From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: "Doherty, Declan" <declan.doherty@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>,
Thomas Monjalon <thomas@monjalon.net>,
"Shahaf Shuler" <shahafs@mellanox.com>,
"Horton, Remy" <remy.horton@intel.com>,
"Doherty, Declan" <declan.doherty@intel.com>
Subject: Re: [dpdk-dev] [PATCH v7 6/9] ethdev: add common devargs parser
Date: Fri, 20 Apr 2018 13:16:43 +0000 [thread overview]
Message-ID: <2601191342CEEE43887BDE71AB977258AE918C32@IRSMSX102.ger.corp.intel.com> (raw)
In-Reply-To: <20180416130605.6509-7-declan.doherty@intel.com>
> Introduces a new structure, rte_eth_devargs, to support generic
> ethdev arguments common across NET PMDs, with a new API
> rte_eth_devargs_parse API to support PMD parsing these arguments.
>
> Signed-off-by: Remy Horton <remy.horton@intel.com>
> Signed-off-by: Declan Doherty <declan.doherty@intel.com>
> ---
> lib/Makefile | 1 +
> lib/librte_ether/rte_ethdev.c | 195 ++++++++++++++++++++++++++++++++
> lib/librte_ether/rte_ethdev_driver.h | 30 +++++
> lib/librte_ether/rte_ethdev_version.map | 1 +
> 4 files changed, 227 insertions(+)
>
> diff --git a/lib/Makefile b/lib/Makefile
> index ec965a606..4144d99f9 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -21,6 +21,7 @@ DEPDIRS-librte_cmdline := librte_eal
> DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
> DEPDIRS-librte_ether := librte_net librte_eal librte_mempool librte_ring
> DEPDIRS-librte_ether += librte_mbuf
> +DEPDIRS-librte_ether += librte_kvargs
> DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += librte_bbdev
> DEPDIRS-librte_bbdev := librte_eal librte_mempool librte_mbuf
> DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += librte_cryptodev
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 1d38d8e75..a082b211c 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -34,6 +34,7 @@
> #include <rte_errno.h>
> #include <rte_spinlock.h>
> #include <rte_string_fns.h>
> ++#include <rte_kvargs.h>
>
> #include "rte_ether.h"
> #include "rte_ethdev.h"
> @@ -4149,6 +4150,200 @@ rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool)
> return (*dev->dev_ops->pool_ops_supported)(dev, pool);
> }
>
> +typedef int (*rte_eth_devargs_callback_t)(char *str, void *data);
> +
> +static int
> +rte_eth_devargs_tokenise(struct rte_kvargs *arglist, const char *str_in)
> +{
> + int state;
> + struct rte_kvargs_pair *pair;
> + char *letter;
Hmm, so that extends rte_kvarrgs to be able to parse something like: "key=[val1,val2,...,valn]", right?
If so shouldn't it be in rte_kvargs then?
BTW, as I remember rte_kvargs allows you to have multiple identical key, i.e: "key=val1,key=val2,...,key=valn".
I suppose that approach would allow you to avoid rte_kvargs modifications.
> +
> + arglist->str = strdup(str_in);
Who is going to free it?
