NULL, 0, 0, 0}
> > };
> >
> > @@ -155,6 +161,13 @@ static uint32_t single_sa;
> > static uint32_t single_sa_idx;
> > static uint32_t frame_size;
> >
> > +/*
> > + * RX/TX HW offload capabilities to enable/use on ethernet ports.
> > + * By default all capabilities are enabled.
> > + */
> > +static uint64_t dev_rx_offload = UINT64_MAX;
> > +static uint64_t dev_tx_offload = UINT64_MAX;
> > +
> > struct lcore_rx_queue {
> > uint16_t port_id;
> > uint8_t queue_id;
> > @@ -208,8 +221,6 @@ static struct rte_eth_conf port_conf = {
> > },
> > .txmode = {
> > .mq_mode = ETH_MQ_TX_NONE,
> > - .offloads = (DEV_TX_OFFLOAD_IPV4_CKSUM |
> > - DEV_TX_OFFLOAD_MULTI_SEGS),
> > },
> > };
> >
> > @@ -315,7 +326,8 @@ prepare_traffic(struct rte_mbuf **pkts, struct ipsec_traffic *t,
> > }
> >
> > static inline void
> > -prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port)
> > +prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port,
> > + const struct lcore_conf *qconf)
> > {
> > struct ip *ip;
> > struct ether_hdr *ethhdr;
> > @@ -325,14 +337,19 @@ prepare_tx_pkt(struct rte_mbuf *pkt, uint16_t port)
> > ethhdr = (struct ether_hdr *)rte_pktmbuf_prepend(pkt, ETHER_HDR_LEN);
> >
> > if (ip->ip_v == IPVERSION) {
> > - pkt->ol_flags |= PKT_TX_IP_CKSUM | PKT_TX_IPV4;
> > + pkt->ol_flags |= qconf->outbound.ipv4_offloads;
> > pkt->l3_len = sizeof(struct ip);
> > pkt->l2_len = ETHER_HDR_LEN;
> >
> > ip->ip_sum = 0;
> > +
> > + /* calculate IPv4 cksum in SW */
> > + if ((pkt->ol_flags & PKT_TX_IP_CKSUM) == 0)
> > + ip->ip_sum = rte_ipv4_cksum((struct ipv4_hdr *)ip);
> > +
> something is not correct, on my hardware I still see rte_ipv4_cksum
> getting called.
My bad - screwed part of Remy's changes while introducing offloads options.
Will fix it in v6.
Konstantin
next prev parent reply other threads:[~2019-01-02 15:29 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 18:49 [dpdk-dev] [PATCH 0/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 1/7] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 0/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 1/7] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 0/8] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-07 10:01 ` Radu Nicolau
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 0/9] " Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 1/9] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-21 13:57 ` Akhil Goyal
2018-12-21 15:58 ` Ananyev, Konstantin
2018-12-24 9:45 ` Akhil Goyal
2018-12-24 10:19 ` Ananyev, Konstantin
2018-12-24 10:54 ` Akhil Goyal
2018-12-24 10:55 ` Akhil Goyal
2018-12-24 11:22 ` Ananyev, Konstantin
2018-12-24 11:24 ` Akhil Goyal
2018-12-24 11:37 ` Ananyev, Konstantin
2018-12-24 12:31 ` Akhil Goyal
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-02 8:48 ` Akhil Goyal
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-02 13:42 ` Akhil Goyal
2019-01-02 15:29 ` Ananyev, Konstantin [this message]
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-04 11:37 ` Akhil Goyal
2019-01-04 12:29 ` Ananyev, Konstantin
2019-01-04 14:40 ` Akhil Goyal
2019-01-04 15:02 ` Akhil Goyal
2019-01-04 17:04 ` Ananyev, Konstantin
2019-01-04 17:38 ` Akhil Goyal
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-10 15:20 ` Akhil Goyal
2019-01-11 1:08 ` Xu, Yanjie
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 01/10] examples/ipsec-secgw: allow user to disable some RX/TX offloads Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 00/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-11 0:00 ` De Lara Guarch, Pablo
2019-01-11 0:16 ` Ananyev, Konstantin
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 01/10] examples/ipsec-secgw: allow user to disable some Rx/Tx offloads Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 02/10] examples/ipsec-secgw: allow to specify neighbour MAC address Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-10 21:09 ` [dpdk-dev] [PATCH v8 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-11 2:49 ` Varghese, Vipin
2019-01-11 6:56 ` Akhil Goyal
2019-01-11 8:11 ` Varghese, Vipin
2019-01-12 23:49 ` Thomas Monjalon
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-09 11:44 ` [dpdk-dev] [PATCH v7 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2019-01-04 14:58 ` Akhil Goyal
2019-01-04 16:25 ` Ananyev, Konstantin
