From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: "Kulasek, TomaszX" <tomaszx.kulasek@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 0/6] add Tx preparation
Date: Fri, 30 Sep 2016 09:55:34 +0000 [thread overview]
Message-ID: <2601191342CEEE43887BDE71AB9772583F0BCD64@irsmsx105.ger.corp.intel.com> (raw)
In-Reply-To: <20160930090039.10164-1-tomaszx.kulasek@intel.com>
>
> As discussed in that thread:
>
> http://dpdk.org/ml/archives/dev/2015-September/023603.html
>
> Different NIC models depending on HW offload requested might impose different requirements on packets to be TX-ed in terms of:
>
> - Max number of fragments per packet allowed
> - Max number of fragments per TSO segments
> - The way pseudo-header checksum should be pre-calculated
> - L3/L4 header fields filling
> - etc.
>
>
> MOTIVATION:
> -----------
>
> 1) Some work cannot (and didn't should) be done in rte_eth_tx_burst.
> However, this work is sometimes required, and now, it's an
> application issue.
>
> 2) Different hardware may have different requirements for TX offloads,
> other subset can be supported and so on.
>
> 3) Some parameters (e.g. number of segments in ixgbe driver) may hung
> device. These parameters may be vary for different devices.
>
> For example i40e HW allows 8 fragments per packet, but that is after
> TSO segmentation. While ixgbe has a 38-fragment pre-TSO limit.
>
> 4) Fields in packet may require different initialization (like e.g. will
> require pseudo-header checksum precalculation, sometimes in a
> different way depending on packet type, and so on). Now application
> needs to care about it.
>
> 5) Using additional API (rte_eth_tx_prep) before rte_eth_tx_burst let to
> prepare packet burst in acceptable form for specific device.
>
> 6) Some additional checks may be done in debug mode keeping tx_burst
> implementation clean.
>
>
> PROPOSAL:
> ---------
>
> To help user to deal with all these varieties we propose to:
>
> 1) Introduce rte_eth_tx_prep() function to do necessary preparations of
> packet burst to be safely transmitted on device for desired HW
> offloads (set/reset checksum field according to the hardware
> requirements) and check HW constraints (number of segments per
> packet, etc).
>
> While the limitations and requirements may differ for devices, it
> requires to extend rte_eth_dev structure with new function pointer
> "tx_pkt_prep" which can be implemented in the driver to prepare and
> verify packets, in devices specific way, before burst, what should to
> prevent application to send malformed packets.
>
> 2) Also new fields will be introduced in rte_eth_desc_lim:
> nb_seg_max and nb_mtu_seg_max, providing an information about max
> segments in TSO and non-TSO packets acceptable by device.
>
> This information is useful for application to not create/limit
> malicious packet.
>
>
> APPLICATION (CASE OF USE):
> --------------------------
>
> 1) Application should to initialize burst of packets to send, set
> required tx offload flags and required fields, like l2_len, l3_len,
> l4_len, and tso_segsz
>
> 2) Application passes burst to the rte_eth_tx_prep to check conditions
> required to send packets through the NIC.
>
> 3) The result of rte_eth_tx_prep can be used to send valid packets
> and/or restore invalid if function fails.
>
> e.g.
>
> for (i = 0; i < nb_pkts; i++) {
>
> /* initialize or process packet */
>
> bufs[i]->tso_segsz = 800;
> bufs[i]->ol_flags = PKT_TX_TCP_SEG | PKT_TX_IPV4
> | PKT_TX_IP_CKSUM;
> bufs[i]->l2_len = sizeof(struct ether_hdr);
> bufs[i]->l3_len = sizeof(struct ipv4_hdr);
> bufs[i]->l4_len = sizeof(struct tcp_hdr);
> }
>
> /* Prepare burst of TX packets */
> nb_prep = rte_eth_tx_prep(port, 0, bufs, nb_pkts);
>
> if (nb_prep < nb_pkts) {
> printf("tx_prep failed\n");
>
> /* nb_prep indicates here first invalid packet. rte_eth_tx_prep
> * can be used on remaining packets to find another ones.