> + if (arglist->str == NULL)
> + return -ENOMEM;
> +
> + letter = arglist->str;
> + state = 0;
> + arglist->count = 0;
> + pair = &arglist->pairs[0];
> + while (1) {
> + switch (state) {
> + case 0: /* Initial */
> + if (*letter == '=')
> + return -EINVAL;
> + else if (*letter == '\0')
> + return 0;
> +
> + state = 1;
> + pair->key = letter;
> + /* fall-thru */
> +
> + case 1: /* Parsing key */
> + if (*letter == '=') {
> + *letter = '\0';
> + pair->value = letter + 1;
> + state = 2;
> + } else if (*letter == ',' || *letter == '\0')
> + return -EINVAL;
> + break;
> +
> +
> + case 2: /* Parsing value */
> + if (*letter == '[')
> + state = 3;
> + else if (*letter == ',') {
> + *letter = '\0';
> + arglist->count++;
> + pair = &arglist->pairs[arglist->count];
> + state = 0;
> + } else if (*letter == '\0') {
> + letter--;
> + arglist->count++;
> + pair = &arglist->pairs[arglist->count];
> + state = 0;
> + }
> + break;
> +
> + case 3: /* Parsing list */
> + if (*letter == ']')
> + state = 2;
> + else if (*letter == '\0')
> + return -EINVAL;
> + break;
> + }
> + letter++;
> + }
> +}
> +
> +static int
> +rte_eth_devargs_parse_list(char *str, rte_eth_devargs_callback_t callback,
> + void *data)
> +{
> + char *str_start;
> + int state;
> + int result;
> +
> + if (*str != '[')
> + /* Single element, not a list */
> + return callback(str, data);
> +
> + /* Sanity check, then strip the brackets */
> + str_start = &str[strlen(str) - 1];
> + if (*str_start != ']') {
> + RTE_LOG(ERR, EAL, "(%s): List does not end with ']'", str);
> + return -EINVAL;
> + }
> + str++;
> + *str_start = '\0';
> +
> + /* Process list elements */
> + state = 0;
> + while (1) {
> + if (state == 0) {
> + if (*str == '\0')
> + break;
> + if (*str != ',') {
> + str_start = str;
> + state = 1;
> + }
> + } else if (state == 1) {
> + if (*str == ',' || *str == '\0') {
> + if (str > str_start) {
> + /* Non-empty string fragment */
> + *str = '\0';
> + result = callback(str_start, data);
> + if (result < 0)
> + return result;
> + }
> + state = 0;
> + }
> + }
> + str++;
> + }
> + return 0;
> +}
> +
> +static int
> +rte_eth_devargs_process_range(char *str, uint16_t *list, uint16_t *len_list,
> + const uint16_t max_list)
> +{
> + unsigned int lo;
> + unsigned int hi;
> + unsigned int value;
> + int result;
> +
> + result = sscanf(str, "%u-%u", &lo, &hi);
Should probably be %hu.
And probably check that lo and hi values are less than MAX_PORTS.
> + if (result == 1) {
> + if (*len_list >= max_list)
> + return -ENOMEM;
> + list[(*len_list)++] = lo;
> + } else if (result == 2) {
> + if (lo >= hi)
> + return -EINVAL;
> + for (value = lo; value <= hi; value++) {
> + if (*len_list >= max_list)
> + return -ENOMEM;
> + list[(*len_list)++] = value;
> + }
> + } else
> + return -EINVAL;
> + return 0;
> +}
> +
> +static int
> +rte_eth_devargs_parse_ports(char *str, void *data)
> +{
> + struct rte_eth_devargs *eth_da = data;
> +
> + return rte_eth_devargs_process_range(str, eth_da->ports,
> + ð_da->nb_ports, RTE_MAX_ETHPORTS);
> +}
> +
> +
> +static int
> +rte_eth_devargs_parse_representor_ports(char *str, void *data)
> +{
> + struct rte_eth_devargs *eth_da = data;
> +
> + return rte_eth_devargs_process_range(str, eth_da->representor_ports,
> + ð_da->nb_representor_ports, RTE_MAX_ETHPORTS);
> +}
> +
> +int __rte_experimental
> +rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs *eth_da)
> +{
> + struct rte_kvargs args;
> + struct rte_kvargs_pair *pair;
> + unsigned int i;
> + int result;
> +
> + memset(eth_da, 0, sizeof(*eth_da));
> +
> + result = rte_eth_devargs_tokenise(&args, dargs);
> + if (result < 0)
> + return result;
> +
> + for (i = 0; i < args.count; i++) {