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2019-01-03 20:25 ` [dpdk-dev] [PATCH v6 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2019-01-04 2:42 ` Varghese, Vipin
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 02/10] examples/ipsec-secgw: allow to specify neighbour mac address Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 03/10] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2019-01-02 11:44 ` Akhil Goyal
2019-01-02 13:43 ` Ananyev, Konstantin
2019-01-02 13:50 ` Akhil Goyal
2019-01-02 15:06 ` Ananyev, Konstantin
2019-01-03 20:36 ` Ananyev, Konstantin
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 04/10] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 05/10] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 06/10] examples/ipsec-secgw: fix inbound SA checking Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 07/10] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 08/10] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 09/10] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-12-28 15:33 ` [dpdk-dev] [PATCH v5 10/10] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 2/9] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-12-21 14:05 ` Akhil Goyal
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 3/9] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-12-21 14:12 ` Akhil Goyal
2018-12-21 14:49 ` Ananyev, Konstantin
2018-12-21 14:57 ` Akhil Goyal
2018-12-21 15:01 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 4/9] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-21 14:25 ` Akhil Goyal
2018-12-21 14:54 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 5/9] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 6/9] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-21 15:15 ` Akhil Goyal
2018-12-24 12:29 ` Ananyev, Konstantin
2018-12-24 12:32 ` Akhil Goyal
2018-12-24 12:37 ` Ananyev, Konstantin
2018-12-24 13:21 ` Ananyev, Konstantin
2018-12-24 13:50 ` Akhil Goyal
2018-12-24 15:01 ` Ananyev, Konstantin
2018-12-26 9:02 ` Akhil Goyal
2018-12-27 11:06 ` Ananyev, Konstantin
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 7/9] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-21 15:23 ` Akhil Goyal
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 8/9] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-12-14 16:40 ` [dpdk-dev] [PATCH v4 9/9] doc: update ipsec-secgw guide and relelase notes Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 1/8] examples/ipsec-secgw: avoid to request unused TX offloads Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 2/8] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 3/8] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 4/8] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 5/8] examples/ipsec-secgw: make local variables static Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 6/8] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 7/8] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-12-06 15:54 ` [dpdk-dev] [PATCH v3 8/8] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 2/7] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 3/7] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 4/7] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 5/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 6/7] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-11-30 17:04 ` [dpdk-dev] [PATCH v2 7/7] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 2/7] examples/ipsec-secgw: allow to specify neighbor mac address Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 3/7] examples/ipsec-secgw: fix crypto-op might never get dequeued Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 4/7] examples/ipsec-secgw: fix outbound codepath for single SA Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 5/7] examples/ipsec-secgw: make app to use ipsec library Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 6/7] examples/ipsec-secgw: make data-path " Konstantin Ananyev
2018-11-22 18:49 ` [dpdk-dev] [PATCH 7/7] examples/ipsec-secgw: add scripts for functional test Konstantin Ananyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2601191342CEEE43887BDE71AB977258010D8C04E7@IRSMSX106.ger.corp.intel.com \
--to=konstantin.ananyev@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=remy.horton@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).