> */
>
> }
>
> /* Send burst of TX packets */
> nb_tx = rte_eth_tx_burst(port, 0, bufs, nb_prep);
>
> /* Free any unsent packets. */
>
> v4 changes:
> - tx_prep is now set to default behavior (NULL) for simple/vector path
> in fm10k, i40e and ixgbe drivers to increase performance, when
> Tx offloads are not intentionally available
>
> v3 changes:
> - reworked csum testpmd engine instead adding new one,
> - fixed checksum initialization procedure to include also outer
> checksum offloads,
> - some minor formattings and optimalizations
>
> v2 changes:
> - rte_eth_tx_prep() returns number of packets when device doesn't
> support tx_prep functionality,
> - introduced CONFIG_RTE_ETHDEV_TX_PREP allowing to turn off tx_prep
>
>
> Tomasz Kulasek (6):
> ethdev: add Tx preparation
> e1000: add Tx preparation
> fm10k: add Tx preparation
> i40e: add Tx preparation
> ixgbe: add Tx preparation
> testpmd: use Tx preparation in csum engine
>
> app/test-pmd/csumonly.c | 97 +++++++++++++++------------
> config/common_base | 1 +
> drivers/net/e1000/e1000_ethdev.h | 11 ++++
> drivers/net/e1000/em_ethdev.c | 5 +-
> drivers/net/e1000/em_rxtx.c | 48 +++++++++++++-
> drivers/net/e1000/igb_ethdev.c | 4 ++
> drivers/net/e1000/igb_rxtx.c | 52 ++++++++++++++-
> drivers/net/fm10k/fm10k.h | 6 ++
> drivers/net/fm10k/fm10k_ethdev.c | 5 ++
> drivers/net/fm10k/fm10k_rxtx.c | 50 +++++++++++++-
> drivers/net/i40e/i40e_ethdev.c | 3 +
> drivers/net/i40e/i40e_rxtx.c | 72 ++++++++++++++++++++-
> drivers/net/i40e/i40e_rxtx.h | 8 +++
> drivers/net/ixgbe/ixgbe_ethdev.c | 3 +
> drivers/net/ixgbe/ixgbe_ethdev.h | 5 +-
> drivers/net/ixgbe/ixgbe_rxtx.c | 56 +++++++++++++++-
> drivers/net/ixgbe/ixgbe_rxtx.h | 2 +
> lib/librte_ether/rte_ethdev.h | 85 ++++++++++++++++++++++++
> lib/librte_mbuf/rte_mbuf.h | 8 +++
> lib/librte_net/Makefile | 2 +-
> lib/librte_net/rte_pkt.h | 133 ++++++++++++++++++++++++++++++++++++++
> 21 files changed, 605 insertions(+), 51 deletions(-) create mode 100644 lib/librte_net/rte_pkt.h
>
> --
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> 1.7.9.5
next prev parent reply other threads:[~2016-09-30 9:55 UTC|newest]
Thread overview: 260+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 16:22 [dpdk-dev] [PATCH " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 1/6] ethdev: " Tomasz Kulasek
2016-09-08 7:28 ` Jerin Jacob
2016-09-08 16:09 ` Kulasek, TomaszX
2016-09-09 5:58 ` Jerin Jacob
2016-08-26 16:22 ` [dpdk-dev] [PATCH 2/6] e1000: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 3/6] fm10k: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 4/6] i40e: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 5/6] ixgbe: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-08-26 17:31 ` [dpdk-dev] [PATCH 0/6] add Tx preparation Stephen Hemminger
2016-08-31 12:34 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 1/6] ethdev: " Tomasz Kulasek
2016-09-19 13:03 ` Ananyev, Konstantin
2016-09-19 15:29 ` Kulasek, TomaszX
2016-09-19 16:06 ` Jerin Jacob
2016-09-20 9:06 ` Ananyev, Konstantin
2016-09-21 8:29 ` Jerin Jacob
2016-09-22 9:36 ` Ananyev, Konstantin
2016-09-22 9:59 ` Jerin Jacob
2016-09-23 9:41 ` Ananyev, Konstantin
2016-09-23 10:29 ` Jerin Jacob
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 2/6] e1000: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 3/6] fm10k: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 4/6] i40e: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 5/6] ixgbe: " Tomasz Kulasek
2016-09-19 12:54 ` Ananyev, Konstantin
2016-09-19 13:58 ` Kulasek, TomaszX
2016-09-19 15:23 ` Ananyev, Konstantin
2016-09-20 7:15 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-09-19 12:59 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 0/6] add Tx preparation Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 1/6] ethdev: " Tomasz Kulasek
2016-09-29 10:40 ` Ananyev, Konstantin
2016-09-29 13:04 ` Kulasek, TomaszX
2016-09-29 13:57 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 2/6] e1000: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 3/6] fm10k: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 4/6] i40e: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 5/6] ixgbe: " Tomasz Kulasek
2016-09-29 11:09 ` Ananyev, Konstantin
2016-09-29 15:12 ` Kulasek, TomaszX
2016-09-29 17:01 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 0/6] add Tx preparation Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 1/6] ethdev: " Tomasz Kulasek
2016-10-10 14:08 ` Thomas Monjalon
2016-10-13 7:08 ` Thomas Monjalon
2016-10-13 10:47 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 2/6] e1000: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 3/6] fm10k: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 4/6] i40e: " Tomasz Kulasek