> + pair = &args.pairs[i];
> +
> + if (strcmp("port", pair->key) == 0) {
> + result = rte_eth_devargs_parse_list(pair->value,
> + rte_eth_devargs_parse_ports, eth_da);
> + if (result < 0)
> + return result;
> + } else if (strcmp("representor", pair->key) == 0) {
> + result = rte_eth_devargs_parse_list(pair->value,
> + rte_eth_devargs_parse_representor_ports,
> + eth_da);
> + if (result < 0)
> + return result;
> + }
> + }
> +
> + return 0;
> +}
> +
> RTE_INIT(ethdev_init_log);
> static void
> ethdev_init_log(void)
> diff --git a/lib/librte_ether/rte_ethdev_driver.h b/lib/librte_ether/rte_ethdev_driver.h
> index e52add0ad..3bce5747d 100644
> --- a/lib/librte_ether/rte_ethdev_driver.h
> +++ b/lib/librte_ether/rte_ethdev_driver.h
> @@ -189,6 +189,36 @@ rte_eth_linkstatus_get(const struct rte_eth_dev *dev,
> }
>
>
> +/** Generic Ethernet device arguments */
> +struct rte_eth_devargs {
> + uint16_t ports[RTE_MAX_ETHPORTS];
> + /** port/s number to enable on a multi-port single function */
> + uint16_t nb_ports;
> + /** number of ports in ports field */
> + uint16_t representor_ports[RTE_MAX_ETHPORTS];
> + /** representor port/s identifier to enable on device */
> + uint16_t nb_representor_ports;
> + /** number of ports in representor port field */
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * PMD helper function to parse ethdev arguments
> + *
> + * @param devargs
> + * device arguments
> + * @param eth_devargs
> + * parsed ethdev specific arguments.
> + *
> + * @return
> + * Negative errno value on error, 0 on success.
> + */
> +int __rte_experimental
> +rte_eth_devargs_parse(const char *dargs, struct rte_eth_devargs *eth_devargs);
> +
> +
> typedef int (*ethdev_init_t)(struct rte_eth_dev *ethdev, void *init_params);
> typedef int (*ethdev_bus_specific_init)(struct rte_eth_dev *ethdev,
> void *bus_specific_init_params);
> diff --git a/lib/librte_ether/rte_ethdev_version.map b/lib/librte_ether/rte_ethdev_version.map
> index bd7232923..62ecbdb8a 100644
> --- a/lib/librte_ether/rte_ethdev_version.map
> +++ b/lib/librte_ether/rte_ethdev_version.map
> @@ -233,6 +233,7 @@ EXPERIMENTAL {
> EXPERIMENTAL {
> global:
>
> + rt_eth_devargs_parse;
> rte_eth_dev_create;
> rte_eth_dev_destroy;
>
> --
> 2.14.3
next prev parent reply other threads:[~2018-04-20 13:16 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 13:54 [dpdk-dev] [PATCH v6 0/7] switching device representation Declan Doherty
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 1/8] doc: add switch representation documentation Declan Doherty
2018-03-28 14:53 ` Thomas Monjalon
2018-03-28 15:05 ` Doherty, Declan
2018-04-03 15:52 ` Adrien Mazarguil
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 2/8] ethdev: add switch identifier parameter to port Declan Doherty
2018-03-29 6:13 ` Shahaf Shuler
2018-03-29 9:13 ` Doherty, Declan
2018-03-29 10:12 ` Shahaf Shuler
2018-03-29 15:12 ` Doherty, Declan
2018-04-01 6:10 ` Shahaf Shuler
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 3/8] ethdev: add generic create/destroy ethdev APIs Declan Doherty
2018-03-29 6:13 ` Shahaf Shuler
2018-03-29 9:22 ` Doherty, Declan
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 4/8] ethdev: Add port representor device flag Declan Doherty
2018-03-29 6:13 ` Shahaf Shuler
2018-03-29 7:34 ` Thomas Monjalon
2018-03-29 14:53 ` Doherty, Declan
2018-04-01 6:14 ` Shahaf Shuler
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 5/8] app/testpmd: add port name to device info Declan Doherty
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 6/8] ethdev: add common devargs parser Declan Doherty
2018-03-29 12:12 ` Gaëtan Rivet
