DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
	"Yigit, Ferruh" <ferruh.yigit@intel.com>,
	"Stokes, Ian" <ian.stokes@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>
Cc: "stephen@networkplumber.org" <stephen@networkplumber.org>,
	"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
	"Xing, Beilei" <beilei.xing@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 6/7] net/e1000: set min and max MTU for igb devices
Date: Tue, 26 Mar 2019 14:02:22 +0000	[thread overview]
Message-ID: <2601191342CEEE43887BDE71AB97725801365600E4@irsmsx105.ger.corp.intel.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E7061153354B5E@SHSMSX103.ccr.corp.intel.com>


Hi Qi,

> >
> > On 3/22/2019 1:01 PM, Ian Stokes wrote:
> > > This commit sets the min and max supported MTU values for igb devices
> > > via the eth_igb_info_get() function. Min MTU supported is set to
> > > ETHER_MIN_MTU and max mtu is calculated as the max packet length
> > > supported minus the transport overhead. To aid in these calculations a
> > > new MACRO 'E1000_ETH_OVERHEAD' has been introduced to consolidate
> > > overhead calculation and avoid duplication.
> > >
> > > Signed-off-by: Ian Stokes <ian.stokes@intel.com>
> > > ---
> > >  drivers/net/e1000/e1000_ethdev.h | 6 ++++++
> > >  drivers/net/e1000/igb_ethdev.c   | 7 +++++--
> > >  2 files changed, 11 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/net/e1000/e1000_ethdev.h
> > > b/drivers/net/e1000/e1000_ethdev.h
> > > index 94edff08e..3e74cd8fe 100644
> > > --- a/drivers/net/e1000/e1000_ethdev.h
> > > +++ b/drivers/net/e1000/e1000_ethdev.h
> > > @@ -89,6 +89,12 @@
> > >  	ETH_RSS_IPV6_UDP_EX)
> > >
> > >  /*
> > > + * The overhead from MTU to max frame size.
> > > + * Considering VLAN so a tag needs to be counted.
> > > + */
> > > +#define E1000_ETH_OVERHEAD (ETHER_HDR_LEN + ETHER_CRC_LEN +
> > > +VLAN_TAG_SIZE)
> >
> > As an overhead, following drivers set:
> > i40e: HDR + CRC + 2 * VLAN
> > ixgbe: HDR + CRC
> > e1000: HDR + CRC + VLAN
> >
> > I wonder if this difference is HW limitation, or driver limitation or just
> > implementation inconsistency.
> 
> I think this is implementation inconsistency
> 
> The NIC only accept Max Frame Size.
> 
> The problem here is seems all of three setup are not perfect.
> 
> HDR + CRC + 2 * VLAN - it may allow non vlan or single vlan packet that exceed mtu.

Hmm, wonder how?

> HDR + CRC - it may reject vlan or double vlan packet that follow mtu.
> HDR + CRC + VLAN ,  it may reject double vlan packet that follow mtu
> 
> I agree it's better to keep consistent on all drivers, but before this, we may need to decide which one we should take :)
> 
> Regards
> Qi
> 
> >
> > Better to confirm it that it is not implementation inconsistency.
> >
> > Wenzhuo, Konstantin, Beilei, Qi,
> >
> > Can you please comment?
> >
> > Thanks,
> > ferruh


  parent reply	other threads:[~2019-03-26 14:02 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-22 13:01 [dpdk-dev] [PATCH v2 0/7] ethdev: add min/max MTU to device info Ian Stokes
2019-03-22 13:01 ` Ian Stokes
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 1/7] " Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-25 14:26   ` Ferruh Yigit
2019-03-25 14:26     ` Ferruh Yigit
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 2/7] net/i40e: set min and max MTU for i40e devices Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 3/7] net/i40e: set min and max MTU for i40e VF devices Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 4/7] net/ixgbe: set min and max MTU for ixgbe devices Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 5/7] net/ixgbe: set min and max MTU for ixgbe VF devices Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 6/7] net/e1000: set min and max MTU for igb devices Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-25 14:25   ` Ferruh Yigit
2019-03-25 14:25     ` Ferruh Yigit
2019-03-26 13:58     ` Zhang, Qi Z
2019-03-26 13:58       ` Zhang, Qi Z
2019-03-26 14:02       ` Ananyev, Konstantin [this message]
2019-03-26 14:02         ` Ananyev, Konstantin
2019-03-26 14:09         ` Zhang, Qi Z
2019-03-26 14:09           ` Zhang, Qi Z
2019-03-26 14:18           ` Ananyev, Konstantin
2019-03-26 14:18             ` Ananyev, Konstantin
2019-03-27  1:13             ` Zhang, Qi Z
2019-03-27  1:13               ` Zhang, Qi Z
2019-03-27  7:02             ` Zhang, Qi Z
2019-03-27  7:02               ` Zhang, Qi Z
2019-03-22 13:01 ` [dpdk-dev] [PATCH v2 7/7] app/testpmd: verify mtu with rte_eth_dev_info_get() Ian Stokes
2019-03-22 13:01   ` Ian Stokes
2019-03-25 14:20   ` Ferruh Yigit
2019-03-25 14:20     ` Ferruh Yigit
2019-03-28 16:41     ` Ferruh Yigit
2019-03-28 16:41       ` Ferruh Yigit
2019-03-28 16:43 ` [dpdk-dev] [PATCH v2 0/7] ethdev: add min/max MTU to device info Ferruh Yigit
2019-03-28 16:43   ` Ferruh Yigit
2019-03-29 17:52 ` [dpdk-dev] [PATCH v3 1/7] " Ferruh Yigit
2019-03-29 17:52   ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 2/7] net/i40e: set min and max MTU for i40e devices Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 3/7] net/i40e: set min and max MTU for i40e VF devices Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 4/7] net/ixgbe: set min and max MTU for ixgbe devices Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 5/7] net/ixgbe: set min and max MTU for ixgbe VF devices Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 6/7] net/e1000: set min and max MTU for igb devices Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:52   ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: verify MTU with device provided limits Ferruh Yigit
2019-03-29 17:52     ` Ferruh Yigit
2019-03-29 17:56   ` [dpdk-dev] [PATCH v3 1/7] ethdev: add min/max MTU to device info Ferruh Yigit
2019-03-29 17:56     ` Ferruh Yigit
2019-03-29 18:05     ` Ferruh Yigit
2019-03-29 18:05       ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2601191342CEEE43887BDE71AB97725801365600E4@irsmsx105.ger.corp.intel.com \
    --to=konstantin.ananyev@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=ian.stokes@intel.com \
    --cc=qi.z.zhang@intel.com \
    --cc=stephen@networkplumber.org \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).