2016-10-10 14:02 ` Wu, Jingjing
2016-10-10 17:20 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 5/6] ixgbe: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:55 ` Ananyev, Konstantin [this message]
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 0/6] add Tx preparation Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 1/6] ethdev: " Tomasz Kulasek
2016-10-13 19:21 ` Thomas Monjalon
2016-10-14 14:02 ` Kulasek, TomaszX
2016-10-14 14:20 ` Thomas Monjalon
2016-10-17 16:25 ` Kulasek, TomaszX
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 2/6] e1000: " Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 3/6] fm10k: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 4/6] i40e: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 5/6] ixgbe: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 1/6] ethdev: " Tomasz Kulasek
2016-10-18 14:57 ` Olivier Matz
2016-10-19 15:42 ` Kulasek, TomaszX
2016-10-19 22:07 ` Ananyev, Konstantin
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 2/6] e1000: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 3/6] fm10k: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 4/6] i40e: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 5/6] ixgbe: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-18 12:28 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Ananyev, Konstantin
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 1/6] ethdev: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 2/6] e1000: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 3/6] fm10k: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 4/6] i40e: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 0/6] add Tx preparation Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 1/6] ethdev: " Tomasz Kulasek
2016-10-24 12:14 ` Ananyev, Konstantin
2016-10-24 12:49 ` Kulasek, TomaszX
2016-10-24 12:56 ` Ananyev, Konstantin
2016-10-24 14:12 ` Kulasek, TomaszX
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 2/6] e1000: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 3/6] fm10k: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 4/6] i40e: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 1/6] ethdev: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 2/6] e1000: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 3/6] fm10k: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 4/6] i40e: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 1/6] ethdev: " Tomasz Kulasek
2016-10-25 14:41 ` Olivier Matz
2016-10-25 17:28 ` Kulasek, TomaszX
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 2/6] e1000: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 3/6] fm10k: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 4/6] i40e: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 17:26 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Ananyev, Konstantin
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 1/6] ethdev: " Tomasz Kulasek
2016-10-27 12:38 ` Olivier Matz
2016-10-27 15:01 ` Thomas Monjalon
2016-10-27 15:52 ` Ananyev, Konstantin
2016-10-27 16:02 ` Thomas Monjalon
2016-10-27 16:24 ` Ananyev, Konstantin
2016-10-27 16:39 ` Thomas Monjalon
2016-10-28 11:29 ` Ananyev, Konstantin
2016-10-28 11:34 ` Ananyev, Konstantin
2016-10-28 12:23 ` Thomas Monjalon
2016-10-28 12:59 ` Ananyev, Konstantin
2016-10-28 13:42 ` Thomas Monjalon
2016-11-01 12:57 ` Ananyev, Konstantin
2016-11-04 11:35 ` Thomas Monjalon
2016-10-27 16:39 ` Kulasek, TomaszX
2016-10-28 10:15 ` Ananyev, Konstantin
2016-10-28 10:22 ` Kulasek, TomaszX
2016-10-28 10:22 ` Thomas Monjalon
2016-10-28 10:28 ` Ananyev, Konstantin
2016-10-28 11:02 ` Richardson, Bruce
2016-10-28 11:14 ` Jerin Jacob
2016-10-27 16:29 ` Kulasek, TomaszX
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 2/6] e1000: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 3/6] fm10k: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 4/6] i40e: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 5/6] ixgbe: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 1/6] ethdev: " Tomasz Kulasek
2016-11-28 10:54 ` Thomas Monjalon
2016-12-01 16:24 ` Thomas Monjalon
2016-12-01 19:20 ` Kulasek, TomaszX
2016-12-01 19:52 ` Thomas Monjalon
2016-12-01 21:56 ` Jerin Jacob
2016-12-01 22:31 ` Kulasek, TomaszX
2016-12-01 23:50 ` Thomas Monjalon
2016-12-09 13:25 ` Kulasek, TomaszX
2016-12-02 0:10 ` Ananyev, Konstantin
2016-12-22 13:14 ` Thomas Monjalon
2016-12-22 13:37 ` Jerin Jacob
2016-12-01 16:26 ` Thomas Monjalon
2016-12-01 16:28 ` Thomas Monjalon
2016-12-02 1:06 ` Ananyev, Konstantin
2016-12-02 8:24 ` Olivier Matz