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 7/8] net/i40e: add support for representor ports Declan Doherty
2018-03-28 13:54 ` [dpdk-dev] [PATCH v6 8/8] net/ixgbe: " Declan Doherty
2018-04-16 13:05 ` [dpdk-dev] [PATCH v7 0/9] switching devices representation Declan Doherty
2018-04-16 13:05 ` [dpdk-dev] [PATCH v7 1/9] doc: add switch representation documentation Declan Doherty
2018-04-16 15:55 ` Kovacevic, Marko
2018-04-16 13:05 ` [dpdk-dev] [PATCH v7 2/9] ethdev: add switch identifier parameter to port Declan Doherty
2018-04-24 16:38 ` Thomas Monjalon
2018-04-16 13:05 ` [dpdk-dev] [PATCH v7 3/9] ethdev: add generic create/destroy ethdev APIs Declan Doherty
2018-04-20 13:01 ` Ananyev, Konstantin
2018-04-24 17:48 ` Thomas Monjalon
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 4/9] ethdev: Add port representor device flag Declan Doherty
2018-04-24 19:37 ` Thomas Monjalon
2018-04-25 12:17 ` Doherty, Declan
2018-04-25 12:23 ` Thomas Monjalon
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 5/9] app/testpmd: add port name to device info Declan Doherty
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 6/9] ethdev: add common devargs parser Declan Doherty
2018-04-20 13:16 ` Ananyev, Konstantin [this message]
2018-04-24 19:53 ` Thomas Monjalon
2018-04-25 9:40 ` Remy Horton
2018-04-25 10:06 ` Thomas Monjalon
2018-04-25 10:45 ` Remy Horton
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 7/9] ethdev: add switch domain allocator Declan Doherty
2018-04-20 13:22 ` Ananyev, Konstantin
2018-04-24 19:58 ` Thomas Monjalon
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 8/9] net/i40e: add support for representor ports Declan Doherty
2018-04-16 13:06 ` [dpdk-dev] [PATCH v7 9/9] net/ixgbe: " Declan Doherty
2018-04-20 13:29 ` Ananyev, Konstantin
2018-04-26 10:40 ` [dpdk-dev] [dpdk=-dev][PATCH v8 0/9] switching devices representation Declan Doherty
2018-04-26 10:40 ` [dpdk-dev] [PATCH v8 1/9] doc: add switch representation documentation Declan Doherty
2018-04-26 10:40 ` [dpdk-dev] [PATCH v8 2/9] ethdev: add switch identifier parameter to port Declan Doherty
2018-04-26 12:02 ` Thomas Monjalon
2018-04-26 14:26 ` Thomas Monjalon
2018-04-27 16:29 ` Ferruh Yigit
2018-04-26 10:40 ` [dpdk-dev] [PATCH v8 3/9] ethdev: add generic create/destroy ethdev APIs Declan Doherty
2018-04-26 12:16 ` Ferruh Yigit
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 4/9] ethdev: Add port representor device flag Declan Doherty
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 5/9] app/testpmd: add port name to device info Declan Doherty
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 6/9] ethdev: add common devargs parser Declan Doherty
2018-04-26 12:03 ` Ananyev, Konstantin
2018-04-26 14:21 ` Ferruh Yigit
2018-04-26 14:28 ` Doherty, Declan
2018-04-26 14:44 ` Thomas Monjalon
2018-04-26 14:48 ` Ananyev, Konstantin
2018-04-26 14:30 ` Remy Horton
2018-04-26 12:15 ` Ferruh Yigit
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 7/9] ethdev: add switch domain allocator Declan Doherty
2018-04-26 12:27 ` Ananyev, Konstantin
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 8/9] net/i40e: add support for representor ports Declan Doherty
2018-04-26 10:41 ` [dpdk-dev] [PATCH v8 9/9] net/ixgbe: " Declan Doherty
2018-04-26 16:24 ` [dpdk-dev] [dpdk=-dev][PATCH v8 0/9] switching devices representation Ferruh Yigit
2018-04-26 16:35 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2601191342CEEE43887BDE71AB977258AE918C32@IRSMSX102.ger.corp.intel.com \
--to=konstantin.ananyev@intel.com \
--cc=adrien.mazarguil@6wind.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=remy.horton@intel.com \
--cc=shahafs@mellanox.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).