2016-12-02 16:17 ` Ananyev, Konstantin
2016-12-08 17:24 ` Olivier Matz
2016-12-09 17:19 ` Kulasek, TomaszX
2016-12-12 11:51 ` Ananyev, Konstantin
2016-12-22 13:30 ` Thomas Monjalon
2016-12-22 14:11 ` Ananyev, Konstantin
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 2/6] e1000: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 3/6] fm10k: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 4/6] i40e: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 5/6] ixgbe: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-07 11:13 ` Ferruh Yigit
2016-12-07 12:00 ` Mcnamara, John
2016-12-07 12:12 ` Kulasek, TomaszX
2016-12-07 12:49 ` Ananyev, Konstantin
2016-12-07 12:00 ` Kulasek, TomaszX
2016-11-28 11:03 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Thomas Monjalon
2016-11-30 5:48 ` John Daley (johndale)
2016-11-30 10:59 ` Ananyev, Konstantin
2016-11-30 7:40 ` Adrien Mazarguil
2016-11-30 8:50 ` Thomas Monjalon
2016-11-30 10:30 ` Kulasek, TomaszX
2016-12-01 7:19 ` Adrien Mazarguil
2016-11-30 10:54 ` Ananyev, Konstantin
2016-12-01 7:15 ` Adrien Mazarguil
2016-12-01 8:58 ` Thomas Monjalon
2016-12-01 22:03 ` Jerin Jacob
2016-12-02 1:00 ` Ananyev, Konstantin
2016-12-05 15:03 ` Adrien Mazarguil
2016-12-05 16:43 ` Ananyev, Konstantin
2016-12-05 18:10 ` Adrien Mazarguil
2016-12-06 10:56 ` Ananyev, Konstantin
2016-12-06 13:59 ` Adrien Mazarguil
2016-12-06 20:31 ` Ananyev, Konstantin
2016-12-07 10:08 ` Adrien Mazarguil
2016-11-30 16:34 ` Harish Patil
2016-11-30 17:42 ` Ananyev, Konstantin
2016-11-30 18:26 ` Thomas Monjalon
2016-11-30 21:01 ` Jerin Jacob
2016-12-01 10:50 ` Ferruh Yigit
2016-12-02 23:55 ` Yong Wang
2016-12-04 12:11 ` Ananyev, Konstantin
2016-12-06 18:25 ` Yong Wang
2016-12-07 9:57 ` Ferruh Yigit
2016-12-07 10:03 ` Ananyev, Konstantin
2016-12-07 14:31 ` Alejandro Lucero
2016-12-08 18:20 ` Yong Wang
2016-12-09 14:40 ` Jan Mędala
2016-12-12 15:02 ` Ananyev, Konstantin
2016-12-16 0:15 ` Ananyev, Konstantin
2016-12-16 13:53 ` Jan Mędala
2016-12-16 15:27 ` Ananyev, Konstantin
2016-12-16 15:37 ` Jan Mędala
2016-12-12 17:29 ` Ananyev, Konstantin
2016-11-30 18:39 ` Harish Patil
2016-11-30 19:37 ` Ajit Khaparde
2016-12-01 8:24 ` Rahul Lakkireddy
2016-12-06 15:53 ` Ferruh Yigit
2016-12-07 7:55 ` Andrew Rybchenko
2016-12-07 8:11 ` Yuanhan Liu
2016-12-07 10:13 ` Ananyev, Konstantin
2016-12-07 10:18 ` Yuanhan Liu
2016-12-07 10:22 ` Ananyev, Konstantin
2016-12-13 11:59 ` Ferruh Yigit
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 0/7] " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 1/7] ethdev: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 2/7] e1000: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 3/7] fm10k: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 4/7] i40e: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 5/7] ixgbe: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 6/7] vmxnet3: " Tomasz Kulasek
2016-12-13 18:15 ` Yong Wang
2016-12-20 13:36 ` Ferruh Yigit
2016-12-22 13:10 ` Thomas Monjalon
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 7/7] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 0/8] add Tx preparation Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 1/8] ethdev: " Tomasz Kulasek
2016-12-22 14:24 ` Thomas Monjalon
2016-12-23 18:49 ` Kulasek, TomaszX
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 2/8] e1000: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 3/8] fm10k: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 4/8] i40e: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 5/8] ixgbe: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 6/8] vmxnet3: " Tomasz Kulasek
2016-12-22 17:59 ` Yong Wang
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 7/8] ena: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 14:28 ` Thomas Monjalon
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 1/8] ethdev: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 2/8] e1000: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 3/8] fm10k: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 4/8] i40e: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 5/8] ixgbe: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 6/8] vmxnet3: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 7/8] ena: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2017-01-04 19:41 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Thomas Monjalon
2017-01-05 15:43 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2601191342CEEE43887BDE71AB9772583F0BCD64@irsmsx105.ger.corp.intel.com \
--to=konstantin.ananyev@intel.com \
--cc=dev@dpdk.org \
--cc=tomaszx.kulasek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).